Skip to content

Latest commit

 

History

History
43 lines (31 loc) · 1.72 KB

index.adoc

File metadata and controls

43 lines (31 loc) · 1.72 KB
Raw
permalink sidebar keywords summary
snmp-config/index.html
sidebar
content, configure, snmp, cluster, management, level, add, communities, community, security, user, traphost, communication, snmp configuration overview
Using the ONTAP System Manager 'classic' interface with ONTAP 9.7 or earlier, you can configure SNMP at the cluster management level; add communities, security users, and traphosts; and test the SNMP communication.

SNMP configuration overview

Using the ONTAP System Manager classic interface with ONTAP 9.7 or earlier, you can configure SNMP at the cluster management level; add communities, security users, and traphosts; and test the SNMP communication.

You should use these procedures if you want to configure SNMP access to a cluster in the following way:

  • You are working with clusters running ONTAP 9.

  • You want to use best practices, not explore every available option.

    Note

    There are a few steps in these procedures for which you must use the command-line interface.

Other ways to do this in ONTAP

You can configure SNMP access to a cluster using for all ONTAP 9 versions. You should use the appropriate procedure for your version of ONTAP.

To perform these tasks with…​

Refer to…​

The redesigned System Manager (available with ONTAP 9.7 and later)

The ONTAP command-line interface (CLI)