stage_5_index.adoc

sidebar	permalink	keywords	summary
sidebar	upgrade-arl-auto-app/stage_5_index.html	install, boot, node4, node2, node-management, stage 5	Stage 5 process sequence for an ARL upgrade using `system controller replace` commands on controllers running ONTAP 9.8 or later.

Overview

During Stage 5, you install and boot node4, check that the cluster and node-management ports from node2 come online on node4, and verify the node4 installation. If you are using NVE, you restore key-manager configuration. If required, you set the FC or UTA/UTA2 configuration on node4. You also relocate node2 NAS data LIFs and non-root aggregates from node3 to node4 and verify that the SAN LIFs exist on node4.

Steps

1. Install and boot node4

2. Set the FC or UTA/UTA2 configuration on node4

3. Verify the node4 installation

4. Restore key-manager configuration on node4

5. Move non-root aggregates and NAS data LIFs owned by node2 from node3 to node4