.. currentmodule:: oggm
We list here some of the questions we get most often, either on our Slack workspace or on github.
There are plenty of established ice dynamics models, and some of them are open-source (e.g. PISM, Elmer/Ice, IGM).
The purpose of OGGM is to be an easy to use, fully automated global glacier model, i.e. applicable to any glacier in the world with or without specific tuning or tweaking. Therefore, it does not attempt to replace (and even less compete with) these established ice dynamics models: it can be seen as a "framework", a set of unified tools with eases the process of working with many mountain glaciers at once.
There is a standard modelling chain in OGGM (with a mass balance model and a flowline model) but there is no obligation to use all of these tools. For example, we can easily picture a workflow where people will use OGGM to create homogenized initial conditions (topography, climate) but use a higher order dynamical model like IGM instead of the simplified OGGM dynamics. For these kind of workflows, we created the OGGM-contrib example package which should help OGGM users to implement their own physics in OGGM.
The short answer is: "yes, but..."
The longer answer is that OGGM has been designed to work with all the world's glaciers and calibrated as well as we can, but with publicly available global datasets. We are quite confident that OGGM provides reasonable global estimates of glacier mass balance and glacier change: this is a result of the law of large numbers, assuming that the uncertainty for each single glacier can be large but random and Gaussian.
If you use OGGM for a single or a handful of glaciers, chances are that the outcome is disappointing. For these kind of applications, you'll probably need to re-calibrate OGGM using local data, for example of mass balance or observations of past glacier change.
It depends what you mean by "long-term": at centennial time scales, probably, yes. At millennial time scales, maybe. At glacial time scales, probably not. The major issue we have to face with OGGM is that it uses a "glacier-centric" approach: it can simulate the mountain glaciers and ice-caps we know from contemporary inventories, but it cannot simulate glaciers which existed before but have disappeared today.
Also, if glaciers grow into large ice complexes and ice caps, the flowline assumption becomes much less valid than for typical valley glaciers found today. For these situations, fully distributed models like IGM or PISM are more appropriate.
In addition, there is some issues about glacier growth: you have to be sure the limit border you have defined is large enough to allow a large growth of glaciers ; secondly, you need to authorize the merge of glaciers which is implemented into OGGM but not automated ; last, there might be not negligible changes in the landscape around the glacier as well as evolution of the glacier bed for long-term simulations.
We are currently in the process of testing and tuning OGGM for post-LIA simulations in the Alps. Reach out if you would like to know more about our progress.
Thanks for your interest in OGGM! Usually, we prefer to keep usage questions on github issues so that everybody can learn from all questions and their answers. You can also join our Slack discussion channel if you want a more interactive forum. Keep in touch with us per email if you'd like to join, we are a very open community!
Yes! There is a function to do exactly that: :py:func:`utils.write_centerlines_to_shape`. We also provide some already processed ones in :doc:`assets`.
Yes! Although it might make you have to write some code. The developers cannot think of all the great ideas/potential applications you have for the model. We also do a lot of work within the OGGM framework, i.e. most of the data we need is already there. Some variables are hidden, see e.g. here and there for discussions on github.
If you need some specific variables, please write on GitHub and we can discuss.
Out-of-the box, non-preprocessed OGGM will use fixed values for the creep parameter A and the sliding parameter f_s:
.. ipython:: python from oggm import cfg cfg.initialize() cfg.PARAMS['glen_a'] cfg.PARAMS['fs']
That is, A is set to the standard value for temperate ice as given in [Cuffey_Paterson_2010]_, and sliding is set to zero. While these values are reasonable, they are unlikely to be the ones yielding the best results at the global scale, and even more unlikely at regional or local scales. In particular, in the absence of sliding parameter, it is recommended to set A to a higher value to compensate for this missing process (effectively making ice "less stiff").
New in version 1.4!
Since v1.4, OGGM can now calibrate A based on the consensus from [Farinotti_etal_2019] on any number of glaciers. We recommend to use a large number of glaciers: OGGM's default glacier directories are calibrated at the RGI region level. This value is then also used by the forward dynamical model for consistency, according to the parameter use_inversion_params_for_run.
The pre-processed directories at level 3 to 5 are already calibrated to the consensus estimate at the RGI region level, i.e. unless specified otherwise, OGGM will use the pre-calibrated A value for these glaciers.
There is a way to calibrate A for the ice thickness inversion procedure based on observations of ice thickness (see this blog post about g2ti for an example). At the global scale, a value in the range of [1.1-1.5] times the default value gives volume estimates close to [Farinotti_etal_2019]. At regional scale, these values can differ, with a value closer to a factor 3, for example for the Alps. Note that this depends on other variables as well, such as our estimates of solid precipitation amounts (i.e mass turnover). This makes things complicated, as regions with overestimated solid precipitation can be compensated by a higher A, and the other way around.
Finally, note that a change in A has a very strong influence for values close to the default value, but this influence reduces to the power of 1/5 for large values of A (in other words, there is a big difference between values of 1 to 1.3 times the default A, but a comparatively small difference for values between 3 to 5 times the default A). This is best shown by this figure from [Maussion_etal_2019]:
![_static/global_volume_mau2019.png](/OGGM/oggm/raw/14a26853528e8f81b777202ebffa09948389f32b/docs/_static/global_volume_mau2019.png)
Global volume estimated as a function of the multiplication factor applied to the ice creep parameter A, with five different setups: defaults, with sliding velocity, with lateral drag, and with rectangular and parabolic bed shapes only (instead of the default mixed parabolic/rectangular). In addition, we plotted the estimates from standard volume–area scaling (VAS, V = 0.034 S^{1.375}), Huss and Farinotti (2012) (HF2012) and Grinsted (2013) (G2013). The latter two estimates are provided for indication only as they are based on a different glacier inventory
Now, what you are probably asking yourself: how to choose the "best A" for my application?
Sorry, but we don't know yet. We are working on it though! At the moment, what we recommend to do is to calibrate A so that the regional (or even local) estimates match the volume consensus of Farinotti et al. (2019) using the :py:func:`workflow.calibrate_inversion_from_consensus` global task. This is what we do for the default pre-processed directories at the RGI region level, so that you don't have to worry about it.
We have written a documentation chapter about the :ref:`flprocons`.
Many things can go wrong when simulating all the world glaciers with a single model. We've tried our best, but still many glaciers cannot be simulated automatically. Possible reasons include complex glacier geometries that cannot be simulated by flowlines, very cold climates which don't allow melting to occur, or numerical instabilities during the simulation. Altogether, 4218 glaciers (3.6% of the total area worldwide) could not be modelled by OGGM in the standard global simulations. Some regions experience more errors than others (see the paper).
When you experience errors, you have to decide if they are due to an error in your code or a problem in OGGM itself. The number and type of errors might help you out to decide if you want to act and troubleshoot them (see below). Also, always keep in mind that the number of errors is less important than the glacier area they represent. Plenty or errors on small glaciers is not as bad as one large glacier missing.
Then, you have to carefully consider how to deal with missing glaciers. Most studies will upscale diagnostic quantities using power laws or interpolation: for example, use volume-area-scaling to compute the volume of glaciers that are missing after an OGGM run. Importantly, you have to always be aware that these quantities will be missing from the compiled run outputs, and should be accounted for in quantitative analyses.
This happens when a glacier grows larger than the original map boundaries. We recommend to increase the glacier map in this case, by setting cfg.PARAMS['border'] to a larger value, e.g. 100 or 200. The larger this value, the larger the glacier can grow (the drawback is that simulations become slower and hungrier in memory because the number of grid points increases as well). We do not recommend to go larger than 250. However, for these cases it is likely that something else is wrong in your workflow or OGGM itself.
This happens when the ice dynamics simulation is unstable. In OGGM we use an adaptive time stepping scheme (which should avoid these kind of situations), but we also implemented thresholds for small time steps: i.e. if a simulation requires very small time steps we exit with an error in order to avoid extremely slow runs. There is not much you can do here, unless maybe use a lower CFL value, or set your own thresholds for small time steps (at the cost of computation time).
Yes! You will be able to include your own inventory and glacier outlines in OGGM as long as the format of your shapefile is the same as the RGI file (v5 and v6 are supported). The attribute table should match the RGI format with the same amount of columns and variable names. See :ref:`outlines` for more information about the list of glacier attributes needed by OGGM. If you decide to use your own inventory (e.g. maybe because it has a better glacier outline) we encourage you to contact the GLIMS core team to let them know how your inventory improves the glacier digitalization compared to the current RGI version. If you want to see an example on how to give OGGM a different shapefile than RGI, have a look to this tutorial!
Short answer: the "Flux-based" model in OGGM is numerically unstable in some conditions
New in OGGM 1.6: in OGGM 1.6 and above, we use a considerably improved semi-implicit scheme. However, for technical reasons, the "flux-based" scheme is still used for multiple flowlines.
OGGM uses a CFL criterion to decide on the timestep to use during the ice dynamics model iteration. The "flux-based" scheme of OGGM is fast and flexible (e.g. it allows to compute the ice flow on multiple flowlines), but it is not following textbook recommendations on numerical stability.
See this github issue for a discussion pointing this out, and this example.
As of OGGM v1.2, we have fixed the most pressing issues. This blog post explains it in detail, but for a summary:
- the old algorithm was flawed, but did not result in significant errors at large scales
- the new algorithm is faster and more likely to be stable
- we don't guarantee statibility in 100% of the cases, but when the model becomes unstable it will raise an error.
We test OGGM for mass-conservation in several use cases. What might happen,
however, is that the calculated velocities display "wobbles" or artifacts,
which are a sign of instability. If this occurs, set the global parameter
cfg.PARAMS['cfl_number']
to a lower value (0.01 or 0.005 are worth a try).
[Farinotti_etal_2019] | (1, 2) Farinotti, D., Huss, M., Fürst, J. J., Landmann, J., Machguth, H., Maussion, F. and Pandit, A.: A consensus estimate for the ice thickness distribution of all glaciers on Earth, Nat. Geosci., 12(3), 168–173, doi:10.1038/s41561-019-0300-3, 2019. |
[Maussion_etal_2019] | Maussion, F., Butenko, A., Champollion, N., Dusch, M., Eis, J., Fourteau, K., Gregor, P., Jarosch, A. H., Landmann, J., Oesterle, F., Recinos, B., Rothenpieler, T., Vlug, A., Wild, C. T. and Marzeion, B.: The Open Global Glacier Model (OGGM) v1.1, Geosci. Model Dev., 12(3), 909–931, doi:10.5194/gmd-12-909-2019, 2019. |