simulation_options.c

/*
 * This file is part of OpenModelica.
 *
 * Copyright (c) 1998-2014, Open Source Modelica Consortium (OSMC),
 * c/o Linköpings universitet, Department of Computer and Information Science,
 * SE-58183 Linköping, Sweden.
 *
 * All rights reserved.
 *
 * THIS PROGRAM IS PROVIDED UNDER THE TERMS OF THE BSD NEW LICENSE OR THE
 * GPL VERSION 3 LICENSE OR THE OSMC PUBLIC LICENSE (OSMC-PL) VERSION 1.2.
 * ANY USE, REPRODUCTION OR DISTRIBUTION OF THIS PROGRAM CONSTITUTES
 * RECIPIENT'S ACCEPTANCE OF THE OSMC PUBLIC LICENSE OR THE GPL VERSION 3,
 * ACCORDING TO RECIPIENTS CHOICE.
 *
 * The OpenModelica software and the OSMC (Open Source Modelica Consortium)
 * Public License (OSMC-PL) are obtained from OSMC, either from the above
 * address, from the URLs: http://www.openmodelica.org or
 * http://www.ida.liu.se/projects/OpenModelica, and in the OpenModelica
 * distribution. GNU version 3 is obtained from:
 * http://www.gnu.org/copyleft/gpl.html. The New BSD License is obtained from:
 * http://www.opensource.org/licenses/BSD-3-Clause.
 *
 * This program is distributed WITHOUT ANY WARRANTY; without even the implied
 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, EXCEPT AS
 * EXPRESSLY SET FORTH IN THE BY RECIPIENT SELECTED SUBSIDIARY LICENSE
 * CONDITIONS OF OSMC-PL.
 *
 */

#include "simulation_options.h"

const char *FLAG_NAME[FLAG_MAX+1] = {
  "FLAG_UNKNOWN",

  /* FLAG_ABORT_SLOW */                   "abortSlowSimulation",
  /* FLAG_ALARM */                        "alarm",
  /* FLAG_CLOCK */                        "clock",
  /* FLAG_CPU */                          "cpu",
  /* FLAG_CSV_OSTEP */                    "csvOstep",
  /* FLAG_CVODE_ITER */                   "cvodeNonlinearSolverIteration",
  /* FLAG_CVODE_LMM */                    "cvodeLinearMultistepMethod",
  /* FLAG_DAE_MODE */                     "daeMode",
  /* FLAG_DELTA_X_LINEARIZE */            "deltaXLinearize",
  /* FLAG_DELTA_X_SOLVER */               "deltaXSolver",
  /* FLAG_EMBEDDED_SERVER */              "embeddedServer",
  /* FLAG_EMBEDDED_SERVER_PORT */         "embeddedServerPort",
  /* FLAG_MAT_SYNC */                     "mat_sync",
  /* FLAG_EMIT_PROTECTED */               "emit_protected",
  /* FLAG_DATA_RECONCILE_Eps */           "eps",
  /* FLAG_F */                            "f",
  /* FLAG_HELP */                         "help",
  /* FLAG_HOMOTOPY_ADAPT_BEND */          "homAdaptBend",
  /* FLAG_HOMOTOPY_BACKTRACE_STRATEGY */  "homBacktraceStrategy",
  /* FLAG_HOMOTOPY_H_EPS */               "homHEps",
  /* FLAG_HOMOTOPY_MAX_LAMBDA_STEPS */    "homMaxLambdaSteps",
  /* FLAG_HOMOTOPY_MAX_NEWTON_STEPS */    "homMaxNewtonSteps",
  /* FLAG_HOMOTOPY_MAX_TRIES */           "homMaxTries",
  /* FLAG_HOMOTOPY_NEG_START_DIR */       "homNegStartDir",
  /* FLAG_HOMOTOPY_ON_FIRST_TRY */        "homotopyOnFirstTry",
  /* FLAG_NO_HOMOTOPY_ON_FIRST_TRY */     "noHomotopyOnFirstTry",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR */      "homTauDecFac",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR_PRED */ "homTauDecFacPredictor",
  /* FLAG_HOMOTOPY_TAU_INC_FACTOR */      "homTauIncFac",
  /* FLAG_HOMOTOPY_TAU_INC_THRESHOLD */   "homTauIncThreshold",
  /* FLAG_HOMOTOPY_TAU_MAX */             "homTauMax",
  /* FLAG_HOMOTOPY_TAU_MIN */             "homTauMin",
  /* FLAG_HOMOTOPY_TAU_START */           "homTauStart",
  /* FLAG_IDA_MAXERRORTESTFAIL */         "idaMaxErrorTestFails",
  /* FLAG_IDA_MAXNONLINITERS */           "idaMaxNonLinIters",
  /* FLAG_IDA_MAXCONVFAILS */             "idaMaxConvFails",
  /* FLAG_IDA_NONLINCONVCOEF */           "idaNonLinConvCoef",
  /* FLAG_IDA_LS */                       "idaLS",
  /* FLAG_IDA_SCALING */                  "idaScaling",
  /* FLAG_IDAS */                         "idaSensitivity",
  /* FLAG_IGNORE_HIDERESULT */            "ignoreHideResult",
  /* FLAG_IIF */                          "iif",
  /* FLAG_IIM */                          "iim",
  /* FLAG_IIT */                          "iit",
  /* FLAG_ILS */                          "ils",
  /* FLAG_IMPRK_ORDER */                  "impRKOrder",
  /* FLAG_IMPRK_LS */                     "impRKLS",
  /* FLAG_INITIAL_STEP_SIZE */            "initialStepSize",
  /* FLAG_INPUT_CSV */                    "csvInput",
  /* FLAG_INPUT_FILE */                   "exInputFile",
  /* FLAG_INPUT_FILE_STATES */            "stateFile",
  /* FLAG_INPUT_PATH */                   "inputPath",
  /* FLAG_IPOPT_HESSE*/                   "ipopt_hesse",
  /* FLAG_IPOPT_INIT*/                    "ipopt_init",
  /* FLAG_IPOPT_JAC*/                     "ipopt_jac",
  /* FLAG_IPOPT_MAX_ITER */               "ipopt_max_iter",
  /* FLAG_IPOPT_WARM_START */             "ipopt_warm_start",
  /* FLAG_JACOBIAN */                     "jacobian",
  /* FLAG_JACOBIAN_THREADS */             "jacobianThreads",
  /* FLAG_L */                            "l",
  /* FLAG_L_DATA_RECOVERY */              "l_datarec",
  /* FLAG_LOG_FORMAT */                   "logFormat",
  /* FLAG_LS */                           "ls",
  /* FLAG_LS_IPOPT */                     "ls_ipopt",
  /* FLAG_LSS */                          "lss",
  /* FLAG_LSS_MAX_DENSITY */              "lssMaxDensity",
  /* FLAG_LSS_MIN_SIZE */                 "lssMinSize",
  /* FLAG_LV */                           "lv",
  /* FLAG_LV_TIME */                      "lv_time",
  /* FLAG_MAX_BISECTION_ITERATIONS */     "mbi",
  /* FLAG_MAX_EVENT_ITERATIONS */         "mei",
  /* FLAG_MAX_ORDER */                    "maxIntegrationOrder",
  /* FLAG_MAX_STEP_SIZE */                "maxStepSize",
  /* FLAG_MEASURETIMEPLOTFORMAT */        "measureTimePlotFormat",
  /* FLAG_NEWTON_FTOL */                  "newtonFTol",
  /* FLAG_NEWTON_MAX_STEP_FACTOR */       "newtonMaxStepFactor",
  /* FLAG_NEWTON_XTOL */                  "newtonXTol",
  /* FLAG_NEWTON_STRATEGY */              "newton",
  /* FLAG_NLS */                          "nls",
  /* FLAG_NLS_INFO */                     "nlsInfo",
  /* FLAG_NLS_LS */                       "nlsLS",
  /* FLAG_NLS_MAX_DENSITY */              "nlssMaxDensity",
  /* FLAG_NLS_MIN_SIZE */                 "nlssMinSize",
  /* FLAG_NOEMIT */                       "noemit",
  /* FLAG_NOEQUIDISTANT_GRID */           "noEquidistantTimeGrid",
  /* FLAG_NOEQUIDISTANT_OUT_FREQ*/        "noEquidistantOutputFrequency",
  /* FLAG_NOEQUIDISTANT_OUT_TIME*/        "noEquidistantOutputTime",
  /* FLAG_NOEVENTEMIT */                  "noEventEmit",
  /* FLAG_NO_RESTART */                   "noRestart",
  /* FLAG_NO_ROOTFINDING */               "noRootFinding",
  /* FLAG_NO_SCALING */                   "noScaling",
  /* FLAG_NO_SUPPRESS_ALG */              "noSuppressAlg",
  /* FLAG_OPTDEBUGEJAC */                 "optDebugJac",
  /* FLAG_OPTIMIZER_NP */                 "optimizerNP",
  /* FLAG_OPTIMIZER_TGRID */              "optimizerTimeGrid",
  /* FLAG_OUTPUT */                       "output",
  /* FLAG_OUTPUT_PATH */                  "outputPath",
  /* FLAG_OVERRIDE */                     "override",
  /* FLAG_OVERRIDE_FILE */                "overrideFile",
  /* FLAG_PORT */                         "port",
  /* FLAG_R */                            "r",
  /* FLAG_DATA_RECONCILE  */              "reconcile",
  /* FLAG_RT */                           "rt",
  /* FLAG_S */                            "s",
  /* FLAG_SINGLE_PRECISION */             "single",
  /* FLAG_SOLVER_STEPS */                 "steps",
  /* FLAG_STEADY_STATE */                 "steadyState",
  /* FLAG_STEADY_STATE_TOL */             "steadyStateTol",
  /* FLAG_DATA_RECONCILE_Sx */            "sx",
  /* FLAG_UP_HESSIAN */                   "keepHessian",
  /* FLAG_W */                            "w",

  "FLAG_MAX"
};

const char *FLAG_DESC[FLAG_MAX+1] = {
  "unknown",

  /* FLAG_ABORT_SLOW */                   "aborts if the simulation chatters",
  /* FLAG_ALARM */                        "aborts after the given number of seconds (0 disables)",
  /* FLAG_CLOCK */                        "selects the type of clock to use -clock=RT, -clock=CYC or -clock=CPU",
  /* FLAG_CPU */                          "dumps the cpu-time into the result file",
  /* FLAG_CSV_OSTEP */                    "value specifies csv-files for debug values for optimizer step",
  /* FLAG_CVODE_ITER */                   "nonlinear solver iteration for CVODE solver",
  /* FLAG_CVODE_LMM */                    "linear multistep method for CVODE solver",
  /* FLAG_DAE_MODE */                     "flag to let the integrator use daeResiduals",
  /* FLAG_DELTA_X_LINEARIZE */            "value specifies the delta x value for numerical differentiation used by linearization. The default value is 1e-5.",
  /* FLAG_DELTA_X_SOLVER */               "value specifies the delta x value for numerical differentiation used by integrator. The default values is sqrt(DBL_EPSILON).",
  /* FLAG_EMBEDDED_SERVER */              "enables an embedded server. Valid values: none, opc-da [broken], opc-ua [experimental], or the path to a shared object.",
  /* FLAG_EMBEDDED_SERVER_PORT */         "[int (default 4841)] value specifies the port number used by the embedded server",
  /* FLAG_MAT_SYNC */                     "[int (default 0)] syncs the mat file header after emitting every N time-points (default disabled)",
  /* FLAG_EMIT_PROTECTED */               "emits protected variables to the result-file",
  /* FLAG_DATA_RECONCILE_Eps */           "value specifies the number of convergence iteration to be performed for DataReconciliation",
  /* FLAG_F */                            "value specifies a new setup XML file to the generated simulation code",
  /* FLAG_HELP */                         "get detailed information that specifies the command-line flag",
  /* FLAG_HOMOTOPY_ADAPT_BEND */          "[double (default 0.5)] maximum trajectory bending to accept the homotopy step",
  /* FLAG_HOMOTOPY_BACKTRACE_STRATEGY */  "value specifies the backtrace strategy in the homotopy corrector step (fix (default), orthogonal)",
  /* FLAG_HOMOTOPY_H_EPS */               "[double (default 1e-5)] tolerance respecting residuals for the homotopy H-function",
  /* FLAG_HOMOTOPY_MAX_LAMBDA_STEPS */    "[int (default size dependent)] maximum lambda steps allowed to run the homotopy path",
  /* FLAG_HOMOTOPY_MAX_NEWTON_STEPS */    "[int (default 20)] maximum newton steps in the homotopy corrector step",
  /* FLAG_HOMOTOPY_MAX_TRIES */           "[int (default 10)] maximum number of tries for one homotopy lambda step",
  /* FLAG_HOMOTOPY_NEG_START_DIR */       "start to run along the homotopy path in the negative direction",
  /* FLAG_HOMOTOPY_ON_FIRST_TRY */        "directly use the homotopy method to solve the initialization problem",
  /* FLAG_NO_HOMOTOPY_ON_FIRST_TRY */     "disable the use of the homotopy method to solve the initialization problem",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR */      "[double (default 10.0)] decrease homotopy step size tau by this factor if tau is too big in the homotopy corrector step",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR_PRED */ "[double (default 2.0)] decrease homotopy step size tau by this factor if tau is too big in the homotopy predictor step",
  /* FLAG_HOMOTOPY_TAU_INC_FACTOR */      "[double (default 2.0)] increase homotopy step size tau by this factor if tau is too small in the homotopy corrector step",
  /* FLAG_HOMOTOPY_TAU_INC_THRESHOLD */   "[double (default 10.0)] increase the homotopy step size tau if bend < homAdaptBend/homTauIncThreshold",
  /* FLAG_HOMOTOPY_TAU_MAX */             "[double (default 10.0)] maximum homotopy step size tau for the homotopy process",
  /* FLAG_HOMOTOPY_TAU_MIN */             "[double (default 1e-4)] minimum homotopy step size tau for the homotopy process",
  /* FLAG_HOMOTOPY_TAU_START */           "[double (default 0.2)] homotopy step size tau at the beginning of the homotopy process",
  /* FLAG_IDA_MAXERRORTESTFAIL */         "value specifies the maximum number of error test failures in attempting one step. The default value is 7.",
  /* FLAG_IDA_MAXNONLINITERS */           "value specifies the maximum number of nonlinear solver iterations at one step. The default value is 3.",
  /* FLAG_IDA_MAXCONVFAILS */             "value specifies the maximum number of nonlinear solver convergence failures at one step. The default value is 10.",
  /* FLAG_IDA_NONLINCONVCOEF */           "value specifies the safety factor in the nonlinear convergence test. The default value is 0.33.",
  /* FLAG_IDA_LS */                       "select the linear solver used by ida",
  /* FLAG_IDA_SCALING */                  "enable scaling of the IDA solver",
  /* FLAG_IDAS */                         "flag to add sensitivity information to the result files",
  /* FLAG_IGNORE_HIDERESULT */            "ignore HideResult=true annotation",
  /* FLAG_IIF */                          "value specifies an external file for the initialization of the model",
  /* FLAG_IIM */                          "value specifies the initialization method",
  /* FLAG_IIT */                          "[double] value specifies a time for the initialization of the model",
  /* FLAG_ILS */                          "[int (default 4)] number of lambda steps for homotopy methods",
  /* FLAG_IMPRK_ORDER */                  "[int (default 5)] value specifies the integration order of the implicit Runge-Kutta method. Valid values: 1-6",
  /* FLAG_IMPRK_LS */                     "selects the linear solver of the integration methods: impeuler, trapezoid and imprungekuta",
  /* FLAG_INITIAL_STEP_SIZE */            "value specifies an initial step size for supported solver",
  /* FLAG_INPUT_CSV */                    "value specifies an csv-file with inputs for the simulation/optimization of the model",
  /* FLAG_INPUT_FILE */                   "value specifies an external file with inputs for the simulation/optimization of the model",
  /* FLAG_INPUT_FILE_STATES */            "value specifies an file with states start values for the optimization of the model",
  /* FLAG_INPUT_PATH */                   "value specifies a path for reading the input files i.e., model_init.xml and model_info.json",
  /* FLAG_IPOPT_HESSE */                  "value specifies the hessian for Ipopt",
  /* FLAG_IPOPT_INIT */                   "value specifies the initial guess for optimization",
  /* FLAG_IPOPT_JAC */                    "value specifies the Jacobian for Ipopt",
  /* FLAG_IPOPT_MAX_ITER */               "value specifies the max number of iteration for ipopt",
  /* FLAG_IPOPT_WARM_START */             "value specifies lvl for a warm start in ipopt: 1,2,3,...",
  /* FLAG_JACOBIAN */                     "select the calculation method of the Jacobian used only by ida and dassl solver.",
  /* FLAG_JACOBIAN_THREADS */             "[int default: 1] value specifies the number of threads for jacobian evaluation in dassl or ida.",
  /* FLAG_L */                            "value specifies a time where the linearization of the model should be performed",
  /* FLAG_L_DATA_RECOVERY */              "emit data recovery matrices with model linearization",
  /* FLAG_LOG_FORMAT */                   "value specifies the log format of the executable. -logFormat=text (default), -logFormat=xml or -logFormat=xmltcp",
  /* FLAG_LS */                           "value specifies the linear solver method (default: lapack, totalpivot (fallback))",
  /* FLAG_LS_IPOPT */                     "value specifies the linear solver method for ipopt",
  /* FLAG_LSS */                          "value specifies the linear sparse solver method (default: umfpack)",
  /* FLAG_LSS_MAX_DENSITY */              "[double (default 0.2)] value specifies the maximum density for using a linear sparse solver",
  /* FLAG_LSS_MIN_SIZE */                 "[int (default 4001)] value specifies the minimum system size for using a linear sparse solver",
  /* FLAG_LV */                           "[string list] value specifies the logging level",
  /* FLAG_LV_TIME */                      "[double list] specifying time interval to allow loging in",
  /* FLAG_MAX_BISECTION_ITERATIONS */     "[int (default 0)] value specifies the maximum number of bisection iterations for state event detection or zero for default behavior",
  /* FLAG_MAX_EVENT_ITERATIONS */         "[int (default 20)] value specifies the maximum number of event iterations",
  /* FLAG_MAX_ORDER */                    "value specifies maximum integration order for supported solver",
  /* FLAG_MAX_STEP_SIZE */                "value specifies maximum absolute step size for supported solver",
  /* FLAG_MEASURETIMEPLOTFORMAT */        "value specifies the output format of the measure time functionality",
  /* FLAG_NEWTON_FTOL */                  "[double (default 1e-12)] tolerance respecting residuals for updating solution vector in Newton solver",
  /* FLAG_NEWTON_MAX_STEP_FACTOR */       "[double (default 1e12)] maximum newton step factor mxnewtstep = maxStepFactor * norm2(xScaling). Used currently only by KINSOL.",
  /* FLAG_NEWTON_XTOL */                  "[double (default 1e-12)] tolerance respecting newton correction (delta_x) for updating solution vector in Newton solver",
  /* FLAG_NEWTON_STRATEGY */              "value specifies the damping strategy for the newton solver",
  /* FLAG_NLS */                          "value specifies the nonlinear solver",
  /* FLAG_NLS_INFO */                     "outputs detailed information about solving process of non-linear systems into csv files.",
  /* FLAG_NLS_LS */                       "value specifies the linear solver used by the non-linear solver",
  /* FLAG_NLS_MAX_DENSITY */              "[double (default 0.2)] value specifies the maximum density for using a non-linear sparse solver",
  /* FLAG_NLS_MIN_SIZE */                 "[int (default 10001)] value specifies the minimum system size for using a non-linear sparse solver",
  /* FLAG_NOEMIT */                       "do not emit any results to the result file",
  /* FLAG_NOEQUIDISTANT_GRID */           "stores results not in equidistant time grid as given by stepSize or numberOfIntervals, instead the variable step size of dassl or ida integrator.",
  /* FLAG_NOEQUIDISTANT_OUT_FREQ*/        "value controls the output frequency in noEquidistantTimeGrid mode",
  /* FLAG_NOEQUIDISTANT_OUT_TIME*/        "value controls the output time point in noEquidistantOutputTime mode",
  /* FLAG_NOEVENTEMIT */                  "do not emit event points to the result file",
  /* FLAG_NO_RESTART */                   "disables the restart of the integration method after an event is performed, used by the methods: dassl, ida",
  /* FLAG_NO_ROOTFINDING */               "disables the internal root finding procedure of methods: dassl and ida.",
  /* FLAG_NO_SCALING */                   "disables scaling for the variables and the residuals in the algebraic nonlinear solver KINSOL.",
  /* FLAG_NO_SUPPRESS_ALG */              "flag to not suppress algebraic variables in the local error test of ida solver in daeMode",
  /* FLAG_OPTDEBUGEJAC */                 "value specifies the number of iter from the dyn. optimization, which will be debug, creating *csv and *py file",
  /* FLAG_OPTIMIZER_NP */                 "value specifies the number of points in a subinterval",
  /* FLAG_OPTIMIZER_TGRID */              "value specifies external file with time points.",
  /* FLAG_OUTPUT */                       "output the variables a, b and c at the end of the simulation to the standard output",
  /* FLAG_OUTPUT_PATH */                  "value specifies a path for writing the output files i.e., model_res.mat, model_prof.intdata, model_prof.realdata etc.",
  /* FLAG_OVERRIDE */                     "override the variables or the simulation settings in the XML setup file",
  /* FLAG_OVERRIDE_FILE */                "will override the variables or the simulation settings in the XML setup file with the values from the file",
  /* FLAG_PORT */                         "value specifies the port for simulation status (default disabled)",
  /* FLAG_R */                            "value specifies a new result file than the default Model_res.mat",
  /* FLAG_DATA_RECONCILE */               "Run the DataReconciliation algorithm for constrained equation",
  /* FLAG_RT */                           "value specifies the scaling factor for real-time synchronization (0 disables)",
  /* FLAG_S */                            "value specifies the integration method",
  /* FLAG_SINGLE */                       "output in single precision",
  /* FLAG_SOLVER_STEPS */                 "dumps the number of integration steps into the result file",
  /* FLAG_STEADY_STATE */                 "aborts if steady state is reached",
  /* FLAG_STEADY_STATE_TOL */             "[double (default 1e-3)] This relative tolerance is used to detect steady state.",
  /* FLAG_DATA_RECONCILE_Sx */            "value specifies a csv-file with inputs as covariance matrix Sx for DataReconciliation",
  /* FLAG_UP_HESSIAN */                   "value specifies the number of steps, which keep hessian matrix constant",
  /* FLAG_W */                            "shows all warnings even if a related log-stream is inactive",

  "FLAG_MAX"
};

const char *FLAG_DETAILED_DESC[FLAG_MAX+1] = {
  "unknown",
  /* FLAG_ABORT_SLOW */
  "  Aborts if the simulation chatters.",
  /* FLAG_ALARM */
  "  Aborts after the given number of seconds (default=0 disables the alarm).",
  /* FLAG_CLOCK */
  "  Selects the type of clock to use. Valid options include:\n\n"
  "  * RT (monotonic real-time clock)\n"
  "  * CYC (cpu cycles measured with RDTSC)\n"
  "  * CPU (process-based CPU-time)",
  /* FLAG_CPU */
  "  Dumps the cpu-time into the result file using the variable named $cpuTime.",
  /* FLAG_CSV_OSTEP */
  "  Value specifies csv-files for debug values for optimizer step.",
  /* FLAG_CVODE_ITER */
  "  Nonlinear solver iteration for CVODE solver. Default: Depends on flag cvodeLinearMultistepMethod. Valid values\n\n"
  "  * CV_NEWTON      - Newton iteration.\n"
  "                     Advised to use together with flag -cvodeLinearMultistepMethod=CV_BDF.\n"
  "  * CV_FUNCTIONAL  - Functional iteration.\n"
  "                     Advised to use together with flag -cvodeLinearMultistepMethod=CV_ADAMS.",
  /* FLAG_CVODE_LMM */
  "  Linear multistep method for CVODE solver. Default: CV_BDF. Valid values\n\n"
  "  * CV_BDF    - BDF linear multistep method for stiff problems.\n"
  "                Use together with flag -cvodeNonlinearSolverIteration=CV_NEWTON or don't set cvodeNonlinearSolverIteration.\n"
  "  * CV_ADAMS  - Adams-Moulton linear multistep method for nonstiff problems.\n"
  "                Use together with flag -cvodeNonlinearSolverIteration=CV_FUNCTIONAL or don't set cvodeNonlinearSolverIteration.",
  /* FLAG_DAE_MODE */
  "  Enables daeMode simulation if the model was compiled with the omc flag --daeMode and ida method is used.",
  /* FLAG_DELTA_X_LINEARIZE */
  "  Value specifies the delta x value for numerical differentiation used by linearization. The default value is sqrt(DBL_EPSILON*2e1).",
  /* FLAG_DELTA_X_SOLVER */
  "  Value specifies the delta x value for numerical differentiation used by integration method. The default values is sqrt(DBL_EPSILON).",
  /* FLAG_EMBEDDED_SERVER */
  "  Enables an embedded server. Valid values:\n\n"
  "  * none - default, run without embedded server\n"
  "  * opc-da - [broken] run with embedded OPC DA server (WIN32 only, uses proprietary OPC SC interface)\n"
  "  * opc-ua - [experimental] run with embedded OPC UA server (TCP port 4841 for now; will have its own configuration option later)\n"
  "  * filename - path to a shared object implementing the embedded server interface (requires access to internal OMC data-structures if you want to read or write data)",
  /* FLAG_EMBEDDED_SERVER_PORT */
  "  Value specifies the port number used by the embedded server. The default value is 4841.",
  /* FLAG_MAT_SYNC */
  "  Syncs the mat file header after emitting every N time-points.",
  /* FLAG_EMIT_PROTECTED */
  "  Emits protected variables to the result-file.",
  /* FLAG_DATA_RECONCILE_Eps */
  "  Value specifies the number of convergence iteration to be performed for DataReconciliation",
  /* FLAG_F */
  "  Value specifies a new setup XML file to the generated simulation code.\n",
  /* FLAG_HELP */
  "  Get detailed information that specifies the command-line flag\n\n"
  "  For example, -help=f prints detailed information for command-line flag f.",
  /* FLAG_HOMOTOPY_ADAPT_BEND */
  "  Maximum trajectory bending to accept the homotopy step.\n"
  "  Default: 0.5, which means the corrector vector has to be smaller than half of the predictor vector.",
  /* FLAG_HOMOTOPY_BACKTRACE_STRATEGY */
  "  Value specifies the backtrace strategy in the homotopy corrector step. Valid values:\n\n"
  "  * fix - default, go back to the path by fixing one coordinate\n"
  "  * orthogonal - go back to the path in an orthogonal direction to the tangent vector",
  /* FLAG_HOMOTOPY_H_EPS */
  "  Tolerance respecting residuals for the homotopy H-function (default: 1e-5).\n\n"
  "  In the last step (lambda=1) newtonFTol is used as tolerance.",
  /* FLAG_HOMOTOPY_MAX_LAMBDA_STEPS */
  "  Maximum lambda steps allowed to run the homotopy path (default: system size * 100).",
  /* FLAG_HOMOTOPY_MAX_NEWTON_STEPS */
  "  Maximum newton steps in the homotopy corrector step (default: 20).",
  /* FLAG_HOMOTOPY_MAX_TRIES */
  "  Maximum number of tries for one homotopy lambda step (default: 10).",
  /* FLAG_HOMOTOPY_NEG_START_DIR */
  "  Start to run along the homotopy path in the negative direction.\n\n"
  "  If one direction fails, the other direction is always used as fallback option.",
  /* FLAG_HOMOTOPY_ON_FIRST_TRY */
  "  If the model contains the homotopy operator, directly use the homotopy method to solve the initialization problem.\n"
  "  Without this flag, the solver first tries to solve the initialization problem without homotopy and only uses homotopy as fallback option.",
  /* FLAG_NO_HOMOTOPY_ON_FIRST_TRY */
  "  Disable the use of the homotopy method to solve the initialization problem.\n"
  "  Without this flag, the solver tries to solve the initialization problem with homotopy if the model contains the homotopy-operator.",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR */
  "  Decrease homotopy step size tau by this factor if tau is too big in the homotopy corrector step (default: 10.0).",
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR_PRED */
  "  Decrease homotopy step size tau by this factor if tau is too big in the homotopy predictor step (default: 2.0).",
  /* FLAG_HOMOTOPY_TAU_INC_FACTOR */
  "  Increase homotopy step size tau by this factor if tau can be increased after the homotopy corrector step (default: 2.0).",
  /* FLAG_HOMOTOPY_TAU_INC_THRESHOLD */
  "  Increase the homotopy step size tau if homAdaptBend/bend > homTauIncThreshold (default: 10).",
  /* FLAG_HOMOTOPY_TAU_MAX */
  "  Maximum homotopy step size tau for the homotopy process (default: 10).",
  /* FLAG_HOMOTOPY_TAU_MIN */
  "  Minimum homotopy step size tau for the homotopy process (default: 1e-4).",
  /* FLAG_HOMOTOPY_TAU_START */
  "  Homotopy step size tau at the beginning of the homotopy process (default: 0.2).",
  /* FLAG_IDA_MAXERRORTESTFAIL */
  "  Value specifies the maximum number of error test failures in attempting one step. The default value is 7.",
  /* FLAG_IDA_MAXNONLINITERS */
  "  Value specifies the maximum number of nonlinear solver iterations at one step. The default value is 3.",
  /* FLAG_IDA_MAXCONVFAILS */
  "  Value specifies the maximum number of nonlinear solver convergence failures at one step. The default value is 10.",
  /* FLAG_IDA_NONLINCONVCOEF */
  "  Value specifies the safety factor in the nonlinear convergence test. The default value is 0.33.",
  /* FLAG_IDA_LS */
  "  Value specifies the linear solver of the ida integration method. Valid values:\n",
  /* FLAG_IDA_SCALING */
  "  Enable scaling of the IDA solver.",
  /* FLAG_IDAS */
  "  Enables sensitivity analysis with respect to parameters if the model is compiled with omc flag --calculateSensitivities.",
  /* FLAG_IGNORE_HIDERESULT */
  "  Emits also variables with HideResult=true annotation.",
  /* FLAG_IIF */
  "  Value specifies an external file for the initialization of the model.",
  /* FLAG_IIM */
  "  Value specifies the initialization method.\n  Following options are available: 'symbolic' (default) and 'none'.",
  /* FLAG_IIT */
  "  Value [Real] specifies a time for the initialization of the model.",
  /* FLAG_ILS */
  "  Value specifies the number of steps for homotopy method (required: -iim=symbolic).\n"
  "  The value is an Integer with default value 4.",
  /* FLAG_IMPRK_ORDER */
  "  Value specifies the integration order of the implicit Runge-Kutta method. Valid values: 1 to 6. Default order is 5.",
  /* FLAG_IMPRK_LS */
  "  Selects the linear solver of the integration methods impeuler, trapezoid and imprungekuta:\n\n"
  "  * iterativ - default, sparse iterativ linear solver with fallback case to dense solver\n"
  "  * dense - dense linear solver, SUNDIALS default method",
  /* FLAG_INITIAL_STEP_SIZE */
  "  Value specifies an initial step size, used by the methods: dassl, ida",
  /* FLAG_INPUT_CSV */
  "  Value specifies an csv-file with inputs for the simulation/optimization of the model",
  /* FLAG_INPUT_FILE */
  "  Value specifies an external file with inputs for the simulation/optimization of the model.",
  /* FLAG_INPUT_FILE_STATES */
  "  Value specifies an file with states start values for the optimization of the model.",
  /* FLAG_INPUT_PATH */
  "  Value specifies a path for reading the input files i.e., model_init.xml and model_info.json",
  /* FLAG_IPOPT_HESSE */
  "  Value specifies the hessematrix for Ipopt(OMC, BFGS, const).",
  /* FLAG_IPOPT_INIT */
  "  Value specifies the initial guess for optimization (sim, const).",
  /* FLAG_IPOPT_JAC */
  "  Value specifies the Jacobian for Ipopt(SYM, NUM, NUMDENSE).",
  /* FLAG_IPOPT_MAX_ITER */
  "  Value specifies the max number of iteration for ipopt.",
  /* FLAG_IPOPT_WARM_START */
  "  Value specifies lvl for a warm start in ipopt: 1,2,3,...",
  /* FLAG_JACOBIAN */
  "  Select the calculation method for Jacobian used by the integration method:\n",
  /* FLAG_JACOBIAN_THREADS */
  "  Value specifies the number of threads for jacobian evaluation in dassl or ida."
  "  The value is an Integer with default value 1.",
  /* FLAG_L */
  "  Value specifies a time where the linearization of the model should be performed.",
  /* FLAG_L_DATA_RECOVERY */
  "  Emit data recovery matrices with model linearization.",
  /* FLAG_LOG_FORMAT */
  "  Value specifies the log format of the executable:\n\n"
  "  * text (default)\n"
  "  * xml\n"
  "  * xmltcp (required -port flag)",
  /* FLAG_LS */
  "  Value specifies the linear solver method",
  /* FLAG_LS_IPOPT */
  "  Value specifies the linear solver method for Ipopt, default mumps.\n"
  "  Note: Use if you build ipopt with other linear solver like ma27",
  /* FLAG_LSS */
  "  Value specifies the linear sparse solver method",
  /* FLAG_LSS_MAX_DENSITY */
  "  Value specifies the maximum density for using a linear sparse solver.\n"
  "  The value is a Double with default value 0.2.",
  /* FLAG_LSS_MIN_SIZE */
  "  Value specifies the minimum system size for using a linear sparse solver.\n"
  "  The value is an Integer with default value 4001.",
  /* FLAG_LV */
  "  Value (a comma-separated String list) specifies which logging levels to\n"
  "  enable. Multiple options can be enabled at the same time.",
  /* FLAG_LV_TIME */
  "  Interval (a comma-separated Double list with two elements) specifies in which\n"
  "  time interval logging is active. Doesn't affect LOG_STDOUT, LOG_ASSERT, and\n"
  "  LOG_SUCCESS, LOG_STATS, LOG_STATS_V.",
  /* FLAG_MAX_BISECTION_ITERATIONS */
  "  Value specifies the maximum number of bisection iterations for state event\n"
  "  detection or zero for default behavior",
  /* FLAG_MAX_EVENT_ITERATIONS */
  "  Value specifies the maximum number of event iterations.\n"
  "  The value is an Integer with default value 20.",
  /* FLAG_MAX_ORDER */
  "  Value specifies maximum integration order, used by the methods: dassl, ida.",
  /* FLAG_MAX_STEP_SIZE */
  "  Value specifies maximum absolute step size, used by the methods: dassl, ida.",
  /* FLAG_MEASURETIMEPLOTFORMAT */
  "  Value specifies the output format of the measure time functionality:\n\n"
  "  * svg\n"
  "  * jpg\n"
  "  * ps\n"
  "  * gif\n"
  "  * ...",
  /* FLAG_NEWTON_FTOL */
  "  Tolerance respecting residuals for updating solution vector in Newton solver.\n"
  "  Solution is accepted if the (scaled) 2-norm of the residuals is smaller than the tolerance newtonFTol and the (scaled) newton correction (delta_x) is smaller than the tolerance newtonXTol.\n"
  "  The value is a Double with default value 1e-12.",
  /* FLAG_NEWTON_MAX_STEP_FACTOR */
  "  Maximum newton step factor mxnewtstep = maxStepFactor * norm2(xScaling)."
  "  Used currently only by KINSOL.",
  /* FLAG_NEWTON_XTOL */
  "  Tolerance respecting newton correction (delta_x) for updating solution vector in Newton solver.\n"
  "  Solution is accepted if the (scaled) 2-norm of the residuals is smaller than the tolerance newtonFTol and the (scaled) newton correction (delta_x) is smaller than the tolerance newtonXTol.\n"
  "  The value is a Double with default value 1e-12.",
  /* FLAG_NEWTON_STRATEGY */
  "  Value specifies the damping strategy for the newton solver.",
  /* FLAG_NLS */
  "  Value specifies the nonlinear solver:",
  /* FLAG_NLS_INFO */
  "  Outputs detailed information about solving process of non-linear systems into csv files.",
  /* FLAG_NLS_LS */
  "  Value specifies the linear solver used by the non-linear solver:",
  /* FLAG_NLS_MAX_DENSITY */
  "  Value specifies the maximum density for using a non-linear sparse solver.\n"
  "  The value is a Double with default value 0.2.",
  /* FLAG_NLS_MIN_SIZE */
  "  Value specifies the minimum system size for using a non-linear sparse solver.\n"
  "  The value is an Integer with default value 10001.",
  /* FLAG_NOEMIT */
  "  Do not emit any results to the result file.",
  /* FLAG_NOEQUIDISTANT_GRID */
  "  Output the internal steps given by dassl/ida instead of interpolating results\n"
  "  into an equidistant time grid as given by stepSize or numberOfIntervals.",
  /* FLAG_NOEQUIDISTANT_OUT_FREQ*/
  "  Integer value n controls the output frequency in noEquidistantTimeGrid mode\n"
  "  and outputs every n-th time step",
  /* FLAG_NOEQUIDISTANT_OUT_TIME*/
  "  Real value timeValue controls the output time point in noEquidistantOutputTime\n"
  "  mode and outputs every time>=k*timeValue, where k is an integer",
  /* FLAG_NOEVENTEMIT */
  "  Do not emit event points to the result file.",
  /* FLAG_NO_RESTART */
  "  Disables the restart of the integration method after an event is performed, used by the methods: dassl, ida",
  /* FLAG_NO_ROOTFINDING */
  "  Disables the internal root finding procedure of methods: dassl and ida.",
  /* FLAG_NO_SCALING */
  "  Disables scaling for the variables and the residuals in the algebraic nonlinear solver KINSOL.",
  /* FLAG_NO_SUPPRESS_ALG */
  "  Flag to not suppress algebraic variables in the local error test of the ida solver in daeMode.\n"
  "  In general, the use of this option is discouraged when solving DAE systems of index 1,\n"
  "  whereas it is generally encouraged for systems of index 2 or more.",
  /* FLAG_OPTDEBUGEJAC */
  "  Value specifies the number of iterations from the dynamic optimization, which\n"
  "  will be debugged, creating .csv and .py files.",
  /* FLAG_OPTIMIZER_NP */
  "  Value specifies the number of points in a subinterval.\n"
  "  Currently supports numbers 1 and 3.",
  /* FLAG_OPTIMIZER_TGRID */
  "  Value specifies external file with time points.",
  /* FLAG_OUTPUT */
  "  Output the variables a, b and c at the end of the simulation to the standard\n"
  "  output: time = value, a = value, b = value, c = value",
  /* FLAG_OUTPUT_PATH */
  "  Value specifies a path for writing the output files i.e., model_res.mat, model_prof.intdata, model_prof.realdata etc.",
  /* FLAG_OVERRIDE */
  "  Override the variables or the simulation settings in the XML setup file\n"
  "  For example: var1=start1,var2=start2,par3=start3,startTime=val1,stopTime=val2",
  /* FLAG_OVERRIDE_FILE */
  "  Will override the variables or the simulation settings in the XML setup file\n"
  "  with the values from the file.\n"
  "  Note that: -overrideFile CANNOT be used with -override.\n"
  "  Use when variables for -override are too many.\n"
  "  overrideFileName contains lines of the form: var1=start1",
  /* FLAG_PORT */
  "  Value specifies the port for simulation status (default disabled).",
  /* FLAG_R */
  "  Value specifies the name of the output result file.\n"
  "  The default file-name is based on the model name and output format.\n"
  "  For example: Model_res.mat.",
  /* FLAG_DATA_RECONCILE */
  "  Run the DataReconciliation algorithm for constrained equation",
  /* FLAG_RT */
  "  Value specifies the scaling factor for real-time synchronization (0 disables).\n"
  "  A value > 1 means the simulation takes a longer time to simulate.\n",
  /* FLAG_S */
  "  Value specifies the integration method. For additional information see the :ref:`User's Guide <cruntime-integration-methods>`",
  /* FLAG_SINGLE */
  "  Output results in single precision (mat-format only).",
  /* FLAG_SOLVER_STEPS */
  "  Dumps the number of integration steps into the result file.",
  /* FLAG_STEADY_STATE */
  "  Aborts the simulation if steady state is reached.",
  /* FLAG_STEADY_STATE_TOL */
  "  This relative tolerance is used to detect steady state: max(|d(x_i)/dt|/nominal(x_i)) < steadyStateTol",
  /* FLAG_DATA_RECONCILE_Sx */
  "  Value specifies an csv-file with inputs as covariance matrix Sx for DataReconciliation",
  /* FLAG_UP_HESSIAN */
  "  Value specifies the number of steps, which keep Hessian matrix constant.",
  /* FLAG_W */
  "  Shows all warnings even if a related log-stream is inactive.",

  "FLAG_MAX"
};

const int FLAG_TYPE[FLAG_MAX] = {
  FLAG_TYPE_UNKNOWN,

  /* FLAG_ABORT_SLOW */                   FLAG_TYPE_FLAG,
  /* FLAG_ALARM */                        FLAG_TYPE_OPTION,
  /* FLAG_CLOCK */                        FLAG_TYPE_OPTION,
  /* FLAG_CPU */                          FLAG_TYPE_FLAG,
  /* FLAG_CSV_OSTEP */                    FLAG_TYPE_OPTION,
  /* FLAG_CVODE_ITER */                   FLAG_TYPE_OPTION,
  /* FLAG_CVODE_LMM */                    FLAG_TYPE_OPTION,
  /* FLAG_DAE_SOLVING */                  FLAG_TYPE_FLAG,
  /* FLAG_DELTA_X_LINEARIZE */            FLAG_TYPE_OPTION,
  /* FLAG_DELTA_X_SOLVER */               FLAG_TYPE_OPTION,
  /* FLAG_EMBEDDED_SERVER */              FLAG_TYPE_OPTION,
  /* FLAG_EMBEDDED_SERVER_PORT */         FLAG_TYPE_OPTION,
  /* FLAG_MAT_SYNC */                     FLAG_TYPE_OPTION,
  /* FLAG_EMIT_PROTECTED */               FLAG_TYPE_FLAG,
  /* FLAG_DATA_RECONCILE_Eps */           FLAG_TYPE_OPTION,
  /* FLAG_F */                            FLAG_TYPE_OPTION,
  /* FLAG_HELP */                         FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_ADAPT_BEND */          FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_BACKTRACE_STRATEGY */  FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_H_EPS */               FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_MAX_LAMBDA_STEPS */    FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_MAX_NEWTON_STEPS */    FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_MAX_TRIES */           FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_NEG_START_DIR */       FLAG_TYPE_FLAG,
  /* FLAG_HOMOTOPY_ON_FIRST_TRY */        FLAG_TYPE_FLAG,
  /* FLAG_NO_HOMOTOPY_ON_FIRST_TRY */     FLAG_TYPE_FLAG,
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR */      FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_DEC_FACTOR_PRED */ FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_INC_FACTOR */      FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_INC_THRESHOLD */   FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_MAX */             FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_MIN */             FLAG_TYPE_OPTION,
  /* FLAG_HOMOTOPY_TAU_START */           FLAG_TYPE_OPTION,
  /* FLAG_IDA_MAXERRORTESTFAIL */         FLAG_TYPE_OPTION,
  /* FLAG_IDA_MAXNONLINITERS */           FLAG_TYPE_OPTION,
  /* FLAG_IDA_MAXCONVFAILS */             FLAG_TYPE_OPTION,
  /* FLAG_IDA_NONLINCONVCOEF */           FLAG_TYPE_OPTION,
  /* FLAG_IDA_LS */                       FLAG_TYPE_OPTION,
  /* FLAG_IDA_SCALING */                  FLAG_TYPE_FLAG,
  /* FLAG_IDAS */                         FLAG_TYPE_FLAG,
  /* FLAG_IGNORE_HIDERESULT */            FLAG_TYPE_FLAG,
  /* FLAG_IIF */                          FLAG_TYPE_OPTION,
  /* FLAG_IIM */                          FLAG_TYPE_OPTION,
  /* FLAG_IIT */                          FLAG_TYPE_OPTION,
  /* FLAG_ILS */                          FLAG_TYPE_OPTION,
  /* FLAG_IMPRK_LS */                     FLAG_TYPE_OPTION,
  /* FLAG_IMPRK_ORDER */                  FLAG_TYPE_OPTION,
  /* FLAG_INITIAL_STEP_SIZE */            FLAG_TYPE_OPTION,
  /* FLAG_INPUT_CSV */                    FLAG_TYPE_OPTION,
  /* FLAG_INPUT_FILE */                   FLAG_TYPE_OPTION,
  /* FLAG_INPUT_FILE_STATES */            FLAG_TYPE_OPTION,
  /* FLAG_INPUT_PATH */                   FLAG_TYPE_OPTION,
  /* FLAG_IPOPT_HESSE */                  FLAG_TYPE_OPTION,
  /* FLAG_IPOPT_INIT */                   FLAG_TYPE_OPTION,
  /* FLAG_IPOPT_JAC */                    FLAG_TYPE_OPTION,
  /* FLAG_IPOPT_MAX_ITER */               FLAG_TYPE_OPTION,
  /* FLAG_IPOPT_WARM_START */             FLAG_TYPE_OPTION,
  /* FLAG_JACOBIAN */                     FLAG_TYPE_OPTION,
  /* FLAG_JACOBIAN_THREADS */             FLAG_TYPE_OPTION,
  /* FLAG_L */                            FLAG_TYPE_OPTION,
  /* FLAG_L_DATA_RECOVERY */              FLAG_TYPE_FLAG,
  /* FLAG_LOG_FORMAT */                   FLAG_TYPE_OPTION,
  /* FLAG_LS */                           FLAG_TYPE_OPTION,
  /* FLAG_LS_IPOPT */                     FLAG_TYPE_OPTION,
  /* FLAG_LSS */                          FLAG_TYPE_OPTION,
  /* FLAG_LSS_MAX_DENSITY */              FLAG_TYPE_OPTION,
  /* FLAG_LSS_MIN_SIZE */                 FLAG_TYPE_OPTION,
  /* FLAG_LV */                           FLAG_TYPE_OPTION,
  /* FLAG_LV_TIME */                      FLAG_TYPE_OPTION,
  /* FLAG_MAX_BISECTION_ITERATIONS */     FLAG_TYPE_OPTION,
  /* FLAG_MAX_EVENT_ITERATIONS */         FLAG_TYPE_OPTION,
  /* FLAG_MAX_ORDER */                    FLAG_TYPE_OPTION,
  /* FLAG_MAX_STEP_SIZE */                FLAG_TYPE_OPTION,
  /* FLAG_MEASURETIMEPLOTFORMAT */        FLAG_TYPE_OPTION,
  /* FLAG_NEWTON_FTOL */                  FLAG_TYPE_OPTION,
  /* FLAG_NEWTON_MAX_STEP_FACTOR */       FLAG_TYPE_OPTION,
  /* FLAG_NEWTON_XTOL */                  FLAG_TYPE_OPTION,
  /* FLAG_NEWTON_STRATEGY */              FLAG_TYPE_OPTION,
  /* FLAG_NLS */                          FLAG_TYPE_OPTION,
  /* FLAG_NLS_INFO */                     FLAG_TYPE_FLAG,
  /* FLAG_NLS_LS */                       FLAG_TYPE_OPTION,
  /* FLAG_NLS_MAX_DENSITY */              FLAG_TYPE_OPTION,
  /* FLAG_NLS_MIN_SIZE */                 FLAG_TYPE_OPTION,
  /* FLAG_NOEMIT */                       FLAG_TYPE_FLAG,
  /* FLAG_NOEQUIDISTANT_GRID*/            FLAG_TYPE_FLAG,
  /* FLAG_NOEQUIDISTANT_OUT_FREQ*/        FLAG_TYPE_OPTION,
  /* FLAG_NOEQUIDISTANT_OUT_TIME*/        FLAG_TYPE_OPTION,
  /* FLAG_NO_RESTART */                   FLAG_TYPE_FLAG,
  /* FLAG_NO_ROOTFINDING */               FLAG_TYPE_FLAG,
  /* FLAG_NO_SCALING */                   FLAG_TYPE_FLAG,
  /* FLAG_NO_SUPPRESS_ALG */              FLAG_TYPE_FLAG,
  /* FLAG_NOEVENTEMIT */                  FLAG_TYPE_FLAG,
  /* FLAG_OPTDEBUGEJAC */                 FLAG_TYPE_OPTION,
  /* FLAG_OPTIZER_NP */                   FLAG_TYPE_OPTION,
  /* FLAG_OPTIZER_TGRID */                FLAG_TYPE_OPTION,
  /* FLAG_OUTPUT */                       FLAG_TYPE_OPTION,
  /* FLAG_OUTPUT_PATH */                  FLAG_TYPE_OPTION,
  /* FLAG_OVERRIDE */                     FLAG_TYPE_OPTION,
  /* FLAG_OVERRIDE_FILE */                FLAG_TYPE_OPTION,
  /* FLAG_PORT */                         FLAG_TYPE_OPTION,
  /* FLAG_R */                            FLAG_TYPE_OPTION,
  /* FLAG_DATA_RECONCILE */               FLAG_TYPE_FLAG,
  /* FLAG_RT */                           FLAG_TYPE_OPTION,
  /* FLAG_S */                            FLAG_TYPE_OPTION,
  /* FLAG_SINGLE */                       FLAG_TYPE_FLAG,
  /* FLAG_SOLVER_STEPS */                 FLAG_TYPE_FLAG,
  /* FLAG_STEADY_STATE */                 FLAG_TYPE_FLAG,
  /* FLAG_STEADY_STATE_TOL */             FLAG_TYPE_OPTION,
  /* FLAG_DATA_RECONCILE_Sx */            FLAG_TYPE_OPTION,
  /* FLAG_UP_HESSIAN */                   FLAG_TYPE_OPTION,
  /* FLAG_W */                            FLAG_TYPE_FLAG
};

const char *SOLVER_METHOD_NAME[S_MAX] = {
  /* S_UNKNOWN = 0 */   "unknown",
  /* S_EULER */         "euler",
  /* S_HEUN */          "heun",
  /* S_RUNGEKUTTA */    "rungekutta",
  /* S_IMPEULER */      "impeuler",
  /* S_TRAPEZOID */     "trapezoid",
  /* S_IMPRUNGEKUTTA */ "imprungekutta",
  /* S_IRKSCO */        "irksco",
  /* S_DASSL */         "dassl",
  /* S_IDA */           "ida",
  /* S_CVODE */         "cvode",
  /* S_ERKSSC */        "rungekuttaSsc",
  /* S_SYM_SOLVER */    "symSolver",
  /* S_SYM_SOLVER_SSC */"symSolverSsc",
  /* S_QSS */           "qss",
  /* S_OPTIMIZATION */  "optimization"
};

const char *SOLVER_METHOD_DESC[S_MAX] = {
  /* S_UNKNOWN = 0 */   "unknown",
  /* S_EULER */         "euler - Euler - explicit, fixed step size, order 1",
  /* S_HEUN */          "heun - Heun's method - explicit, fixed step, order 2",
  /* S_RUNGEKUTTA */    "rungekutta - classical Runge-Kutta - explicit, fixed step, order 4",
  /* S_IMPEULER */      "impeuler - Euler - implicit, fixed step size, order 1",
  /* S_TRAPEZOID */     "trapezoid - trapezoidal rule - implicit, fixed step size, order 2",
  /* S_IMPRUNGEKUTTA */ "imprungekutta - Runge-Kutta methods based on Radau and Lobatto IIA - implicit, fixed step size, order 1-6(selected manually by flag -impRKOrder)",
  /* S_IRKSCO */        "irksco - own developed Runge-Kutta solver - implicit, step size control, order 1-2",
  /* S_DASSL */         "dassl - default solver - BDF method - implicit, step size control, order 1-5",
  /* S_IDA */           "ida - SUNDIALS IDA solver - BDF method with sparse linear solver - implicit, step size control, order 1-5",
  /* S_CVODE */         "cvode - experimental implementation of SUNDIALS CVODE solver - BDF or Adams-Moulton method - step size control, order 1-12",
  /* S_ERKSSC */        "rungekuttaSsc - Runge-Kutta based on Novikov (2016) - explicit, step size control, order 4-5 [experimental]",
  /* S_SYM_SOLVER */     "symSolver - symbolic inline Solver [compiler flag +symSolver needed] - fixed step size, order 1",
  /* S_SYM_SOLVER_SSC */ "symSolverSsc - symbolic implicit Euler with step size control [compiler flag +symSolver needed] - step size control, order 1",
  /* S_QSS */           "qss - A QSS solver [experimental]",
  /* S_OPTIMIZATION */  "optimization - Special solver for dynamic optimization"
};

const char *INIT_METHOD_NAME[IIM_MAX] = {
  "unknown",
  "none",
  "symbolic"
};

const char *INIT_METHOD_DESC[IIM_MAX] = {
  "unknown",
  "sets all variables to their start values and skips the initialization process",
  "solves the initialization problem symbolically - default"
};

const char *LS_NAME[LS_MAX] = {
  "LS_UNKNOWN",

  /* LS_LAPACK */       "lapack",
#if !defined(OMC_MINIMAL_RUNTIME)
  /* LS_LIS */          "lis",
#else
  /* LS_LIS */          "lis-not-available",
#endif
  /* LS_KLU */          "klu",
  /* LS_UMFPACK */      "umfpack",
  /* LS_TOTALPIVOT */   "totalpivot",
  /* LS_DEFAULT */      "default"
};

const char *LS_DESC[LS_MAX] = {
  "unknown",

  /* LS_LAPACK */       "method using LAPACK LU factorization",
#if !defined(OMC_MINIMAL_RUNTIME)
  /* LS_LIS */          "method using iterative solver Lis",
#else
  /* LS_LIS */          "iterative solver Lis is not available",
#endif
  /* LS_KLU */          "method using KLU sparse linear solver",
  /* LS_UMFPACK */      "method using UMFPACK sparse linear solver",
  /* LS_TOTALPIVOT */   "method using a total pivoting LU factorization for underdetermination systems",
  /* LS_DEFAULT */      "default method - LAPACK with total pivoting as fallback"
};

const char *LSS_NAME[LSS_MAX] = {
  "LS_UNKNOWN",
  /* LSS_DEFAULT */     "default",
#if !defined(OMC_MINIMAL_RUNTIME)
  /* LSS_LIS */         "lis",
#else
  /* LSS_LIS */         "lis-not-available",
#endif
  /* LSS_KLU */         "klu",
  /* LSS_UMFPACK */     "umfpack"
};

const char *LSS_DESC[LSS_MAX] = {
  "unknown",
  /* LSS_DEFAULT */     "the default sparse linear solver (or a dense solver if there is none available) ",
#if !defined(OMC_MINIMAL_RUNTIME)
  /* LSS_LIS */         "method using iterative solver Lis",
#else
  /* LSS_LIS */         "iterative solver Lis not available",
#endif
  /* LSS_KLU */         "method using klu sparse linear solver",
  /* LSS_UMFPACK */     "method using umfpack sparse linear solver"
};

const char *NLS_NAME[NLS_MAX] = {
  "NLS_UNKNOWN",

#if !defined(OMC_MINIMAL_RUNTIME)
  /* NLS_HYBRID */       "hybrid",
  /* NLS_KINSOL */       "kinsol",
  /* NLS_NEWTON */       "newton",
  /* NLS_MIXED */        "mixed",
#else
  /* NLS_HYBRID */       "hybrid-not-available",
  /* NLS_KINSOL */       "kinsol-not-available",
  /* NLS_NEWTON */       "newton-not-available",
  /* NLS_MIXED */        "mixed-not-available",
#endif
  /* NLS_HOMOTOPY */     "homotopy"
};

const char *NLS_DESC[NLS_MAX] = {
  "unknown",

#if !defined(OMC_MINIMAL_RUNTIME)
  /* NLS_HYBRID */       "Modification of the Powell hybrid method from minpack - former default solver",
  /* NLS_KINSOL */       "SUNDIALS/KINSOL includes an interface to the sparse direct solver, KLU. See simulation option -nlsLS for more information.",
  /* NLS_NEWTON */       "Newton Raphson - prototype implementation",
  /* NLS_MIXED */        "Mixed strategy. First the homotopy solver is tried and then as fallback the hybrid solver.",
#else
  /* NLS_HYBRID */       "Modification of the Powell hybrid method from minpack - former default solver. Not available in minimal runtime.",
  /* NLS_KINSOL */       "SUNDIALS/KINSOL includes interface to the sparse direct solver, KLU. See simulation option -nlsLS for more information."
  /* NLS_NEWTON */       "Newton Raphson - prototype implementation. Not available in minimal runtime.",
  /* NLS_MIXED */        "Mixed strategy. First the homotopy solver is tried and then as fallback the hybrid solver. Not available in minimal runtime.",
#endif
  /* NLS_HOMOTOPY */     "Damped Newton solver if failing case fixed-point and Newton homotopies are tried."
};

const char *NEWTONSTRATEGY_NAME[NEWTON_MAX] = {
  "NEWTON_UNKNOWN",

  /* NEWTON_DAMPED */       "damped",
  /* NEWTON_DAMPED2 */      "damped2",
  /* NEWTON_DAMPED_LS */    "damped_ls",
  /* NEWTON_DAMPED_BT */    "damped_bt",
  /* NEWTON_PURE */         "pure"
};

const char *NEWTONSTRATEGY_DESC[NEWTON_MAX] = {
  "unknown",

  /* NEWTON_DAMPED */       "Newton with a damping strategy",
  /* NEWTON_DAMPED2 */      "Newton with a damping strategy 2",
  /* NEWTON_DAMPED_LS */    "Newton with a damping line search",
  /* NEWTON_DAMPED_BT */    "Newton with a damping backtracking and a minimum search via golden ratio method",
  /* NEWTON_PURE */         "Newton without damping strategy"
};


const char *JACOBIAN_METHOD[JAC_MAX] = {
  "unknown",

  "coloredNumerical",
  "internalNumerical",
  "coloredSymbolical",
  "numerical",
  "symbolical"
};

const char *JACOBIAN_METHOD_DESC[JAC_MAX] = {
  "unknown",

  "Colored numerical Jacobian, which is default for dassl and ida. With option -idaLS=klu a sparse matrix is used.",
  "Dense solver internal numerical Jacobian.",
  "Colored symbolical Jacobian. Needs omc compiler flag --generateSymbolicJacobian. With option -idaLS=klu a sparse matrix is used.",
  "Dense numerical Jacobian.",
  "Dense symbolical Jacobian. Needs omc compiler flag --generateSymbolicJacobian.",
 };

const char *IDA_LS_METHOD[IDA_LS_MAX] = {
  "unknown",

  "dense",
  "klu",
  "spgmr",
  "spbcg",
  "sptfqmr"
};

const char *IDA_LS_METHOD_DESC[IDA_LS_MAX] = {
  "unknown",

  "ida internal dense method.",
  "ida use sparse direct solver KLU. (default)",
  "ida generalized minimal residual method. Iterative method",
  "ida Bi-CGStab. Iterative method",
  "ida TFQMR. Iterative method"
};

const char *NLS_LS_METHOD[NLS_LS_MAX] = {
  "unknown",

  "default",
  "totalpivot",
  "lapack",
  "klu"
};

const char *NLS_LS_METHOD_DESC[NLS_LS_MAX] = {
  "unknown",

  "chooses the nls linear solver based on which nls is being used.",
  "internal total pivot implementation. Solve in some case even under-determined systems.",
  "use external LAPACK implementation.",
  "use KLU direct sparse solver. Only with KINSOL available."
};

const char *IMPRK_LS_METHOD[IMPRK_LS_MAX] = {
  "unknown",

  "iterative",
  "dense"
};

const char *IMPRK_LS_METHOD_DESC[IMPRK_LS_MAX] = {
  "unknown",

  "use sparse iterative solvers",
  "use direct dense method"
};

const char *HOM_BACK_STRAT_NAME[HOM_BACK_STRAT_MAX] = {
  "HOM_BACK_STRAT_UNKNOWN",

  /* HOM_BACK_STRAT_FIX */         "fix",
  /* HOM_BACK_STRAT_ORTHOGONAL */  "orthogonal"
};

const char *HOM_BACK_STRAT_DESC[HOM_BACK_STRAT_MAX] = {
  "unknown",

  /* HOM_BACK_STRAT_FIX */          "go back to the path by fixing one coordinate",
  /* HOM_BACK_STRAT_ORTHOGONAL */   "go back to the path in an orthogonal direction to the tangent vector"
};