Skip to content

Latest commit

 

History

History
405 lines (250 loc) · 23.4 KB

NEW_CMDLETS.md

File metadata and controls

405 lines (250 loc) · 23.4 KB
Raw

Create new cmdlet topics

Cmdlet reference topics follow a very strict schema that's difficult to duplicate manually (remember, the topics on the web are also used for Get-Help from the command line). Instead, you use the open-source platyPS tool to export the cmdlet and all of its properties to a markdown (.md) file from your PowerShell connection to the server or service.

Step 1: Install platyPS

If you're running Windows 10 or Windows Server 2016, you already have Windows PowerShell 5.x installed, so installing platyPS is easy.

Run the following command in an elevated Windows PowerShell window (a Windows PowerShell window you open by selecting Run as administrator):

Install-Module -Name platyPS -Scope CurrentUser

Notes:

  • You need platyPS v0.11.1 or later, released on or about September 13, 2018. If you have an earlier version of platyPS installed, close all open Windows PowerShell windows where the platyPS module is currently loaded (or run the command Remove-Module platyPS) and then run Update-Module platyPS from an elevated Windows PowerShell window.

  • Windows PowerShell 5.x is part of the Windows Management Framework (WMF) and can be downloaded and installed on these versions of Windows:

    • Windows Server 2012 R2

    • Windows Server 2012

    • Windows Server 2008 R2 SP1

    • Windows 8.1

    • Windows 7

    If you need to install platyPS on an older version of Windows (for example, a server running a product that lacks support for WMF 5.x or its requirements), see the Install platyPS on older versions of Windows section at the end of this topic.

Step 2: Connect to the PowerShell environment that has the cmdlet

You probably know how to do this already, but the available workloads and connection methods are:

Notes:

  • You might need to connect to the service in an elevated Windows PowerShell prompt (required for Skype for Business Online and Teams, but not Exchange). The connection instructions topic should contain this and other connection requirements.

  • In Exchange environments, the cmdlets available to you are controlled by role-based access control (RBAC). Most cmdlets and parameters are available to administrators by default, but some aren't (for example, the "Mailbox Search" and "Mailbox Import Export" roles).

Step 3: Load platyPS in the PowerShell environment

After you've connected in PowerShell to the server or service (either in a regular Windows PowerShell window or from a specific PowerShell console shortcut), run the following command to make the platyPS cmdlets available in your session:

Import-Module platyPS

Step 4: Find your module name

Note: This step is required only if you're interested in creating cmdlet reference topics for all available cmdlets in your product (the Module parameter in New-MarkdownHelp). If you're going to manually specify the cmdlet names (the Command parameter in New-MarkdownHelp), you can skip this step.

platyPS needs the name of the loaded PowerShell module or snap-in that contains the cmdlets you want to update. To find the name, run the following command:

Get-Module | Format-Table -Auto

The command returns all of the currently loaded modules or snap-ins, and the output will resemble this:

ModuleType Version    Name                                ExportedCommands
---------- -------    ----                                ----------------
Manifest   3.1.0.0    Microsoft.PowerShell.Management     {Add-Computer, Add-Content, Checkpoint-Computer, Clear-Con...
Manifest   3.0.0.0    Microsoft.PowerShell.Security       {ConvertFrom-SecureString, ConvertTo-SecureString, Get-Acl...
Manifest   3.1.0.0    Microsoft.PowerShell.Utility        {Add-Member, Add-Type, Clear-Variable, Compare-Object...}
Binary     1.0.0.1    PackageManagement                   {Find-Package, Find-PackageProvider, Get-Package, Get-Pack...
Script     0.10.0     platyps                             {Get-HelpPreview, Get-MarkdownMetadata, Merge-MarkdownHelp...
Script     1.0.0.1    PowerShellGet                       {Find-Command, Find-DscResource, Find-Module, Find-RoleCap...
Script     1.2        PSReadline                          {Get-PSReadlineKeyHandler, Get-PSReadlineOption, Remove-PS...
Script     1.0        tmp_byivwzpq.e1k                    {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...

or this:

ModuleType Version     Name                                   ExportedCommands
---------- -------     ----                                   ----------------
Binary     16.0.7723.0 Microsoft.Online.SharePoint.PowerShell {Add-SPOGeoAdministrator, Add-SPOHubSiteAssociation, A...
Manifest   3.1.0.0     Microsoft.PowerShell.Management        {Add-Computer, Add-Content, Checkpoint-Computer, Clear...
Manifest   3.0.0.0     Microsoft.PowerShell.Security          {ConvertFrom-SecureString, ConvertTo-SecureString, Get...
Manifest   3.1.0.0     Microsoft.PowerShell.Utility           {Add-Member, Add-Type, Clear-Variable, Compare-Object...}
Script     1.2         PSReadline                             {Get-PSReadlineKeyHandler, Get-PSReadlineOption, Remov...

For services that use remote PowerShell (Skype for Business Online, Teams, Exchange Online, Security & Compliance Center, and Exchange Online Protection), the module name is a temporary value that changes every time you connect. In this output, the module name is tmp_byivwzpq.e1k, but yours will be different.

For SharePoint Online in the SharePoint Online Management Shell, the module name is always Microsoft.Online.SharePoint.PowerShell.

Either way, take note of your module name. You'll need it in the next steps.

Step 5: Verify your PSSession variable name

Note: This step is required in Exchange, Skype for Business Online and other products that use remote PowerShell in their connection instructions (one or more xxx-xxxSession commands are present). If you're using SharePoint, SharePoint Online or another product that doesn't use remote PowerShell, you can skip this step.

Check the details of your connection instructions, but your session information is stored in a variable. For example, in the Exchange connection instructions, the variable is $Session. You'll use this variable name in later steps.

If you connected via a custom script or your remote PowerShell session variable isn't apparent, do the following steps:

  1. Run the following command to find your session:

    Get-PSSession | Format-Table -Auto

    The output will resemble this:

    Id Name   ComputerName          ComputerType  State  ConfigurationName  Availability
-- ----   ------------          ------------  -----  -----------------  ------------
 1 WinRM1 outlook.office365.com RemoteMachine Opened Microsoft.Exchange    Available

    or this:

    Id Name   ComputerName            ComputerType  State  ConfigurationName    Availability
-- ----   ------------            ------------  -----  -----------------    ------------
 1 WinRM1 admin2a.online.lync.com RemoteMachine Opened Microsoft.PowerShell    Available

    Note: If you see multiple sessions, either start over in a new PowerShell window or confirm the session you want to use. The first connection is 1, the second is 2, and so on.

  2. Use the following syntax to store the session in a variable:

    $<VariableName> = Get-PSSession <SessionID>

    For example, using the sample output in the previous step:

    $Session = Get-PSSession 1

    The variable name you choose doesn't matter, but you'll use it in later steps.

Step 6: Run platyPS to generate topic files

You have two choices:

  • Dump all cmdlets in the module/snap-in to files: This is simple but could take a while, and you'll end up with dozens or possibly hundreds of cmdlets files you don't need. The basic syntax is:

    New-MarkdownHelp -Module <ModuleName> -OutputFolder "<Path"> [-Session <PSSessionVariableName>]

  • Dump specific cmdlets to files: This is a bit harder to set up, but the output is much quicker, and there are no extra topic files created. The basic syntax is:

    New-MarkdownHelp -Command <Cmdlet> -OutputFolder "<Path"> [-Session <PSSessionVariableName>]

    or

    $x = "<Cmdlet1>","<Cmdlet2>",..."<CmdletN>"
New-MarkdownHelp -Command $x -OutputFolder "<Path"> [-Session <PSSessionVariableName>]

Notes:

  • <ModuleName> is the value you found in Step 4 (for example, tmp_byivwzpq.e1k or Microsoft.Online.SharePoint.PowerShell).

  • <PSSessionVariableName> is the remote PowerShell session variable from Step 5 (for example, $Session) and is required only if the connection instructions used remote PowerShell (one or more xxx-xxxSession commands).

    Failure to use the Session parameter in remote PowerShell environments leads to weird results: multiple syntax blocks/parameter sets aren't recognized and are collapsed into one big block, the Type value is Object for all parameters, the Required value is False for all parameters, etc.

  • If the <Path> location doesn't exist, it's created for you.

Dump all cmdlets in the module/snap-in to files

This example creates topic files for all available cmdlets in the Skype for Business Online PowerShell session where the module is tmp_byivwzpq.e1k and the session variable is $Session in the folder C:\My Docs\SfBO.

New-MarkdownHelp -Module tmp_byivwzpq.e1k -OutputFolder "C:\My Docs\SfBO" -Session $Session

Dump specific cmdlets to files

This example creates a topic file for the cmdlet named Get-CoolFeature in the Exchange Online PowerShell session where the session variable is $Session in the folder "C:\My Docs\ExO".

New-MarkdownHelp -Command "Get-CoolFeature" -OutputFolder "C:\My Docs\ExO" -Session $Session

This example creates topic files for the Get-CoolFeature, New-CoolFeature, Remove-CoolFeature, and Set-CoolFeature cmdlets from the Exchange Online session where the session variable is $Session in the folder C:\My Docs\ExO.

The first command stores the cmdlet names in a variable. The second command uses that variable to identify the cmdlets and write the output files.

$NewCmdlets = "Get-CoolFeature","New-CoolFeature","Remove-CoolFeature","Set-CoolFeature"

New-MarkdownHelp -Command $NewCmdlets -OutputFolder "C:\My Docs\ExO" -Session $Session

Step 7: Document the new cmdlet

Now that you have topic files for the new cmdets, you can actually document them. The topics are plain text UTF-8 files that are formatted using markdown. Office writers use Visual Studio Code to edit topic files, but you can use Notepad or your favorite text editor.

These are the basic topic elements that require your attention, regardless of the product or service:

  • The SYNOPSIS section: Be brief. Use the DESCRIPTION section for less critical information.

  • The DESCRIPTION section: More details (for example, permissions required to run the cmdlet)

  • One or more code examples in the EXAMPLES section: The code block (only one code block) goes first, then the description text.

  • A description for every parameter in each parameter section

We highly encourage you to plagiarize existing content and formatting from other cmdlet topics in the product or service. Many parameters are common across a wide variety of cmdlets.

Metadata in the new cmdlet

Less obvious but still important information that's often manually required in every topic is cmdlet metadata at the top of the topic and parameter metadata in every parameter section.

Cmdlet metadata

Every cmdlet reference topic needs at least the following in the metadata field at the top of the reference article:

external help file: Microsoft.OutlookApps.StaffHub.PowershellCmdlets.dll-Help.xml
Module Name: Microsoft.OutlookApps.StaffHub.PowershellCmdlets
applicable: Skype for Business Server 2015
title: Add-CsSlaDelegates
author:
ms.author:
ms.reviewer:
manager:
schema: 2.0.0

  • external help file: Defines which MAML/XML file the cmdlet help topic goes in for Get-Help at the command line. This value very product-specific, and the location is specified somewhere in product code. Some products (Skype) use only one XML file that's well-known and the same for all cmdlets; others (Exchange, SharePoint) use multiple XML files. See other topics for available values. Don't guess; a wrong value here will affect the availability of the help topic at the command line.

  • Module Name: Not used in Exchange topics (remove it). For other products, this is the module name of the product.

  • online version: Empty, but needs to be present.

  • applicable: You need to add this attribute and value yourself. Notice that it starts with a lowercase 'a'. See other topics for available values. Don't invent new values here. The value must come from the list of predefined values.

  • title: You need to add this attribute and value yourself. This is simply the name of the cmdlet.

  • schema: This value is always 2.0.0 in all products.

  • author: The GitHub alias of the person that owns this topic. Usually the PM or sometimes a dev that owns the cmdlet.

  • ms.author: The Microsoft alias of the same author.

  • ms.reviewer: The Microsoft alias of someone that can approve any technical changes (if different than the author).

  • manager: The Microsoft alias of a manager for the team that owns the cmdlet. This is useful if the person that owns the cmdlet leaves the company. The manager will be reached to in order to find the new author.

Parameter metadata

Here's an example of the parameter metadata that's present in every parameter section:

```yaml
Type: String
Parameter Sets: (All)
Aliases:
Applicable: Microsoft StaffHub
Required: False
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
```

Most of the attributes and values are generated automatically by platyPS. The ones that require manual intervention are:

  • Applicable: You need to add this attribute and value yourself. Notice the capital 'A'. See other topics for available values (same available values as the applicable attribute at the top of the topic). Don't invent new values here. The value must come from the list of predefined values.

  • Default value and Accept wildcard characters: These attributes are present, but the values are never truthfully populated by platyPS (they're always None and False, respectively). You can correct the values if you think it's important. Otherwise, leave them as is.

Step 8: Add the new cmdlet topic files to the repository

When you're done editing the topics, upload them to GitHub. Note that you need to fork, upload your files to your fork, then submit a Pull Request.

  1. Go to the correct location in the appropriate GitHub repository:

  2. Click Upload files

    Upload file

  3. After you're done adding files, go to the Propose file change area at the bottom of the page. Enter a title and optional description information and then click Propose file change.

  4. On the next screen, click Create pull request.

Step 9: Add the new cmdlets to the TOC file.

Note: This step isn't required for Exchange or SharePoint PNP, because there is no TOC file.

Add the cmdlet to Table of Contents (TOC) file in the GitHub repo. TOC file is the name of the module. For example:

In the TOC file, you can fill in a description or remove the template text line. However, if you leave the template text line make sure it's in exactly the right format so it won't render as a template text.

After you're done editing the TOC file:

  1. Go to the Propose file change area at the bottom of the page. Enter a title and optional description information and then click Propose file change.

  2. On the next screen, click Create pull request.

Appendix

Reference

Install platyPS on older versions of Windows

Note: These procedures aren't required on Windows 10, Windows Server 2016, or other versions of Windows where the WMF 5.x is already installed.

  1. Download and install PowerShellGet.

  2. From an elevated Windows PowerShell window, run the following command:

    Save-Module PowerShellGet -Path "<TargetPath>"

    Where <TargetPath> is a location that's easy to find (for example, C:\Temp\PSG).

    Notes:

    • The target folder/path must already exist.

    • The command will create two new folders in the target path:

      • PackageManagement

      • PowerShellGet

  3. Delete the following folders from your computer or move them to a remote location for safekeeping:

    • C:\Program Files\WindowsPowerShell\Modules\PackageManagement

    • C:\Program Files\WindowsPowerShell\Modules\PowerShellGet

  4. In Windows Explorer, copy the PackageManagement and PowerShellGet folders FROM <TargetPath> TO C:\Program Files\WindowsPowerShell\Modules\ (replacing the folders you deleted in Step 3 with the new ones you downloaded in Step 2).

    You should now have the following folders again:

    • C:\Program Files\WindowsPowerShell\Modules\PackageManagement

    • C:\Program Files\WindowsPowerShell\Modules\PowerShellGet

  5. From an elevated Windows PowerShell window, run the following command:

    Set-PSRepository -Name PSGallery -InstallationPolicy Trusted

  6. Now you can finally install platyPS by running the following command:

    Install-Module -Name platyPS -Scope CurrentUser