Re configuring the Jetson TX2 Kernel
Ishan Mitra edited this page Jul 24, 2017
·
3 revisions
If you are using the USB2AX, you will need to reconfigure the Linux kernel to enable USB Modem Support. We followed this simple tutorial from JetsonHacks to reconfigure the kernel. IMPORTANT: before executing ./makeKernel.h execute the command below.
sudo sed -i 's/.*CONFIG_USB_ACM.*/CONFIG_USB_ACM=y/' /usr/src/kernel/kernel-4.4/.config
After following the tutorial and rebooting the Jetson plug in the USB2AX and type:
dmesg | grep acm
You should receive an output like this
nvidia@tegra-ubuntu:~ $ dmesg | grep acm
[ 38.506490] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 38.506689] usbcore: registered new interface driver cdc_acm
[ 38.506690] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters