Skip to content

Latest commit

 

History

History
54 lines (39 loc) · 1.5 KB

set-hostchannel.adoc

File metadata and controls

54 lines (39 loc) · 1.5 KB
Raw
permalink sidebar keywords summary
commands-a-z/set-hostchannel.html
sidebar
set, host, channel
The set hostChannel command defines the loop ID for the host channel.

Set host channel

The set hostChannel command defines the loop ID for the host channel.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Syntax

set hostChannel [hostChannelNumber]
preferredID=portID

Parameters

Parameter Description

hostChannel

The identifier number of the host channel for which you want to set the loop ID. Enclose the host channel identifier number in square brackets ([ ]).

Use a host channel value that is appropriate for your particular controller model. A controller tray might support one host channel or as many as eight host channels. Valid host channel values are a1, a2, a3, a4, a5, a6, a7, a8, b1, b2, b3, b4, b5, b6, b7, or b8.

preferredID

The port identifier for the specified host channel. Port ID values are 0 to 127.

Minimum firmware level

6.10

6.14 adds an update to the host channel identifier.

7.15 adds an update to the host channel identifier.