Mainframe Assembly Guide Missing PVC Dimensions

[JeremyThiesen]

The Base Board and Motherboard Wall do not have dimensions in the MainFrameAssemblyGuide.pdf

I made some calculations based off of reading the instructions and giving some extra space since I am still awaiting some parts for my build.

Baseboard Length, Requires a 6" L-Bracket and a 24" L-Bracket, and with wiggle room maybee 34-36".

Baseboard Width, Requires 18" L-Bracket. With wiggle room, 20-22".

Motherboard Length, Requires 18" L-Bracket, with wiggle room, 20".
Motherboard Width, same as Baseboard, so 20-22".

Is that right?

[rklosinski]

its best to discuss construction on the slack channel I put together. Its monitored by camille and jake, with a few others that have assembled a food computer. register at http://www.plantcubed.com/support/ to obtain access.

[AdrianLLu]

To answer your question, the dimensions are in the .sldprt files. You can view these using the Solidworks viewer, which is called eDrawings. It's free software. This should be the link to the software: https://www.solidworks.com/sw/support/downloads.htm

Here are the dimensions that I used:
PVC Base Board, 32.875 in x 21.125 in
PVC Motherboard Dock Panel, 31.875 in x 21.375 in
PVC Motherboard Panel, 20.75 in x 15.75 in

[barwis]

@rklosinski I've registered like a month ago - never got an access.

[rklosinski]

Oversight on my part. Invite sent.

[barwis]

@rklosinski thank you :)