rotationtest.ino

/***************************************************
  This is an example sketch for the Adafruit 1.8" SPI display.

This library works with the Adafruit 1.8" TFT Breakout w/SD card
  ----> http://www.adafruit.com/products/358
The 1.8" TFT shield
  ----> https://www.adafruit.com/product/802
The 1.44" TFT breakout
  ----> https://www.adafruit.com/product/2088
as well as Adafruit raw 1.8" TFT display
  ----> http://www.adafruit.com/products/618

  Check out the links above for our tutorials and wiring diagrams
  These displays use SPI to communicate, 4 or 5 pins are required to
  interface (RST is optional)
  Adafruit invests time and resources providing this open source code,
  please support Adafruit and open-source hardware by purchasing
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.
  MIT license, all text above must be included in any redistribution
 ****************************************************/

// This Teensy3 native optimized version requires specific pins
//
#define TFT_SCLK 13  // SCLK can also use pin 14
#define TFT_MOSI 11  // MOSI can also use pin 7
#define TFT_CS   10  // CS & DC can use pins 2, 6, 9, 10, 15, 20, 21, 22, 23
#define TFT_DC    9  //  but certain pairs must NOT be used: 2+10, 6+9, 20+23, 21+22
#define TFT_RST   8  // RST can use any pin
#define SD_CS     4  // CS for SD card, can use any pin

#include <Adafruit_GFX.h>    // Core graphics library
#include <ST7735_t3.h> // Hardware-specific library
#include <SPI.h>

ST7735_t3 tft = ST7735_t3(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST);

void setup(void) {
  pinMode(SD_CS, INPUT_PULLUP);  // keep SD CS high when not using SD card
  Serial.begin(9600);
  Serial.print("hello!");

  // Use this initializer if you're using a 1.8" TFT
  tft.initR(INITR_BLACKTAB);
  // Use this initializer (uncomment) if you're using a 1.44" TFT
  //tft.initR(INITR_144GREENTAB);

  Serial.println("init");

  tft.setTextWrap(false); // Allow text to run off right edge
  tft.fillScreen(ST7735_BLACK);

  Serial.println("This is a test of the rotation capabilities of the TFT library!");
  Serial.println("Press <SEND> (or type a character) to advance");
}

void loop(void) {
  rotateLine();
  rotateText();
  rotatePixel();
  rotateFastline();
  rotateDrawrect();
  rotateFillrect();
  rotateDrawcircle();
  rotateFillcircle();
  rotateTriangle();
  rotateFillTriangle();
  rotateRoundRect();
  rotateFillRoundRect();
  rotateChar();
  rotateString();
}

void rotateText() {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.setCursor(0, 30);
    tft.setTextColor(ST7735_RED);
    tft.setTextSize(1);
    tft.println("Hello World!");
    tft.setTextColor(ST7735_YELLOW);
    tft.setTextSize(2);
    tft.println("Hello World!");
    tft.setTextColor(ST7735_GREEN);
    tft.setTextSize(3);
    tft.println("Hello World!");
    tft.setTextColor(ST7735_BLUE);
    tft.setTextSize(4);
    tft.print(1234.567);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateFillcircle(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.fillCircle(10, 30, 10, ST7735_YELLOW);

    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateDrawcircle(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawCircle(10, 30, 10, ST7735_YELLOW);

    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateFillrect(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.fillRect(10, 20, 10, 20, ST7735_GREEN);

    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateDrawrect(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawRect(10, 20, 10, 20, ST7735_GREEN);

    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateFastline(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawFastHLine(0, 20, tft.width(), ST7735_RED);
    tft.drawFastVLine(20, 0, tft.height(), ST7735_BLUE);

    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateLine(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawLine(tft.width()/2, tft.height()/2, 0, 0, ST7735_RED);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotatePixel(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawPixel(10,20, ST7735_WHITE);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateTriangle(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawTriangle(20, 10, 10, 30, 30, 30, ST7735_GREEN);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateFillTriangle(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.fillTriangle(20, 10, 10, 30, 30, 30, ST7735_RED);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateRoundRect(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawRoundRect(20, 10, 25, 15, 5, ST7735_BLUE);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateFillRoundRect(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.fillRoundRect(20, 10, 25, 15, 5, ST7735_CYAN);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateChar(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.drawChar(25, 15, 'A', ST7735_WHITE, ST7735_WHITE, 1);
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}

void rotateString(void) {
  for (uint8_t i=0; i<4; i++) {
    tft.fillScreen(ST7735_BLACK);
    Serial.println(tft.getRotation(), DEC);

    tft.setCursor(8, 25);
    tft.setTextSize(1);
    tft.setTextColor(ST7735_WHITE);
    tft.print("Adafruit Industries");
    while (!Serial.available());
    Serial.read();  Serial.read();  Serial.read();

    tft.setRotation(tft.getRotation()+1);
  }
}