permalink | sidebar | keywords | summary |
---|---|---|---|
commands-a-z/create-snmpuser-username.html |
sidebar |
register, snmpv3 usm, user |
The create snmpUser userName command creates a new Simple Network Management Protocol (SNMP) user and registers the new user as a known entity to the SNMP agent. Any attempt to register a new user with the same name and engine ID as that of an existing user is rejected. |
The create snmpUser userName
command creates a new Simple Network Management Protocol (SNMP) user and registers the new user as a known entity to the SNMP agent. Any attempt to register a new user with the same name and engine ID as that of an existing user is rejected.
This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.
To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.
create snmpUser userName="snmpUserName" [engineId=(local | engineId)] [authProtocol=(none | sha | sha256 | sha512) authPassword="authPassword"] [privProtocol=(none | aes128) privPassword="privPassword"]
Parameter | Description |
---|---|
|
The name of the SNMP USM user that you want to create. Enclose the SNMP USM user name in double quotation marks (" ") |
|
The identifier of the authoritative SNMP engine ID for the user. The value may be " |
|
The authentication protocol (HMAC) to be used for the user. The value may be one of the following:
|
|
The password to be used for authentication for the user. Must be specified if the authentication protocol is " |
|
The privacy protocol (encryption) to be used for the user. The value may be one of the following:
|
|
The password to be used for privacy/encryption for the user. Must be specified if the privacy protocol is " |