/
arc.inf
124 lines (98 loc) · 5.43 KB
/
arc.inf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
ARC-FILE.INF, created by Keith Petersen, W8SDZ, 21-Sep-86, extracted
from UNARC.INF by Robert A. Freed.
From: Robert A. Freed
Subject: Technical Information for ARC files
Date: June 24, 1986
Note: In the following discussion, UNARC refers to my CP/M-80 program
for extracting files from MSDOS ARCs. The definitions of the ARC file
format are based on MSDOS ARC512.EXE.
ARCHIVE FILE FORMAT
-------------------
Component files are stored sequentially within an archive. Each entry
is preceded by a 29-byte header, which contains the directory
information. There is no wasted space between entries. (This is in
contrast to the centralized directory used by Novosielski libraries.
Although random access to subfiles within an archive can be noticeably
slower than with libraries, archives do have the advantage of not
requiring pre-allocation of directory space.)
Archive entries are normally maintained in sorted name order. The
format of the 29-byte archive header is as follows:
Byte 1: 1A Hex.
This marks the start of an archive header. If this byte is not found
when expected, UNARC will scan forward in the file (up to 64K bytes)
in an attempt to find it (followed by a valid compression version).
If a valid header is found in this manner, a warning message is
issued and archive file processing continues. Otherwise, the file is
assumed to be an invalid archive and processing is aborted. (This is
compatible with MS-DOS ARC version 5.12). Note that a special
exception is made at the beginning of an archive file, to accomodate
"self-unpacking" archives (see below).
Byte 2: Compression version, as follows:
0 = end of file marker (remaining bytes not present)
1 = unpacked (obsolete)
2 = unpacked
3 = packed
4 = squeezed (after packing)
5 = crunched (obsolete)
6 = crunched (after packing) (obsolete)
7 = crunched (after packing, using faster hash algorithm) (obsolete)
8 = crunched (after packing, using dynamic LZW variations)
Bytes 3-15: ASCII file name, nul-terminated.
(All of the following numeric values are stored low-byte first.)
Bytes 16-19: Compressed file size in bytes.
Bytes 20-21: File date, in 16-bit MS-DOS format:
Bits 15:9 = year - 1980
Bits 8:5 = month of year
Bits 4:0 = day of month
(All zero means no date.)
Bytes 22-23: File time, in 16-bit MS-DOS format:
Bits 15:11 = hour (24-hour clock)
Bits 10:5 = minute
Bits 4:0 = second/2 (not displayed by UNARC)
Bytes 24-25: Cyclic redundancy check (CRC) value (see below).
Bytes 26-29: Original (uncompressed) file length in bytes.
(This field is not present for version 1 entries, byte 2 = 1.
I.e., in this case the header is only 25 bytes long. Because
version 1 files are uncompressed, the value normally found in
this field may be obtained from bytes 16-19.)
SELF-UNPACKING ARCHIVES
-----------------------
A "self-unpacking" archive is one which can be renamed to a .COM file
and executed as a program. An example of such a file is the MS-DOS
program ARC512.COM, which is a standard archive file preceded by a
three-byte jump instruction. The first entry in this file is a simple
"bootstrap" program in uncompressed form, which loads the subfile
ARC.EXE (also uncompressed) into memory and passes control to it. In
anticipation of a similar scheme for future distribution of UNARC, the
program permits up to three bytes to precede the first header in an
archive file (with no error message).
CRC COMPUTATION
---------------
Archive files use a 16-bit cyclic redundancy check (CRC) for error
control. The particular CRC polynomial used is x^16 + x^15 + x^2 + 1,
which is commonly known as "CRC-16" and is used in many data
transmission protocols (e.g. DEC DDCMP and IBM BSC), as well as by
most floppy disk controllers. Note that this differs from the CCITT
polynomial (x^16 + x^12 + x^5 + 1), which is used by the XMODEM-CRC
protocol and the public domain CHEK program (although these do not
adhere strictly to the CCITT standard). The MS-DOS ARC program does
perform a mathematically sound and accurate CRC calculation. (We
mention this because it contrasts with some unfortunately popular
public domain programs we have witnessed, which from time immemorial
have based their calculation on an obscure magazine article which
contained a typographical error!)
Additional note (while we are on the subject of CRC's): The validity
of using a 16-bit CRC for checking an entire file is somewhat
questionable. Many people quote the statistics related to these
functions (e.g. "all two-bit errors, all single burst errors of 16 or
fewer bits, 99.997% of all single 17-bit burst errors, etc."), without
realizing that these claims are valid only if the total number of bits
checked is less than 32767 (which is why they are used in small-packet
data transmission protocols). I.e., for file sizes in excess of about
4K bytes, a 16-bit CRC is not really as good as what is often claimed.
This is not to say that it is bad, but there are more reliable methods
available (e.g. the 32-bit AUTODIN-II polynomial). (End of lecture!)
Bob Freed
62 Miller Road
Newton Centre, MA 02159
Telephone (617) 332-3533