chassis-replace-complete-system-restore-rma.adoc

permalink	sidebar	keywords	summary
a200/chassis-replace-complete-system-restore-rma.html	sidebar	aff a200, verify and set HA state, complete the replacement process	You must verify the HA state of the chassis and return the failed part to NetApp, as described in the RMA instructions shipped with the kit.

Restore and verify the configuration - AFF A200

Step 1: Verify and set the HA state of the chassis

You must verify the HA state of the chassis, and, if necessary, update the state to match your system configuration.

Steps

1. In Maintenance mode, from either controller module, display the HA state of the local controller module and chassis: ha-config show

   The HA state should be the same for all components.

2. If the displayed system state for the chassis does not match your system configuration:

   1. Set the HA state for the chassis: ha-config modify chassis HA-state

      The value for HA-state can be one of the following:

      • ha

      • non-ha

   2. Confirm that the setting has changed: ha-config show

3. If you have not already done so, recable the rest of your system.

Step 2: Return the failed part to NetApp

../_include/complete_rma.adoc