/
iblindsV3.xml
71 lines (70 loc) · 3.94 KB
/
iblindsV3.xml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
<Product Revision="1" xmlns="https://github.com/OpenZWave/open-zwave">
<MetaData>
<MetaDataItem name="Name">iblinds</MetaDataItem>
<MetaDataItem name="Description">An intelligent blind motor, a Z-Wave device designed for tilting Venetian (two inch slatted-style) blinds. Open and close the blinds and use a value slider for precise positioning of the tilt angle.</MetaDataItem>
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0287:0071:0004</MetaDataItem>
<MetaDataItem name="ProductPage">https://myiblinds.com/</MetaDataItem>
<MetaDataItem name="ProductSupport">https://support.myiblinds.com</MetaDataItem>
<MetaDataItem name="ProductPic">images/iblinds/iblindsV3.png</MetaDataItem>
<MetaDataItem name="ProductManual">http://support.myiblinds.com/wp-content/uploads/2019/06/User-Guide-v1.0.pdf</MetaDataItem>
<MetaDataItem name="WakeupDescription">Press Include/Exclude button</MetaDataItem>
<MetaDataItem name="InclusionDescription">Follow the directions for your Z-Wave hub/controller to place it into inclusion mode. Press the inclusion button three times and wait for the device to be discovered and joined to the Z-Wave network.</MetaDataItem>
<MetaDataItem name="ExclusionDescription">Follow the directions for your Z-Wave device to place it in the exclusion mode. Press the exclude button three times and wait for the device to be removed from the Z-Wave network.</MetaDataItem>
<MetaDataItem name="ResetDescription">Charge adapter button can be used to reset the device and perform manual auto calibration: press and hold the Charge Adapter button for 10 seconds.</MetaDataItem>
<MetaDataItem id="0071" name="ZWProductPage" type="0004">https://products.z-wavealliance.org/products/2486/features</MetaDataItem>
<MetaDataItem id="0071" name="FrequencyName" type="0004">U.S. / Canada/ Mexico</MetaDataItem>
<MetaDataItem id="0071" name="FrequencyName" type="0004">CEPT</MetaDataItem>
<MetaDataItem id="0071" name="FrequencyName" type="0004">Australia / New Zealand</MetaDataItem>
<MetaDataItem id="0071" name="Identifier" type="0004">iblinds V3</MetaDataItem>
<!--TODO : Change Frequency to represent Global with new ZWave 700 Series-->
<ChangeLog>
<Entry author="Chance Huddleston chance@habhomeintel.com" date="8 Sept 2020" revision="1">Initial Release</Entry>
</ChangeLog>
</MetaData>
<!-- Configuration Parameters -->
<CommandClass id="112">
<Value genre="config" type="byte" size="1" index="1" label="Close Interval" min="16" max="32" value="22">
<Help>
Auto Calibration Tightness
Lower value = tighter
Higher value = looser
MUST BE RECALIBRATED
Range:16-32
Default: 22
</Help>
</Value>
<Value genre="config" type="list" size="1" index="2" label="Reverse Direction" min="0" max="1" value="0">
<Help>
Reverse closing direction
</Help>
<Item value="0" label="False"/>
<Item value="1" label="True"/>
</Value>
<!--The 3rd Index Configuration Parameter is not used, DO NOT ADD-->
<Value genre="config" type="byte" size="1" index="4" label="Default ON Value" min="0" max="100" value="50">
<Help>
Value that iblinds will open to by Default
Default: 50
</Help>
</Value>
<Value genre="config" type="list" size="1" index="5" label="Reset Button Disable" min="0" max="1" value="0">
<Help>
Will disable the reset button on the motor, preventing it from accidentally being pressed
</Help>
<Item value="0" label="False"/>
<Item value="1" label="True"/>
</Value>
<Value genre="config" type="byte" size="1" index="6" label="Speed" min="0" max="100" value="0">
<Help>
How fast iblinds will close in seconds
Default:0
</Help>
</Value>
</CommandClass>
<!-- Association Groups -->
<CommandClass id="133">
<Associations num_groups="1">
<Group index="1" label="Lifeline" max_associations="1" />
</Associations>
</CommandClass>
</Product>