rtorrent.rc.template

#
#
# The Seedbox From Scratch Script
#   By Notos ---> https://github.com/Notos/
#
#
######################################################################
#
#  Copyright (c) 2013 Notos (https://github.com/Notos/)
#
#  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
#
#  The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
#
#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
#  --> Licensed under the MIT license: http://www.opensource.org/licenses/mit-license.php
#
######################################################################
#
#
#
# this is an example resource file for rtorrent
# copy to /home/$NEWUSER1/.rtorrent.rc and enable/modify the options as needed
# remember to uncomment the options you wish to enable
#
# based on original .rtorrent.rc file from The libTorrent and rTorrent Project
# this assumes the following directory structure:
#
# /torrents/downloading - temporary location for torrents while downloading (see "directory")
# /torrents/complete - torrents are moved here when complete (see "on_finished")
# /torrents/torrentfiles/auto - the "autoload" directory for rtorrent to use
# rtorrent will automatically load .torrents placed here. (see "schedule = watch_directory")
# /torrents/downloading/rtorrent.session - for storing rtorrent session information
#

 
# Downloads Settings 
# 
# maximum number of simultaneous uploads per torrent 
# throttle.max_uploads.set = 30
max_uploads = 30 
 
# maximum and minimum number of peers to connect to per torrent 
# throttle.min_peers.normal.set = 40 
# throttle.max_peers.normal.set = 100 
min_peers = 40 
max_peers = 100 
 
# same as above but for seeding completed torrents (-1 = same as downloading) 
# throttle.min_peers.seed.set = 25
# throttle.max_peers.seed.set = 60 
min_peers_seed = 25 
max_peers_seed = 60 
 
# tracker_numwant = -1
trackers.numwant.set = -1
 
# check hash for finished torrents. might be useful until the bug is 
# fixed that causes lack of diskspace not to be properly reported 
# pieces.hash.on_completion.set = yes 
check_hash = yes 

# default directory to save the downloaded torrents
# directory.default.set = /home/<username>/downloads
directory = /home/<username>/downloads/manual
 
# default session directory. make sure you don"t run multiple instances 
# of rtorrent using the same session directory 
# perhaps using a relative path? 
# session.path.set = /home/<username>/downloads/.session
session = /home/<username>/downloads/.session
 
 
# Connection Settings 
# 
# port range to use for listening 
# network.port_range.set = 99888-99888 
port_range = 99888-99888 
 
# start opening ports at a random position within the port range 
# network.port_random.set = yes 
port_random = yes

# global upload and download rate in KiB. "0" for unlimited
# throttle.global_up.max_rate.set_kb = 0 
# throttle.global_down.max_rate.set_kb = 0 
upload_rate = 0 
download_rate = 0 
 
# max mapped memory 
# nb does not refer to physical memory 
# max_memory_usage = 3500M 
pieces.memory.max.set = 3500M 
 
# max number of files to keep open simultaneously 
# max_open_files = 192 
network.max_open_files.set = 192 
 
# max_open_http = 32 
network.http.max_open.set = 32
 
 
# BitTorrent Settings 
# 
# enable DHT support for trackerless torrents or when all trackers are down 
# may be set to "disable" (completely disable DHT), "off" (do not start DHT), 
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately) 
# the default is "off". for DHT to work, a session directory must be defined 
# 
# dht.mode.set = disable
dht = disable 
 
# UDP port to use for DHT. 
# 
# dht_port = 6881 
# dht.port.set = 6881 
 
# enable peer exchange (for torrents not marked private) 
# protocol.pex.set = no 
peer_exchange = no 
 
# the IP address reported to the tracker 
# network.local_address.set = rakshasa.no 
# network.local_address.set = 127.0.0.1 
# ip = rakshasa.no 
# ip = 127.0.0.1 
 
# schedule syntax: id,start,interval,command 
# call cmd every interval seconds, starting from start. an interval of zero calls the task once 
# while a start of zero calls it immediately. start and interval may optionally use a time format 
# dd:hh:mm:ss e.g. to start a task every day at 18:00, use 18:00:00,24:00:00. 
# commands: stop_untied =, close_untied =, remove_untied = 
# stop, close or remove the torrents that are tied to filenames that have been deleted 
 
# watch a directory for new torrents, and stop those that have been deleted
schedule = watch_directory,5,5,load_start=/home/<username>/downloads/watch/*.torrent
schedule = untied_directory,5,5,stop_untied= 
 
# close torrents when diskspace is low. */ 
schedule = low_diskspace,5,60,close_low_diskspace=100M 
 
# stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0 
# schedule = ratio,60,60,stop_on_ratio=200,200M,2000 
 
# load = file, load_verbose = file, load_start = file, load_start_verbose = file 
# load and possibly start a file, or possibly multiple files by using the wild-card "*" 
# this is meant for use with schedule, though ensure that the start is non-zero 
# the loaded file will be tied to the filename provided. 
 
# when the torrent finishes, it executes "mv -n <base_path> /home/$NEWUSER1/Download/" 
# and then sets the destination directory to "/home/$NEWUSER1/Download/". (0.7.7+)
# on_finished = move_complete,"execute=mv,-u,$d.get_base_path=,/home/<username>/downloads/complete/ ;d.set_directory=/home/<username>/downloads/complete/"
 
# network.scgi.open_port = 127.0.0.1:5995 
scgi_port = 127.0.0.1:5995 
 
# alternative calls to bind and IP that should handle dynamic IP"s
# schedule = ip_tick,0,1800,ip=rakshasa 
# schedule = bind_tick,0,1800,bind=rakshasa 
 
# encryption options, set to none (default) or any combination of the following: 
# allow_incoming, try_outgoing,require,require_RC4,enable_retry,pref er_plaintext 
# 
# the example value allows incoming encrypted connections, starts unencrypted 
# outgoing connections but retries with encryption if they fail, preferring 
# plaintext to RC4 encryption after the encrypted handshake 
#
# protocol.encryption.set = 
encryption = allow_incoming,enable_retry,prefer_plaintext 
 
 
# Advanced Settings 
# 
# do not modify the following parameters unless you know what you"re doing 
# 
 
# example of scheduling commands: Switch between two ip"s every 5 seconds 
# schedule = "ip_tick1,5,10,ip=torretta" 
# schedule = "ip_tick2,10,10,ip=lampedusa" 
 
# remove a scheduled event 
# schedule_remove = "ip_tick1" 
 
# hash read-ahead controls how many MB to request the kernel to read ahead ahead 
# if the value is too low the disk may not be fully utilized, 
# while if too high the kernel might not be able to keep the read pages 
# in memory thus end up trashing. 
# hash_read_ahead = 8
# system.hash.read_ahead.set = 8 
 
# interval between attempts to check the hash, in milliseconds 
# hash_interval = 50 
# system.hash.interval.set = 50 
 
# number of attempts to check the hash while using the mincore status, before forcing 
# overworked systems might need lower values to get a decent hash checking rate 
# hash_max_tries = 3 
# system.hash.max_tries.set = 3 

# SSL certificate name
# http_cacert =
# SSL certificate path 
# http_capath = 
 
# throttle.max_downloads.div.set = 
# max_downloads_div =
 
# throttle.max_uploads.div.set = 
# max_uploads_div = 
 
system.file.max_size.set = -1 
 
# preload type 0 = Off, 1 = madvise, 2 = direct paging 
pieces.preload.type.set = 1 
pieces.preload.min_size.set = 262144
pieces.preload.min_rate.set = 5120
network.send_buffer.size.set = 1M
network.receive_buffer.size.set = 131072

pieces.sync.always_safe.set = no
pieces.sync.timeout.set = 600
pieces.sync.timeout_safe.set = 900

# scgi_dont_route =
# network.scgi.dont_route.set =

# session.path.set =
session.name.set =
session.use_lock.set = yes
session.on_completion.set = yes

system.file.split_size.set = -1
system.file.split_suffix.set = .part

# set whether the client should try to connect to UDP trackers
# use_udp_trackers = yes
trackers.use_udp.set = yes
use_udp_trackers = yes

# use a http proxy. [url] ;an empty string disables this setting
# http_proxy =
# network.http.proxy_address.set =

# The IP address the listening socket and outgoing connections is bound to
# network.bind_address.set = rakshasa.no
# network.bind_address.set = 127.0.0.1
# bind = rakshasa.no
# bind = 127.0.0.1

# number of sockets to simultaneously keep open
# max_open_sockets = 65023
# network.max_open_sockets.set = 65023

# set the umask applied to all files created by rtorrent
# system.umask.set =

# alternate keyboard mappings
# qwerty | azerty | qwertz | dvorak
# key_layout = dvorak
# keys.layout.set = dvorak

################ If you need log, uncomment (remove ######) from all lines below
######
######log.open_file = "rtorrent", ~/log/rtorrent.log
######log.open_file = "tracker", ~/log/tracker.log
######log.open_file = "storage", ~/log/storage.log
######
######log.add_output = "info", "rtorrent"
######log.add_output = "critical", "rtorrent"
######log.add_output = "error", "rtorrent"
######log.add_output = "warn", "rtorrent"
######log.add_output = "notice", "rtorrent"
######log.add_output = "debug", "rtorrent"
######
######log.add_output = "dht_debug", "tracker"
######log.add_output = "tracker_debug", "tracker"
######
######log.add_output = "storage_debug", "storage"
######