Skip to content

Latest commit

 

History

History
20 lines (16 loc) · 1001 Bytes

iscsi-configure-switches-concept.adoc

File metadata and controls

20 lines (16 loc) · 1001 Bytes
Raw
permalink sidebar keywords summary
config-linux/iscsi-configure-switches-concept.html
sidebar
Switches, zoning, express linux configuration, software configuration, linux host, E2800, E5700, EF300, EF600, E-Series, eseries
Configure the switches according to the vendor’s recommendations for iSCSI.

Configure the switches

You configure the switches according to the vendor’s recommendations for iSCSI. These recommendations might include both configuration directives as well as code updates.

You must ensure the following:

  • You have two separate networks for high availability. Make sure that you isolate your iSCSI traffic to separate network segments.

  • You must enable flow control end to end.

  • If appropriate, you have enabled jumbo frames.

Note
 Port channels/LACP is not supported on the controller’s switch ports. Host-side LACP is not recommended; multipathing provides the same benefits, and in some cases, better benefits.