ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.mos

// name:     ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.mos [simulation checking]
// keywords: simulation ThermoSysPro.Examples.SimpleExamples
// status: correct
// teardown_command: rm -rf _ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.* ThermoSysPro.Examples.SimpleExamples.TestAirHumidity_* ThermoSysPro.Examples.SimpleExamples.TestAirHumidity ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.exe ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.cpp ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.makefile ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.libs ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.log ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.c ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.o output.log
//
// Simulation Results 
// Modelica Standard Library
//

loadModel(Modelica, {"3.2.3"}); getErrorString();
loadModel(ThermoSysPro); getErrorString();

simulate(ThermoSysPro.Examples.SimpleExamples.TestAirHumidity, stopTime=1000);  getErrorString();

res := OpenModelica.Scripting.compareSimulationResults(
"ThermoSysPro.Examples.SimpleExamples.TestAirHumidity_res.mat",
getEnvironmentVar("REFERENCEFILES")+"/ThermoSysPro/ThermoSysPro.Examples.SimpleExamples.TestAirHumidity.mat",
"ThermoSysPro.Examples.SimpleExamples.TestAirHumidity_diff.csv",
0.01, 0.0001,
{"singularPressureLoss.Q",
 "singularPressureLoss.T",
 "singularPressureLoss.deltaPf"});
 

// Result:
// true
// ""
// true
// ""
// record SimulationResult
//     resultFile = "ThermoSysPro.Examples.SimpleExamples.TestAirHumidity_res.mat",
//     simulationOptions = "startTime = 0.0, stopTime = 1000.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ThermoSysPro.Examples.SimpleExamples.TestAirHumidity', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
//     messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
// LOG_SUCCESS       | info    | The simulation finished successfully.
// "
// end SimulationResult;
// "[ThermoSysPro 3.2.0/FlueGases/Connectors.mo:3:3-51:22:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesOutlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/FlueGases/Connectors.mo:53:3-101:21:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesInlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/FlueGases/Connectors.mo:3:3-51:22:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesOutlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:703:3-754:22:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1185:3-1241:26:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/FlueGases/Connectors.mo:53:3-101:21:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesInlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/FlueGases/Connectors.mo:3:3-51:22:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesOutlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/FlueGases/Connectors.mo:53:3-101:21:writable] Warning: Connector .ThermoSysPro.FlueGases.Connectors.FlueGasesInlet is not balanced: The number of potential variables (7) is not equal to the number of flow variables (0).
// "
// {"Files Equal!"}
// endResult