sidebar | permalink | keywords | summary |
---|---|---|---|
sidebar |
upgrade-arl-auto-affa900/overview_of_the_arl_upgrade.html |
overview, arl, upgrade, owner, controller, hardware, old, system, chassis, disk, disks |
Understand how the ARL procedure to upgrade controller models in the same chassis works. |
Stage | Steps |
---|---|
During Stage 1, you verify that you have the correct hardware for your upgrade, run prechecks, and, if required, correct aggregate ownership. You must record certain information if you are managing Storage Encryption by using the Onboard Key Manager and you can choose to quiesce the SnapMirror relationships. Aggregate ownership at the end of Stage 1:
|
|
During Stage 2, you relocate node1 non-root aggregates and NAS data LIFs from node1 to node2. This process is largely automated; the operation pauses to enable you to check its status. You must manually resume the operation. If required, you relocate failed or vetoed aggregates. You record node1 information for use later in the procedure before retiring node1. You can also prepare to netboot node1 later in the procedure. Aggregate ownership at the end of Stage 2:
|
|
During Stage 3, you boot node1 with upgraded system modules and verify the upgraded node1 installation. If you are using NetApp Volume Encryption (NVE), you restore key-manager configuration. You also relocate node1 non-root aggregates and NAS data LIFs from node2 to the upgraded node1 and verify that the SAN LIFs exist on node1. Aggregate ownership at the end of Stage 3:
|
|
During Stage 4, you relocate non-root aggregates and NAS data LIFs from node2 to the upgraded node1 and retire node2. Aggregate ownership at the end of Stage 4:
|
|
During Stage 5, you install the new system modules that you received for the upgraded node2 and then netboot node2. Aggregate ownership at the end of Stage 5:
|
|
During Stage 6, you boot node2 with upgraded system modules and verify the upgraded node2 installation. If you are using NVE, you restore key-manager configuration. You also relocate node1 non-root aggregates and NAS data LIFs from node1 to the upgraded node2 and verify that the SAN LIFs exist on node2. |
|
During Stage 7, you confirm that the new nodes are set up correctly and, if the new nodes are encryption-enabled, you configure and set up Storage Encryption or NVE. You should also decommission the old nodes and resume the SnapMirror operations. |