rp2
The PIO class gives access to an instance of the RP2040's PIO (programmable I/O) interface.
The preferred way to interact with PIO is using rp2.StateMachine, the PIO class is for advanced use.
For assembling PIO programs, see rp2.asm_pio.
Gets the PIO instance numbered id. The RP2040 has two PIO instances, numbered 0 and 1.
Raises a ValueError if any other argument is provided.
PIO.add_program(program)
Add the program to the instruction memory of this PIO instance.
The amount of memory available for programs on each PIO instance is limited. If there isn't enough space left in the PIO's program memory this method will raise OSError(ENOMEM).
PIO.remove_program([program])
Remove program from the instruction memory of this PIO instance.
If no program is provided, it removes all programs.
It is not an error to remove a program which has already been removed.
PIO.state_machine(id, [program, ...])
Gets the state machine numbered id. On the RP2040, each PIO instance has four state machines, numbered 0 to 3.
Optionally initialize it with a program: see StateMachine.init.
>>> rp2.PIO(1).state_machine(3) StateMachine(7)
PIO.irq(handler=None, trigger=IRQ_SM0IRQ_SM2|IRQ_SM3, hard=False)
Returns the IRQ object for this PIO instance.
MicroPython only uses IRQ 0 on each PIO instance. IRQ 1 is not available.
Optionally configure it.
PIO.IN_LOW PIO.IN_HIGH PIO.OUT_LOW PIO.OUT_HIGH
These constants are used for the out_init, set_init, and sideset_init arguments to asm_pio.
PIO.SHIFT_LEFT PIO.SHIFT_RIGHT
These constants are used for the in_shiftdir and out_shiftdir arguments to asm_pio or StateMachine.init.
PIO.JOIN_NONE PIO.JOIN_TX PIO.JOIN_RX
These constants are used for the fifo_join argument to asm_pio.
PIO.IRQ_SM0 PIO.IRQ_SM1 PIO.IRQ_SM2 PIO.IRQ_SM3
These constants are used for the trigger argument to PIO.irq.