permalink | sidebar | keywords | summary |
---|---|---|---|
commands-a-z/set-storagearray-icmppingresponse.html |
sidebar |
set, storage, array, icmp, response |
The set storageArray icmpPingResponse command returns the default values for negotiable settings for sessions and connections, which represent the starting point for the storage array for negotiations. |
The set storageArray icmpPingResponse
command returns the default values for negotiable settings for sessions and connections, which represent the starting point for the storage array for negotiations.
This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.
To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.
Parameter | Description |
---|---|
|
This parameter turns on or turns off Echo Request messages. Set the parameter to |
The Internet Control Message Protocol (ICMP) is used by operating systems in a network to send error messages, test packets, and informational messages related to the IP, such as a requested service is not available or that a host or router could not be reached. The ICMP response command sends ICMP Echo Request messages and receives ICMP Echo Response messages to determine if a host is reachable and the time it takes for packets to get to and from that host.