ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.mos

// name:     ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.mos [simulation checking]
// keywords: simulation ThermoSysPro.Examples.SimpleExamples
// status: correct
// teardown_command: rm -rf _ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.* ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger_* ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.exe ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.cpp ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.makefile ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.libs ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.log ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.c ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.o output.log
//
// Simulation Results 
// Modelica Standard Library
//

loadModel(Modelica, {"3.2.3"}); getErrorString();
loadModel(ThermoSysPro); getErrorString();

simulate(ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger, stopTime=1000); getErrorString();

res := OpenModelica.Scripting.compareSimulationResults(
"ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger_res.mat",
getEnvironmentVar("REFERENCEFILES")+"/ThermoSysPro/ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger.mat",
"ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger_diff.csv",
0.01, 0.0001,
{"plateHeatExchanger.Qf","plateHeatExchanger.Qc",
 "plateHeatExchanger.Tec","plateHeatExchanger.Tef","plateHeatExchanger.Tsc","plateHeatExchanger.Tsf",
 "plateHeatExchanger.DPf","plateHeatExchanger.DPc"});

// Result:
// true
// ""
// true
// ""
// record SimulationResult
//     resultFile = "ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger_res.mat",
//     simulationOptions = "startTime = 0.0, stopTime = 1000.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'ThermoSysPro.Examples.SimpleExamples.TestStaticWaterWaterExchanger', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
//     messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
// LOG_SUCCESS       | info    | The simulation finished successfully.
// "
// end SimulationResult;
// "[ThermoSysPro 3.2.0/WaterSteam/Connectors.mo:3:3-43:17:writable] Warning: Connector .ThermoSysPro.WaterSteam.Connectors.FluidInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/WaterSteam/Connectors.mo:87:3-127:18:writable] Warning: Connector .ThermoSysPro.WaterSteam.Connectors.FluidOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1494:3-1528:30:writable] Warning: sat.T was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1494:3-1528:30:writable] Warning: sat.dpT was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.T was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.dpT was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.cpt was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.vt was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.vp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.vtt was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.vpp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1552:3-1581:34:writable] Warning: sat.vtp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/IF97_packages.mo:1089:9-1089:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/IF97_packages.mo:851:9-851:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/IF97_packages.mo:784:9-784:27:writable] Warning: cv was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:162:3-214:22:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:252:3-295:26:writable] Warning: pro.duph was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:252:3-295:26:writable] Warning: pro.duhp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:252:3-295:26:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1270:3-1340:18:writable] Warning: pro.duph was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1270:3-1340:18:writable] Warning: pro.duhp was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/WaterSteam/Connectors.mo:87:3-127:18:writable] Warning: Connector .ThermoSysPro.WaterSteam.Connectors.FluidOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:703:3-754:22:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/Properties/WaterSteam/Common.mo:1185:3-1241:26:writable] Warning: pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.
// [ThermoSysPro 3.2.0/WaterSteam/Connectors.mo:87:3-127:18:writable] Warning: Connector .ThermoSysPro.WaterSteam.Connectors.FluidOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
// [ThermoSysPro 3.2.0/WaterSteam/Connectors.mo:3:3-43:17:writable] Warning: Connector .ThermoSysPro.WaterSteam.Connectors.FluidInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).
// Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
// "
// {"Files Equal!"}
// endResult