Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

02-tests/task 02 Release 2016.10 - RC4 #35

Closed
kYc0o opened this issue Nov 10, 2016 · 1 comment
Closed

02-tests/task 02 Release 2016.10 - RC4 #35

kYc0o opened this issue Nov 10, 2016 · 1 comment

Comments

@kYc0o
Copy link
Contributor

kYc0o commented Nov 10, 2016

Task # 02

Perform a subset of tests on iotlab-m3 node:

  • bitarithm_timings
  • bloom_bytes OK but don't know if the output is right:
INFO # checking 10000 elements took 2145ms
INFO # 
INFO # 267 elements probably in the filter.
INFO # 9733 elements not in the filter.
INFO #  false positive rate.
INFO # 
INFO # All done!
  • coap
  • conn_ip
  • cpp11_condition_variable OK
  • cpp11_mutex
  • cpp11_thread OK
  • driver_adt7310
  • driver_at30tse75x
  • driver_at86rf2xx OK
  • driver_bh1750
  • driver_bmp180 OK Results in error as expected
  • driver_dht
  • driver_enc28j60
  • driver_encx24j600
  • driver_hdc1000 OK Results in error as expected
  • driver_hih6130
  • driver_ina220
  • driver_io1_xplained
  • driver_isl29020 OK
  • driver_isl29125
  • driver_kw2xrf
  • driver_l3g4200d OK
  • driver_lis3dh
  • driver_lis3mdl
  • driver_lpd8808
  • driver_lps331ap OK
  • driver_lsm303dlhc
  • driver_mag3110
  • driver_mma8652 OK Results in error as expected
  • driver_mpl3115a2
  • driver_mpu9150
  • driver_mq3 OK Lectures are 0 since there's no sensor
  • driver_nrf24l01p_lowlevel
  • driver_nrfmin
  • driver_nvram_spi
  • driver_pcd8544 OK Runs but no display to test
  • driver_pir
  • driver_servo
  • driver_si70xx OK Results in error as expected
  • driver_srf02
  • driver_srf08
  • driver_tcs37727 OK Results in error as expected
  • driver_tmp006
  • driver_xbee
  • emb6 OK
  • fault_handler
  • float
  • fmt_print OK
  • gnrc_ipv6_ext
  • gnrc_sixlowpan
  • gnrc_sock_ip OK
  • gnrc_sock_udp OK
  • irq
  • leds
  • libfixmath
  • lwip OK
  • malloc
  • minimal
  • mpu_stack_guard OK Shows failure because board is not whitelisted
  • msg_send_receive OK
  • msg_try_receive
  • mutex_order
  • mutex_unlock_and_sleep OK
  • netdev2_test
  • netstats_l2
  • nhdp OK But build in OS X fails
  • od OK
  • periph_adc
  • periph_cpuid
  • periph_dac OK But periph_dac module is not provided for iotlab-m3
  • periph_gpio
  • periph_hwrng
  • periph_i2c OK All drivers work as expected
  • periph_pwm
  • periph_rtc
  • periph_rtt OK
  • periph_spi
  • periph_timer
  • periph_uart OK
  • pipe
  • pkg_aversiveplusplus OK But no servos attached to board
  • pkg_cmsis-dsp
  • pkg_jsmn OK
  • pkg_micro-ecc
  • pkg_tiny-asn1 OK
  • pkg_u8g2
  • posix_semaphore OK
  • posix_sleep
  • pthread
  • pthread_barrier OK
  • pthread_cleanup
  • pthread_condition_variable
  • pthread_cooperation OK
  • pthread_rwlock
  • pthread_tls
  • saul OK
  • sched_testing
  • shell
  • sizeof_tcb OK
  • slip
  • struct_tm_utility
  • thread_basic OK
  • thread_cooperation
  • thread_exit
  • thread_flags OK
  • thread_flood
  • thread_msg
  • thread_msg_avail OK
  • thread_msg_block_wo_queue
  • thread_msg_block_w_queue
  • thread_msg_seq OK
  • warn_conflict
  • xtimer_drift
  • xtimer_hang OK
  • xtimer_longterm
  • xtimer_msg
  • xtimer_msg_receive_timeout OK
  • xtimer_now64_continuity
  • xtimer_periodic_wakeup OK
  • xtimer_remove
  • xtimer_reset OK
  • xtimer_shift_on_compare
  • zep

This list is based on previous #23 with different test marked for this release. I also added the new ones which are systematically performed.

@kYc0o
Copy link
Contributor Author

kYc0o commented Nov 11, 2016

All subset of tests succeeded.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants