Skip to content

Latest commit

 

History

History
135 lines (100 loc) · 5.06 KB

grus.md

File metadata and controls

135 lines (100 loc) · 5.06 KB
Raw

Installation Guide For Project Elixir

Installation Guide For Project Elixir on Xiaomi MI 9 SE (grus)

Warning

  • Your warranty is void. Or valid, probably?
  • Project Elixir is not responsible for any damage you made to your device. You have been warned!
  • We are not responsible for anything that may happen to your phone by installing custom ROMs.
  • We are not responsible for anything that may happen to your phone by installing any kernels.
  • You do it at your own risk and take the responsibility upon yourself
  • You are not to blame Project Elixir or its respected developers for any of your loss.

Basic Notes for all users:

  • The provided instructions are for Project Elixir based on Android 14.
  • These will only work if you follow every section and step precisely
  • Do not continue after something fails! Contact in support group for help
  • The device must have an unlocked bootloader & has Platform Tools installed in pc.
  • If you are moving from any other Android version to Android 14, it is necessary to do CLEAN FLASH (Format Data)
  • Take a backup for safe side (If you are coming from older Android version or doing a clean flash)
  • For any queries or help related to Elixir, join our support group : Tap Here

Note:

  • The device must have an unlocked bootloader. If you are moving from Android 13 to Android 14, it is necessary CLEAN FLASH (Format Data).

Step 1: Download Required Files

  1. Download the latest Android platform tools for Windows from the link below:

  2. Download the Recovery from the link below:

  3. Download the Project Elixir ROM for Xiaomi MI 9 SE aka Grus from a reliable source.

Step 2: Install ADB and Boot into Fastboot Mode

  1. Make sure you have ADB (Android Debug Bridge) installed on your computer.

  2. Extract the downloaded platform-tools zip file on your computer.

  3. Connect your device to your computer using a USB cable.

  4. Open a command prompt (Windows) or terminal (macOS and Linux) on your computer.

  5. Navigate to the location where you extracted the platform-tools.

  6. Enter the following command to check if your device is connected and detected by ADB:

adb devices

If your device is listed, proceed to the next step. If not, make sure your device is connected properly and that USB debugging is enabled in the developer options.

  1. Now, reboot your device into Fastboot Mode using the following command:
adb reboot bootloader

Step 3: Flash TWRP Recovery using Fastboot

  1. Once your device is in Fastboot Mode, use the following command to check if Fastboot still detects your device:
fastboot devices

If your device is listed, you are ready to flash the TWRP Recovery.

  1. Download the TWRP Recovery from the link provided in Step 1.

  2. Place the downloaded TWRP Recovery image (.img file) in the same location as the platform-tools folder on your computer.

  3. Now, flash the TWRP Recovery using the following command:

fastboot flash recovery recovery_file_name.img

Replace recovery_file_name.img with the actual name of the TWRP Recovery image you downloaded if needed.

  1. After flashing the recovery, reboot your Recovery

Step 4: Wipe Data

  1. In TWRP Recovery, use the touch screen or physical buttons to navigate.

  2. Select "Wipe" from the main menu.

  3. Wipe Data and Davlik & cache and then proceed to format data by typing yes. And reboot to recovery again.

Step 5: Flash Project Elixir ROM

  1. Then copy the Project Elixir ROM file to Internal storage or use OTG/SD card
  2. In the main menu in recovery.
  3. Select "Install."
  4. Navigate to the location where you downloaded the Project Elixir ROM.
  5. Select the ROM file and swipe the slider to confirm the installation.
  6. After insatlling successfully reboot to system.

Clean Flash

- Download the latest build
- Take a backup for safe side
- Boot to Recovery - must use A14 recovery - link below
- Format Data
- Flash the Firmware
- Flash the latest build
- Reboot

Dirty Flashing Steps

Encryption to Encryption :

1. Download the Latest Build
2. Boot to A14 recovery
3. Flash ROM zip
4. Clear Dalvik and Cache in advance wipe
5. Reboot

DIRTY FLASH WHEN YOU ARE DECRYPTED [A14 to A14]

1. Download the Latest Build
2. Boot to A14 recovery
3. Clear Dalvik and Cache in advance wipe
3. Flash ROM zip
4. Reboot

Note:

  • A14 recovery: Tap here for link
  • Firmware : Tap Here for link
  • If you are coming from other ROMs = Format Data and flash firmware
  • If you are coming from A13 to A14 then clean flash is compulsory and format data.
  • If you are encrypted do format Data before flashing build to avoid bugs.