forked from repetier/Repetier-Firmware
/
HAL.cpp
1465 lines (1204 loc) · 51 KB
/
HAL.cpp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
This file is part of the Repetier-Firmware for RF devices from Conrad Electronic SE.
Repetier-Firmware is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Repetier-Firmware is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Repetier-Firmware. If not, see <http://www.gnu.org/licenses/>.
*/
#include "Repetier.h"
#include <compat/twi.h>
#if FEATURE_WATCHDOG
unsigned char g_bPingWatchdog = 0;
#endif // FEATURE_WATCHDOG
HAL::HAL()
{
} // HAL
HAL::~HAL()
{
} // ~HAL
uint16_t HAL::integerSqrt(long a)
{
// http://www.mikrocontroller.net/articles/AVR_Arithmetik#32_Bit_.2F_32_Bit
//-----------------------------------------------------------
// Fast and short 32 bits AVR sqrt routine, avr-gcc ABI compliant
// R25:R24 = SQRT (R25:R24:R23:R22) rounded to the
// nearest integer (0.5 rounds up)
// Destroys R18-R19,R22-R23,R26-R27
// Cycles incl call & ret = 265-310
// Stack incl call = 2-3
//-----------------------------------------------------------
uint16_t b;
__asm__ __volatile__ (
"ldi R19, 0xc0 \n\t"
"clr R18 \n\t" // rotation mask in R19:R18
"ldi R27, 0x40 \n\t"
"sub R26, R26 \n\t" // developing sqrt in R27:R26, C=0
"1: brcs 2f \n\t" // C --> Bit is always 1
"cp %C1, R26 \n\t"
"cpc %D1, R27 \n\t" // Does test value fit?
"brcs 3f \n\t" // C --> nope, bit is 0
"2: sub %C1, R26 \n\t"
"sbc %D1, R27 \n\t" // Adjust argument for next bit
"or R26, R18 \n\t"
"or R27, R19 \n\t" // Set bit to 1
"3: lsr R19 \n\t"
"ror R18 \n\t" // Shift right mask, C --> end loop
"eor R27, R19 \n\t"
"eor R26, R18 \n\t" // Shift right only test bit in result
"rol %A1 \n\t" // Bit 0 only set if end of loop
"rol %B1 \n\t"
"rol %C1 \n\t"
"rol %D1 \n\t" // Shift left remaining argument (C used at 1:)
"sbrs %A1, 0 \n\t" // Skip if 15 bits developed
"rjmp 1b \n\t" // Develop 15 bits of the sqrt
"brcs 4f \n\t" // C--> Last bits always 1
"cp R26, %C1 \n\t"
"cpc R27, %D1 \n\t" // Test for last bit 1
"brcc 5f \n\t" // NC --> bit is 0
"4: sbc %B1, R19 \n\t" // Subtract C (any value from 1 to 0x7f will do)
"sbc %C1, R26 \n\t"
"sbc %D1, R27 \n\t" // Update argument for test
"inc R26 \n\t" // Last bit is 1
"5: lsl %B1 \n\t" // Only bit 7 matters
"rol %C1 \n\t"
"rol %D1 \n\t" // Remainder * 2 + C
"brcs 6f \n\t" // C --> Always round up
"cp R26, %C1 \n\t"
"cpc R27, %D1 \n\t" // C decides rounding
"6: adc R26, R19 \n\t"
"adc R27, R19 \n\t" // Round up if C (R19=0)
"mov %B0, R27 \n\t" // return in R25:R24 for avr-gcc ABI compliance
"mov %A0, R26 \n\t"
:"=r"(b)
:"r"(a)
:"r18","r19","r27","r26" );
return b;
} // integerSqrt
const uint16_t fast_div_lut[17] PROGMEM = { 0,F_CPU/4096,F_CPU/8192,F_CPU/12288,F_CPU/16384,F_CPU/20480,F_CPU/24576,F_CPU/28672,F_CPU/32768,F_CPU/36864
,F_CPU/40960,F_CPU/45056,F_CPU/49152,F_CPU/53248,F_CPU/57344,F_CPU/61440,F_CPU/65536 };
const uint16_t slow_div_lut[257] PROGMEM = { 0,0,0,0,0,0,0,0,F_CPU/256,F_CPU/288,F_CPU/320,F_CPU/352
,F_CPU/384,F_CPU/416,F_CPU/448,F_CPU/480,F_CPU/512,F_CPU/544,F_CPU/576,F_CPU/608,F_CPU/640,F_CPU/672,F_CPU/704,F_CPU/736,F_CPU/768,F_CPU/800,F_CPU/832
,F_CPU/864,F_CPU/896,F_CPU/928,F_CPU/960,F_CPU/992,F_CPU/1024,F_CPU/1056,F_CPU/1088,F_CPU/1120,F_CPU/1152,F_CPU/1184,F_CPU/1216,F_CPU/1248,F_CPU/1280,F_CPU/1312
,F_CPU/1344,F_CPU/1376,F_CPU/1408,F_CPU/1440,F_CPU/1472,F_CPU/1504,F_CPU/1536,F_CPU/1568,F_CPU/1600,F_CPU/1632,F_CPU/1664,F_CPU/1696,F_CPU/1728,F_CPU/1760,F_CPU/1792
,F_CPU/1824,F_CPU/1856,F_CPU/1888,F_CPU/1920,F_CPU/1952,F_CPU/1984,F_CPU/2016
,F_CPU/2048,F_CPU/2080,F_CPU/2112,F_CPU/2144,F_CPU/2176,F_CPU/2208,F_CPU/2240,F_CPU/2272,F_CPU/2304,F_CPU/2336,F_CPU/2368,F_CPU/2400
,F_CPU/2432,F_CPU/2464,F_CPU/2496,F_CPU/2528,F_CPU/2560,F_CPU/2592,F_CPU/2624,F_CPU/2656,F_CPU/2688,F_CPU/2720,F_CPU/2752,F_CPU/2784,F_CPU/2816,F_CPU/2848,F_CPU/2880
,F_CPU/2912,F_CPU/2944,F_CPU/2976,F_CPU/3008,F_CPU/3040,F_CPU/3072,F_CPU/3104,F_CPU/3136,F_CPU/3168,F_CPU/3200,F_CPU/3232,F_CPU/3264,F_CPU/3296,F_CPU/3328,F_CPU/3360
,F_CPU/3392,F_CPU/3424,F_CPU/3456,F_CPU/3488,F_CPU/3520,F_CPU/3552,F_CPU/3584,F_CPU/3616,F_CPU/3648,F_CPU/3680,F_CPU/3712,F_CPU/3744,F_CPU/3776,F_CPU/3808,F_CPU/3840
,F_CPU/3872,F_CPU/3904,F_CPU/3936,F_CPU/3968,F_CPU/4000,F_CPU/4032,F_CPU/4064
,F_CPU/4096,F_CPU/4128,F_CPU/4160,F_CPU/4192,F_CPU/4224,F_CPU/4256,F_CPU/4288,F_CPU/4320,F_CPU/4352,F_CPU/4384,F_CPU/4416,F_CPU/4448,F_CPU/4480,F_CPU/4512,F_CPU/4544
,F_CPU/4576,F_CPU/4608,F_CPU/4640,F_CPU/4672,F_CPU/4704,F_CPU/4736,F_CPU/4768,F_CPU/4800,F_CPU/4832,F_CPU/4864,F_CPU/4896,F_CPU/4928,F_CPU/4960,F_CPU/4992,F_CPU/5024
,F_CPU/5056,F_CPU/5088,F_CPU/5120,F_CPU/5152,F_CPU/5184,F_CPU/5216,F_CPU/5248,F_CPU/5280,F_CPU/5312,F_CPU/5344,F_CPU/5376,F_CPU/5408,F_CPU/5440,F_CPU/5472,F_CPU/5504
,F_CPU/5536,F_CPU/5568,F_CPU/5600,F_CPU/5632,F_CPU/5664,F_CPU/5696,F_CPU/5728,F_CPU/5760,F_CPU/5792,F_CPU/5824,F_CPU/5856,F_CPU/5888,F_CPU/5920,F_CPU/5952,F_CPU/5984
,F_CPU/6016,F_CPU/6048,F_CPU/6080,F_CPU/6112,F_CPU/6144,F_CPU/6176,F_CPU/6208,F_CPU/6240,F_CPU/6272,F_CPU/6304,F_CPU/6336,F_CPU/6368,F_CPU/6400,F_CPU/6432,F_CPU/6464
,F_CPU/6496,F_CPU/6528,F_CPU/6560,F_CPU/6592,F_CPU/6624,F_CPU/6656,F_CPU/6688,F_CPU/6720,F_CPU/6752,F_CPU/6784,F_CPU/6816,F_CPU/6848,F_CPU/6880,F_CPU/6912,F_CPU/6944
,F_CPU/6976,F_CPU/7008,F_CPU/7040,F_CPU/7072,F_CPU/7104,F_CPU/7136,F_CPU/7168,F_CPU/7200,F_CPU/7232,F_CPU/7264,F_CPU/7296,F_CPU/7328,F_CPU/7360,F_CPU/7392,F_CPU/7424
,F_CPU/7456,F_CPU/7488,F_CPU/7520,F_CPU/7552,F_CPU/7584,F_CPU/7616,F_CPU/7648,F_CPU/7680,F_CPU/7712,F_CPU/7744,F_CPU/7776,F_CPU/7808,F_CPU/7840,F_CPU/7872,F_CPU/7904
,F_CPU/7936,F_CPU/7968,F_CPU/8000,F_CPU/8032,F_CPU/8064,F_CPU/8096,F_CPU/8128,F_CPU/8160,F_CPU/8192 };
/** \brief approximates division of F_CPU/divisor
In the stepper interrupt a division is needed, which is a slow operation.
The result is used for timer calculation where small errors are ok. This
function uses lookup tables to find a fast approximation of the result.
*/
int32_t HAL::CPUDivU2(unsigned int divisor)
{
int32_t res;
unsigned short table;
if(divisor<8192)
{
if(divisor<512)
{
if(divisor<10) divisor = 10;
return Div4U2U(F_CPU,divisor); // These entries have overflows in lookuptable!
}
table = (unsigned short)&slow_div_lut[0];
__asm__ __volatile__( // needs 64 ticks neu 49 Ticks
"mov r18,%A1 \n\t"
"andi r18,31 \n\t" // divisor & 31 in r18
"lsr %B1 \n\t" // divisor >> 4
"ror %A1 \n\t"
"lsr %B1 \n\t"
"ror %A1 \n\t"
"lsr %B1 \n\t"
"ror %A1 \n\t"
"lsr %B1 \n\t"
"ror %A1 \n\t"
"andi %A1,254 \n\t"
"add %A2,%A1 \n\t" // table+divisor>>3
"adc %B2,%B1 \n\t"
"lpm %A0,Z+ \n\t" // y0 in res
"lpm %B0,Z+ \n\t" // %C0,%D0 are 0
"movw r4,%A0 \n\t" // y0 nach gain (r4-r5)
"lpm r0,Z+ \n\t" // gain = gain-y1
"sub r4,r0 \n\t"
"lpm r0,Z+ \n\t"
"sbc r5,r0 \n\t"
"mul r18,r4 \n\t" // gain*(divisor & 31)
"movw %A1,r0 \n\t" // divisor not needed any more, use for byte 0,1 of result
"mul r18,r5 \n\t"
"add %B1,r0 \n\t"
"mov %A2,r1 \n\t"
"lsl %A1 \n\t"
"rol %B1 \n\t"
"rol %A2 \n\t"
"lsl %A1 \n\t"
"rol %B1 \n\t"
"rol %A2 \n\t"
"lsl %A1 \n\t"
"rol %B1 \n\t"
"rol %A2 \n\t"
"sub %A0,%B1 \n\t"
"sbc %B0,%A2 \n\t"
"clr %C0 \n\t"
"clr %D0 \n\t"
"clr r1 \n\t"
: "=&r" (res),"=&d"(divisor),"=&z"(table) : "1"(divisor),"2"(table) : "r18","r4","r5");
return res;
/*unsigned short adr0 = (unsigned short)&slow_div_lut+(divisor>>4)&1022;
long y0= pgm_read_dword_near(adr0);
long gain = y0-pgm_read_dword_near(adr0+2);
return y0-((gain*(divisor & 31))>>5);*/
}
else
{
table = (unsigned short)&fast_div_lut[0];
__asm__ __volatile__( // needs 49 ticks
"movw r18,%A1 \n\t"
"andi r19,15 \n\t" // divisor & 4095 in r18,r19
"lsr %B1 \n\t" // divisor >> 3, then %B1 is 2*(divisor >> 12)
"lsr %B1 \n\t"
"lsr %B1 \n\t"
"andi %B1,254 \n\t"
"add %A2,%B1 \n\t" // table+divisor>>11
"adc %B2,r1 \n\t" //
"lpm %A0,Z+ \n\t" // y0 in res
"lpm %B0,Z+ \n\t"
"movw r4,%A0 \n\t" // y0 to gain (r4-r5)
"lpm r0,Z+ \n\t" // gain = gain-y1
"sub r4,r0 \n\t"
"lpm r0,Z+ \n\t"
"sbc r5,r0 \n\t" // finished - result has max. 16 bit
"mul r18,r4 \n\t" // gain*(divisor & 4095)
"movw %A1,r0 \n\t" // divisor not needed any more, use for byte 0,1 of result
"mul r19,r5 \n\t"
"mov %A2,r0 \n\t" // %A2 = byte 3 of result
"mul r18,r5 \n\t"
"add %B1,r0 \n\t"
"adc %A2,r1 \n\t"
"mul r19,r4 \n\t"
"add %B1,r0 \n\t"
"adc %A2,r1 \n\t"
"andi %B1,240 \n\t" // >> 12
"swap %B1 \n\t"
"swap %A2 \r\n"
"mov %A1,%A2 \r\n"
"andi %A1,240 \r\n"
"or %B1,%A1 \r\n"
"andi %A2,15 \r\n"
"sub %A0,%B1 \n\t"
"sbc %B0,%A2 \n\t"
"clr %C0 \n\t"
"clr %D0 \n\t"
"clr r1 \n\t"
: "=&r" (res),"=&d"(divisor),"=&z"(table) : "1"(divisor),"2"(table) : "r18","r19","r4","r5");
return res;
/*
// The asm mimics the following code
unsigned short adr0 = (unsigned short)&fast_div_lut+(divisor>>11)&254;
unsigned short y0= pgm_read_word_near(adr0);
unsigned short gain = y0-pgm_read_word_near(adr0+2);
return y0-(((long)gain*(divisor & 4095))>>12);*/
}
} // CPUDivU2
void HAL::setupTimer()
{
#if defined(USE_ADVANCE)
EXTRUDER_TCCR = 0; // need Normal not fastPWM set by arduino init
EXTRUDER_TIMSK |= (1<<EXTRUDER_OCIE); // Activate compa interrupt on timer 0
#endif // defined(USE_ADVANCE)
PWM_TCCR = 0; // Setup PWM interrupt
PWM_OCR = 64;
PWM_TIMSK |= (1<<PWM_OCIE);
TCCR1A = 0; // Setup timer 1 interrupt to no prescale CTC mode
TCCR1C = 0;
TIMSK1 = 0;
TCCR1B = (_BV(WGM12) | _BV(CS10)); // no prescaler == 0.0625 usec tick | 001 = clk/1
OCR1A=65500; // start off with a slow frequency.
TIMSK1 |= (1<<OCIE1A); // Enable interrupt
#if FEATURE_RGB_LIGHT_EFFECTS
// Configure Timer 4 for RGB-PWM
TCCR4A = 0; // clear Register
TCCR4B = 0;
ICR4 = 20480; // set frequency to 100Hz = 10ms
TCCR4A |= (1<<WGM41); // Fast PWM
TCCR4B |= (1<<WGM42)|(1<<WGM43)|(1<<CS41); // Prescaler = 8
SET_OUTPUT(RGB_LIGHT_R_PIN); // PH3 - Pin 15 ( OC4A )
SET_OUTPUT(RGB_LIGHT_G_PIN); // PH4 - Pin 16 ( OC4B )
SET_OUTPUT(RGB_LIGHT_B_PIN); // PH5 - Pin 17 ( OC4C )
TCCR4A |= (1<<COM4A1)|(1<<COM4B1)|(1<<COM4C1); // enable fast PWM
OCR4A = 0; // default R = 0 at startup
OCR4B = 0; // default G = 0 at startup
OCR4C = 0; // default B = 0 at startup
#endif // FEATURE_RGB_LIGHT_EFFECTS
#if FEATURE_SERVO && (MOTHERBOARD == DEVICE_TYPE_RF2000 || MOTHERBOARD == DEVICE_TYPE_RF2000_V2)
//Configure Timer 5
TCCR5A = 0; // clear Register
TCCR5B = 0;
ICR5 = 39999; // set frequency to 50Hz = 20ms
TCCR5A |= (1<<WGM51); // Fast PWM
TCCR5B |= (1<<WGM52)|(1<<WGM53)|(1<<CS51); // Prescaler = 8
SET_OUTPUT(SERVO1_PIN); // PL3 - Pin 38 ( OC5A )
SET_OUTPUT(SERVO2_PIN); // PL4 - Pin 39 ( OC5B )
SET_OUTPUT(SERVO3_PIN); // PL5 - Pin 40 ( OC5C )
TCCR5A |= (1<<COM5A1)|(1<<COM5B1)|(1<<COM5C1); // enable Fast PWM
OCR5A = 1600; // default ( 800 [uS] )
OCR5B = 1600; // default ( 800 [uS] )
OCR5C = 1600; // default ( 800 [uS] )
#endif // FEATURE_SERVO && (MOTHERBOARD == DEVICE_TYPE_RF2000 || MOTHERBOARD == DEVICE_TYPE_RF2000_V2)
#if FEATURE_SERVO && MOTHERBOARD == DEVICE_TYPE_RF1000
#if SERVO0_PIN>-1
SET_OUTPUT(SERVO0_PIN);
WRITE(SERVO0_PIN,LOW);
#endif // SERVO0_PIN>-1
#if SERVO1_PIN>-1
SET_OUTPUT(SERVO1_PIN);
WRITE(SERVO1_PIN,LOW);
#endif // SERVO1_PIN>-1
#if SERVO2_PIN>-1
SET_OUTPUT(SERVO2_PIN);
WRITE(SERVO2_PIN,LOW);
#endif // SERVO2_PIN>-1
TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8
TCNT3 = 0; // clear the timer count
#if defined(__AVR_ATmega128__)
TIFR |= _BV(OCF3A); // clear any pending interrupts;
ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
#else
TIFR3 = _BV(OCF3A); // clear any pending interrupts;
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
#endif // defined(__AVR_ATmega128__)
#endif // FEATURE_SERVO && MOTHERBOARD == DEVICE_TYPE_RF1000
} // setupTimer
void HAL::showStartReason()
{
// Check startup - does nothing if bootloader sets MCUSR to 0
uint8_t mcu = MCUSR;
if( Printer::debugInfo() )
{
if(mcu & 1) Com::printInfoFLN(Com::tPowerUp);
if(mcu & 2) Com::printInfoFLN(Com::tExternalReset);
if(mcu & 4) Com::printInfoFLN(Com::tBrownOut);
if(mcu & 8) Com::printInfoFLN(Com::tWatchdog);
if(mcu & 32) Com::printInfoFLN(Com::tSoftwareReset);
}
MCUSR=0;
} // showStartReason
int HAL::getFreeRam()
{
int freeram = 0;
BEGIN_INTERRUPT_PROTECTED
uint8_t * heapptr, * stackptr;
heapptr = (uint8_t *)malloc(4); // get heap pointer
free(heapptr); // free up the memory again (sets heapptr to 0)
stackptr = (uint8_t *)(SP); // save value of stack pointer
freeram = (int)stackptr-(int)heapptr;
END_INTERRUPT_PROTECTED
return freeram;
} // getFreeRam
void(* resetFunc) (void) = 0; // declare reset function @ address 0
void HAL::resetHardware()
{
resetFunc();
} // resetHardware
void HAL::analogStart()
{
#if ANALOG_INPUTS>0
ADMUX = ANALOG_REF; // refernce voltage
for(uint8_t i=0; i<ANALOG_INPUTS; i++)
{
osAnalogInputCounter[i] = 0;
osAnalogInputBuildup[i] = 0;
osAnalogInputValues[i] = 0;
}
ADCSRA = _BV(ADEN)|_BV(ADSC)|ANALOG_PRESCALER;
//ADCSRA |= _BV(ADSC); // start ADC-conversion
while (ADCSRA & _BV(ADSC) ) {} // wait for conversion
/* ADCW must be read once, otherwise the next result is wrong. */
uint dummyADCResult;
dummyADCResult = ADCW;
// Enable interrupt driven conversion loop
uint8_t channel = pgm_read_byte(&osAnalogInputChannels[osAnalogInputPos]);
#if defined(ADCSRB) && defined(MUX5)
if(channel & 8) // Reading channel 0-7 or 8-15?
ADCSRB |= _BV(MUX5);
else
ADCSRB &= ~_BV(MUX5);
#endif // defined(ADCSRB) && defined(MUX5)
ADMUX = (ADMUX & ~(0x1F)) | (channel & 7);
ADCSRA |= _BV(ADSC); // start conversion without interrupt!
#endif // ANALOG_INPUTS>0
} // analogStart
/*************************************************************************
* Title: I2C master library using hardware TWI interface
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device with hardware TWI
* Usage: API compatible with I2C Software Library i2cmaster.h
**************************************************************************/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
/*************************************************************************
Initialization of the I2C bus interface. Need to be called only once
*************************************************************************/
void HAL::i2cInit(unsigned long clockSpeedHz)
{
// initialize TWI clock: 100 kHz clock, TWPS = 0 => prescaler = 1
TWSR = 0; // no prescaler
TWBR = ((F_CPU/clockSpeedHz)-16)/2; // must be > 10 for stable operation
} // i2cInit
/*************************************************************************
Issues a start condition and sends address and transfer direction.
return 0 = device accessible, 1= failed to access device
*************************************************************************/
unsigned char HAL::i2cStart(unsigned char address)
{
uint8_t twst;
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) return 1;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed and ACK/NACK has been received
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
} // i2cStart
/*************************************************************************
Issues a start condition and sends address and transfer direction.
If device is busy, use ack polling to wait until device is ready
Input: address and transfer direction of I2C device
*************************************************************************/
void HAL::i2cStartWait(unsigned char address)
{
uint8_t twst;
while ( 1 )
{
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) continue;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) )
{
/* device busy, send stop condition to terminate write operation */
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
continue;
}
//if( twst != TW_MT_SLA_ACK) return 1;
break;
}
} // i2cStartWait
/*************************************************************************
Terminates the data transfer and releases the I2C bus
*************************************************************************/
void HAL::i2cStop(void)
{
// send stop condition
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
} // i2cStop
/*************************************************************************
Send one byte to I2C device
Input: byte to be transfered
Return: 0 write successful
1 write failed
*************************************************************************/
unsigned char HAL::i2cWrite( unsigned char data )
{
uint8_t twst;
// send data to the previously addressed device
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits
twst = TW_STATUS & 0xF8;
if( twst != TW_MT_DATA_ACK) return 1;
return 0;
} // i2cWrite
/*************************************************************************
Read one byte from the I2C device, request more data from device
Return: byte read from I2C device
*************************************************************************/
unsigned char HAL::i2cReadAck(void)
{
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
while(!(TWCR & (1<<TWINT)));
return TWDR;
} // i2cReadAck
/*************************************************************************
Read one byte from the I2C device, read is followed by a stop condition
Return: byte read from I2C device
*************************************************************************/
unsigned char HAL::i2cReadNak(void)
{
TWCR = (1<<TWINT) | (1<<TWEN);
while(!(TWCR & (1<<TWINT)));
return TWDR;
} // i2cReadNak
#if FEATURE_SERVO && MOTHERBOARD == DEVICE_TYPE_RF1000
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
#define SERVO2500US F_CPU/3200
#define SERVO5000US F_CPU/1600
unsigned int HAL::servoTimings[4] = {0,0,0,0};
static uint8_t servoIndex = 0;
void HAL::servoMicroseconds(uint8_t servo,int ms)
{
if(ms<500) ms = 0;
if(ms>2500) ms = 2500;
servoTimings[servo] = (unsigned int)(((F_CPU/1000000)*(long)ms)>>3);
} // servoMicroseconds
SIGNAL (TIMER3_COMPA_vect)
{
switch(servoIndex)
{
case 0:
{
TCNT3 = 0;
if(HAL::servoTimings[0])
{
#if SERVO0_PIN>-1
WRITE(SERVO0_PIN,HIGH);
#endif // SERVO0_PIN>-1
OCR3A = HAL::servoTimings[0];
}
else
{
OCR3A = SERVO2500US;
}
break;
}
case 1:
{
#if SERVO0_PIN>-1
WRITE(SERVO0_PIN,LOW);
#endif // SERVO0_PIN>-1
OCR3A = SERVO5000US;
break;
}
case 2:
{
TCNT3 = 0;
if(HAL::servoTimings[1])
{
#if SERVO1_PIN>-1
WRITE(SERVO1_PIN,HIGH);
#endif // SERVO1_PIN>-1
OCR3A = HAL::servoTimings[1];
}
else
{
OCR3A = SERVO2500US;
}
break;
}
case 3:
{
#if SERVO1_PIN>-1
WRITE(SERVO1_PIN,LOW);
#endif // SERVO1_PIN>-1
OCR3A = SERVO5000US;
break;
}
case 4:
{
TCNT3 = 0;
if(HAL::servoTimings[2])
{
#if SERVO2_PIN>-1
WRITE(SERVO2_PIN,HIGH);
#endif // SERVO2_PIN>-1
OCR3A = HAL::servoTimings[2];
}
else
{
OCR3A = SERVO2500US;
}
break;
}
case 5:
{
#if SERVO2_PIN>-1
WRITE(SERVO2_PIN,LOW);
#endif // SERVO2_PIN>-1
OCR3A = SERVO5000US;
break;
}
}
servoIndex++;
if(servoIndex>5)
servoIndex = 0;
}
#else
#error No servo support for your board, please disable FEATURE_SERVO
#endif // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
#endif // #if FEATURE_SERVO && MOTHERBOARD == DEVICE_TYPE_RF1000
// ================== Interrupt handling ======================
/** \brief Sets the timer 1 compare value to delay ticks.
This function sets the OCR1A compare counter to get the next interrupt
at delay ticks measured from the last interrupt. delay must be << 2^24 */
inline void setTimer(uint32_t delay)
{
__asm__ __volatile__ (
"cli \n\t"
"tst %C[delay] \n\t" //if(delay<65536) {
"brne else%= \n\t"
"cpi %B[delay],255 \n\t"
"breq else%= \n\t" // delay <65280
"sts stepperWait,r1 \n\t" // stepperWait = 0;
"sts stepperWait+1,r1 \n\t"
"sts stepperWait+2,r1 \n\t"
"lds %C[delay],%[time] \n\t" // Read TCNT1
"lds %D[delay],%[time]+1 \n\t"
"ldi r18,100 \n\t" // Add 100 to TCNT1
"add %C[delay],r18 \n\t"
"adc %D[delay],r1 \n\t"
"cp %A[delay],%C[delay] \n\t" // delay<TCNT1+1
"cpc %B[delay],%D[delay] \n\t"
"brcc exact%= \n\t"
"sts %[ocr]+1,%D[delay] \n\t" // OCR1A = TCNT1+100;
"sts %[ocr],%C[delay] \n\t"
"rjmp end%= \n\t"
"exact%=: sts %[ocr]+1,%B[delay] \n\t" // OCR1A = delay;
"sts %[ocr],%A[delay] \n\t"
"rjmp end%= \n\t"
"else%=: subi %B[delay], 0x80 \n\t" //} else { stepperWait = delay-32768;
"sbci %C[delay], 0x00 \n\t"
"sts stepperWait,%A[delay] \n\t"
"sts stepperWait+1,%B[delay] \n\t"
"sts stepperWait+2,%C[delay] \n\t"
"ldi %D[delay], 0x80 \n\t" //OCR1A = 32768;
"sts %[ocr]+1, %D[delay] \n\t"
"sts %[ocr], r1 \n\t"
"end%=: \n\t"
:[delay]"=&d"(delay) // Output
:"0"(delay),[ocr]"i" (_SFR_MEM_ADDR(OCR1A)),[time]"i"(_SFR_MEM_ADDR(TCNT1)) // Input
:"r18" // Clobber
);
/* // Assembler above replaced this code
if(delay<65280) {
stepperWait = 0;
unsigned int count = TCNT1+100;
if(delay<count)
OCR1A = count;
else
OCR1A = delay;
} else {
stepperWait = delay-32768;
OCR1A = 32768;
}*/
} // setTimer
long stepperWait = 0;
/** \brief Timer interrupt routine to drive the stepper motors.
*/
ISR(TIMER1_COMPA_vect)
{
#if FEATURE_WATCHDOG
if( (HAL::timeInMilliseconds() - g_uLastCommandLoop) < WATCHDOG_MAIN_LOOP_TIMEOUT )
{
// ping the watchdog only in case the mainloop is still being called
HAL::pingWatchdog();
}
#endif // FEATURE_WATCHDOG
uint8_t doExit;
__asm__ __volatile__ (
"ldi %[ex],0 \n\t"
"lds r23,stepperWait+2 \n\t"
"tst r23 \n\t" //if(stepperWait<65536) {
"brne else%= \n\t" // Still > 65535
"lds r23,stepperWait+1 \n\t"
"tst r23 \n\t"
"brne last%= \n\t" // Still not 0, go ahead
"lds r22,stepperWait \n\t"
"breq end%= \n\t" // stepperWait is 0, do your work
"last%=: \n\t"
"sts %[ocr]+1,r23 \n\t" // OCR1A = stepper wait;
"sts %[ocr],r22 \n\t"
"sts stepperWait,r1 \n\t"
"sts stepperWait+1,r1 \n\t"
"rjmp end1%= \n\t"
"else%=: lds r22,stepperWait+1 \n\t" //} else { stepperWait = stepperWait-32768;
"subi r22, 0x80 \n\t"
"sbci r23, 0x00 \n\t"
"sts stepperWait+1,r22 \n\t" // ocr1a stays 32768
"sts stepperWait+2,r23 \n\t"
"end1%=: ldi %[ex],1 \n\t"
"end%=: \n\t"
:[ex]"=&d"(doExit):[ocr]"i" (_SFR_MEM_ADDR(OCR1A)):"r22","r23" );
if(doExit) return;
cbi(TIMSK1, OCIE1A); // prevent retrigger timer by disabling timer interrupt. Should be faster than guarding with insideTimer1.
OCR1A = 61000;
#if FEATURE_HEAT_BED_Z_COMPENSATION || FEATURE_WORK_PART_Z_COMPENSATION
Printer::performZCompensation();
#endif // FEATURE_HEAT_BED_Z_COMPENSATION || FEATURE_WORK_PART_Z_COMPENSATION
#if FEATURE_EXTENDED_BUTTONS || FEATURE_PAUSE_PRINTING
if( Printer::allowDirectSteps() )
{
PrintLine::performDirectSteps();
}
#endif // FEATURE_EXTENDED_BUTTONS || FEATURE_PAUSE_PRINTING
if(Printer::allowQueueMove())
{
setTimer(PrintLine::performQueueMove());
DEBUG_MEMORY;
sbi(TIMSK1, OCIE1A);
return;
}
#if FEATURE_EXTENDED_BUTTONS || FEATURE_PAUSE_PRINTING
if(Printer::allowDirectMove())
{
setTimer(PrintLine::performDirectMove());
DEBUG_MEMORY;
sbi(TIMSK1, OCIE1A);
return;
}
#endif // FEATURE_EXTENDED_BUTTONS || FEATURE_PAUSE_PRINTING
if(waitRelax == 0)
{
#ifdef USE_ADVANCE
if(Printer::advanceStepsSet)
{
Printer::extruderStepsNeeded -= Printer::advanceStepsSet;
#ifdef ENABLE_QUADRATIC_ADVANCE
Printer::advanceExecuted = 0;
#endif // ENABLE_QUADRATIC_ADVANCE
Printer::advanceStepsSet = 0;
}
if(!Printer::extruderStepsNeeded) if(DISABLE_E) Extruder::disableCurrentExtruderMotor();
#else
if(DISABLE_E) Extruder::disableCurrentExtruderMotor();
#endif // USE_ADVANCE
}
else
{
waitRelax--;
}
stepperWait = 0; // Important because of optimization in asm at begin
OCR1A = 1000; // Wait for next move
DEBUG_MEMORY;
sbi(TIMSK1, OCIE1A);
} // ISR(TIMER1_COMPA_vect)
#if HEATER_PWM_SPEED == 0
#define HEATER_PWM_STEP 1
#define HEATER_PWM_MASK 255
#elif HEATER_PWM_SPEED == 1
#define HEATER_PWM_STEP 2
#define HEATER_PWM_MASK 254
#elif HEATER_PWM_SPEED == 2
#define HEATER_PWM_STEP 4
#define HEATER_PWM_MASK 252
#else
#define HEATER_PWM_STEP 4
#define HEATER_PWM_MASK 252
#endif // HEATER_PWM_SPEED == 0
#if COOLER_PWM_SPEED == 0
#define COOLER_PWM_STEP 1
#define COOLER_PWM_MASK 255
#elif COOLER_PWM_SPEED == 1
#define COOLER_PWM_STEP 2
#define COOLER_PWM_MASK 254
#elif COOLER_PWM_SPEED == 2
#define COOLER_PWM_STEP 4
#define COOLER_PWM_MASK 252
#else
#define COOLER_PWM_STEP 4
#define COOLER_PWM_MASK 252
#endif // COOLER_PWM_SPEED == 0
#define pulseDensityModulate( pin, density,error,invert) {uint8_t carry;carry = error + (invert ? 255 - density : density); WRITE(pin, (carry < error)); error = carry;}
/**
This timer is called 3906 times per second. It is used to update pwm values for heater and some other frequent jobs.
*/
ISR(PWM_TIMER_VECTOR)
{
static uint8_t pwm_count_heater = 0;
static uint8_t pwm_count_cooler = 0;
static uint8_t pwm_heater_pos_set[NUM_EXTRUDER+3];
static uint8_t pwm_cooler_pos_set[NUM_EXTRUDER];
PWM_OCR += 64;
if(pwm_count_heater == 0)
{
#if EXT0_HEATER_PIN>-1
if((pwm_heater_pos_set[0] = (pwm_pos[0] & HEATER_PWM_MASK))>0) WRITE(EXT0_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // EXT0_HEATER_PIN>-1
#if defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1
if((pwm_heater_pos_set[1] = (pwm_pos[1] & HEATER_PWM_MASK))>0) WRITE(EXT1_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1
#if defined(EXT2_HEATER_PIN) && EXT2_HEATER_PIN>-1 && NUM_EXTRUDER>2
if((pwm_heater_pos_set[2] = (pwm_pos[2] & HEATER_PWM_MASK))>0) WRITE(EXT2_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // defined(EXT2_HEATER_PIN) && EXT2_HEATER_PIN>-1 && NUM_EXTRUDER>2
#if defined(EXT3_HEATER_PIN) && EXT3_HEATER_PIN>-1 && NUM_EXTRUDER>3
if((pwm_heater_pos_set[3] = (pwm_pos[3] & HEATER_PWM_MASK))>0) WRITE(EXT3_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // defined(EXT3_HEATER_PIN) && EXT3_HEATER_PIN>-1 && NUM_EXTRUDER>3
#if defined(EXT4_HEATER_PIN) && EXT4_HEATER_PIN>-1 && NUM_EXTRUDER>4
if((pwm_heater_pos_set[4] = (pwm_pos[4] & HEATER_PWM_MASK))>0) WRITE(EXT4_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // defined(EXT4_HEATER_PIN) && EXT4_HEATER_PIN>-1 && NUM_EXTRUDER>4
#if defined(EXT5_HEATER_PIN) && EXT5_HEATER_PIN>-1 && NUM_EXTRUDER>5
if((pwm_heater_pos_set[5] = (pwm_pos[5] & HEATER_PWM_MASK))>0) WRITE(EXT5_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // defined(EXT5_HEATER_PIN) && EXT5_HEATER_PIN>-1 && NUM_EXTRUDER>5
#if HEATED_BED_HEATER_PIN>-1 && HAVE_HEATED_BED
if((pwm_heater_pos_set[NUM_EXTRUDER] = pwm_pos[NUM_EXTRUDER])>0) WRITE(HEATED_BED_HEATER_PIN,!HEATER_PINS_INVERTED);
#endif // HEATED_BED_HEATER_PIN>-1 && HAVE_HEATED_BED
}
if(pwm_count_cooler == 0 && !PDM_FOR_COOLER)
{
#if EXT0_HEATER_PIN>-1 && EXT0_EXTRUDER_COOLER_PIN>-1
if((pwm_cooler_pos_set[0] = extruder[0].coolerPWM)>0) WRITE(EXT0_EXTRUDER_COOLER_PIN,1);
#endif // EXT0_HEATER_PIN>-1 && EXT0_EXTRUDER_COOLER_PIN>-1
#if defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1
#if EXT1_EXTRUDER_COOLER_PIN>-1 && EXT1_EXTRUDER_COOLER_PIN!=EXT0_EXTRUDER_COOLER_PIN
if((pwm_cooler_pos_set[1] = extruder[1].coolerPWM)>0) WRITE(EXT1_EXTRUDER_COOLER_PIN,1);
#endif // EXT1_EXTRUDER_COOLER_PIN>-1 && EXT1_EXTRUDER_COOLER_PIN!=EXT0_EXTRUDER_COOLER_PIN
#endif // defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1
#if defined(EXT2_HEATER_PIN) && EXT2_HEATER_PIN>-1 && NUM_EXTRUDER>2
#if EXT2_EXTRUDER_COOLER_PIN>-1
if((pwm_cooler_pos_set[2] = extruder[2].coolerPWM)>0) WRITE(EXT2_EXTRUDER_COOLER_PIN,1);
#endif // EXT2_EXTRUDER_COOLER_PIN>-1
#endif // defined(EXT2_HEATER_PIN) && EXT2_HEATER_PIN>-1 && NUM_EXTRUDER>2
#if defined(EXT3_HEATER_PIN) && EXT3_HEATER_PIN>-1 && NUM_EXTRUDER>3
#if EXT3_EXTRUDER_COOLER_PIN>-1
if((pwm_cooler_pos_set[3] = extruder[3].coolerPWM)>0) WRITE(EXT3_EXTRUDER_COOLER_PIN,1);
#endif // EXT3_EXTRUDER_COOLER_PIN>-1
#endif // defined(EXT3_HEATER_PIN) && EXT3_HEATER_PIN>-1 && NUM_EXTRUDER>3
#if defined(EXT4_HEATER_PIN) && EXT4_HEATER_PIN>-1 && NUM_EXTRUDER>4
#if EXT4_EXTRUDER_COOLER_PIN>-1
if((pwm_cooler_pos_set[4] = pwm_pos[4].coolerPWM)>0) WRITE(EXT4_EXTRUDER_COOLER_PIN,1);
#endif // EXT4_EXTRUDER_COOLER_PIN>-1
#endif // defined(EXT4_HEATER_PIN) && EXT4_HEATER_PIN>-1 && NUM_EXTRUDER>4
#if defined(EXT5_HEATER_PIN) && EXT5_HEATER_PIN>-1 && NUM_EXTRUDER>5
#if EXT5_EXTRUDER_COOLER_PIN>-1
if((pwm_cooler_pos_set[5] = extruder[5].coolerPWM)>0) WRITE(EXT5_EXTRUDER_COOLER_PIN,1);
#endif // EXT5_EXTRUDER_COOLER_PIN>-1
#endif // defined(EXT5_HEATER_PIN) && EXT5_HEATER_PIN>-1 && NUM_EXTRUDER>5
#if FAN_BOARD_PIN>-1
if((pwm_heater_pos_set[NUM_EXTRUDER+1] = pwm_pos[NUM_EXTRUDER+1])>0) WRITE(FAN_BOARD_PIN,1);
#endif // FAN_BOARD_PIN>-1
#if FAN_PIN>-1 && FEATURE_FAN_CONTROL
if((pwm_heater_pos_set[NUM_EXTRUDER+2] = (pwm_pos[NUM_EXTRUDER+2] & COOLER_PWM_MASK)) > 0) WRITE(FAN_PIN,1);
#endif // FAN_PIN>-1 && FEATURE_FAN_CONTROL
}
#if EXT0_HEATER_PIN>-1
if(pwm_heater_pos_set[0] == pwm_count_heater && pwm_heater_pos_set[0]!=HEATER_PWM_MASK) WRITE(EXT0_HEATER_PIN,HEATER_PINS_INVERTED);
#if EXT0_EXTRUDER_COOLER_PIN>-1
if(pwm_cooler_pos_set[0] == pwm_count_cooler && pwm_cooler_pos_set[0]!=255) WRITE(EXT0_EXTRUDER_COOLER_PIN,0);
#endif // #if EXT0_EXTRUDER_COOLER_PIN>-1
#endif // #if EXT0_HEATER_PIN>-1
#if defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1
if(pwm_heater_pos_set[1] == pwm_count_heater && pwm_heater_pos_set[1]!=HEATER_PWM_MASK) WRITE(EXT1_HEATER_PIN,HEATER_PINS_INVERTED);
#if EXT1_EXTRUDER_COOLER_PIN>-1 && EXT1_EXTRUDER_COOLER_PIN!=EXT0_EXTRUDER_COOLER_PIN
if(pwm_cooler_pos_set[1] == pwm_count_cooler && pwm_cooler_pos_set[1]!=255) WRITE(EXT1_EXTRUDER_COOLER_PIN,0);
#endif // EXT1_EXTRUDER_COOLER_PIN>-1 && EXT1_EXTRUDER_COOLER_PIN!=EXT0_EXTRUDER_COOLER_PIN
#endif // defined(EXT1_HEATER_PIN) && EXT1_HEATER_PIN>-1 && NUM_EXTRUDER>1