replacing-fan-in-sgf6112.adoc

permalink	sidebar	keywords	summary
sg6100/replacing-fan-in-sgf6112.html	sidebar	storagegrid, sgf6112, sg6100-cn, sg6160, storage appliance, Replacing, replace, fan, remove, removing, removal, install, installing	The SGF6112 appliance and SG6100-CN controller have eight cooling fans. If one of the fans fails, you must replace it as soon as possible to ensure that the appliance has proper cooling.

Replace fan in an SGF6112 or SG6100-CN (SG6160)

The SGF6112 appliance and SG6100-CN controller have eight cooling fans. If one of the fans fails, you must replace it as soon as possible to ensure that the appliance has proper cooling.

Before you begin

• You have the correct replacement fan.

• You have determined the location of the fan to replace.

• You have physically located the SGF6112 appliance or SG6100-CN controller where you are replacing the fan in the data center.

  Note	A controlled shutdown of the appliance is required before removing the appliance from the rack.

• You have disconnected all cables and removed the appliance cover.

• You have confirmed that the other fans are installed and running.

../_include/2023-replace-fan.adoc

After you finish

1. Put the top cover back on the appliance, and press the latch down to secure the cover in place.

2. Power on the appliance and monitor the appliance LEDs and boot-up codes.

   Use the BMC interface to monitor boot-up status.

3. Confirm that the appliance node appears in the Grid Manager and that no alerts appear.

../_include/fru-statement.adoc