stage_5_index.adoc

sidebar	permalink	keywords	summary
sidebar	upgrade-arl-auto/stage_5_index.html	install, boot, node4, node2, node-management, stage 5	Stage 5 process sequence for an ARL upgrade using `system controller replace` commands on controllers running ONTAP 9.5 to 9.7.

Stage 5 overview

During Stage 5, you install and boot node4, map the cluster and node-management ports from node2 to node4, and verify the node4 installation. If required, you set the FC or UTA/UTA2 configuration on node4 and confirm that node4 has joined quorum. You also relocate node2 NAS data LIFs and non-root aggregates from node3 to node4 and verify the SAN LIFs exist on node4.

Steps

1. Install and boot node4

2. Set the FC or UTA/UTA2 configuration on node4

3. Map ports from node2 to node4

4. Join the quorum when a node has a different set of network ports

5. Verify the node4 installation

6. Move non-root aggregates and NAS data LIFs owned by node2 from node3 to node4