MODULE utilities_mod

Overview

Provides a number of tools used by most DART modules including tools for file IO, diagnostic tools for registering modules and recording namelist arguments, and an error handler.

Namelist

This namelist is read from the file input.nml. Namelists start with an ampersand '&' and terminate with a slash '/'. Character strings that contain a '/' must be enclosed in quotes to prevent them from prematurely terminating the namelist.

&utilities_nml
   TERMLEVEL      = 2,
   logfilename    = 'dart_log.out',
   nmlfilename    = 'dart_log.nml',
   module_details = .true.,
   print_debug    = .false.,
   write_nml      = 'file'
/

The namelist controls how the logging, namelist, messages, and general utility routines behave.

Item	Type	Description
TERMLEVEL	integer	Level at which calls to error manager terminate program. The default setting is warnings and errors terminate the program. Setting this to 2 (E_ERR) means only errors terminate. Setting this to 3 means even errors do not cause an exit (which is not a good idea).
logfilename	character(len=256)	File to which the log messages are written.
nmlfilename	character(len=256)	File to which the namelist output is written. Can be the same name as the logfile.
module_details	logical	Each source code module can write out the repository version number and filename to the logfile. Verbose, but useful for knowing what version of the code was used during the run.
print_debug	logical	Setting this to .true. causes additional debug messages to print. These can be very verbose and by default are turned off.
write_nml	character(len=32)	String which controls where to write the namelist values that are being used for this execution. Valid values are: 'none', 'file', 'terminal', 'both'. 'none' turns off this write. 'file' writes a copy only to the `nmlfilename`. Writes are always in append mode, so the most recent information will be at the end of an existing file. 'terminal' will write to the job's standard output. 'both' will write both to the nml file and the standard output unit.

Other modules used

types_mod
netCDF

Public interfaces

use utilities, only :	file_exist
	get_unit
	open_file
	close_file
	timestamp
	register_module
	error_handler
	to_upper
	nc_check
	logfileunit
	nmlfileunit
	initialize_utilities
	finalize_utilities
	dump_unit_attributes
	find_namelist_in_file
	check_namelist_read
	find_textfile_dims
	file_to_text
	is_longitude_between
	get_next_filename
	set_filename_list
	set_tasknum
	set_output
	do_output
	E_DBG, DEBUG
	E_MSG, MESSAGE
	E_WARN, WARNING
	E_ERR, FATAL

A note about documentation style. Optional arguments are enclosed in brackets [like this].

var = file_exist(file_name) :

logical                      :: file_exist
character(len=*), intent(in) :: file_name

Returns true if file_name exists in the working directory, else false.

`var`	True if file_name exists in working directory.
`file_name`	Name of file to look for.

var = get_unit() :

integer :: get_unit

Returns an unused unit number for IO.

var An unused unit number.

var = open_file(fname [, form, action]) :

integer                                :: open_file
character(len=*), intent(in)           :: fname
character(len=*), optional, intent(in) :: form
character(len=*), optional, intent(in) :: action

Returns a unit number that is opened to the file fname. If form is not present or if form is "formatted" or "FORMATTED", file is opened for formatted IO. Otherwise, it is unformatted. The action string is the standard action string for Fortran IO (see F90 language description).

`var`	Unit number opened to file fname.
`fname`	Name of file to be opened.
form	Format: 'formatted' or 'FORMATTED' give formatted, anything else is unformatted. Default is formatted.
action	Standard fortran string description of requested file open action.

call timestamp([string1, string2, string3,] pos) :

character(len=*), optional, intent(in) :: string1
character(len=*), optional, intent(in) :: string2
character(len=*), optional, intent(in) :: string3
character(len=*), intent(in)           :: pos

Prints the message 'Time is YYYY MM DD HH MM SS' to the logfile along with three optional message strings. If the pos argument is 'end', the message printed is 'Finished... at YYYY MM DD HH MM SS' and the logfile is closed.

string1	An optional message to be printed.
string2	An optional message to be printed.
string3	An optional message to be printed.
`pos`	If 'end' terminates log_file output.

call close_file(iunit) :

integer, intent(in) :: iunit

Closes the given unit number. If the unit is not open, nothing happens.

iunit File unit to be closed.

call register_module(src, rev, rdate) :

character(len=*), intent(in) :: src
character(len=*), optional, intent(in) :: rev
character(len=*), optional, intent(in) :: rdate

Writes the source name to both the logfileunit and to standard out. The rev and revdate are deprecated as they are unsupported by git.

`src`	source file name.
`rev`	ignored
`rdate`	ignored

call error_handler(level, routine, text, src, rev, rdate [, aut, text2, text3]) :

integer, intent(in)                    :: level
character(len=*), intent(in)           :: routine
character(len=*), intent(in)           :: text
character(len=*), intent(in)           :: src
character(len=*), intent(in)           :: rev
character(len=*), intent(in)           :: rdate
character(len=*), optional, intent(in) :: aut
character(len=*), optional, intent(in) :: text2
character(len=*), optional, intent(in) :: text3

Prints an error message to standard out and to the logfileunit. The message contains the routine name, an error message, the source file, revision and revision date, and optionally the author. The level of severity is message, debug, warning, or error. If the level is greater than or equal to the TERMLEVEL (set in the namelist), execution is terminated. The default TERMLEVEL only stops for ERRORS.

`level`	Error severity (message, debug, warning, error). See below for specific ations.
`routine`	Name of routine generating error.
`text`	Error message.
`src`	Source file containing routine generating message.
`rev`	Revision number of source file.
`rdate`	Revision date of source file.
aut	Author of routine.
text2	If specified, the second line of text for the error message.
text3	If specified, the third line of text for the error message.

call find_namelist_in_file(namelist_file_name, nml_name, iunit, [,write_to_logfile_in]) :

character(len=*),  intent(in)          :: namelist_file_name
character(len=*),  intent(in)          :: nml_name
integer,           intent(out)         :: iunit
logical, optional, intent(in)          :: write_to_logfile_in

Opens the file namelist_file_name if it exists on unit iunit. A fatal error occurs if the file does not exist (DART requires an input.nml to be available, even if it contains no values). Searches through the file for a line containing ONLY the string &nml_name (for instance &filter_nml if nml_name is "filter_nml"). If this line is found, the file is rewound and the routine returns. Otherwise, a fatal error message is issued.

`namelist`	Name of file assumed to hold the namelist.
`nml_name`	Name of the namelist to be searched for in the file, for instance, filter_nml.
`iunit`	Channel number on which file is opened.
write_to_logfile_in	When the namelist for the utilities module is read, the logfile has not yet been open because its name is in the namelist. If errors are found, have to write to standard out. So, when utilities module calls this internally, this optional argument is set to false. For all other applications, it is normally not used (default is false).

call check_namelist_read(iunit, iostat_in, nml_name, [, write_to_logfile_in]) :

integer, intent(in)                    :: iunit
integer, intent(in)                    :: iostat_in
character(len=*), intent(in)           :: nml_name
logical, optional, intent(in)          :: write_to_logfile_in

Once a namelist has been read from an opened namelist file, this routine checks for possible errors in the read. If the namelist read was successful, the file opened on iunit is closed and the routine returns. If iostat is not zero, an attempt is made to rewind the file on iunit and read the last line that was successfully read. If this can be done, this last line is printed with the preamble "INVALID NAMELIST ENTRY". If the attempt to read the line after rewinding fails, it is assumed that the original read (before the call to this subroutine) failed by reaching the end of the file. An error message stating that the namelist started but was never terminated is issued.

`iunit`	Channel number on which file is opened.
`iostat_in`	Error status return from an attempted read of a namelist from this file.
`nml_name`	The name of the namelist that is being read (for instance filter_nml).
write_to_logfile_in	When the namelist for the utilities module is read, the logfile has not yet been open because its name is in the namelist. If errors are found, have to write to standard out. So, when utilities module calls this internally, this optional argument is set to false. For all other applications, it is normally not used (default is false).

call find_textfile_dims (fname, nlines, linelen) :

character(len=*), intent (IN)  :: fname
integer,          intent (OUT) :: nlines
integer,          intent (OUT) :: linelen

Determines the number of lines and maximum line length of an ASCII text file.

`fname`	input, character string file name
`nlines`	output, number of lines in the file
`linelen`	output, length of longest line in the file

call file_to_text (fname, textblock) :

character(len=*),               intent (IN)  :: fname
character(len=*), dimension(:), intent (OUT) :: textblock

Opens the given filename and reads ASCII text lines into a character array.

`fname`	input, character string file name
`textblock`	output, character array of text in the file

var = is_longitude_between(lon, minlon, maxlon [, doradians]) :

real(r8), intent(in)           :: lon
real(r8), intent(in)           :: minlon
real(r8), intent(in)           :: maxlon
logical,  intent(in), optional :: doradians
logical                        :: is_longitude_between

Uniform way to test longitude ranges, in degrees, on a globe. Returns true if lon is between min and max, starting at min and going EAST until reaching max. Wraps across 0 longitude. If min equals max, all points are inside. Includes endpoints. If optional arg doradians is true, do computation in radians between 0 and 2*PI instead of default 360. There is no rejection of input values based on range; they are all converted to a known range by calling modulo() first.

`var`	True if lon is between min and max.
`lon`	Location to test.
`minlon`	Minimum longitude. Region will start here and go east.
`maxlon`	Maximum longitude. Region will end here.
doradians	Optional argument. Default computations are in degrees. If this argument is specified and is .true., do the computation in radians, and wrap across the globe at 2 * PI. All inputs must then be specified in radians.

var = get_next_filename( listname, lineindex ) :

character(len=*),  intent(in) :: listname
integer,           intent(in) :: lineindex
character(len=128)            :: get_next_filename

Returns the specified line of a text file, given a filename and a line number. It returns an empty string when the line number is larger than the number of lines in a file.

Intended as an easy way to process a list of files. Use a command like 'ls > out' to create a file containing the list, in order, of files to be processed. Then call this function with an increasing index number until the return value is empty.

`var`	An ascii string, up to 128 characters long, containing the contents of line `lineindex` of the input file.
`listname`	The filename to open and read lines from.
`lineindex`	Integer line number, starting at 1. If larger than the number of lines in the file, the empty string '' will be returned.

var = set_filename_list( name_array, listname, caller_name ) :

character(len=*),  intent(inout) :: name_array
character(len=*),  intent(in)    :: listname
character(len=*),  intent(in)    :: caller_name
integer                          :: var

Returns the count of filenames specified. Verifies that one of either the name_array or the listname was specified but not both. If the input was a listname copy the names into the name_array so when this routine returns all the filenames are in name_array(). Verifies that no more than the allowed number of names was specified if the input was a listname file.

`var`	The count of input files specified.
`name_array`	Array of input filename strings. Either this item or the listname must be specified, but not both.
`listname`	The filename to open and read filenames from, one per line. Either this item or the name_array must be specified but not both.
`caller_name`	Calling subroutine name, used for error messages.

call to_upper(string) :

character(len=*), intent (INOUT) :: string

Converts the character string to UPPERCASE - in place. The input string is modified.

string any character string

call nc_check(istatus, subr_name [, context]) :

integer, intent(in)                    :: istatus
character(len=*), intent(in)           :: subr_name
character(len=*), optional, intent(in) :: context

Check the return code from a netcdf call. If no error, return without taking any action. If an error is indicated (in the istatus argument) then call the error handler with the subroutine name and any additional context information (e.g. which file or which variable was being processed at the time of the error). All errors are currently hardcoded to be FATAL and this routine will not return.

This routine calls a netCDF library routine to construct the text error message corresponding to the error code in the first argument. An example use of this routine is: :

call nc_check(nf90_create(path = trim(ncFileID%fname), cmode = nf90_share, ncid = ncFileID%ncid), &
             'init_diag_output', 'create '//trim(ncFileID%fname))

`istatus`	The return value from any netCDF call.
`subr_name`	String name of the current subroutine, used in case of error.
context	Additional text to be used in the error message, for example to indicate which file or which variable is being processed.

call set_tasknum(tasknum) :

integer, intent(in)               :: tasknum

Intended to be used in the MPI multi-task case. Sets the local task number, which is then prepended to subsequent messages.

tasknum Task number returned from MPI_Comm_Rank(). MPI task numbers are 0 based, so for a 4-task job these numbers are 0-3.

call set_output(doflag) :

logical, intent(in)               :: doflag

Set the status of output. Can be set on a per-task basis if you are running with multiple tasks. If set to false only warnings and fatal errors will write to the log. The default in the multi-task case is controlled by the MPI module initialization code, which sets task 0 to .TRUE. and all other tasks to .FALSE.

doflag Sets, on a per-task basis, whether messages are to be written to the logfile or standard output. Warnings and errors are always output.

var = do_output() :

logical                      :: do_output

Returns true if this task should write to the log, false otherwise. Set by the set_output() routine. Defaults to true for the single task case. Can be used in code like so:

if (do_output()) then
 write(*,*) 'At this point in the code'
endif

var True if this task should write output.

call initialize_utilities( [progname] [, alternatename] ) :

character(len=*), intent(in), optional :: progname
character(len=*), intent(in), optional :: alternatename

Reads the namelist and opens the logfile. Records the values of the namelist and registers this module.

progname	If given, use in the timestamp message in the log file to say which program is being started.
alternatename	If given, log filename to use instead of the value in the namelist. This permits, for example, different programs sharing the same input.nml file to have different logs. If not given here and no value is specified in the namelist, this defaults to dart_log.out

call finalize_utilities()

Closes the logfile; using utilities after this call is a bad idea.

call dump_unit_attributes(iunit) :

integer, intent(in) :: iunit

Writes all information about the status of the IO unit to the error handler with error level message.

iunit Unit about which information is requested.

integer :: E_DBG, DEBUG
integer :: E_MSG, MESSAGE
integer :: E_WARN, WARNING
integer :: E_ERR, FATAL

Severity levels to be passed to error handler. Levels are debug, message, warning and fatal. The namelist parameter TERMLEVEL can be used to control at which level program termination should occur.

integer :: logfileunit

logfileunit Unit opened to file for diagnostic output.

integer :: nmlfileunit

nmlfileunit Unit opened to file for diagnostic output of namelist files. Defaults to same as logfileunit. Provides the flexibility to log namelists to a separate file, reducing the clutter in the log files and perhaps increasing readability.

Files

assim_model_mod.nml in input.nml
logfile, name specified in namelist

References

none

Error codes and conditions

Routine	Message	Comment
get_unit	No available units	Unable to open enough IO channels
check_nml_error	while reading namelist _____	Fatal error reading namelist. This could be caused by having an entry in the namelist input file that is not in the namelist, by having illegal values for namelist variables, or by a variety of other compiler dependent problems.
find_namelist_in_file	Namelist entry &____ must exist in namelist_nml.	There must be an entry for the required namelist, for instance &filter_nml, in the input.nml namelist file. Even if no values are to be changed from the default, an entry like &filter_nml followed by a line containing only / is required.
find_namelist_in_file	Namelist input file: input.nml must exist	The namelist input file (usually input.nml) must exist.
check_namelist_read	INVALID NAMELIST ENTRY: ___ in namelist ____	While reading the namelist, either a bad entry was found or an end of file was encountered. The most confusing case is when a namelist is being read successfully but is not appropriately terminated with a /. The line printed out by the error message will be the start of the next namelist in the input.nml file in this case.

Private components

N/A

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

utilities_mod.rst

utilities_mod.rst

MODULE utilities_mod

Overview

Namelist

Other modules used

Public interfaces

Files

References

Error codes and conditions

Private components

Files

utilities_mod.rst

Latest commit

History

utilities_mod.rst

File metadata and controls

MODULE utilities_mod

Overview

Namelist

Other modules used

Public interfaces

Files

References

Error codes and conditions

Private components