Skip to content

Latest commit

 

History

History
19 lines (12 loc) · 1.31 KB

imei-change.rst

File metadata and controls

19 lines (12 loc) · 1.31 KB
Raw

Changing IMEI

To be able to change the IMEI of your device, the software blue merle is pre-installed.

Note

After performing a factory reset, you need to reinstall blue-merle.

local

There a different ways to change the IMEI. The simplest is to use the toogle on the side of the NW750:

  1. Switch the hardware toggle.
  2. Follow the instructions on the display, which will prompt you to replace the SIM card eventually.
  3. After replacing the SIM card, flip the toggle again. This changes the IMEI and powers off your device.
  4. You should change your geographical location before booting again.

For more details see this documentation.

Note

Occasionally, commands executed on the device may take longer than expected. This can result in the display switching off (standby) for a few seconds before displaying the expected final message (e.g. instructions to replace the SIM card). Wait for the final message to appear before pulling the switch again. If no message is displayed after a minute, the script might have exited or you might have missed the message. In this case, pull the switch to continue / restart the process.