Revert "Expected output"

This reverts commit 05b74d7.

flattening/modelica/modification/Bug3817.mos

@@ -763,6 +763,6 @@ simulate(PowerSystems.Examples.Spot.DrivesAC3ph.SM_ctrlAv); getErrorString();
 //     simulationOptions = "startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'PowerSystems.Examples.Spot.DrivesAC3ph.SM_ctrlAv', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
 //     messages = ""
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // endResult

openmodelica/cruntime/optimization/basic/TFC4.mos

@@ -64,7 +64,7 @@ getErrorString();
 // max_iter = -1"
 // end SimulationResult;
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

openmodelica/cruntime/optimization/basic/TFC7.mos

@@ -70,7 +70,7 @@ getErrorString();
 // "
 // end SimulationResult;
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

openmodelica/cruntime/optimization/basic/TFC8.mos

@@ -76,7 +76,7 @@ getErrorString();
 // "
 // end SimulationResult;
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

openmodelica/cruntime/optimization/basic/testAlgLoop3.mos

@@ -57,7 +57,7 @@ getErrorString();
 // LOG_IPOPT_ERROR   | info    | max violation is 1.53473e-09 for the constraint $EqCon$y1(time = 1)
 // "
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

openmodelica/cruntime/optimization/basic/testAlgLoop4.mos

@@ -61,7 +61,7 @@ getErrorString();
 // LOG_IPOPT_ERROR   | info    | max violation is 1.16403e-15 for the constraint $EqCon$y(time = 0.012899)
 // "
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

openmodelica/cruntime/optimization/basic/testAlgLoop6.mos

@@ -418,7 +418,7 @@ getErrorString();
 // "Notification: Following iteration variables are selected by the user for strong component 1 (DAE kind: initialization):
 //   x2:VARIABLE(min = -1.0 max = 1.0 )  type: Real
 // Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // Notification: Following iteration variables are selected by the user for strong component 2 (DAE kind: simulation):
 //   x2:VARIABLE(min = -1.0 max = 1.0 )  type: Real
 // "

openmodelica/cruntime/optimization/benchmark/runExReduceDrumBoiler.mos

@@ -39,7 +39,7 @@ getErrorString();
 // "
 // end SimulationResult;
 // true
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // record SimulationResult
 //     resultFile = "drumBoiler.optDrumBoiler_res.mat",

openmodelica/cruntime/simoptions/nlssMinSize.mos

@@ -21,6 +21,6 @@ simulate(M, simflags="-nlssMinSize=1"); getErrorString();
 //     messages = "stdout            | info    | Maximum system size for using non-linear sparse solver changed to 1
 // "
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // endResult

openmodelica/cruntime/xmlFiles/testxmlInfoAllEqnsCorrectOrder.mos

@@ -43,7 +43,7 @@ if 0<>system("sort -h testModel_info.json.filtered | diff - testModel_info.json.
 // ""
 // true
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // 0
 // "OK"

openmodelica/fmi/ModelExchange/1.0/CoupledClutches.mos

@@ -23,7 +23,7 @@ val(J4_w1, 1);
 // true
 // ""
 // "CoupledClutches.fmu"
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // "CoupledClutches_me_FMU.mo"
 // ""

openmodelica/fmi/ModelExchange/1.0/JuliansBib.mos

@@ -53,16 +53,16 @@ val(s, 1);
 // assert            | warning | Variable violating min constraint: 0.0 <= lever_arm_simple_2D1.ausleger1.fixedTranslation.r0[2], has value: -0.0885635
 // "
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // 127.2093118472222
-// -1.473673372206885
+// -1.473673372206996
 // 12720.93118472221
-// -2.525849023131421
+// -2.525849023135152
 // 0.0
-// -0.5326917977051209
+// -0.5326917977050821
 // "JuliansBib_Connector_Hebelarm_einfach.fmu"
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // "JuliansBib_Connector_Hebelarm_einfach_me_FMU.mo"
 // ""
@@ -96,9 +96,9 @@ val(s, 1);
 // [openmodelica/fmi/ModelExchange/1.0/JuliansBib_Connector_Hebelarm_einfach_me_FMU.mo:688:3-688:216:writable] Warning: Parameter lever_arm_simple_2D1_fixedTranslation1_cylinder_shapeType has no value, and is fixed during initialization (fixed=true), using available start value (start="cylinder") as default value.
 // "
 // 29.87032083226751
-// -2.843354040232149
+// -2.843354040235502
 // 2987.032083226751
-// -1.18046718501934
+// -1.180467185279577
 // 0.0
-// 2.726903938446021
+// 2.726903938445559
 // endResult

openmodelica/linearization/test_06.mos

@@ -46,7 +46,7 @@ readFile("linear_simple__test.log"); // Check that output log is empty
 // "
 // end SimulationResult;
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // true
 // ""
@@ -88,7 +88,7 @@ readFile("linear_simple__test.log"); // Check that output log is empty
 // "
 // end SimulationResult;
 // "Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // true
 // record SimulationResult

openmodelica/xml/Bug3857.mos

@@ -23,7 +23,7 @@ readFile("Bug3857.xml"); getErrorString();
 // true
 // ""
 // true
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // true
 // ""
@@ -1554,7 +1554,7 @@ readFile("Bug3857.xml"); getErrorString();
 //     </ScalarVariable> 
 //
 //     <ScalarVariable name=\"driveAngle\" description=\"Reference distance to move\" valueReference=\"118\" variability=\"parameter\" causality=\"internal\" alias=\"noAlias\">
-//       <Real start=\"1.570796326794897\" fixed=\"true\"   unit=\"rad\" displayUnit=\"deg\"/>
+//       <Real start=\"1.57\" fixed=\"true\"   unit=\"rad\" displayUnit=\"deg\"/>
 //       <QualifiedName>
 //         <exp:QualifiedNamePart name=\"driveAngle\"/>
 //       </QualifiedName>
@@ -2279,7 +2279,7 @@ readFile("Bug3857.xml"); getErrorString();
 //         <exp:QualifiedNamePart name=\"driveAngle\"/>
 //       </equ:Parameter>
 //       <equ:BindingExp>
-//         <exp:RealLiteral>1.570796326794897</exp:RealLiteral>
+//         <exp:RealLiteral>1.57</exp:RealLiteral>
 //       </equ:BindingExp>
 //     </equ:BindingEquation>
 //

simulation/libraries/3rdParty/DrModelica/DrModelicaForTesting.Circuit.mos

@@ -30,7 +30,7 @@ res := OpenModelica.Scripting.compareSimulationResults("DrModelicaForTesting.Cir
 // "[Modelica 3.1/Electrical/Analog/Basic.mo:68:3-69:40:writable] Warning: Parameter R1.R has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
 // [Modelica 3.1/Electrical/Analog/Sources.mo:359:5-359:61:writable] Warning: Parameter src.V has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
 // [Modelica 3.1/Electrical/Analog/Sources.mo:361:5-361:68:writable] Warning: Parameter src.freqHz has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // endResult

simulation/libraries/3rdParty/GitLibraries/WasteWater.ASM1.Examples.SmallPlant.mos

@@ -51,7 +51,7 @@ getErrorString();
 // [WasteWater 2.1.0/ASM1/Interfaces.mo:7:3-45:19:writable] Warning: Connector .WasteWater.ASM1.Interfaces.WWFlowAsm1in is not balanced: The number of potential variables (13) is not equal to the number of flow variables (1).
 // [Modelica 3.2.1/Blocks/Sources.mo:239:5-239:54:writable] Warning: Parameter Constant1.k has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
 // [Modelica 3.2.1/Blocks/Sources.mo:239:5-239:54:writable] Warning: Parameter Constant2.k has no value, and is fixed during initialization (fixed=true), using available start value (start=1.0) as default value.
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // (true,{})
 // ""

simulation/libraries/3rdParty/HumMod/buildHumModOMC.mos

@@ -21,6 +21,6 @@ buildModel(HumModTest); getErrorString();
 // Notification: Automatically loaded package Complex 3.2.1 due to uses annotation.
 // Notification: Automatically loaded package ModelicaServices 3.2.1 due to uses annotation.
 // Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
-// Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // endResult

simulation/libraries/3rdParty/PNlib/Test11.mos

@@ -27,7 +27,7 @@ res := OpenModelica.Scripting.compareSimulationResults("PNlib.Examples.Test11_re
 //     simulationOptions = "startTime = 0.0, stopTime = 2.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'PNlib.Examples.Test11', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
 //     messages = ""
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.

simulation/libraries/3rdParty/PNlib/Test12.mos

@@ -30,7 +30,7 @@ res := OpenModelica.Scripting.compareSimulationResults("PNlib.Examples.Test12_re
 //     simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'PNlib.Examples.Test12', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
 //     messages = ""
 // end SimulationResult;
-// "Warning: There are iteration variables with default zero start attribute or nominal value as start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
+// "Warning: There are iteration variables with default zero start attribute. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 // "
 // {"Files Equal!"}
 // "Warning: 'compareSimulationResults' is deprecated. It is recommended to use 'diffSimulationResults' instead.