Compiler/FrontEnd/ModelicaBuiltin.mo

/*
 * This file is part of OpenModelica.
 *
 * Copyright (c) 1998-CurrentYear, Linköping University,
 * Department of Computer and Information Science,
 * SE-58183 Linköping, Sweden.
 *
 * All rights reserved.
 *
 * THIS PROGRAM IS PROVIDED UNDER THE TERMS OF GPL VERSION 3 
 * AND THIS OSMC PUBLIC LICENSE (OSMC-PL). 
 * ANY USE, REPRODUCTION OR DISTRIBUTION OF THIS PROGRAM CONSTITUTES RECIPIENT'S  
 * ACCEPTANCE OF THE OSMC PUBLIC LICENSE.
 *
 * The OpenModelica software and the Open Source Modelica
 * Consortium (OSMC) Public License (OSMC-PL) are obtained
 * from Linköping University, either from the above address,
 * from the URLs: http://www.ida.liu.se/projects/OpenModelica or  
 * http://www.openmodelica.org, and in the OpenModelica distribution. 
 * GNU version 3 is obtained from: http://www.gnu.org/copyleft/gpl.html.
 *
 * This program is distributed WITHOUT ANY WARRANTY; without
 * even the implied warranty of  MERCHANTABILITY or FITNESS
 * FOR A PARTICULAR PURPOSE, EXCEPT AS EXPRESSLY SET FORTH
 * IN THE BY RECIPIENT SELECTED SUBSIDIARY LICENSE CONDITIONS
 * OF OSMC-PL.
 *
 * See the full OSMC Public License conditions for more details.
 *
 */

function der "derivative of the input expression"
  input Real x(unit="'p");
  output Real dx(unit="'p/s");
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'der()'\">der()</a>
</html>"));
end der;

function initial
  output Boolean isInitial;
  annotation(__OpenModelica_Impure = true);
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'initial()'\">initial()</a>
</html>"));
end initial;

function terminal
  output Boolean isTerminal;
  annotation(__OpenModelica_Impure = true);
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'terminal()'\">terminal()</a>
</html>"));
end terminal;

type AssertionLevel = enumeration(error, warning) annotation(Documentation(info="<html>
  Used by <a href=\"modelica://assert\">assert()</a>
</html>"));

function assert
  input Boolean condition;
  input String message;
  input AssertionLevel level;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'assert()'\">assert()</a>
</html>"));
end assert;

function constrain
  input Real i1;
  input Real i2;
  input Real i3;
  output Real o1;
external "builtin";
annotation(version="Dymola / MSL 1.6");
end constrain;

function sample "Trigger time events"
  parameter input Real start(fixed=false);
  parameter input Real interval(fixed=false);
  output Boolean isSample;
  annotation(__OpenModelica_Impure = true);
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sample()'\">sample()</a>
</html>"));
end sample;

function ceil "Round a real number towards plus infinity"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'ceil()'\">ceil()</a>
</html>"));
end ceil;

function floor "Round a real number towards minus infinity"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'floor()'\">floor()</a>
</html>"));
end floor;

function integer "Round a real number towards minus infinity"
  input Real x;
  output Integer y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'integer()'\">integer()</a>
</html>"));
end integer;

function sqrt "Square root"
  input Real x(unit="'p");
  output Real y(unit="'p(1/2)");
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sqrt()'\">sqrt()</a>
</html>"));
end sqrt;

function sign
  input Real v;
  output Integer _sign;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sign()'\">sign()</a>
</html>"));
/* We do this with external "builtin" for now. But maybe we should inline it instead...
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  _sign := noEvent(if v > 0 then 1 else if v < 0 then -1 else 0);
 */
end sign;

function identity
  input Integer arraySize;
  output Integer[arraySize,arraySize] outArray;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'identity()'\">identity()</a>
</html>"));
end identity;

function semiLinear
  input Real x;
  input Real positiveSlope;
  input Real negativeSlope;
  output Real result;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'semiLinear()'\">semiLinear()</a>
</html>"));
end semiLinear;

function edge
  input Boolean b;
  output Boolean edgeEvent;
  // TODO: Ceval parameters? Needed to remove the builtin handler
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'edge()'\">edge()</a>
</html>"));
end edge;

function sin "Sine"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sin()'\">sin()</a>
</html>"));
end sin;

function cos "Cosine"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'cos()'\">cos()</a>
</html>"));
end cos;

function tan "Tangent (u shall not be -pi/2, pi/2, 3*pi/2, ...)"
  input Real u;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'tan()'\">tan()</a>
</html>"));
end tan;

function sinh "Hyperbolic sine"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sinh()'\">sinh()</a>
</html>"));
end sinh;

function cosh "Hyperbolic cosine"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'cosh()'\">cosh()</a>
</html>"));
end cosh;

function tanh "Hyperbolic tangent"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'tanh()'\">tanh()</a>
</html>"));
end tanh;

function asin "Inverse sine (-1 <= u <= 1)"
  input Real u;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'asin()'\">asin()</a>
</html>"));
end asin;

function acos "Inverse cosine (-1 <= u <= 1)"
  input Real u;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'acos()'\">acos()</a>
</html>"));
end acos;

function atan "Inverse tangent"
  input Real x;
  output Real y;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'atan()'\">atan()</a>
</html>"));
end atan;

function atan2 "Four quadrant inverse tangent"
  input Real y;
  input Real x;
  output Real z;
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'atan2()'\">atan2()</a>
</html>"));
end atan2;

function exp "Exponential, base e"
  input Real x(unit="1");
  output Real y(unit="1");
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'exp()'\">exp()</a>
</html>"));
end exp;

function log "Natural (base e) logarithm (u shall be > 0)"
  input Real u(unit="1");
  output Real y(unit="1");
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'log()'\">log()</a>
</html>"));
end log;

function log10 "Base 10 logarithm (u shall be > 0)"
  input Real u(unit="1");
  output Real y(unit="1");
external "builtin";
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'log10()'\">log10()</a>
</html>"));
end log10;

function homotopy
  input Real actual;
  input Real simplified;
  output Real outValue;
external "builtin";
annotation(version="Modelica 3.2");
end homotopy;

function linspace
  input Real x1 "start";
  input Real x2 "end";
  input Integer n "number";
  output Real v[n];
annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'linspace()'\">linspace()</a>
</html>"));
algorithm
  assert(n >= 2, "linspace requires n>=2 but got " + String(n));
  v := {x1 + (x2-x1)*(i-1)/(n-1) for i in 1:n};
end linspace;

function div = overload(OpenModelica.Internal.intDiv,OpenModelica.Internal.realDiv)
  "Integer part of a division of two Real numbers"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'div()'\">div()</a>
</html>"));

function mod = overload(OpenModelica.Internal.intMod,OpenModelica.Internal.realMod)
  "Integer modulus of a division of two Real numbers"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'mod()'\">mod()</a>
</html>"));

function rem = overload(OpenModelica.Internal.intRem,OpenModelica.Internal.realRem)
  "Integer remainder of the division of two Real numbers"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'rem()'\">rem()</a>
</html>"));

function abs = overload(OpenModelica.Internal.intAbs,OpenModelica.Internal.realAbs)
  "Absolute value"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'abs()'\">abs()</a>
</html>"));

function outerProduct = overload(OpenModelica.Internal.outerProductInt,OpenModelica.Internal.outerProductReal)
  "Outer product of two vectors"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'outerProduct()'\">outerProduct()</a>
</html>"));

function cross = overload(OpenModelica.Internal.crossInt,OpenModelica.Internal.crossReal)
  "Cross product of two 3-vectors"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'cross()'\">cross()</a>
</html>"));

function skew = overload(OpenModelica.Internal.skewInt,OpenModelica.Internal.skewReal)
  "The skew matrix associated with the vector"
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'skew()'\">skew()</a>
</html>"));

// Dummy functions that can't be properly defined in Modelica, but used by
// SCodeFlatten to define which builtin functions exist (SCodeFlatten doesn't
// care how the functions are defined, only if they exist or not).

function delay "Delay expression"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'delay()'\">delay()</a>
</html>"));
end delay;

function min "Returns the smallest element"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'min()'\">min()</a>
</html>"));
end min;

function max "Returns the largest element"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'max()'\">max()</a>
</html>"));
end max;

function sum
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'sum()'\">sum()</a>
</html>"));
end sum;

function product
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'product()'\">product()</a>
</html>"));
end product;

function transpose
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'transpose()'\">transpose()</a>
</html>"));
end transpose;

function symmetric "Returns a symmetric matrix"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'symmetric()'\">symmetric()</a>
</html>"));
end symmetric;

function smooth "Indicate smoothness of expression"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'smooth()'\">smooth()</a>
</html>"));
end smooth;

function diagonal "Returns a diagonal matrix"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'diagonal()'\">diagonal()</a>
</html>"));
end diagonal;

function cardinality "Number of connectors in connection"
  input Real c;
  output Integer numOccurances;
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'cardinality()'\">cardinality()</a>
</html>"),version="Deprecated");
end cardinality;

function array
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'array()'\">array()</a>
</html>"));
end array;

function zeros "Returns a zero array"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'zeros()'\">zeros()</a>
</html>"));
end zeros;

function ones "Returns a one array"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'ones()'\">ones()</a>
</html>"));
end ones;

function fill "Returns an array with all elements equal"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'fill()'\">fill()</a>
</html>"));
end fill;

function noEvent "Turn off event triggering"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'noEvent()'\">noEvent()</a>
</html>"));
end noEvent;

function pre "Refer to left limit"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'pre()'\">pre()</a>
</html>"));
end pre;

function change "Indicate discrete variable changing"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'change()'\">change()</a>
</html>"));
end change;

function reinit "Reinitialize state variable"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'reinit()'\">reinit()</a>
</html>"));
end reinit;

function ndims "Number of array dimensions"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'ndims()'\">ndims()</a>
</html>"));
end ndims;

function size "Returns dimensions of an array"
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'size()'\">size()</a>
</html>"));
end size;

function scalar
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'scalar()'\">scalar()</a>
</html>"));
end scalar;

function vector
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'vector()'\">vector()</a>
</html>"));
end vector;

function matrix
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'matrix()'\">matrix()</a>
</html>"));
end matrix;

function cat
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'cat()'\">cat()</a>
</html>"));
end cat;

function rooted "Not yet standard Modelica, but in the MSL since 3-4 years now."
  external "builtin";
  annotation(Documentation(info="<html>
<p><b>Not yet standard Modelica, but in the MSL since 3-4 years now.</b></p>
<h4>Syntax</h4>
<blockquote>
<pre><b>rooted</b>(x)</pre>
</blockquote>
<h4>Description</h4>
<p>The operator \"rooted\" was introduced to improve efficiency: 
A tool that constructs the graph with the Connections.branch/.root etc. 
built-in operators has to cut the graph in order to arrive at \"spanning trees\". 
If there is a statement \"Connections.branch(A,B)\", then \"rooted(A)\" returns true, 
if \"A\" is closer to the root of the spanning tree as \"B\". Otherwise false is returned. 
For the MultiBody library this allows to avoid unnecessary small linear systems of equations.
</p>
<h4>Known Bugs</h4>
<p>
OpenModelica, <b>rooted</b>(x) always returns true.
See <a href=\"https://trac.modelica.org/Modelica/ticket/95\">rooted ticket in the Modelica Trac</a> for details.
</p>
</html>"),version="Dymola / MSL 3");
end rooted;

function actualStream
  external "builtin";
end actualStream;

function inStream
  external "builtin";
  annotation(Documentation(info="<html>
  See <a href=\"modelica://ModelicaReference.Operators.'inStream()'\">inStream()</a>
</html>"));
end inStream;

encapsulated package Connections
  function branch
    external "builtin";
  end branch;

  function root
    external "builtin";
  end root;

  function potentialRoot
    external "builtin";
  end potentialRoot;

  function isRoot
    external "builtin";
  end isRoot;
end Connections;

encapsulated package Subtask
  type SamplingType = enumeration(Disabled, Continuous, Periodic);
  
  function decouple
    external "builtin";
  end decouple;

  function activated
    output Boolean activated;
    external "builtin";
  end activated;

  function lastInterval
    external "builtin";
  end lastInterval;
end Subtask;

function print "Prints to stdout, useful for debugging."
  input String str;
  annotation(__OpenModelica_Impure = true);
external "builtin";
annotation(version="OpenModelica extension");
end print;

function classDirectory "No clue what it does as it's not standardized"
  output String str;
external "builtin";
annotation(version="Dymola / MSL 2.2.1");
end classDirectory;

function getInstanceName
  output String instanceName;
external "builtin";
  annotation(Documentation(info="<html>
<h4>
Modelica definition:
</h4>
<p>
Returns a string with the name of the model/block that is simulated,
appended with the fully qualified name of the instance in which this
function is called.
</p>

<p>
If MyLib.Vehicle is simulated, the call of <pre>getInstanceName()</pre> might return:
  <pre>Vehicle.engine.controller</pre>
</p>
<p>
Outside of a model or block, the return value is not specified.
</p>

<h4>
OpenModelica specifics:
</h4>

<p>
When OpenModelica does not have a prefix (e.g. in functions or packages),
it returns the name of the model that is simulated suffixed by
<pre><Prefix.NOPRE()></pre>, e.g. <pre>Vehicle.<Prefix.NOPRE()></pre>.
</p>

<p>
If no class was being simulated, the last simulated class or a default will be used
(applicable for functions called from the scripting environment).
</p>
</html>
"),version="Modelica 3.3");
end getInstanceName;

function spatialDistribution "Not yet implemented"
  input Real in0;
  input Real x;
  input Real initialPoints[:];
  input Real initialValues[size(initialPoints)];
  input Real in1;
  input Boolean positiveVelocity;
  output Real val;
external "builtin";
annotation(version="Modelica 3.3");
end spatialDistribution;

/* Actually contains more...
record SimulationResult
  String resultFile;
  String simulationOptions;
  String messages;
end SimulationResult; */

encapsulated package OpenModelica "OpenModelica internal defintions and scripting functions"

type Code "Code quoting is not a uniontype yet because that would require enabling MetaModelica extensions in the regular compiler.
Besides, it has special semantics."

type TypeName "A path, for example the name of a class, e.g. A.B.C or .A.B" end TypeName;
type VariableName "A variable name, e.g. a.b or a[1].b[3].c" end VariableName;
type VariableNames "An array of variable names, e.g. {a.b,a[1].b[3].c}, or a single VariableName" end VariableNames;

end Code;

package Internal "Contains internal implementations, e.g. overloaded builtin functions"
  function intAbs
    input Integer v;
    output Integer o;
  external "builtin" o=abs(v);
  annotation(preferredView="text");
  end intAbs;

  function realAbs
    input Real v;
    output Real o;
  external "builtin" o=abs(v);
  annotation(preferredView="text");
  end realAbs;

  function intDiv
    input Integer x;
    input Integer y;
    output Integer z;
  external "builtin" z=div(x,y);
  annotation(preferredView="text");
  end intDiv;

  function realDiv
    input Real x;
    input Real y;
    output Real z;
  external "builtin" z=div(x,y);
  annotation(preferredView="text");
  end realDiv;

  function intMod
    input Integer x;
    input Integer y;
    output Integer z;
  external "builtin" z=mod(x,y);
  annotation(preferredView="text");
  end intMod;

  function realMod
    input Real x;
    input Real y;
    output Real z;
  external "builtin" z=mod(x,y);
  annotation(preferredView="text");
  end realMod;

  function intRem
    input Integer x;
    input Integer y;
    output Integer z;
  external "builtin" z=rem(x,y);
  annotation(preferredView="text");
  end intRem;

  function realRem
    input Real x;
    input Real y;
    output Real z;
  external "builtin" z=rem(x,y);
  annotation(preferredView="text");
  end realRem;

  function outerProductInt
    input Integer[:] v1;
    input Integer[:] v2;
    output Integer[size(v1,1),size(v2,1)] o;
    external "builtin" o=outerProduct(v1,v2);
  /* Not working due to problems with matrix and transpose :(
  algorithm
    o := matrix(v1) * transpose(matrix(v2));
  */
  annotation(preferredView="text");
  end outerProductInt;

  function outerProductReal
    input Real[:] v1;
    input Real[:] v2;
    output Real[size(v1,1),size(v2,1)] o;
    external "builtin" o=outerProduct(v1,v2);
  /* Not working due to problems with matrix and transpose :(
  algorithm
    o := matrix(v1) * transpose(matrix(v2));
  */
  annotation(preferredView="text");
  end outerProductReal;

  function crossInt
    input Integer[3] x;
    input Integer[3] y;
    output Integer[3] z;
    annotation(__OpenModelica_EarlyInline = true);
    external "builtin" cross(x,y,z);
  /* Not working due to problems with non-builtin overloaded functions
  algorithm
    z := { x[2]*y[3]-x[3]*y[2] , x[3]*y[1]-x[1]*y[3] , x[1]*y[2]-x[2]*y[1] };
  */
  annotation(preferredView="text");
  end crossInt;

  function crossReal
    input Real[3] x;
    input Real[3] y;
    output Real[3] z;
    annotation(__OpenModelica_EarlyInline = true);
    external "builtin" cross(x,y,z);
  /* Not working due to problems with non-builtin overloaded functions
  algorithm
    z := { x[2]*y[3]-x[3]*y[2] , x[3]*y[1]-x[1]*y[3] , x[1]*y[2]-x[2]*y[1] };
  */
  annotation(preferredView="text");
  end crossReal;

  function skewInt
    input Integer[3] x;
    output Integer[3,3] y;
    external "builtin" skew(x,y);
  annotation(preferredView="text");
  end skewInt;

  function skewReal
    input Real[3] x;
    output Real[3,3] y;
    external "builtin" skew(x,y);
  end skewReal;
annotation(preferredView="text");
end Internal;

package Scripting
  
import OpenModelica.Code.TypeName;
import OpenModelica.Code.VariableName;
import OpenModelica.Code.VariableNames;

record CheckSettingsResult
  String OPENMODELICAHOME,OPENMODELICALIBRARY,OMC_PATH;
  Boolean OMC_FOUND;
  String MODELICAUSERCFLAGS,WORKING_DIRECTORY;
  Boolean CREATE_FILE_WORKS,REMOVE_FILE_WORKS;
  String OS, SYSTEM_INFO,SENDDATALIBS,C_COMPILER;
  Boolean C_COMPILER_RESPONDING;
  String CONFIGURE_CMDLINE;
annotation(preferredView="text");
end CheckSettingsResult;

function checkSettings "Display some diagnostics"
  output CheckSettingsResult result;
external "builtin";
annotation(preferredView="text");
end checkSettings;

function loadFile "load file (*.mo) and merge it with the loaded AST"
  input String fileName;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end loadFile;
 
function loadString "Parses the data and merges the resulting AST with the
  loaded AST.
  If a filename is given, it is used to provide error-messages as if the string
was read in binary format from a file with the same name.
  The file is converted to UTF-8 from the given character set.
  "
  input String data;
  input String filename := "<interactive>";
  input String encoding := "UTF-8";
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end loadString;

function parseString
  input String data;
  input String filename := "<interactive>";
  output TypeName names[:];
external "builtin";
annotation(preferredView="text");
end parseString;

function parseFile
  input String filename;
  output TypeName names[:];
external "builtin";
annotation(preferredView="text");
end parseFile;

function loadFileInteractiveQualified
  input String filename;
  output TypeName names[:];
external "builtin";
annotation(preferredView="text");
end loadFileInteractiveQualified;

function loadFileInteractive
  input String filename;
  output TypeName names[:];
external "builtin";
annotation(preferredView="text");
end loadFileInteractive;

function system "Similar to system(3). Executes the given command in the system shell."
  input String callStr "String to call: bash -c $callStr";
  output Integer retval "Return value of the system call; usually 0 on success";
external "builtin" annotation(__OpenModelica_Impure=true);
annotation(preferredView="text");
end system;

function saveAll "save the entire loaded AST to file"
  input String fileName;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end saveAll;

function help "display the OpenModelica help text"
  output String helpText;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  helpText := readFile(getInstallationDirectoryPath() + "/share/doc/omc/omc_helptext.txt");
annotation(preferredView="text");
end help;

function clear
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end clear;

function clearVariables
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end clearVariables;

function enableSendData
  input Boolean enabled;
  output Boolean success;
external "builtin";
end enableSendData;

function setDataPort
  input Integer port;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setDataPort;

function generateHeader
  input String fileName;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end generateHeader;

function generateSeparateCode
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end generateSeparateCode;

function setLinker
  input String linker;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setLinker;

function setLinkerFlags
  input String linkerFlags;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setLinkerFlags;

function setCompiler
  input String compiler;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCompiler;

function setCXXCompiler
  input String compiler;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCXXCompiler;

function verifyCompiler
  output Boolean compilerWorks;
external "builtin";
annotation(preferredView="text");
end verifyCompiler;

function setCompilerPath
  input String compilerPath;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCompilerPath;

function getCompileCommand
  output String compileCommand;
external "builtin";
annotation(preferredView="text");
end getCompileCommand;

function setCompileCommand
  input String compileCommand;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCompileCommand;

function setPlotCommand
  input String plotCommand;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setPlotCommand;

function getSettings
  output String settings;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  settings :=
    "Compile command: " + getCompileCommand() + "\n" +
    "Temp folder path: " + getTempDirectoryPath() + "\n" +
    "Installation folder: " + getInstallationDirectoryPath() + "\n" +
    "Modelica path: " + getModelicaPath() + "\n";
annotation(preferredView="text");
end getSettings;

function setTempDirectoryPath
  input String tempDirectoryPath;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setTempDirectoryPath;

function getTempDirectoryPath
  output String tempDirectoryPath;
external "builtin";
annotation(preferredView="text");
end getTempDirectoryPath;

function getEnvironmentVar
  input String var;
  output String value "returns empty string on failure";
external "builtin";
annotation(preferredView="text");
end getEnvironmentVar;

function setEnvironmentVar
  input String var;
  input String value;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setEnvironmentVar;

function appendEnvironmentVar
  input String var;
  input String value;
  output String result "returns \"error\" if the variable could not be appended";
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  result := if setEnvironmentVar(var,getEnvironmentVar(var)+value) then getEnvironmentVar(var) else "error";
annotation(preferredView="text");
end appendEnvironmentVar;
        
function setInstallationDirectoryPath "Sets the OPENMODELICAHOME environment variable. Use this method instead of setEnvironmentVar"
  input String installationDirectoryPath;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setInstallationDirectoryPath;

function getInstallationDirectoryPath "This returns OPENMODELICAHOME if it is set; on some platforms the default path is returned if it is not set."
  output String installationDirectoryPath;
external "builtin";
annotation(preferredView="text");
end getInstallationDirectoryPath;

function setModelicaPath "The Modelica Library Path - MODELICAPATH in the language specification; OPENMODELICALIBRARY in OpenModelica."
  input String modelicaPath;
  output Boolean success;
external "builtin";
annotation(Documentation(info="<html>
See <a href=\"modelica://OpenModelica.Scripting.loadModel\">loadModel()</a> for a description of what the MODELICAPATH is used for.
</html>"),
  preferredView="text");
end setModelicaPath;

function getModelicaPath "Get the Modelica Library Path"
  output String modelicaPath;
external "builtin";
annotation(Documentation(info="<html>
See <a href=\"modelica://OpenModelica.Scripting.loadModel\">loadModel()</a> for a description of what the MODELICAPATH is used for.
</html>"),
  preferredView="text");
end getModelicaPath;

function setCompilerFlags
  input String compilerFlags;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCompilerFlags;

function setDebugFlags "example input: failtrace,-noevalfunc"
  input String debugFlags;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+d=" + debugFlags);
annotation(preferredView="text");
end setDebugFlags;

function setPreOptModules "example input: removeFinalParameters,removeSimpleEquations,expandDerOperator"
  input String modules;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+preOptModules=" + modules);
annotation(preferredView="text");
end setPreOptModules;

function setPastOptModules "example input: lateInline,inlineArrayEqn,removeSimpleEquations"
  input String modules;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+pastOptModules=" + modules);
annotation(preferredView="text");
end setPastOptModules;

function setIndexReductionMethod "example input: dummyDerivative"
  input String method;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+indexReductionMethod=" + method);
annotation(preferredView="text");
end setIndexReductionMethod;

function setCommandLineOptions
  "The input is a regular command-line flag given to OMC, e.g. +d=failtrace or +g=MetaModelica"
  input String option;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setCommandLineOptions;

function getVersion
  "Returns the version of the Modelica compiler"
  input TypeName cl := $TypeName(OpenModelica);
  output String version;
external "builtin";
annotation(preferredView="text");
end getVersion;

function readFile
  "The contents of the given file are returned.
  Note that if the function fails, the error message is returned as a string instead of multiple output or similar."
  input String fileName;
  output String contents;
external "builtin" annotation(__OpenModelica_Impure=true);
annotation(preferredView="text");
end readFile;

function writeFile
  "Write the data to file. Returns true on success."
  input String fileName;
  input String data;
  input Boolean append := false;
  output Boolean success;
external "builtin" annotation(__OpenModelica_Impure=true);
annotation(preferredView="text");
end writeFile;

function readFileShowLineNumbers "
  Prefixes each line in the file with <n>:, where n is the line number.
  Note: Scales O(n^2)"
  input String fileName;
  output String out;
protected
  String line;
  Integer num:=1;
algorithm
  out := "";
  for line in strtok(readFile(fileName),"\n") loop
    out := out + String(num) + ": " + line + "\n";
    num := num + 1;
  end for;
annotation(preferredView="text");
end readFileShowLineNumbers;

function readFilePostprocessLineDirective "
  Searches lines for the #modelicaLine directive. If it is found, all lines up
  until the next #modelicaLine or #endModelicaLine are put on a single file,
  following a #line linenumber \"filename\" line.
  This causes GCC to output an executable that we can set breakpoints in and
  debug.
  Note: You could use a stack to keep track of start/end of #modelicaLine and
  match them up. But this is not really desirable since that will cause extra
  breakpoints for the same line (you would get breakpoints before and after
  each case if you break on a match-expression, etc).
  "
  input String fileName;
  output String out;
protected
  constant String regexStart := "^ *..#modelicaLine";
  constant String regexEnd := "^ *..#endModelicaLine";
  constant String regexSplit := "^ *..#modelicaLine .([A-Za-z.]*):([0-9]*):[0-9]*-[0-9]*:[0-9]*...$";
  constant Integer numInRegex := 3;
  String str,line,currentModelicaFileName;
  Integer lineNumInOutputFile:=1,numMatches:=0;
  Boolean insideModelicaLine:=false;
  String splitLine[numInRegex] := {"","",""};
algorithm
  str := readFile(fileName);
  out := "";
  for line in strtok(str,"\n") loop
    (numMatches,splitLine) := regex(line,regexSplit,numInRegex);
    if numMatches == 3 then
      insideModelicaLine := true;
      out := out + "#line " + splitLine[3] + " \"" + splitLine[2] + "\"\n";
      lineNumInOutputFile := lineNumInOutputFile + 1;
    elseif regexBool(line,regexEnd) then
      insideModelicaLine := false;
      out := out + "\n" + "#line " + String(lineNumInOutputFile+1) + " \"" + fileName + "\"\n";
      lineNumInOutputFile := lineNumInOutputFile + 3;
    elseif insideModelicaLine then
      out := out + " " + line;
    else
      out := out + line + "\n";
      lineNumInOutputFile := lineNumInOutputFile + 1;
    end if;
  end for;
annotation(preferredView="text");
end readFilePostprocessLineDirective;

function regex  "Sets the error buffer and returns -1 if the regex does not compile.

  The returned result is the same as POSIX regex():
  The first value is the complete matched string
  The rest are the substrings that you wanted.
  For example:
  regex(lorem,\" \\([A-Za-z]*\\) \\([A-Za-z]*\\) \",maxMatches=3)
  => {\" ipsum dolor \",\"ipsum\",\"dolor\"}
  This means if you have n groups, you want maxMatches=n+1
"
  input String str;
  input String re;
  input Integer maxMatches := 1 "The maximum number of matches that will be returned";
  input Boolean extended := true "Use POSIX extended or regular syntax";
  input Boolean caseInsensitive := false;
  output Integer numMatches "-1 is an error, 0 means no match, else returns a number 1..maxMatches";
  output String matchedSubstrings[maxMatches] "unmatched strings are returned as empty";
external "builtin";
annotation(preferredView="text");
end regex;

function regexBool "Returns true if the string matches the regular expression"
  input String str;
  input String re;
  input Boolean extended := true "Use POSIX extended or regular syntax";
  input Boolean caseInsensitive := false;
  output Boolean matches;
protected
  Integer numMatches;
algorithm
  numMatches := regex(str,re,0,extended,caseInsensitive);
  matches := numMatches == 1;
annotation(preferredView="text");
end regexBool;

function readFileNoNumeric
  "Returns the contents of the file, with anything resembling a (real) number stripped out, and at the end adding:
  Filter count from number domain: n.
  This should probably be changed to multiple outputs; the filtered string and an integer.
  Does anyone use this API call?"
  input String fileName;
  output String contents;
external "builtin";
annotation(preferredView="text");
end readFileNoNumeric;

function getErrorString
  "[file.mo:n:n-n:n:b] Error: message"
  output String errorString;
external "builtin";
annotation(preferredView="text");
end getErrorString;

function getMessagesString
  "see getErrorString()"
  output String messagesString;
external "builtin" messagesString=getErrorString();
annotation(preferredView="text");
end getMessagesString;

record SourceInfo
  String filename;
  Boolean readonly;
  Integer lineStart,columnStart,lineEnd,columnEnd;
annotation(preferredView="text");
end SourceInfo;

type ErrorKind = enumeration(
  syntax "syntax errors",
  grammar "grammatical errors",
  translation "instantiation errors: up to flat modelica",
  symbolic "symbolic manipulation error, simcodegen, up to executable file",
  runtime "simulation/function runtime error",
  scripting "runtime scripting /interpretation error"
);
type ErrorLevel = enumeration(notification,warning,error);

record ErrorMessage
  SourceInfo info;
  String message "After applying the individual arguments";
  ErrorKind kind;
  ErrorLevel level;
  Integer id "Internal ID of the error (just ignore this)";
annotation(preferredView="text");
end ErrorMessage;

function getMessagesStringInternal
  "{{[file.mo:n:n-n:n:b] Error: message, TRANSLATION, Error, code}}"
  output ErrorMessage[:] messagesString;
external "builtin";
annotation(preferredView="text");
end getMessagesStringInternal;

function clearMessages "Clears the error buffer"
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end clearMessages;

function runScript "Runs the mos-script specified by the filename."
  input String fileName "*.mos";
  output String result;
external "builtin";
annotation(preferredView="text");
end runScript;

function echo "echo(false) disables Interactive output, echo(true) enables it again."
  input Boolean setEcho;
  output Boolean newEcho;
external "builtin";
annotation(preferredView="text");
end echo;

function getClassesInModelicaPath "MathCore-specific or not? Who knows!"
  output String classesInModelicaPath;
external "builtin";
annotation(preferredView="text");
end getClassesInModelicaPath;

function strictRMLCheck "Checks if any loaded function"
  output String message "empty if there was no problem";
external "builtin";
annotation(preferredView="text");
end strictRMLCheck;

/* These don't influence anything...
function getClassNamesForSimulation
  output String classNamesForSimulation;
external "builtin";
end getClassNamesForSimulation;

function setClassNamesForSimulation
  input String classNamesForSimulation;
  output Boolean success;
external "builtin";
end setClassNamesForSimulation;
*/

function getAnnotationVersion
  output String annotationVersion;
external "builtin";
annotation(preferredView="text");
end getAnnotationVersion;

function setAnnotationVersion
  input String annotationVersion;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+annotationVersion=" + annotationVersion);
annotation(preferredView="text");
end setAnnotationVersion;

function getNoSimplify
  output Boolean noSimplify;
external "builtin";
annotation(preferredView="text");
end getNoSimplify;

function setNoSimplify
  input Boolean noSimplify;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setNoSimplify;

function getVectorizationLimit
  output Integer vectorizationLimit;
external "builtin";
annotation(preferredView="text");
end getVectorizationLimit;

function setVectorizationLimit
  input Integer vectorizationLimit;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+v=" + String(vectorizationLimit));
annotation(preferredView="text");
end setVectorizationLimit;

function setShowAnnotations
  input Boolean show;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setShowAnnotations;

function getShowAnnotations
  output Boolean show;
external "builtin";
annotation(preferredView="text");
end getShowAnnotations;

function setOrderConnections
  input Boolean orderConnections;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+orderConnections=" + String(orderConnections));
annotation(preferredView="text");
end setOrderConnections;

function getOrderConnections
  output Boolean orderConnections;
external "builtin";
annotation(preferredView="text");
end getOrderConnections;

function setLanguageStandard
  input String inVersion;
  output Boolean success;
  annotation(__OpenModelica_EarlyInline = true);
algorithm
  success := setCommandLineOptions("+std=" + inVersion);
annotation(preferredView="text");
end setLanguageStandard;

function getLanguageStandard
  output String outVersion;
external "builtin";
annotation(preferredView="text");
end getLanguageStandard;

function getAstAsCorbaString "Print the whole AST on the CORBA format for records, e.g.
  record Absyn.PROGRAM
    classes = ...,
    within_ = ...,
    globalBuildTimes = ...
  end Absyn.PROGRAM;"
  input String fileName := "<interactive>";
  output String result "returns the string if fileName is interactive; else it returns ok or error depending on if writing the file succeeded";
external "builtin";
annotation(preferredView="text");
end getAstAsCorbaString;

function cd "change directory to the given path (which may be either relative or absolute)
  returns the new working directory on success or a message on failure
  if the given path is the empty string, the function simply returns the current working directory
  "
  input String newWorkingDirectory := "";
  output String workingDirectory;
external "builtin";
annotation(preferredView="text");
end cd;

function checkModel
  input TypeName className;
  output String result;
external "builtin";
annotation(preferredView="text");
end checkModel;

function checkAllModelsRecursive
  input TypeName className;
  output String result;
external "builtin";
annotation(preferredView="text");
end checkAllModelsRecursive;

function typeOf
  input VariableName variableName;
  output String result;
external "builtin";
annotation(preferredView="text");
end typeOf;

function instantiateModel
  input TypeName className;
  output String result;
external "builtin";
annotation(preferredView="text");
end instantiateModel;

function generateCode "The input is a function name for which C-code is generated and compiled into a dll/so"
  input TypeName className;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end generateCode;

function loadModel "Loads a Modelica library"
  input TypeName className;
  input String[:] priorityVersion := {"default"};
  output Boolean success;
external "builtin";
annotation(Documentation(info="<html>
Loads a Modelica library.
<h4>Syntax</h4>
<blockquote>
<pre><b>loadModel</b>(Modelica)</pre>
<pre><b>loadModel</b>(Modelica,{\"3.2\"})</pre>
</blockquote>
<h4>Description</h4>
<p>loadModel() begins by parsing the getModelicaPath(), and looking for candidate packages to load in the given paths (separated by : or ; depending on OS).</p>
<p>The candidate is selected by choosing the one with the highest priority, chosen by looking through the <i>priorityVersion</i> argument to the function.
If the version searched for is \"default\", the following special priority is used: no version name > highest main release > highest pre-release > lexical sort of others (see table below for examples).
If none of the searched versions exist, false is returned and an error is added to the buffer.</p>
<p>A top-level package may either be defined in a file (\"Modelica 3.2.mo\") or directory (\"Modelica 3.2/package.mo\")</p>

<table summary=\"Modelica version numbering\">
<tr><th>Priority</th><th>Example</th></tr>
<tr><td>No version name</td><td>Modelica</td></tr>
<tr><td>Main release</td><td>Modelica 3.3</td></tr>
<tr><td>Pre-release</td><td>Modelica 3.3 Beta 1</td></tr>
<tr><td>Non-ordered</td><td>Modelica Trunk</td></tr>
</table>

<h4>Bugs</h4>
<p>If loadModel(Modelica.XXX) is called, loadModel(Modelica) is executed instead, loading the complete library.</p>
<p>There is a special exception that prefers Modelica 3.1 over any other MSL version since this is the preferred version for OpenModelica.</p>
</html>"),
preferredView="text");
end loadModel;

function deleteFile "Deletes a file with the given name"
  input String fileName;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end deleteFile;

function saveModel
  input String fileName;
  input TypeName className;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end saveModel;

function saveTotalModel
  input String fileName;
  input TypeName className;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end saveTotalModel;

function save
  input TypeName className;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end save;

function saveTotalSCode
  input String fileName;
  input TypeName className;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end saveTotalSCode;

function translateGraphics
  input TypeName className;
  output String result;
external "builtin";
annotation(preferredView="text");
end translateGraphics;

function codeToString
  input Code className;
  output String string;
external "builtin";
annotation(preferredView="text");
end codeToString;

function dumpXMLDAE
  input TypeName className;
  input String translationLevel := "flat";
  input Boolean addOriginalIncidenceMatrix := false;
  input Boolean addSolvingInfo := false;
  input Boolean addMathMLCode := false;
  input Boolean dumpResiduals := false;
  input String fileNamePrefix := "<default>" "this is the className in string form by default";
  input Boolean storeInTemp := false;
  output String result[2] "Contents, Message/Filename; why is this an array and not 2 output arguments?";
external "builtin";
annotation(preferredView="text");
end dumpXMLDAE;

function listVariables "Lists the names of the active variables in the scripting environment."
  output TypeName variables[:];
external "builtin";
annotation(preferredView="text");
end listVariables;

function strtok "Splits the strings at the places given by the token, for example:
  strtok(\"abcbdef\",\"b\") => {\"a\",\"c\",\"def\"}"
  input String string;
  input String token;
  output String[:] strings;
external "builtin";
annotation(preferredView="text");
end strtok;

public function stringReplace
  input String str;
  input String source;
  input String target;
  output String res;
external "builtin";
annotation(preferredView="text");
end stringReplace;

function list "Lists the contents of the given class, or all loaded classes"
  input TypeName class_ := $TypeName(AllLoadedClasses);
  input Boolean interfaceOnly := false;
  input Boolean shortOnly := false "only short class definitions";
  output String contents;
external "builtin";
annotation(Documentation(info="<html>
Pretty-prints a class definition.
<h4>Syntax</h4>
<blockquote>
<pre><b>list</b>(Modelica.Math.sin)</pre>
<pre><b>list</b>(Modelica.Math.sin,interfaceOnly=true)</pre>
</blockquote>
<h4>Description</h4>
<p>list() pretty-prints the whole of the loaded AST while list(className) lists a class and its children.
It keeps all annotations and comments intact but strips out any comments and normalizes white-space.</p>
<p>list(className,interfaceOnly=true) works on functions and pretty-prints only the interface parts
(annotations and protected sections removed). String-comments on public variables are kept.</p>
<p>If the specified class does not exist (or is not a function when interfaceOnly is given), the
empty string is returned.</p>
</html>",revisions="<html>
<table>
<tr><th>Revision</th><th>Author</th><th>Comment</th></tr>
<tr><td>10796</td><td>sjoelund.se</td><td>Added shortOnly option</td></tr>
<tr><td>10756</td><td>sjoelund.se</td><td>Added interfaceOnly option</td></tr>
</table>
</html>"),
  preferredView="text");
end list;

function uriToFilename "Handles modelica:// and file:// URI's. The result is an absolute path on the local system.
  The result depends on the current MODELICAPATH. Returns the empty string on failure."
  input String uri;
  output String filename;
external "builtin";
annotation(preferredView="text");
end uriToFilename;

type LinearSystemSolver = enumeration(dgesv,lpsolve55);
function solveLinearSystem
  "Solve A*X = B, using dgesv or lp_solve (if any variable in X is integer)
  Returns for solver dgesv: info>0: Singular for element i. info<0: Bad input.
  For solver lp_solve: ???"
  input Real[size(B,1),size(B,1)] A;
  input Real[:] B;
  input LinearSystemSolver solver := LinearSystemSolver.dgesv;
  input Integer[:] isInt := {-1} "list of indices that are integers";
  output Real[size(B,1)] X;
  output Integer info;
external "builtin";
annotation(preferredView="text");
end solveLinearSystem;

type StandardStream = enumeration(stdin,stdout,stderr);
function reopenStandardStream
  input StandardStream _stream;
  input String filename;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end reopenStandardStream;

function importFMU "Imports the Functional Mockup Unit
  Example command:
  importFMU(\"A.fmu\");"
  input String filename "the fmu file name";
  input String workdir := "./" "The output directory for imported FMU files. <default> will put the files to current working directory.";
  output Boolean success "Returns true on success";
protected
  String omhome,exe,call;
algorithm
  // get OPENMODELICAHOME
  omhome := getInstallationDirectoryPath();
  // create the path till fmigenerator
  exe := omhome + "/bin/fmigenerator";
  // create the list of arguments for fmigenerator
  call := exe + " " + "--fmufile=\"" + filename + "\" --outputdir=\"" + workdir + "\"";
  success := 0 == system(call);
annotation(preferredView="text");
end importFMU;

function getSourceFile
  input TypeName class_;
  output String filename "empty on failure";
external "builtin";
annotation(preferredView="text");
end getSourceFile;

function setSourceFile
  input TypeName class_;
  input String filename;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setSourceFile;

function setClassComment
  input TypeName class_;
  input String filename;
  output Boolean success;
external "builtin";
annotation(preferredView="text");
end setClassComment;

function getClassNames
  input TypeName class_ := $TypeName(AllLoadedClasses);
  input Boolean recursive := false;
  input Boolean qualified := false;
  input Boolean sort := false;
  input Boolean builtin := false "List also builtin classes if true";
  output TypeName classNames[:]; 
external "builtin";
annotation(preferredView="text");
end getClassNames;

function getPackages
  input TypeName class_ := $TypeName(AllLoadedClasses);
  output TypeName classNames[:]; 
external "builtin";
annotation(preferredView="text");
end getPackages;

partial function basePlotFunction "Extending this does not seem to work at the moment. A real shame; functions below are copy-paste and all need to be updated if the interface changes."
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String interpolation := "linear" "
    Determines if the simulation data should be interpolated to allow drawing of continuous lines in the diagram.
    \"linear\" results in linear interpolation between data points, \"constant\" keeps the value of the last known
    data point until a new one is found and \"none\" results in a diagram where only known data points are plotted."
  ;
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Boolean points := false "Determines whether or not the data points should be indicated by a dot in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
annotation(preferredView="text");
end basePlotFunction;

function plot "Launches a plot window using OMPlotWindow. Returns true on success.
  If OpenModelica was compiled without sendData support, this function will return false.
  
  Example command sequences:
  simulate(A);plot({x,y,z});
  simulate(A);plot(x);
  simulate(A,fileNamePrefix=\"B\");simulate(C);plot(z,\"B.mat\",legend=false);
  "
  input VariableNames vars "The variables you want to plot";
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String interpolation := "linear" "
    Determines if the simulation data should be interpolated to allow drawing of continuous lines in the diagram.
    \"linear\" results in linear interpolation between data points, \"constant\" keeps the value of the last known
    data point until a new one is found and \"none\" results in a diagram where only known data points are plotted."
  ;
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Boolean points := false "Determines whether or not the data points should be indicated by a dot in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plot;

function plot3 "Launches a plot window using OMPlot. Returns true on success.
  Don't require sendData support.
  
  Example command sequences:
  simulate(A);plot({x,y,z});
  simulate(A);plot(x, externalWindow=true);
  simulate(A,fileNamePrefix=\"B\");simulate(C);plot(z,\"B.mat\",legend=false);
  "
  input VariableNames vars "The variables you want to plot";
  input Boolean externalWindow := false "Opens the plot in a new plot window";
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plot3;

function plotAll "Works in the same way as plot(), but does not accept any
  variable names as input. Instead, all variables are part of the plot window.
  
  Example command sequences:
  simulate(A);plotAll();
  simulate(A,fileNamePrefix=\"B\");simulate(C);plotAll(x,\"B.mat\");
  "
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String interpolation := "linear" "
    Determines if the simulation data should be interpolated to allow drawing of continuous lines in the diagram.
    \"linear\" results in linear interpolation between data points, \"constant\" keeps the value of the last known
    data point until a new one is found and \"none\" results in a diagram where only known data points are plotted."
  ;
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Boolean points := false "Determines whether or not the data points should be indicated by a dot in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plotAll;

function plotAll3 "Works in the same way as plot(), but does not accept any
  variable names as input. Instead, all variables are part of the plot window.
  
  Example command sequences:
  simulate(A);plotAll();
  simulate(A);plotAll(externalWindow=true);
  simulate(A,fileNamePrefix=\"B\");simulate(C);plotAll(x,\"B.mat\");"
  
  input Boolean externalWindow := false "Opens the plot in a new plot window";
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plotAll3;

function plot2 "Uses the Java-based plot window (ptplot.jar) to launch a plot,
  similar to the plot() command. This command accepts fewer options, but works
  even when OpenModelica was not compiled with sendData support.
  
  Example command sequences:
  simulate(A);plot2({x,y});
  simulate(A,fileNamePrefix=\"B\");simulate(C);plot2(x,\"B.mat\");
  "
  input VariableNames vars;
  input String fileName := "<default>";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plot2;

function visualize "Uses the 3D visualization package, SimpleVisual.mo, to
  visualize the model. See chapter 3.4 (3D Animation) of the OpenModelica
  System Documentation for more details.
  
  Example command sequence:
  simulate(A,outputFormat=\"plt\");visualize(A);
  "
  input TypeName classToVisualize;
  output Boolean success "Returns true on success";
annotation(preferredView="text");
end visualize;

function visualize2 "Uses the 3D visualization package, SimpleVisual.mo, to
  visualize the model. See chapter 3.4 (3D Animation) of the OpenModelica
  System Documentation for more details.
  Writes the visulizations objects into the file \"model_name.visualize\"
  Don't require sendData support.
  
  Example command sequence:
  simulate(A,outputFormat=\"mat\");visualize2(A);visualize2(A,\"B.mat\");visualize2(A,\"B.mat\", true);
  "
  input TypeName className;
  input Boolean externalWindow := false "Opens the visualize in a new window";
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  output Boolean success "Returns true on success";
  external "builtin";
annotation(preferredView="text");
end visualize2;

function plotParametric "Plots the y-variables as a function of the x-variable.

  Example command sequences:
  simulate(A);plotParametric(x,y);
  simulate(A,fileNamePrefix=\"B\");simulate(C);plotParametric(x,{y1,y2,y3},fileName=\"B.mat\",yLabel=\"[V]\");
  "
  input VariableName xVariable;
  input VariableNames yVariables;
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String interpolation := "linear" "
    Determines if the simulation data should be interpolated to allow drawing of continuous lines in the diagram.
    \"linear\" results in linear interpolation between data points, \"constant\" keeps the value of the last known
    data point until a new one is found and \"none\" results in a diagram where only known data points are plotted."
  ;
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Boolean points := false "Determines whether or not the data points should be indicated by a dot in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plotParametric;

function plotParametric2 "Plots the y-variables as a function of the x-variable.

  Example command sequences:
  simulate(A);plotParametric2(x,y);
  simulate(A,fileNamePrefix=\"B\");simulate(C);plotParametric2(x,{y1,y2,y3},\"B.mat\");
  "
  input VariableName xVariable;
  input VariableNames yVariables;
  input String fileName := "<default>";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plotParametric2;

function plotParametric3 "Launches a plotParametric window using OMPlot. Returns true on success.
  Don't require sendData support.
  
  Example command sequences:
  simulate(A);plotParametric2(x,y);
  simulate(A);plotParametric2(x,y, externalWindow=true);
  "
  input VariableName xVariable;
  input VariableName yVariable;
  input Boolean externalWindow := false "Opens the plot in a new plot window";
  input String fileName := "<default>" "The filename containing the variables. <default> will read the last simulation result";
  input String title := "Plot by OpenModelica" "This text will be used as the diagram title.";
  input Boolean legend := true "Determines whether or not the variable legend is shown.";
  input Boolean grid := true "Determines whether or not a grid is shown in the diagram.";
  input Boolean logX := false "Determines whether or not the horizontal axis is logarithmically scaled.";
  input Boolean logY := false "Determines whether or not the vertical axis is logarithmically scaled.";
  input String xLabel := "time" "This text will be used as the horizontal label in the diagram.";
  input String yLabel := "" "This text will be used as the vertical label in the diagram.";
  input Real xRange[2] := {0.0,0.0} "Determines the horizontal interval that is visible in the diagram. {0,0} will select a suitable range.";
  input Real yRange[2] := {0.0,0.0} "Determines the vertical interval that is visible in the diagram. {0,0} will select a suitable range.";
  output Boolean success "Returns true on success";
external "builtin";
annotation(preferredView="text");
end plotParametric3;

function readSimulationResult "Reads a result file, returning a matrix corresponding to the variables and size given."
  input String filename;
  input VariableNames variables;
  input Integer size := 0 "0=read any size... If the size is not the same as the result-file, this function fails";
  output Real result[:,:];
external "builtin";
annotation(preferredView="text");
end readSimulationResult;

function readSimulationResultSize "The number of intervals that are present in the output file"
  input String fileName;
  output Integer sz;
external "builtin";
annotation(preferredView="text");
end readSimulationResultSize;

function readSimulationResultVars "Returns the variables in the simulation file; you can use val() and plot() commands using these names"
  input String fileName;
  output String[:] vars;
external "builtin";
annotation(preferredView="text");
end readSimulationResultVars;

public function compareSimulationResults "compare simulation results"
  input String filename;
  input String reffilename;
  input String logfilename;
  input Real refTol;
  input Real absTol;
  input String[:] vars;
  output String result;
external "builtin";
annotation(preferredView="text");
end compareSimulationResults;

function val "Works on the filename pointed to by the scripting variable currentSimulationResult.
  The result is the value of the variable at a certain time point.
  For parameters, any time may be given. For variables the startTime<=time<=stopTime needs to hold.
  On error, nan (Not a Number) is returned and the error buffer contains the message."
  input VariableName var;
  input Real time;
  output Real valAtTime;
external "builtin";
annotation(preferredView="text");
end val;

function getAlgorithmCount "Counts the number of Algorithm sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getAlgorithmCount;

function getNthAlgorithm "Returns the Nth Algorithm section"
  input TypeName class_;
  input Integer index;
  output String result;
external "builtin";
annotation(preferredView="text");
end getNthAlgorithm;

function getInitialAlgorithmCount "Counts the number of Initial Algorithm sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getInitialAlgorithmCount;

function getNthInitialAlgorithm "Returns the Nth Initial Algorithm section"
  input TypeName class_;
  input Integer index;
  output String result;
external "builtin";
annotation(preferredView="text");
end getNthInitialAlgorithm;

function getEquationCount "Counts the number of Equation sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getEquationCount;

function getNthEquation "Returns the Nth Equation section"
  input TypeName class_;
  input Integer index;
  output String result;
external "builtin";
annotation(preferredView="text");
end getNthEquation;

function getInitialEquationCount "Counts the number of Initial Equation sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getInitialEquationCount;

function getNthInitialEquation "Returns the Nth Initial Equation section"
  input TypeName class_;
  input Integer index;
  output String result;
external "builtin";
annotation(preferredView="text");
end getNthInitialEquation;

function getAnnotationCount "Counts the number of Annotation sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getAnnotationCount;

function getNthAnnotationString "Returns the Nth Annotation section as string"
  input TypeName class_;
  input Integer index;
  output String result;
external "builtin";
annotation(preferredView="text");
end getNthAnnotationString;

function getImportCount "Counts the number of Import sections in a class"
  input TypeName class_;
  output Integer count;
external "builtin";
annotation(preferredView="text");
end getImportCount;

function getNthImport "Returns the Nth Import as string"
  input TypeName class_;
  input Integer index;
  output String out[3] "{\"Path\",\"Id\",\"Kind\"}";
external "builtin";
annotation(preferredView="text");
end getNthImport;

function iconv "The iconv() function converts one multibyte characters from one character
  set to another.
  See man (3) iconv for more information.
"
  input String string;
  input String from;
  input String to := "UTF-8";
  output String result;
external "builtin";
annotation(preferredView="text");
end iconv;

function getDocumentationAnnotation "
  TODO: Should be changed to have 2 outputs instead of an array of 2 Strings...
"
  input TypeName cl;
  output String out[2] "{info,revision}";
external "builtin";
annotation(preferredView="text");
end getDocumentationAnnotation;

function typeNameString
  input TypeName cl;
  output String out;
external "builtin";
annotation(preferredView="text");
end typeNameString;

function typeNameStrings
  input TypeName cl;
  output String out[:];
external "builtin";
annotation(preferredView="text");
end typeNameStrings;

function getClassComment
  input TypeName cl;
  output String comment;
external "builtin";
annotation(preferredView="text");
end getClassComment;

function dirname
  input String path;
  output String dirname;
external "builtin";
annotation(
  Documentation(info="<html>
  Returns the directory name of a file path.
  Similar to <a href=\"http://linux.die.net/man/3/dirname\">dirname(3)</a>, but with the safety of Modelica strings.
</html>"),
  preferredView="text");
end dirname;

function basename
  input String path;
  output String basename;
external "builtin";
annotation(
  Documentation(info="<html>
  Returns the base name (file part) of a file path.
  Similar to <a href=\"http://linux.die.net/man/3/basename\">basename(3)</a>, but with the safety of Modelica strings.
</html>"),
  preferredView="text");
end basename;

annotation(preferredView="text");
end Scripting;

package UsersGuide
package ReleaseNotes
package '1.0' "Version 1.0 (r1026, 2003-10-31)"
end '1.0';
package '1.1' "Version 1.1 (r1323, 2004-10-25)"
end '1.1';
package '1.2' "Version 1.2 (r1562, 2005-03-04)"
end '1.2';
package '1.3.1' "Version 1.3.1 (r1999, 2005-12-01)"
annotation(Documentation(info="<html>
This release has several important highlights.
This is also the <em>first</em> release for which the New BSD (Berkeley) open-source license applies to the source code, including the whole compiler and run-time system. This makes is possible to use OpenModelica for both academic and commercial purposes without restrictions.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes a significantly improved OpenModelica Compiler (OMC):
<ul>
<li>Support for hybrid and discrete-event simulation (if-equations, if-expressions, when-equations;    not yet if-statements and when-statements).</li>
<li>Parsing of full Modelica 2.2</li>
<li>Improved support for external functions.</li>
<li>Vectorization of function arguments; each-modifiers, better implementation of replaceable, better handling of structural parameters, better support for vector and array operations, and many other improvements.</li>
<li>Flattening of the Modelica Block library version 1.5 (except a few models), and simulation of most of these.</li>
<li>Automatic index reduction (present also in previous release).</li>
<li>Updated User's Guide including examples of hybrid simulation and external functions.</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
An improved window-based interactive command shell, now including command completion and better editing and font size support. 
<h4>OpenModelica Notebook (OMNotebook)</h4>
A free implementation of an OpenModelica notebook (OMNOtebook), for electronic books with course material, including the DrModelica interactive course material. It is possible to simulate and plot from this notebook.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
An early alpha version of the first Eclipse plug-in (called MDT for Modelica Development Tooling) for Modelica Development. This version gives compilation support and partial support for browsing Modelica package hierarchies and classes.
<h4>OpenModelica Development Environment (OMDev)</h4>
The following mechanisms have been put in place to support OpenModelica development.
<ul>
<li>Bugzilla support for OpenModelica bug tracking, accessible to anybody.</li>
<li>A system for automatic regression testing of the compiler and simulator, (+ other system parts) usually run at check in time.</li>
<li>Version handling is done using SVN, which is better than the previously used CVS system. For example, name change of modules is now possible within the version handling system.</li>
</ul>
</html>"));
end '1.3.1';
package '1.4.0' "Version 1.4.0 (r2393, 2006-05-18)"
annotation(Documentation(info="<html>
This release has a number of improvements described below. The most significant change is probably that OMC has now been translated to an extended subset of Modelica (MetaModelica), and that all development of the compiler is now done in this version..
<h4>OpenModelica Compiler (OMC)</h4>
This release includes further improvements of the OpenModelica Compiler (OMC):
<ul>
<li>Partial support for mixed system of equations.</li>
<li>New initialization routine, based on optimization (minimizing residuals of initial equations).</li>
<li>Symbolic simplification of builtin operators for vectors and matrices.</li>
<li>Improved code generation in simulation code to support e.g. Modelica functions.</li>
<li>Support for classes extending basic types, e.g. connectors (support for MSL 2.2 block connectors).</li>
<li>Support for parametric plotting via the plotParametric command.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
Essentially the same OMShell as in 1.3.1. One difference is that now all error messages are sent to the command window instead of to a separate log window.
<h4>OpenModelica Notebook (OMNotebook)</h4>
Many significant improvements and bug fixes. This version supports graphic plots within the cells in the notebook. Improved cell handling and Modelica code syntax highlighting. Command completion of the most common OMC commands is now supported. The notebook has been used in several courses.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
This is the first really useful version of MDT. Full browsing of Modelica code, e.g. the MSL 2.2, is now supported. (MetaModelica browsing is not yet fully supported). Full support for automatic indentation of Modelica code, including the MetaModelica extensions. Many bug fixes. The Eclipse plug-in is now in use for OpenModelica development at PELAB and MathCore Engineering AB since approximately one month.
<h4>OpenModelica Development Environment (OMDev)</h4>
The following mechanisms have been put in place to support OpenModelica development.
<ul>
<li>A separate web page for OMDev  (OpenModelica Development Environment).</li>
<li>A pre-packaged OMDev zip-file with precompiled binaries for development under Windows using the mingw Gnu compiler from the Eclipse MDT plug-in. (Development is also possible using Visual Studio).</li>
<li>All source code of the OpenModelica compiler has recently been translated to an extended subset of Modelica, currently called MetaModelica. The current size of OMC is approximately 100 000 lines All development is now done in this version.</li>
<li>A new tutorial and users guide for development in MetaModelica.</li>
<li>Successful builds and tests of OMC under Linux and Solaris.</li>
</ul>
</html>"));
end '1.4.0';
package '1.4.1' "Version 1.4.1 (r2432, 2006-06-19)"
annotation(Documentation(info="<html>
This release has only improvements and bug fixes of the OMC compiler, the MDT plugin and the OMDev components. The OMShell and OMNotebook are the same.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes further improvements of the OpenModelica Compiler (OMC):
<ul>
<li>Support for external objects.</li>
<li>OMC now reports the version number (via command line switches or CORBA API getVersion()).</li>
<li>Implemented caching for faster instantiation of large models.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Improvements of the error reporting when building the OMC compiler. The errors are now added to the problems view. The latest MDT release is version 0.6.6 (2006-06-06).
<h4>OpenModelica Development Environment (OMDev)</h4>
Small fixes in the MetaModelica compiler. MetaModelica Users Guide is now part of the OMDev release. The latest OMDev was release in 2006-06-06.
</html>"));
end '1.4.1';
package '1.4.2' "Version 1.4.2 (r2557, 2006-10-01)"
annotation(Documentation(info="<html>
This release has improvements and bug fixes of the OMC compiler, OMNotebook, the MDT plugin and the OMDev. OMShell is the same as previously.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes further improvements of the OpenModelica Compiler (OMC):
<ul>
<li>Improved initialization and index reduction.</li>
<li>Support for integer arrays is now largely implemented.</li>
<li>The val(variable,time) scripting function for accessing the value of a simulation result variable at a certain point in the simulated time.</li>
<li>Interactive evalution of for-loops, while-loops, if-statements, if-expressions, in the interactive scripting mode.</li>
<li>Improved documentation and examples of calling the Model Query and Manipulation API.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
Search and replace functions have been added. The DrModelica tutorial (all files) has been updated, obsolete sections removed, and models which are not supported by the current implementation marked clearly. Automatic recognition of the .onb suffix (e.g. when double-clicking) in Windows makes it even more convenient to use.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Two major improvements are added in this release:
<ul>
<li>Browsing and code completion works both for standard Modelica and for MetaModelica.</li>
<li>The debugger for algorithmic code is now available and operational in Eclipse for debugging of MetaModelica programs.</li>
</ul>
<h4>OpenModelica Development Environment (OMDev)</h4>
Mostly the same as previously.
</html>"));
end '1.4.2';
package '1.4.3' "Version 1.4.3 (r2860, 2007-07-13)"
annotation(Documentation(info="<html>
This release has  a number of significant improvements of the OMC compiler, OMNotebook, the MDT plugin and the OMDev. Increased platform availability now also for Linux and Macintosh, in addition to Windows. OMShell is the same as previously, but now ported to Linux and Mac.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes a number of  improvements of the OpenModelica Compiler (OMC):
<ul>
<li>Significantly increased compilation speed, especially with large models and many packages.</li>
<li>Now available also for Linux and Macintosh platforms.</li>
<li>Support for when-equations in algorithm sections, including elsewhen.</li> 
<li>Support for inner/outer prefixes of components (but without type error checking).</li>
<li>Improved solution of nonlinear systems.</li>
<li>Added ability to compile generated simulation code using Visual Studio compiler.</li>
<li>Added smart setting of fixed attribute to false. If initial equations, OMC instead has fixed=true as default for states due to allowing overdetermined initial equation systems.</li>
<li>Better state select heuristics.</li>
<li>New function getIncidenceMatrix(ClassName) for dumping the incidence matrix.</li>
<li>Builtin functions String(), product(), ndims(), implemented.</li>
<li>Support for terminate() and assert() in equations.</li>
<li>In emitted flat form: protected variables are now prefixed with protected when printing flat class.</li>
<li>Some support for  tables, using omcTableTimeIni instead of dymTableTimeIni2.</li>
<li>Better support for empty arrays, and support for matrix operations like  a*[1,2;3,4].</li>
<li>Improved val() function can now evaluate array elements and record fields, e.g. val(x[n]), val(x.y) .</li>
<li>Support for reinit in algorithm sections.</li>
<li>String support in external functions.</li>
<li>Double precision floating point precision now also for interpreted expressions</li>
<li>Better simulation error messages.</li>
<li>Support for der(expressions).</li>
<li>Support for iterator expressions such as {3*i for i in 1..10}.</li>
<li>More test cases in the test suite.</li>
<li>A number of bug fixes, including sample and event handling bugs.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
A number of improvements, primarily in the platform availability.
<ul>
<li>Available on the Linux and Macintosh platforms, in addition to Windows.</li>
<li>Fixed cell copying bugs, plotting of derivatives now works, etc.</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
Now available also on the Macintosh platform.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
This release includes major improvements of MDT and the associated MetaModelica debugger:
<ul>
<li>Greatly improved browsing and code completion works both for standard Modelica and for MetaModelica.</li>
<li>Hovering over identifiers displays type information.</li>
<li>A new and greatly improved implementation of the debugger for MetaModelica algorithmic code, operational in Eclipse. Greatly improved performance - only approx 10% speed reduction even for 100 000 line programs. Greatly improved single stepping, step over, data structure browsing, etc.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Development Environment (OMDev)</h4>
<ul>
<li>Increased compilation speed for MetaModelica.</li>
<li>Better if-expression support in MetaModelica.</li>
</ul>
</html>"));
end '1.4.3';
package '1.4.4' "Version 1.4.4 (r3218, 2008-02-20)"
annotation(Documentation(info="<html>
This release is primarily a bug fix release, except for a preliminary version of new plotting functionality available both from the OMNotebook and separately through a Modelica API. This is also the first release under the open source license OSMC-PL (Open Source Modelica Consortium Public License), with support from the recently created Open Source Modelica Consortium. An integrated version handler, bug-, and issue tracker has also been added.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes small improvements and some bugfixes of the OpenModelica Compiler (OMC):
<ul>
<li>Better support for if-equations, also inside when.</li>
<li>Better support for calling functions in parameter expressions and interactively through dynamic loading of functions.</li>
<li>Less memory consumtion during compilation and interactive evaluation.</li<
<li>A number of bug-fixes.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
Test release of improvements, primarily in the plotting functionality and platform availability.
<ul>
<li>Preliminary version of improvements in the plotting functionality: scalable plots, zooming, logarithmic plots, grids, etc., currently available in a preliminary version through the plot2 function.</li>
<li>Programmable plotting accessible through a Modelica API.</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
Same as previously.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
This release includes minor bugfixes of MDT and the associated MetaModelica debugger.
<h4>OpenModelica Development Environment (OMDev)</h4>
Extended test suite with a better structure. Version handling, bug tracking, issue tracking, etc. now available under the integrated Codebeamer.
</html>"));
end '1.4.4';
package '1.4.5' "Version 1.4.5 (r3856, 2009-02-10)"
annotation(Documentation(info="<html>
This release has several improvements, especially platform availability, less compiler memory usage, and supporting more aspects of  Modelica 3.0.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes small improvements and some bugfixes of the OpenModelica Compiler (OMC):
<ul>
<li>Less memory consumption and better memory management over time. This also includes a better API supporting automatic memory management when calling C functions from within the compiler.</li>
<li>Modelica 3.0 parsing support.</li>
<li>Export of DAE to XML and MATLAB.</li>
<li>Support for several platforms Linux, MacOS, Windows (2000, Xp, Vista).</li>
<li>Support for record and strings as function arguments.</li>
<li>Many bug fixes.</li>
<li>(Not part of OMC): Additional free graphic editor SimForge can be used with OpenModelica.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
A number of improvements, primarily in the plotting functionality and platform availability.
<ul>
<li>A number of improvements in the plotting functionality: scalable plots, zooming, logarithmic plots, grids, etc.</li>
<li>Programmable plotting accessible through a Modelica API.</li>
<li>Simple 3D visualization.</li>
<li<Support for several platforms Linux, MacOS, Windows (2000, Xp, Vista).</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
Same as previously.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Minor bug fixes.
<h4>OpenModelica Development Environment (OMDev)</h4> 
Same as previously.
</html>"));
end '1.4.5';
package '1.5.0' "Version 1.5.0 (r5856, 2010-07-13)"
annotation(Documentation(info="<html>
This OpenModelica 1.5 release has major improvements in the OpenModelica compiler frontend and some in the backend. A major improvement of this release is full flattening support for the MultiBody library as well as limited simulation support for MultiBody. Interesting new facilities are the interactive simulation and the integrated UML-Modelica modeling with ModelicaML. Approximately 4 person-years of additional effort have been invested in the compiler compared to the 1.4.5 version, e.g., in order to have a more complete coverage of Modelica 3.0, mainly focusing on improved flattening in the compiler frontend.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes major improvements of the flattening frontend part of the OpenModelica Compiler (OMC) and some improvements of the backend, including, but not restricted to:
<ul>
<li>Improved flattening speed of at least a factor of 10 or more compared to the 1.4.5 release, primarily for larger models with inner-outer, but also speedup for other models, e.g. the robot model flattens in approximately 2 seconds.</li>
<li>Flattening of all MultiBody models, including all elementary models, breaking connection graphs, world object, etc. Moreover, simulation is now possible for at least five MultiBody models: Pendulum, DoublePendulum, InitSpringConstant, World, PointGravity­WithPointMasses.</li> 
<li>Progress in supporting the Media library, but simulation is not yet possible.</li>
<li>Support for enumerations, both in the frontend and the backend.</li>
<li>Support for expandable connectors.</li>
<li>Support for the inline and late inline annotations in functions.</li>
<li>Complete support for record constructors, also for records containing other records.</li>
<li>Full support for iterators, including nested ones.</li>
<li>Support for inferred iterator and for-loop ranges.</li>
<li>Support for the function derivative annotation.</li>
<li>Prototype of interactive simulation.</li>
<li>Prototype of integrated UML-Modelica modeling and simulation with ModelicaML.</li>
<li>A new bidirectional external Java interface for calling external Java functions, or for calling Modelica functions from Java.</li>
<li>Complete implementation of replaceable model extends.</li>
<li>Fixed problems involving arrays of unknown dimensions.</li>
<li>Limited support for tearing.</li>
<li>Improved error handling at division by zero.</li>
<li>Support for Modelica 3.1 annotations.</li>
<li>Support for all MetaModelica language constructs inside OpenModelica.</li>
<li>OpenModelica works also under 64-bit Linux and Mac 64-bit OSX.</li>
<li>Parallel builds and running test suites in parallel on multi-core platforms.</li>
<li>New OpenModelica text template language for easier implementation of code generators, XML generators, etc.</li>
<li>New OpenModelica code generators to C and C# using the text template language.</li>
<li>Faster simulation result data file output optionally as comma-separated values.</li>
<li>Many bug fixes.</li>
</ul>
It is now possible to graphically edit models using parts from the Modelica Standard Library 3.1, since the simForge graphical editor (from Politecnico di Milano) that is used together with OpenModelica has been updated to version 0.9.0 with a important new functionality, including support for Modelica 3.1 and 3.0 annotations. The 1.6 and 2.2.1 Modelica graphical annotation versions are still supported.
<h4>OpenModelica Notebook (OMNotebook)</h4>
Improvements in platform availability.
<ul>
<li>Support for 64-bit Linux.</li>
<li>Support for Windows 7.</li>
<li>Better support for MacOS, including 64-bit OSX.</li>
</ul>
<h4>OpenModelica Shell (OMShell)</h4>
Same as previously.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Minor bug fixes.
<h4>OpenModelica Development Environment (OMDev)</h4> 
Minor bug fixes.
</html>"));
end '1.5.0';
package '1.6.0' "Version 1.6.0 (r7524, 2010-12-21)"
annotation(Documentation(info="<html>
The OpenModelica 1.6 release primarily contains flattening, simulation, and performance improvements regarding Modelica Standard Library 3.1 support, but also has an interesting new tool - the OMEdit graphic connection editor, and a new educational material called DrControl, and an improved ModelicaML UML/Modelica profile with better support for modeling and requirement handling.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes bug fix and performance improvemetns of the flattening frontend part of the OpenModelica Compiler (OMC) and some improvements of the backend, including, but not restricted to:
<ul>
<li>Flattening of the whole Modelica Standard Library 3.1 (MSL 3.1), except Media and Fluid.</li>
<li>Improved flattening speed of a factor of 5-20 compared to OpenModelica 1.5 for a number of models, especially in the MultiBody library.</li>
<li>Reduced memory consumption by the OpenModelica compiler frontend, for certain large models a reduction of a factor 50.</li>
<li>Reorganized, more modular OpenModelica compiler backend, can now handle approximately 30 000 equations, compared to previously approximately 10 000 equations.</li>
<li>Better error messages from the compiler, especially regarding functions.</li>
<li>Improved simulation coverage of MSL 3.1. Many models that did not simulate before are now simulating. However, there are still many models in certain sublibraries that do not simulate.</li>
<li>Progress in supporting the Media library, but simulation is not yet possible.</li>
<li>Improved support for enumerations, both in the frontend and the backend.</li>
<li>Implementation of stream connectors.</li>
<li>Support for linearization through symbolic Jacobians.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
A new DrControl electronic notebook for teaching control and modeling with Modelica.
<h4>OpenModelica Shell (OMShell)</h4>
Same as previously.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Same as previously.
<h4>OpenModelica Development Environment (OMDev)</h4> 
Several enhancements. Support for match-expressions in addition to matchcontinue. Support for real if-then-else. Support for if-then without else-branches. Modelica Development Tooling 0.7.7 with small improvements such as more settings, improved error detection in console, etc.
<h4>New Graphic Editor OMEdit</h4>
A new improved open source graphic model connection editor called OMEdit, supporting 3.1 graphical annotations, which makes it possible to move models back and forth to other tools without problems. The editor has been implemented by students at Linköping University and is based on the C++ Qt library.
</html>"));
end '1.6.0';
package '1.7.0' "Version 1.7.0 (r8711, 2011-04-20)"
annotation(Documentation(info="<html>
The OpenModelica 1.7 release contains OMC flattening improvements for the Media library, better and faster event handling and simulation, and fast MetaModelica support in the compiler, enabling it to compiler itself. This release also includes two interesting new tools - the OMOpttim optimization subsystem, and a new performance profiler for equation-based Modelica models.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes bug fixes and performance improvements of the flattening frontend part of the OpenModelica Compiler (OMC) and several improvements of the backend, including, but not restricted to:
<ul>
<li>Flattening of the whole Modelica Standard Library 3.1 (MSL 3.1), except Media and Fluid.</li>
<li>Progress in supporting the Media library, some models now flatten.</li>
<li>Much faster simulation of many models through more efficient handling of alias variables, binary output format, and faster event handling.</li>
<li>Faster and more stable simulation through new improved event handling, which is now default.</li>
<li>Simulation result storage in binary .mat files, and plotting from such files.</li>
<li>Support for Unicode characters in quoted Modelica identifiers, including Japanese and Chinese.</li>
<li>Preliminary MetaModelica 2.0 support. (use setCommandLineOptions({\"+g=MetaModelica\"}) ). Execution is as fast as MetaModelica 1.0, except for garbage collection.</li>
<li>Preliminary bootstrapped OpenModelica compiler: OMC now compiles itself, and the bootstrapped compiler passes the test suite. A garbage collector is still missing.</li>
<li>Many bug fixes.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
Improved much faster and more stable 2D plotting through the new OMPlot module. Plotting from binary .mat files. Better integration between OMEdit and OMNotebook, copy/paste between them.
<h4>OpenModelica Shell (OMShell)</h4>
Same as previously, except the improved 2D plotting through OMPlot.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Same as previously.
<h4>OpenModelica Development Environment (OMDev)</h4> 
No changes.
<h4>Graphic Editor OMEdit</h4>
Several enhancements of OMEdit are included in this release. Support for Icon editing is now available. There is also an improved much faster 2D plotting through the new OMPlot module. Better integration between OMEdit and OMNotebook, with copy/paste between them. Interactive on-line simulation is available in an easy-to-use way.
<h4>New OMOptim Optimization Subsystem</h4>
A new optimization subsystem called OMOptim has been added to OpenModelica. Currently, parameter optimization using genetic algorithms is supported in this version 0.9. Pareto front optimization is also supported.
<h4>New Performance Profiler</h4>
A new, low overhead, performance profiler for Modelica models has been developed.
</html>"));
end '1.7.0';
package '1.8.0' "Version 1.8.0 (r10584, 2011-11-25)"
annotation(Documentation(info="<html>
The OpenModelica 1.8 release contains OMC flattening improvements for the Media library - it now flattens the whole library and simulates about 20% of its example models. Moreover, about half of the Fluid library models also flatten. This release also includes two new tool functionalities - the FMI for model exchange import and export, and a new efficient Eclipse-based debugger for Modelica/MetaModelica algorithmic code.
<h4>OpenModelica Compiler (OMC)</h4>
This release includes bug fixes and improvements of the flattening frontend part of the OpenModelica Compiler (OMC) and several improvements of the backend, including, but not restricted to:
A faster and more stable OMC model compiler. The 1.8.0 version flattens and simulates more models than the previous 1.7.0 version.
<ul>
<li>Flattening of the whole Media library, and about half of the Fluid library. Simulation of approximately 20% of the Media library example models.</li>
<li>Functional Mockup Interface FMI 1.0 for model exchange, export and import, for the Windows platform.</li>
<li>Bug fixes in the OpenModelica graphical model connection editor OMEdit, supporting easy-to-use graphical drag-and-drop modeling and MSL 3.1.</li>
<li>Bug fixes in the OMOptim optimization subsystem.</li>
<li>Beta version of compiler support for a new Eclipse-based very efficient algorithmic code debugger for functions in MetaModelica/Modelica, available in the development environment when using the bootstrapped OpenModelica compiler.</li> 
<li>Improvements in initialization of simulations.</li>
<li>Improved index reduction with dynamic state selection, which improves simulation.</li>
<li>Better error messages from several parts of the compiler, including a new API call for giving better error messages.</li>
<li>Automatic partitioning of equation systems and multi-core parallel simulation of independent parts based on the shared-memory OpenMP model. This version is a preliminary experimental version without load balancing.</li>
</ul>
<h4>OpenModelica Notebook (OMNotebook)</h4>
No changes.
<h4>OpenModelica Shell (OMShell)</h4>
Small performance improvements.
<h4>OpenModelica Eclipse Plug-in (MDT)</h4>
Small fixes and improvements. MDT now also includes a beta version of a new Eclipse-based very efficient algorithmic code debugger for functions in MetaModelica/Modelica.
<h4>OpenModelica Development Environment (OMDev)</h4>
Third party binaries, including Qt libraries and executable Qt clients, are now part of the OMDev package. Also, now uses GCC 4.4.0 instead of the earlier GCC 3.4.5.
<h4>Graphic Editor OMEdit</h4>
Bug fixes. Access to FMI Import/Export through a pull-down menu. Improved configuration of library loading. A function to go to a specific line number. A button to cancel an on-going simulation. Support for some updated OMC API calls.
<h4>New OMOptim Optimization Subsystem</h4>
Bug fixes, especially in the Linux version.
<h4>FMI Support</h4>
The Functional Mockup Interface FMI 1.0 for model exchange import and export is supported by this release. The functionality is accessible via API calls as well as via pull-down menu commands in OMEdit.
</html>"));
end '1.8.0';
package trunk "Current version"
annotation(Documentation(info="<html>
Major changes (up to r10819):
<h4>OpenModelica Compiler (OMC)</h4>
<ul>
<li>Store the documentation as Modelica <a href=\"modelica://ModelicaReference.Annotations.Documentation\">Documentation</a> annotations.</li>
<li>Re-implementation of the simulation runtime using C instead of C++ (this was needed to export FMI source-based packages).</li>
<li>Changed the internal representation of various structures to share more memory. This significantly improved the performance for very large models that use records.</li>
<li>New options to API calls <strong>list</strong>, <strong>loadFile</strong>, and more.</li>
<li>Initial support for operator overloading (in progress).</li>
<li>Enforce the restriction that <strong>input</strong> arguments of functions may not be assigned to.</li>
<li>Improved the scripting environment. <code>cl := $TypeName(Modelica)</code>;getClassComment(cl);</code> now works as expected. As does looping over lists of typenames and using reduction expressions.</li>
<li>Various bugfixes.</li>
<h4>OMNotebook</h4>
Added OMSketch (...).
</ul>
</html>"));
end trunk;
annotation(Documentation(info="<html>
This section summarizes the major releases of OpenModelica and what changed between the major versions.
However, OpenModelica is developed rapidly and updated on a continous basis. There are probably changes
in the <a href=\"modelica://OpenModelica.UsersGuide.ReleaseNotes.trunk\">current version</a>.
</html>"));
end ReleaseNotes;
end UsersGuide;

annotation(
  Documentation(revisions="<html>See <a href=\"modelica://OpenModelica.UsersGuide.ReleaseNotes\">ReleaseNotes</a></html>",
  __Dymola_DocumentationClass = true),
  preferredView="text");
end OpenModelica;