archive_project documentation fails with some urls

[ferdymercury]

For example:
https://www.infineon.com/dgdl/irf7601pbf.pdf?fileId=5546d462533600a4015356038df01c74
This is because of three reasons:

• it calls the function .lower() and changes fileId to fileid
• it does not accept urls if thy do not end with .pdf
• it gives then the error 403 forbidden

[ferdymercury]

Using the "requests" package from python3 solves all these issues. My new version also supports non-pdf filenames. See below.

from __future__ import absolute_import, division, print_function
import pcbnew
import os
import os.path
import shutil
import sys
import logging
import re
import hashlib
from shutil import copyfile
try:
    from urllib import urlretrieve
except:
    from urllib.request import urlretrieve
import urllib
import requests

logger = logging.getLogger(__name__)

# get version information
version_filename = os.path.join(os.path.dirname(os.path.realpath(__file__)), "version.txt")
with open(version_filename) as f:
    VERSION = f.readline().strip()

# > V5.1.5 and V 5.99 build information
if hasattr(pcbnew, 'GetBuildVersion'):
    BUILD_VERSION = pcbnew.GetBuildVersion()
else:
    BUILD_VERSION = "Unknown"


def balanced_braces(args):
    if isinstance(args, str):
        args = [args]
    parts = []
    for arg in args:
        if '(' not in arg:
            continue
        chars = []
        n = 0
        for c in arg:
            if c == '(':
                if n > 0:
                    chars.append(c)
                n += 1
            elif c == ')':
                n -= 1
                if n > 0:
                    chars.append(c)
                elif n == 0:
                    parts.append(''.join(chars).lstrip().rstrip())
                    chars = []
            elif n > 0:
                chars.append(c)
    return parts


def remove_braced_content(args):
    if isinstance(args, str):
        args = [args]
    parts = []
    for arg in args:
        if '(' not in arg:
            continue
        chars = []
        n = 0
        for c in arg:
            if c == '(':
                n += 1
            elif c == ')':
                n -= 1
                if n == 0:
                    parts.append(''.join(chars).lstrip().rstrip())
                    chars = []
            elif n == 0:
                chars.append(c)
    return " ".join(parts)


def extract_subsheets(filename):
    with open(filename) as f:
        file_folder = os.path.dirname(os.path.abspath(filename))
        file_lines = f.read()
    # alternative solution
    # extract all sheet references
    sheet_indices = [m.start() for m in re.finditer('\$Sheet', file_lines)]
    endsheet_indices = [m.start() for m in re.finditer('\$EndSheet', file_lines)]

    if len(sheet_indices) != len(endsheet_indices):
        raise LookupError("Schematic page contains errors")

    sheet_locations = zip(sheet_indices, endsheet_indices)
    for sheet_location in sheet_locations:
        sheet_reference = file_lines[sheet_location[0]:sheet_location[1]].split('\n')
        for line in sheet_reference:
            if line.startswith('F1 '):
                subsheet_path = line.split("\"")[1]
                subsheet_line = file_lines.split("\n").index(line)

                if not os.path.isabs(subsheet_path):
                    # check if path is encoded with variables
                    if "${" in subsheet_path:
                        start_index = subsheet_path.find("${") + 2
                        end_index = subsheet_path.find("}")
                        env_var = subsheet_path[start_index:end_index]
                        path = os.getenv(env_var)
                        # if variable is not defined rasie an exception
                        if path is None:
                            raise LookupError("Can not find subsheet: " + subsheet_path)
                        # replace variable with full path
                        subsheet_path = subsheet_path.replace("${", "") \
                            .replace("}", "") \
                            .replace("env_var", path)

                # if path is still not absolute, then it is relative to project
                if not os.path.isabs(subsheet_path):
                    subsheet_path = os.path.join(file_folder, subsheet_path)

                subsheet_path = os.path.normpath(subsheet_path)
                # found subsheet reference go for the next one, no need to parse further
                break
        yield subsheet_path, subsheet_line


def find_all_sch_files(filename, list_of_files):
    list_of_files.append(filename)

    for sheet, line_nr in extract_subsheets(filename):
        logger.info("found subsheet:\n\t" + sheet +
                    "\n\t in:\n\t" + filename + ", line: " + str(line_nr))
        seznam = find_all_sch_files(sheet, list_of_files)
        list_of_files = seznam
    return list_of_files


def archive_worksheet(board):
    logger.info("Starting to archive worksheets")
    # get project name
    pcb_filename = os.path.abspath(board.GetFileName())
    project_name = pcb_filename.replace(".kicad_pcb", ".pro")
    project_dir = os.path.dirname(project_name)
    # open project file
    with open(project_name) as f:
        project_file = f.readlines()

    # find worksheet entry
    for line_index in range(len(project_file)):
        line = project_file[line_index]
        if line.startswith("PageLayoutDescrFile="):
            file_descriptor = line.lstrip("PageLayoutDescrFile=").rstrip()
            logger.info("Found worksheet entry: " + file_descriptor + " at line: " + str(line_index))
            worksheet_path = os.path.abspath(file_descriptor)
            logger.info("Full worksheet path: " + worksheet_path)

            if not os.path.isfile(worksheet_path):
                logger.info("Worksheet file does not exist")
                # I don't dare to change the project file in this case
                continue
            logger.info("Worksheet file does exist")

            # try to open the file to see if we've got read access
            try:
                with open(worksheet_path) as f:
                    logger.info("Worksheet file exists and we can read it")
            except IOError:
                logger.info("Worksheet file exists but is not accessible")
                raise IOError

            worksheet_filename = os.path.basename(worksheet_path)
            line_index = project_file.index(line)

            # copy worksheet to local path
            destination_path = os.path.join(project_dir, worksheet_filename)
            try:
                shutil.copy2(worksheet_path, os.path.join(project_dir, destination_path))
            except shutil.Error:
                logger.info("Destination file: " + destination_path + " already exists.")
            except OSError as e:
                logger.info("Source file: " + worksheet_path + " does not exist.")
                raise e
            except IOError as e:
                logger.info("Can not access the source file: " + worksheet_path)
                raise e

            # try writing the project file
            new_line = "PageLayoutDescrFile=" + worksheet_filename + "\n"
            project_file[line_index] = new_line

    with open(project_name, "w") as f:
        f.writelines(project_file)

def filename_from_headers(headers):
    """Detect filename from Content-Disposition headers if present.
    http://greenbytes.de/tech/tc2231/
    :param: headers as dict, list or string
    :return: filename from content-disposition header or None
    """
    if type(headers) == str:
        headers = headers.splitlines()
    if type(headers) == list:
        headers = dict([x.split(':', 1) for x in headers])
    cdisp = headers.get("Content-Disposition")
    if not cdisp:
        return None
    cdtype = cdisp.split(';')
    if len(cdtype) == 1:
        return None
    if cdtype[0].strip().lower() not in ('inline', 'attachment'):
        return None
    # several filename params is illegal, but just in case
    fnames = [x for x in cdtype[1:] if x.strip().startswith('filename=')]
    if len(fnames) > 1:
        return None
    name = fnames[0].split('=')[1].strip(' \t"')
    name = os.path.basename(name)
    if not name:
        return None
    return name

def filename_from_url(url):
    """:return: detected filename or None"""
    fname = os.path.basename(urllib.parse.urlparse(url).path)
    if len(fname.strip(" \n\t.")) == 0:
        return None
    return fname

def archive_symbols(board, allow_missing_libraries=False, alt_files=False, archive_documentation=False):
    global __name__
    logger.info("Starting to archive symbols")
    # get project name
    pcb_filename = board.GetFileName()
    project_name = str(os.path.basename(board.GetFileName())).replace(".kicad_pcb", "")
    cache_lib_name = project_name + "-cache.lib"
    archive_lib_name = project_name + "-archive.lib"

    logger.info("Pcb filename:" + pcb_filename)

    # list of failed documentation file accesses
    documentation_failed = []

    # load system symbol library table
    if __name__ != "__main__":
        sys_path = os.path.normpath(pcbnew.GetKicadConfigPath())
    else:
        # hardcode the path for my machine - testing works only on my machine
        sys_path = os.path.normpath("C://Users//MitjaN//AppData//Roaming//kicad")

    logger.info("Kicad config path: " + sys_path)

    global_sym_lib_file_path = os.path.normpath(sys_path + "//sym-lib-table")
    try:
        with open(global_sym_lib_file_path) as f:
            global_sym_lib_file = f.readlines()
    except IOError:
        logger.info("Global sym-lib-table does not exist!")
        raise IOError("Global sym-lib-table does not exist!")

    # get library nicknames and dictionary of libraries (nickame:uri)
    libraries = {}
    nicknames = []
    for line in global_sym_lib_file:
        nick_start = line.find("(name ")+6
        if nick_start >= 6:
            nick_stop = line.find(")", nick_start)
            nick = line[nick_start:nick_stop]
            nicknames.append(nick)
            # find path to library
            path_start = line.find("(uri ")+5
            if path_start >= 5:
                path_stop = line.find(")", path_start)
                path = line[path_start:path_stop]
                libraries[path] = nick

    # load project library table
    proj_path = os.path.dirname(os.path.abspath(board.GetFileName()))
    proj_sym_lib_file_path = os.path.normpath(proj_path + "//sym-lib-table")
    try:
        with open(proj_sym_lib_file_path) as f:
            project_sym_lib_file = f.readlines()
    # if file does not exists, create new
    except IOError:
        logger.info("Project sym lib table does not exist")
        new_sym_lib_file = [u"(sym_lib_table\n", u")\n"]
        with open(proj_sym_lib_file_path, "w") as f:
            f.writelines(new_sym_lib_file)
            project_sym_lib_file = new_sym_lib_file
    # append nicknames
    for line in project_sym_lib_file:
        nick_start = line.find("(name ")+6
        if nick_start >= 6:
            nick_stop = line.find(")", nick_start)
            nick = line[nick_start:nick_stop]
            nicknames.append(nick)

            path_start = line.find("(uri ")+5
            if path_start >= 5:
                path_stop = line.find(")", path_start)
                path = line[path_start:path_stop]
                libraries[path] = nick

    # check if archive library is already linked in
    archive_nick = None
    for lib in libraries.keys():
        # if archive is already linked in, use its nickname
        if archive_lib_name in lib:
            logger.info("project-archive.lib is already in the sym-lib-table, using its nickname")
            archive_nick = libraries[lib]
            break
        # if archive is not linked
        else:
            # check if default nick is already taken
            if libraries[lib] == "archive":
                logger.info("Nickname \"archive\" already taken")
                raise ValueError("Nickname \"archive\" already taken by library that is not a project cache library!")

    if archive_nick is None:
        archive_nick = "archive"
        logger.info("Entering archive library in sym-lib-table")
        line_contents = "    (lib (name archive)(type Legacy)(uri \"${KIPRJMOD}/" + archive_lib_name + "\")(options \"\")(descr \"\"))\n"
        project_sym_lib_file.insert(1, line_contents)
        with open(proj_sym_lib_file_path, "w") as f:
            f.writelines(project_sym_lib_file)

    # copy cache library and overwrite acrhive library, if it exists
    if not os.path.isfile(os.path.join(proj_path, cache_lib_name)):
        logger.info("Project cache library does not exists!")
        raise IOError("Project cache library does not exists!")
    copyfile(os.path.join(proj_path, cache_lib_name),
             os.path.join(proj_path, archive_lib_name))

    if os.path.isfile(os.path.join(proj_path, cache_lib_name.replace(".lib", ".dcm"))):
        copyfile(os.path.join(proj_path, cache_lib_name.replace(".lib", ".dcm")),
                 os.path.join(proj_path, archive_lib_name.replace(".lib", ".dcm")))

    # read_archive library
    with open(os.path.join(proj_path, archive_lib_name)) as f:
        project_archive_file = f.readlines()

    # first find all symbols in the library
    symbols_list = []
    for line in project_archive_file:
        line_contents = line.split()
        if line_contents[0] == "DEF":
            symbols_list.append(line_contents[1].replace("~", ""))

    # find all symbol references and replace them with correct ones
    new_symbol_list = []
    for symbol in symbols_list:
        # modify the symbol reference
        if symbol.startswith(archive_nick):
            new_symbol = symbol.replace(archive_nick+":", "")
            new_symbol = symbol.replace(archive_nick+"_", "")
        else:
            new_symbol = symbol.replace(":", "_")
        new_symbol_list.append(new_symbol)
        for line in project_archive_file:
            index = project_archive_file.index(line)
            if symbol in line and not line.startswith("F2"):
                project_archive_file[index] = line.replace(symbol, new_symbol)

    # scan for duplicate symbols and remove them
    # TODO
    start_indeces = []
    stop_indeces = []
    for index, line in enumerate(project_archive_file):
        if line.startswith("DEF"):
            start_indeces.append(index-3)
        if line.startswith("ENDDEF"):
            stop_indeces.append(index+1)
    component_locations = zip(start_indeces, stop_indeces)

    # first add initial lines
    project_archive_file_output = project_archive_file[0:start_indeces[0]]
    # then only add components which are not duplicated
    tested_components_hash = set()
    for loc in component_locations:
        component = project_archive_file[loc[0]:loc[1]]
        hash_value = hashlib.md5("".join(component).encode('utf-8')).hexdigest()
        if hash_value not in tested_components_hash:
            tested_components_hash.add(hash_value)
            project_archive_file_output.extend(project_archive_file[loc[0]:loc[1]])
        else:
            print("found one duplicate")
    # add remaining lines
    project_archive_file_output.extend(project_archive_file[stop_indeces[-1]:])

    # writeback the archive file
    with open(os.path.join(proj_path, archive_lib_name), "w") as f:
        f.writelines(project_archive_file_output)

    archive_symbols_list = []
    for sym in new_symbol_list:
        if sym.startswith(archive_nick):
            archive_symbols_list.append(sym.split(':', 1)[-1])
        else:
            archive_symbols_list.append(sym.replace(":","_"))
    archive_symbols_list = list(set(archive_symbols_list))

    # find all .sch files
    # open main schematics file and look fo any sbuhiearchical files. In any subhierachical file scan for any sub-sub
    main_sch_file = os.path.abspath(str(pcb_filename).replace(".kicad_pcb", ".sch"))

    all_sch_files = []
    all_sch_files = find_all_sch_files(main_sch_file, all_sch_files)
    all_sch_files = list(set(all_sch_files))

    logger.info("found all subsheets")
    # go through each .sch file
    out_files = {}
    symbols_form_missing_libraries = set()
    for filename in all_sch_files:
        out_files[filename] = []
        with open(filename) as f:
            sch_file = f.readlines()
            logger.info("Archiving file: " + filename)

        # go throught the symbols only
        def_indices = []
        enddef_indices = []
        for index, line in enumerate(sch_file):
            if line.startswith('$Comp'):
                def_indices.append(index)
            if line.startswith('$EndComp'):
                enddef_indices.append(index)
        if len(def_indices) != len(enddef_indices):
            logger.info("Cache library contains errors")
            raise LookupError("Cache library contains errors")
        symbol_locations = zip(def_indices, enddef_indices)

        sch_file_out = []
        # find line starting with L and next word until colon mathes library nickname
        for index, line in enumerate(sch_file):

            line_contents = line.split()
            # if line is within the componend description and line denotes a symbol label
            for sym_loc in symbol_locations:
                if (sym_loc[0] < index) and (index < sym_loc[1]):
                    break
            # if line begins with L it is the library reference
            if line_contents[0] == "L":
                libraryname = line_contents[1].split(":")[0]
                symbolname = line_contents[1].split(":")[1]
                # replace colon with underscore
                if libraryname == archive_nick:
                    new_name = symbolname.split(archive_nick+'_', 1)[-1]
                else:
                    new_name = line_contents[1].replace(":", "_")

                # make sure that the symbol is in cache and append cache nickname
                if new_name in archive_symbols_list:
                    line_contents[1] = archive_nick + ":" + new_name
                # if the symbol is not in cache raise exception
                else:
                    logger.info("Trying to remap symbol which does not exist in archive library. Archive library is incomplete")
                    raise LookupError(
                        "Symbol \"" + new_name + "\" is not present in archive libray. Archive library is incomplete")
                # join line back again
                new_line = ' '.join(line_contents)
                sch_file_out.append(new_line + "\n")

                # symbol is not from the library present on the system markit for the potential errormessage
                if libraryname not in nicknames:
                    symbols_form_missing_libraries.add(symbolname)
            # if it begins with F3 it might be a data sheet entry
            elif line_contents[0] == "F" and line_contents[1] == "3" and archive_documentation is True:
                link = line_contents[2].rstrip('"').lstrip('"')
                if len(link) > 10:
                    logger.info("Trying to archive documentation file: " + link)
                    # if it is an url
                    if link.startswith("http") or link.startswith("https") or link.startswith("www"):

                        logger.info("File is encoded with URL")

                        destination_dir = os.path.join(proj_path, "documentation")
                        # check if folder exists
                        if not os.path.exists(destination_dir):
                            os.mkdir(destination_dir)

                        try:
                            # download file
                            logger.info("Downloading file")

                            r = requests.get(link)
                            if 'Content-Disposition' in r.headers:# ~ https://stackoverflow.com/questions/31804799/how-to-get-pdf-filename-with-python-requests
                                doc_filename = filename_from_headers(r.headers)
                            else:
                                doc_filename = filename_from_url(link)

                            with open(os.path.join(destination_dir,doc_filename), 'wb') as outfile:
                                outfile.write(r.content)

                            # remap the entry
                            logger.info("Remapping documenation entry")
                            line_contents[2] = "\"" + "${KIPRJMOD}/documentation/" + doc_filename + "\""
                            new_line = ' '.join(line_contents)
                            sch_file_out.append(new_line + "\n")
                        except Exception as e:
                            logger.info(e)
                            logger.info("Failed to download file")
                            documentation_failed.append(link)
                            sch_file_out.append(line)
                            pass

                    # otherwise it is a filepath
                    else:
                        logger.info("File is encoded with filepath")
                        clean_model_path = os.path.normpath(link.strip("\""))
                        # check if it can be expanded via accessible environment variables
                        if "${" in clean_model_path or "$(" in clean_model_path:
                            start_index = clean_model_path.find("${")+2 or clean_model_path.find("$(")+2
                            end_index = clean_model_path.find("}") or clean_model_path.find(")")
                            env_var = clean_model_path[start_index:end_index]
                            if env_var == "KIPRJMOD":
                                path = proj_path
                            else:
                                path = os.getenv(env_var)
                            # if variable is defined, find proper model path
                            if path is not None:
                                logger.info("File had enviroment variable")
                                clean_model_path = os.path.normpath(path+clean_model_path[end_index+1:])
                            # if variable is not defined, we can not find the model. Thus don't put it on the list
                            else:
                                logger.info("Can not find documentation defined with enviroment variable:\n" + link)

                        try:
                            # copy the file localy
                            logger.info("Trying to copy the file")
                            doc_filename = os.path.basename(clean_model_path)
                            destination_dir = os.path.join(proj_path, "documentation")
                            destination_path = os.path.join(destination_dir, doc_filename)
                            shutil.copy2(clean_model_path, destination_path)
                            # and remap the entry
                            logger.info("Remapping documenation entry")
                            line_contents[2] = "\"" + "${KIPRJMOD}/documentation/" + doc_filename + "\""
                            new_line = ' '.join(line_contents)
                            sch_file_out.append(new_line + "\n")
                        # src and dest are the same
                        except shutil.Error:
                            logger.info("File has already been archived")
                            documentation_failed.append(link)
                            sch_file_out.append(line)
                        # file not found
                        except (OSError, IOError) as e:
                            logger.info("Failed to copy file")
                            documentation_failed.append(link)
                            sch_file_out.append(line)
                else:
                    sch_file_out.append(line)
            # othrerwise, just copy the line
            else:
                sch_file_out.append(line)
        # prepare for writing
        out_files[filename] = sch_file_out

    if symbols_form_missing_libraries:
        if not allow_missing_libraries:
            logger.info("Schematics includes symbols from the libraries not present on the system\n"
                        "Did Not Find:\n" + "\n".join(symbols_form_missing_libraries))
            raise NameError("Schematics includes symbols from the libraries not present on the system\n"
                            "Did Not Find:\n" + "\n".join(symbols_form_missing_libraries))

    # if no exceptions has been raised write files
    logger.info("Writing schematics file(s)")
    for key in out_files:
        filename = key
        # write
        if alt_files:
            filename = filename.replace(".sch", "_temp.sch")
        with open(filename, "w") as f:
            f.writelines(out_files[key])

    # if not testing, delete cache file
    if not alt_files:
        os.remove(os.path.join(proj_path, cache_lib_name))


def archive_3D_models(board, allow_missing_models=False, alt_files=False):
    logger.info("Starting to archive 3D models")

    path_3d = os.getenv("KISYS3DMOD")
    if path_3d is not None:
        model_library_path = os.path.normpath(path_3d)
    else:
        model_library_path = None

    # if running standalone, enviroment variables might not be set
    if model_library_path is None:
        # hardcode the path for my machine - testing works only on my machine
        model_library_path = os.path.normpath("D://Mitja//Plate//Kicad_libs//official_libs//Packages3D")
    logger.info("KISYS3DMOD path: " + model_library_path)

    # prepare folder for 3dmodels
    proj_path = os.path.dirname(os.path.abspath(board.GetFileName()))
    if alt_files:
        model_folder_path = os.path.normpath(proj_path + "//shapes3D_temp")
    else:
        model_folder_path = os.path.normpath(proj_path + "//shapes3D")
    if not os.path.exists(model_folder_path):
        os.makedirs(model_folder_path)

    # get all modules
    modules = board.GetModules()

    # go through all modules
    not_copied = []
    for mod in modules:
        logger.debug("Getting 3D models for footprint of: " + mod.GetReference())
        # find all 3D models linked to module(footprint)
        models = mod.Models()
        # go thorugh all models bound to module
        # bad python API
        nr_models = range(len(models))
        for index in nr_models:
            # pop one module from the list
            model = models.pop()
            # copy 3D model
            model_path = model.m_Filename
            logger.debug("Trying to copy: " + model_path)

            # check if path is encoded with variables
            if "${" in model_path or "$(" in model_path:
                start_index = model_path.find("${")+2 or model_path.find("$(")+2
                end_index = model_path.find("}") or model_path.find(")")
                env_var = model_path[start_index:end_index]
                if env_var != "KISYS3DMOD":
                    global __name__
                    if __name__ == "__main__":
                        if env_var == "KIPRJMOD":
                            path = os.path.abspath(os.path.dirname(board.GetFileName()))
                    else:
                        path = os.getenv(env_var)
                else:
                    path = model_library_path
                # if variable is defined, find proper model path
                if path is not None:
                    clean_model_path = os.path.normpath(path+model_path[end_index+1:])
                # if variable is not defined, we can not find the model. Thus don't put it on the list
                else:
                    logger.info("Can not find model defined with enviroment variable:\n" + model_path)
            # check if there is no path (model is local to project
            elif model_path == os.path.basename(model_path):
                clean_model_path = os.path.normpath(proj_path + "//" + model_path)
            # check if model is given with absolute path
            elif os.path.exists(model_path):
                clean_model_path = model_path
            # otherwise we don't know how to parse the path ignorring it
            else:
                logger.info("Ambiguios path for the model: " + model_path)
                clean_model_path = os.path.normpath(os.path.join(model_library_path,model_path))
                logger.info("Going with: " + clean_model_path)

            # copy model
            copied_at_least_one = False
            if clean_model_path:
                model_without_extension = clean_model_path.rsplit('.', 1)[0]
                for ext in ['.wrl', '.stp', '.step', '.igs']:
                    try:
                        shutil.copy2(model_without_extension + ext, model_folder_path)
                        copied_at_least_one = True
                    # src and dest are the same
                    except shutil.Error:
                        copied_at_least_one = True
                    # file not found
                    except (OSError, IOError):
                        pass

            if not copied_at_least_one:
                logger.debug("Did not copy: " + model.m_Filename)
                not_copied.append(model.m_Filename)

            if copied_at_least_one or allow_missing_models:
                logger.debug("Remapping: " + model.m_Filename)
                filename = os.path.basename(clean_model_path)
                new_path = "${KIPRJMOD}/shapes3D/" + filename
                model.m_Filename = new_path

            # and push it to the back of the list (changed or unchaged)
            models.push_back(model)

    if not_copied:
        if not allow_missing_models:
            not_copied_pretty = [os.path.normpath(x) for x in not_copied]
            logger.info("Did not succeed to copy 3D models!")
            raise IOError("Did not succeed to copy 3D models!\n"
                          "Did not find:\n" + "\n".join(not_copied_pretty))
        else:
            logger.info("Succeed to copy 3D models but some missing!")
    else:
        logger.info("Succeed to copy 3D models!")


def main():
    board = pcbnew.LoadBoard('fresh_test_project/archive_test_project.kicad_pcb')
    #board = pcbnew.LoadBoard('archived_test_project/archive_test_project.kicad_pcb')
    try:
        archive_symbols(board, allow_missing_libraries=True, alt_files=True, archive_documentation=True)
    except (ValueError, IOError, LookupError) as error:
        print(str(error))
    except NameError as error:
        print(str(error))

    archive_worksheet(board)

    try:
        archive_3D_models(board, allow_missing_models=False, alt_files=True)
    except IOError as error:
        archive_3D_models(board, allow_missing_models=True, alt_files=True)
        print(str(error))

    saved = pcbnew.SaveBoard(board.GetFileName().replace(".kicad_pcb", "_temp.kicad_pcb"), board)


# for testing purposes only
if __name__ == "__main__":
    # if debugging outside of this folder change the folder
    os.chdir(os.path.dirname(os.path.realpath(__file__)))

    file_handler = logging.FileHandler(filename='archive_project.log', mode='w')
    stdout_handler = logging.StreamHandler(sys.stdout)
    handlers = [file_handler, stdout_handler]
    # handlers = [file_handler]

    logging.basicConfig(level=logging.DEBUG,
                        format='%(asctime)s %(name)s %(lineno)d:%(message)s',
                        datefmt='%m-%d %H:%M:%S',
                        handlers=handlers
                        )

    logger = logging.getLogger(__name__)
    logger.info("Plugin executed on: " + repr(sys.platform))
    logger.info("Plugin executed with python version: " + repr(sys.version))
    logger.info("KiCad build version: " + BUILD_VERSION)
    logger.info("Archive plugin version: " + VERSION + " started in standalone mode")

    main()

[MitjaNemec]

Thanks for reporting the issue and for providing the workaround. I'll look into it but I'll need to make sure it works with python2 (Windows and macOS). But this might take some time as I currently don't have much free time available.