stage_3_index.adoc

sidebar	permalink	keywords	summary
sidebar	upgrade-arl-auto/stage_3_index.html	stage 3, install node3, non-SAN data LIFs, non-root aggregates	Stage 3 process sequence for an ARL upgrade using `system controller replace` commands on controllers running ONTAP 9.5 to 9.7.

Stage 3 overview

During Stage 3, you install and boot node3, map the cluster and node-management ports from node1 to node3, and verify the node3 installation. If required, you set the FC or UTA/UTA2 configuration on node3 and confirm that node3 has joined quorum. You also relocate the node1 NAS data LIFs and non-root aggregates from node2 to node3 and verify that the SAN LIFs exist on node3.

Steps

1. Install and boot node3

2. Set the FC or UTA/UTA2 configuration on node3

3. Map ports from node1 to node3

4. Joining the quorum when a node has a different set of network ports

5. Verify the node3 installation

6. Move non-root aggregates and NAS data LIFs owned by node1 from node2 to node3