r8125.I225 timeout

[tommy030314]

Install ENV:

• motherboard:msi z690 tomahawk
• CPU:i5-12600T
• NIC:r8125,I225

Arpl version:23.8.2

DSM model:x
DSM version:x

Issue: Can't get ip when configuration
works on 23.6

logs:

...

[wjz304]

ifconfig to check if IP has been obtained,
ping 1.1.1.1 to check network connectivity.

[wjz304]

dmesg | grep r8125 to check driver load info

[tommy030314]

dmesg | grep r8125 to check driver load info

[tommy030314]

It shows timeout but I can actually connect on ip:7681, but after configuartion, I can't connect by ip:5000

[wjz304]

Yes, the ARPL interface displays timeout, but if the IP is obtained, it does not affect usage.
Because the initialization process cannot wait endlessly for IP acquisition.

The problem in DSM is the real problem,
If you have customized the MACs, please cancel the customization first,
And check if the original-mac* in /mnt/p1/user-config.yml matches the MACs and order of the real network card

[tommy030314]

Yes, the ARPL interface displays timeout, but if the IP is obtained, it does not affect usage. Because the initialization process cannot wait endlessly for IP acquisition.

The problem in DSM is the real problem, If you have customized the MACs, please cancel the customization first, And check if the original-mac* in /mnt/p1/user-config.yml matches the MACs and order of the real network card

the mac adress matches

after this, I can't connect on both port(5000,7681)
When I type netstat -an, there is no port 5000, is this a problem?

[wjz304]

https://github.com/wjz304/arpl-i18n/wiki/%E5%85%B3%E4%BA%8E-%22%E5%90%AF%E5%8A%A8%22-%E5%90%8E%E6%97%A0%E6%B3%95%E6%89%BE%E5%88%B0DSM

Because my English is very poor, I didn't write it in English,
I don't know if you can understand Google Translate

[wjz304]

Between 23.6 and 23.8, both the default values of LKM and the default values of the kernel way have changed, which will have an impact.

[cr4zyc4t]

try "Direct boot", it worked for me, however sometimes my nas cannot reboot or boot from shutdown state

[wjz304]

#147

[marboroman]

Try this:

1. Make clean loader install on usb
2. After first boot update modules, addons and lkm via update menu
3. Choose model and version
4. Go to modules menu and deselect all
5. Select manually only r8125, acpi stuff and i915 (if you have intel gpu). No any other drivers especially from realtek.
6. Build the loader then boot it.

Booting should take about 3 minutes or less. Never longer then 4 minutes for me. Reset pc if not successful and try 2-3 times.

[marboroman]

Actually nothing particular helps 100%. It suddenly starts loading successfully and then it can load 20 times without problems. And on another day it can’t be loaded in any way. You sit for several hours and do not understand what's going on.

[wjz304]

there is magic

[wjz304]

There should still be an incompatible driver, perhaps some processes suddenly used it

[wjz304]

No further feedback, this issue has been closed. If there are any issues, please create a new issue