-
Notifications
You must be signed in to change notification settings - Fork 0
/
settings.toml
44 lines (41 loc) · 2.74 KB
/
settings.toml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
# --------------------------------------
# Project : MagTag Data Logger
# Version : 0.1
# Date : 27 Feb 2023
# Author : OneOfTheInfiniteMonkeys
# Copyright : (c) Copyright OneOfTheInfiniteMonkeys All Rights Reserved
# Source Location : https://github.com/OneOfTheInfiniteMonkeys/MTDL
# License : MIT License - See distribution licence details
# : Applicable to only those elements authored by OneOfTheInfiniteMonkeys
# Hardware : Adafruit MagTag
# --------------------------------------
# setting.toml settings file
# Values in this file are unique to each device
# Requires CircuitPython 8.0.0 and later
GUIDStr = "00" # String, A unique ID string for this board - digits 0 to 9
m0 = "1.0" # float, 0.9826 Internal temperature sensor y=mx+c
c0 = "0.0" # float, 26.431 Internal temperature sensor y=mx+c
Sample_Period = "120" # Integer, in Seconds for sampling - too low bat runs down and the board heats up
Graph_Mode = "0" # Integer, 0=Overwrite, 1=Scroll L-to-R, 2=Scroll R-to-L
Segment_Shadow = "0" # Integer, 0 or 1 indicating if Segment shadows are shown
UseWiFiServices = "1" # Integer, 0 or 1 - Default 1 - Indicates if WiFi based services should be used
ipv4_address = "" # IPv4 address - Ensure unique on subnet e.g. 192.168.0.2
ipv4_subnet = "" # IPv4 Subnet - Typical Class C local / home subnet 255.255.255.0
ipv4_gateway = "" # IPv4 Gateway or router address on a home network when connected to an access point e.g. 192.168.0.254
ipv4_dns = "" # IPv4 DNS server, usually the router address on a home network e.g. 192.168.0.254
TimeServiceReqCounts = 5 # Number of wake events before local time is synced with internet time
#---------------------------------------
# To enable modifying files from the web. Web Workflow change this too!
# Leave the User field blank when you type the password into the browser.
# To auto-connect to Wi-Fi use the link below to access
# http://circuitpython.local/code/
# Remove the comments from the next four lines and set apropriate values
# CIRCUITPY_WIFI_SSID="" # Set your Access point name here
# CIRCUITPY_WIFI_PASSWORD="" # Set your Access point password here
# CIRCUITPY_WEB_API_PASSWORD = "passw0rd" # Set your own web interface password here!
# CIRCUITPY_WEB_API_PORT=80 # Typically leave alone at port 80
#---------------------------------------
# NOTE:
# boot.py in this distribution is already set to automatically disable
# the CIRCUITPY drive as required for this workflow.
# See boot.py for further details