Replies: 6 comments 5 replies
-
|
Looking at the LOG file from your 1st post, you did not patch the unit, just run addFec. You might have started a recovery, however the LOG is not complete here. `search JTH-07620.07.17340503CA Backup File MU1326-ifs-root-part2-0x00ba0000.ifs [flashlock] unlocking flash: DONEFlashing on OFFSET 0x00ba0000... There will be no further output until flash is finished! ` |
Beta Was this translation helpful? Give feedback.
-
|
How can I recover the system? Do you have a link to the information to perform that recovery? Can it be recovered via D-Link using a script like the link information I wrote above? |
Beta Was this translation helpful? Give feedback.
-
|
Check mibwiki.one there are some instruction. If that can not connect anymore maybe UART. START with D-Link. |
Beta Was this translation helpful? Give feedback.
-
|
solved, thanks |
Beta Was this translation helpful? Give feedback.
-
|
I have another query: In this family we have another Audi TT model, it has 2 USB inputs but it is not equipped with navigation, it does not have the NAVI symbol on the screen, and it only has the wide screen in the copckit, and I think that with M.I.B it is possible to add the navigation option to it Please tell me what the procedure would be. Of course, first the backup, then the patching, and after checking on the screen that the map and navigation FECs have been added, use the "navigation activation" function and them load the map file? Can you tell me what it would be in order, or if there is another element that I have to activate or add. Thank you |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Just run the AIO patch. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, thanks |
Beta Was this translation helpful? Give feedback.
-
|
Hi in the Audi TT, I have been able to activate the navigation function and load the 2023/2024 map, but to use the navigation function I can only do it through voice recognition, with the steering wheel key, the navigation icon does not appear on the screen, and I cannot access it either to navigation using the Map/Nav key on the keyboard. Do you know of a way to make the navigation icon appear on the screen?, or that it can be accessed using the Nav/map key on the central keyboard? The other problem that I have is that the map is not shown in panoramic view, there are only indicative arrows on the right side of the copkit, I suppose that the view mode will depend on some configuration to be carried out through ODIS, if you know something about this, I would appreciate the information. |
Beta Was this translation helpful? Give feedback.
-
|
Actually the solution for everything to work correctly would be:
I think that all this could be done through the VCDS program, with some long code, or with some coding in the Dashboard section, any information will be appreciated. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @Vengo222 how did you succeed to fix the problem with navigation stuck 11% issue ? |
Beta Was this translation helpful? Give feedback.
-
Hi
I have an Audi A3 to which I updated the firmware to the firmware version MHI2_ER_AU37x_P5089 before patching with M.I.B, after a cold start it hangs at 11% initializing the navigation, it does not restart, but it does not respond to any key, it does not restart, it just remains locked at 11%
After installing M.I.B to patch the unit and update maps, in the fecs list the line 023000EE appears in an illegal state, to try to solve the problem, I restored feccontainer from M.I.B, but this did not solve the illegal state of the line either, so I uninstalled M.I.B, to do a clean installation the next day, but in the morning the navigation does not start, the screen stays at 11% of the navigation start, and no key works, nothing works... How can I solve the problem?, I made a backup on the SD Card.
attached log
MU1326-JTH-07620.07.17340503CA.log
Beta Was this translation helpful? Give feedback.
All reactions