Str.pod6

=begin pod

=TITLE class Str

=SUBTITLE String of characters

    class Str is Cool does Stringy { }

Built-in class for strings. Objects of type C<Str> are immutable.

=head1 Methods

=head2 routine chop

    multi sub    chop(Str:D --> Str:D)
    multi method chop(Str:D: $chars = 1 --> Str:D)

Returns the string with C<$chars> characters removed from the end.

=head2 routine chomp

Defined as:

    multi sub    chomp(Str:D  --> Str:D)
    multi method chomp(Str:D: --> Str:D)

Returns the string with a logical newline (any codepoint that has the
C<NEWLINE> property) removed from the end.

Examples:

    say chomp("abc\n");       # OUTPUT: «abc␤»
    say "def\r\n".chomp;      # OUTPUT: «def␤» NOTE: \r\n is a single grapheme!
    say "foo\r".chomp;        # OUTPUT: «foo␤»

=head2 routine lc

Defined as:

    multi sub    lc(Str:D  --> Str:D)
    multi method lc(Str:D: --> Str:D)

Returns a lower-case version of the string.

Examples:

    lc("A"); # RESULT: «"a"»
    "A".lc;  # RESULT: «"a"»

=head2 routine uc

    multi sub    uc(Str:D  --> Str:D)
    multi method uc(Str:D: --> Str:D)

Returns an uppercase version of the string.

=head2 routine fc

    multi sub    fc(Str:D  --> Str:D)
    multi method fc(Str:D: --> Str:D)

Does a Unicode "fold case" operation suitable for doing caseless
string comparisons.  (In general, the returned string is unlikely to
be useful for any purpose other than comparison.)

=head2 routine tc

    multi sub    tc(Str:D  --> Str:D)
    multi method tc(Str:D: --> Str:D)

Does a Unicode "titlecase" operation, that is changes the first character in
the string to title case, or to upper case if the character has no title case
mapping

=head2 routine tclc

    multi sub    tclc(Str:D  --> Str:D)
    multi method tclc(Str:D: --> Str:D)

Turns the first character to title case, and all other characters to lower
case

=head2 routine wordcase

=for code
multi sub    wordcase(Cool $x  --> Str)
multi sub    wordcase(Str:D $x --> Str)
multi method wordcase(Str:D: :&filter = &tclc, Mu :$where = True --> Str)

Returns a string in which C<&filter> has been applied to all the words
that match C<$where>. By default, this means that the first letter of
every word is capitalized, and all the other letters lowercased.

=head2 method unival

    multi method unival(Str:D --> Numeric)

Returns the numeric value that the first codepoint in the invocant represents,
or C<NaN> if it's not numeric.

    say '4'.unival;     # OUTPUT: «4␤»
    say '¾'.unival;     # OUTPUT: «0.75␤»
    say 'a'.unival;     # OUTPUT: «NaN␤»

=head2 method univals

    multi method univals(Str:D --> List)

Returns a list of numeric values represented by each codepoint in the invocant
string, and C<NaN> for non-numeric characters.

    say "4a¾".univals;  # OUTPUT: «(4 NaN 0.75)␤»

=head2 routine chars

    multi sub    chars(Cool  $x --> Int:D)
    multi sub    chars(Str:D $x --> Int:D)
    multi sub    chars(str   $x --> int)
    multi method chars(Str:D:   --> Int:D)

Returns the number of characters in the string in graphemes. On the JVM,
this currently erroneously returns the number of codepoints instead.

=head2 method encode

    multi method encode(Str:D $encoding = 'utf8', :$replacement, Bool() :$translate-nl = False, :$strict)

Returns a L<Blob> which represents the original string in the given
encoding and normal form. The actual return type is as specific as
possible, so C<$str.encode('UTF-8')> returns a C<utf8> object,
C<$str.encode('ISO-8859-1')> a C<buf8>. If C<:translate-nl> is set to
C<True>, it will translate newlines from C<\n> to C<\n\r>, but only in
Windows. C<$replacement> indicates how characters are going to be
replaced in the case they are not available in the current encoding,
while C<$strict> indicates whether unmapped codepoints will still
decode; for instance, codepoint 129 which does not exist in
C<windows-1252>.

    my $str = "Þor is mighty";
    say $str.encode("ascii", :replacement( 'Th') ).decode("ascii");
    # OUTPUT: «Thor is mighty␤»

In this case, any unknown character is going to be substituted by C<Th>. We know
in advance that the character that is not known in the C<ascii> encoding is
C<Þ>, so we substitute it by its latin equivalent, C<Th>. In the absence of any
replacement set of characters, C<:replacement> is understood as a C<Bool>:

=for code :preamble<my $str = "Þor is mighty";>
say $str.encode("ascii", :replacement).decode("ascii"); # OUTPUT: «?or is mighty␤»

If C<:replacement> is not set or assigned a value, the error C<Error encoding
ASCII string: could not encode codepoint 222> will be issued.

=head2 routine index

    multi sub    index(Cool $s, Str:D $needle, Cool $startpos = 0 --> Int)
    multi method index(Cool $needle, Cool $startpos = 0 --> Int)

Searches for C<$needle> in the string starting from C<$startpos>. It returns
the offset into the string where C<$needle> was found, and C<Nil> if it was not
found.

Examples:

    say index "Camelia is a butterfly", "a";     # OUTPUT: «1␤»
    say index "Camelia is a butterfly", "a", 2;  # OUTPUT: «6␤»
    say index "Camelia is a butterfly", "er";    # OUTPUT: «17␤»
    say index "Camelia is a butterfly", "Camel"; # OUTPUT: «0␤»
    say index "Camelia is a butterfly", "Onion"; # OUTPUT: «Nil␤»

    say index("Camelia is a butterfly", "Onion").defined ?? 'OK' !! 'NOT'; # OUTPUT: «NOT␤»

=head2 routine rindex

    multi sub    rindex(Str:D $haystack, Str:D $needle, Int $startpos = $haystack.chars --> Int)
    multi method rindex(Str:D $haystack: Str:D $needle, Int $startpos = $haystack.chars --> Int)

Returns the last position of C<$needle> in C<$haystack> not after C<$startpos>.
Returns C<Nil> if C<$needle> wasn't found.

Examples:

    say rindex "Camelia is a butterfly", "a";     # OUTPUT: «11␤»
    say rindex "Camelia is a butterfly", "a", 10; # OUTPUT: «6␤»

=head2 method indices

Defined as:

    multi method indices(Str:D: Str:D $needle, :$overlap --> List:D)
    multi method indices(Str:D: Str:D $needle, Int:D $start, :$overlap --> List:D)

Searches for all occurrences of C<$needle> in the string starting from position
C<$start>, or zero if it is not specified, and returns a C<List> with all offsets
in the string where C<$needle> was found, or an empty list if it was not found.

If the optional parameter C<:overlap> is specified the search continues from the
index directly following the previous match, otherwise the search will continue
after the previous match.

    say "banana".indices("a");              # OUTPUT: «(1 3 5)␤»
    say "banana".indices("ana");            # OUTPUT: «(1)␤»
    say "banana".indices("ana", :overlap);  # OUTPUT: «(1 3)␤»
    say "banana".indices("ana", 2);         # OUTPUT: «(3)␤»

=head2 method match

    method match($pat, :continue(:$c), :pos(:$p), :global(:$g), :overlap(:$ov), :exhaustive(:$ex), :st(:$nd), :rd(:$th), :$nth, :$x --> Match)

Performs a match of the string against C<$pat> and returns a L<Match> object if
there is a successful match; it returns C<(Any)> otherwise. Matches are stored in the
L<default match variable C<$/>|/language/variables#index-entry-match_variable>.
If C<$pat> is not a L<Regex> object, match will coerce the argument to a
Str and then perform a literal match against C<$pat>.

A number of optional named parameters can be specified, which alter how the match is performed.

=item :continue

The C<:continue> adverb takes as an argument the position where the regex should
start to search. If no position is specified for C<:c> it will default to 0
unless C<$/> is set, in which case it defaults to C<$/.to>.

=item :pos

Takes a position as an argument. Fails if regex cannot be matched from that position, unlike C<:continue>.

=item :global

Instead of searching for just one match and returning a C<Match> object, search
for every non-overlapping match and return them in a C<List>.

=item :overlap

Finds all matches including overlapping matches, but only returns one match from
each starting position.

=item :exhaustive

Finds all possible matches of a regex, including overlapping matches and matches
that start at the same position.

=item :st, :nd, :rd, :nth

Returns the nth match in the string. The argument can be a L<Numeric> or
an L<Iterable> producing monotonically increasing numbers (that is, the
next produced number must be larger than the previous one). The L<Iterable>
will be lazily L<reified|/language/glossary#index-entry-Reify> and if
non-monotonic sequence is encountered an exception will be thrown.

If L<Iterable> argument is provided the return value and C<$/> variable
will be set to a possibly-empty L<List> of L<Match> objects.

=item :x

Takes as an argument the number of matches to return, stopping once the
specified number of matches has been reached. The value must be a L<Numeric> or
a L<Range>; other values will cause C<.match> to return a L<Failure> containing
C<X::Str::Match::x> exception.

Examples:
=begin code

say "properly".match('perl');                     # OUTPUT: «｢perl｣␤»
say "properly".match(/p.../);                     # OUTPUT: «｢prop｣␤»
say "1 2 3".match([1,2,3]);                       # OUTPUT: «｢1 2 3｣␤»
say "a1xa2".match(/a./, :continue(2));            # OUTPUT: «｢a2｣␤»
say "abracadabra".match(/ a .* a /, :exhaustive);
# OUTPUT: «(｢abracadabra｣ ｢abracada｣ ｢abraca｣ ｢abra｣ ｢acadabra｣ ｢acada｣ ｢aca｣ ｢adabra｣ ｢ada｣ ｢abra｣)␤»
say 'several words here'.match(/\w+/,:global);    # OUTPUT: «(｢several｣ ｢words｣ ｢here｣)␤»
say 'abcdef'.match(/.*/, :pos(2));                # OUTPUT: «｢cdef｣␤»
say "foo[bar][baz]".match(/../, :1st);            # OUTPUT: «｢fo｣␤»
say "foo[bar][baz]".match(/../, :2nd);            # OUTPUT: «｢o[｣␤»
say "foo[bar][baz]".match(/../, :3rd);            # OUTPUT: «｢ba｣␤»
say "foo[bar][baz]".match(/../, :4th);            # OUTPUT: «｢r]｣␤»
say "foo[bar][baz]bada".match('ba', :x(2));       # OUTPUT: «(｢ba｣ ｢ba｣)␤»
=end code

=head2 method Numeric

Defined as:

    method Numeric(Str:D: --> Numeric:D)

Coerces the string to L<Numeric>. L<Fails|/routine/fail> with C<X::Str::Numeric>
if the coercion cannot be done.

Only Unicode characters with property C<Nd>, as well as leading and trailing
whitespace are allowed, with the special case of the empty string being coerced
to C<0>. Synthetic codepoints (e.g. C<"7\x[308]">) are forbidden.

While C<Nl> and C<No> characters can be used as numeric literals
in the language, their conversion via C<Str.Numeric> will fail, by design.
See L«unival|/routine/unival» if you need to coerce such characters to
C<Numeric>.

=head2 method Int

Defined as:

    method Int(Str:D: --> Int:D)

Coerces the string to L<Int>, using the same rules as
L«C<Str.Numeric>|/type/Str#method_Numeric>».

=head2 method Rat

Defined as:

    method Rat(Str:D: --> Rational:D)

Coerces the string to a L<Rat> object, using the same rules as
L«C<Str.Numeric>|/type/Str#method_Numeric>». If the denominator is larger
than 64-bits is it still kept and no degradation to L<Num> occurs.

=head2 method Bool

Defined as:

    method Bool(Str:D: --> Bool:D)

Returns C<False> if the string is empty, C<True> otherwise.

=head2 routine parse-base

    multi sub    parse-base(Str:D $num, Int:D $radix --> Numeric)
    multi method parse-base(Str:D $num: Int:D $radix --> Numeric)

Performs the reverse of L«C<base>|/routine/base» by converting a string
with a base-C<$radix> number to its L«C<Numeric>|/type/Numeric»
equivalent. Will L«C<fail>|/routine/fail» if radix is not in range C<2..36>
or of the string being parsed contains characters that are not valid
for the specified base.

    1337.base(32).parse-base(32).say; # OUTPUT: «1337␤»
    'Perl6'.parse-base(30).say;       # OUTPUT: «20652936␤»
    'FF.DD'.parse-base(16).say;       # OUTPUT: «255.863281␤»

See also: L«:16<FF> syntax for number literals|/syntax/Number%20literals»

=head2 routine parse-names

    sub    parse-names(Str:D $names  --> Str:D)
    method parse-names(Str:D $names: --> Str:D)

B<DEPRECATED>. Existed only in pre-release proposal version of 6.d language and
was eventually renamed to L<uniparse>. In Rakudo implementation,
issues deprecation warnings in 6.d language and will be removed entirely when
6.e language is released.

=head2 routine uniparse

    sub    uniparse(Str:D $names  --> Str:D)
    method uniparse(Str:D $names: --> Str:D)

Takes string with comma-separated Unicode names of characters and
returns a string composed of those characters. Will L«C<fail>|/routine/fail»
if any of the characters' names are empty or not recognized. Whitespace
around character names is ignored.

    say "I {uniparse 'TWO HEARTS'} Perl"; # OUTPUT: «I 💕 Perl␤»
    'TWO HEARTS, BUTTERFLY'.uniparse.say; # OUTPUT: «💕🦋␤»

Note that unlike C<\c[...]> construct available in string interpolation,
C<uniparse> does not accept decimal numerical values. Use L<chr> routine to
convert those:

    say "\c[1337]"; # OUTPUT: «Թ␤»
    say '1337'.chr; # OUTPUT: «Թ␤»

I<Note:> before being standardized in 2017.12, this routine was known
under its working name of L<parse-names>. This denomination will be removed in the 6.e version.

=head2 routine split

=for code :method
multi sub    split(  Str:D $delimiter, Str:D $input, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)
=for code :method
multi sub    split(Regex:D $delimiter, Str:D $input, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)
=for code :method
multi sub    split(List:D $delimiters, Str:D $input, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)
=for code :method
multi method split(Str:D:   Str:D $delimiter, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)
=for code :method
multi method split(Str:D: Regex:D $delimiter, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)
=for code :method
multi method split(Str:D: List:D $delimiters, $limit = Inf,
  :$skip-empty, :$v, :$k, :$kv, :$p --> Positional)

Splits a string up into pieces based on delimiters found in the string.

If C<DELIMITER> is a string, it is searched for literally and not treated
as a regex.  If C<DELIMITER> is the empty string, it effectively returns all
characters of the string separately (plus an empty string at the begin and at
the end).  If C<PATTERN> is a regular expression, then that will be used
to split up the string.  If C<DELIMITERS> is a list, then all of its elements
will be considered a delimiter (either a string or a regular expression) to
split the string on.

The optional C<LIMIT> indicates in how many segments the string should be
split, if possible.  It defaults to B<Inf> (or B<*>, whichever way you look at
it), which means "as many as possible". Note that specifying negative limits
will not produce any meaningful results.

A number of optional named parameters can be specified, which alter the
result being returned.  The C<:v>, C<:k>, C<:kv> and C<:p> named parameters
all perform a special action with regards to the delimiter found.

=item :skip-empty

If specified, do not return empty strings before or after a delimiter.

=item :v

Also return the delimiter.  If the delimiter was a regular expression, then
this will be the associated C<Match> object. Since this stringifies as the
delimiter string found, you can always assume it is the delimiter string if
you're not interested in further information about that particular match.

=item :k

Also return the B<index> of the delimiter.  Only makes sense if a list of
delimiters was specified: in all other cases, this will be B<0>.

=item :kv

Also return both the B<index> of the delimiter, as well as the delimiter.

=item :p

Also return the B<index> of the delimiter and the delimiter as a C<Pair>.

Examples:

    say split(";", "a;b;c").perl;           # OUTPUT: «("a", "b", "c").Seq␤»
    say split(";", "a;b;c", :v).perl;       # OUTPUT: «("a", ";", "b", ";", "c").Seq␤»
    say split(";", "a;b;c", 2).perl;        # OUTPUT: «("a", "b;c").Seq␤»
    say split(";", "a;b;c", 2, :v).perl;    # OUTPUT: «("a", ";", "b;c").Seq␤»
    say split(";", "a;b;c,d").perl;         # OUTPUT: «("a", "b", "c,d").Seq␤»
    say split(/\;/, "a;b;c,d").perl;        # OUTPUT: «("a", "b", "c,d").Seq␤»
    say split(<; ,>, "a;b;c,d").perl;       # OUTPUT: «("a", "b", "c", "d").Seq␤»
    say split(/<[;,]>/, "a;b;c,d").perl;    # OUTPUT: «("a", "b", "c", "d").Seq␤»
    say split(<; ,>, "a;b;c,d", :k).perl;   # OUTPUT: «("a", 0, "b", 0, "c", 1, "d").Seq␤»
    say split(<; ,>, "a;b;c,d", :kv).perl;  # OUTPUT: «("a", 0, ";", "b", 0, ";", "c", 1, ",", "d").Seq␤»

    say "".split("x").perl;                 # OUTPUT: «("",).Seq␤»
    say "".split("x", :skip-empty).perl;    # OUTPUT: «().Seq␤»

    say "abcde".split("").perl;             # OUTPUT: «("", "a", "b", "c", "d", "e", "").Seq␤»
    say "abcde".split("",:skip-empty).perl; # OUTPUT: «("a", "b", "c", "d", "e").Seq␤»

=head2 routine comb

    multi sub    comb(Str:D   $matcher, Str:D $input, $limit = Inf)
    multi sub    comb(Regex:D $matcher, Str:D $input, $limit = Inf, Bool :$match)
    multi sub    comb(Int:D $size, Str:D $input, $limit = Inf)
    multi method comb(Str:D $input:)
    multi method comb(Str:D $input: Str:D   $matcher, $limit = Inf)
    multi method comb(Str:D $input: Regex:D $matcher, $limit = Inf, Bool :$match)
    multi method comb(Str:D $input: Int:D $size, $limit = Inf)

Searches for C<$matcher> in C<$input> and returns a list of non-overlapping
matches limited to at most C<$limit> matches.  If C<$matcher> is a Regex,
each C<Match> object is converted to a C<Str>, unless C<$match> is set.

If no matcher is supplied, a list of characters in the string is returned,
as if the matcher was C<rx/./>.

Examples:

    say "abc".comb.perl;                 # OUTPUT: «("a", "b", "c").Seq␤»
    say 'abcdefghijk'.comb(3).perl;      # OUTPUT: «("abc", "def", "ghi", "jk").Seq␤»
    say 'abcdefghijk'.comb(3, 2).perl;   # OUTPUT: «("abc", "def").Seq␤»
    say comb(/\w/, "a;b;c").perl;        # OUTPUT: «("a", "b", "c").Seq␤»
    say comb(/\N/, "a;b;c").perl;        # OUTPUT: «("a", ";", "b", ";", "c").Seq␤»
    say comb(/\w/, "a;b;c", 2).perl;     # OUTPUT: «("a", "b").Seq␤»
    say comb(/\w\;\w/, "a;b;c", 2).perl; # OUTPUT: «("a;b",).Seq␤»
    say comb(/.<(.)>/, "<>[]()").perl;   # OUTPUT: «(">", "]", ")").Seq␤»

If the matcher is an integer value, C<comb> behaves as if the matcher
was C<rx/ . ** {$matcher} />, but which is optimized to be much faster.

Note that a Regex matcher may control which portion of the matched text
is returned by using features which explicitly set the top-level capture.

=head2 routine lines

    multi sub    lines(Str:D $input, $limit = Inf --> Positional)
    multi method lines(Str:D $input: $limit = Inf --> Positional)

Returns a list of lines (without trailing newline characters), i.e. the
same as a call to C<$input.comb( / ^^ \N* /, $limit )> would.

Examples:

    say lines("a\nb").perl;    # OUTPUT: «("a", "b").Seq␤»
    say lines("a\nb").elems;   # OUTPUT: «2␤»
    say "a\nb".lines.elems;    # OUTPUT: «2␤»
    say "a\n".lines.elems;     # OUTPUT: «1␤»

=head2 routine words

    multi sub    words(Str:D $input, $limit = Inf --> Positional)
    multi method words(Str:D $input: $limit = Inf --> Positional)

Returns a list of non-whitespace bits, i.e. the same as a call to
C<$input.comb( / \S+ /, $limit )> would.

Examples:

    say "a\nb\n".words.perl;       # OUTPUT: «("a", "b").Seq␤»
    say "hello world".words.perl;  # OUTPUT: «("hello", "world").Seq␤»
    say "foo:bar".words.perl;      # OUTPUT: «("foo:bar",).Seq␤»
    say "foo:bar\tbaz".words.perl; # OUTPUT: «("foo:bar", "baz").Seq␤»

=head2 routine flip

    multi sub    flip(Str:D  --> Str:D)
    multi method flip(Str:D: --> Str:D)

Returns the string reversed character by character.

Examples:

    "Perl".flip;  # RESULT: «lreP»
    "ABBA".flip;  # RESULT: «ABBA»

=head2 routine sprintf

 multi sub sprintf( Str:D $format, *@args --> Str:D)

This function is mostly identical to the C library C<sprintf> and
C<printf> functions.  The only difference between the two
functions is that C<sprintf> returns a string while the C<printf> function
writes to a filehandle. C<sprintf> returns a C<Str>, not a literal.

The C<$format> is scanned for C<%> characters. Any C<%> introduces a
format token. Format tokens have the following grammar:

 grammar Str::SprintfFormat {
  regex format_token { '%': <index>? <precision>? <modifier>? <directive> }
  token index { \d+ '$' }
  token precision { <flags>? <vector>? <precision_count> }
  token flags { <[ \x20 + 0 \# \- ]>+ }
  token precision_count { [ <[1..9]>\d* | '*' ]? [ '.' [ \d* | '*' ] ]? }
  token vector { '*'? v }
  token modifier { < ll l h V q L > }
  token directive { < % c s d u o x e f g X E G b p n i D U O F > }
 }

Directives guide the use (if any) of the arguments. When a directive
(other than C<%>) is used, it indicates how the next argument
passed is to be formatted into the string to be created.

NOTE: The information below is for a fully functioning C<sprintf>
implementation which hasn't been achieved yet. Formats or features not
yet implemented are marked NYI.

The directives are:

=begin table

 % |  a literal percent sign
 c |  a character with the given codepoint
 s |  a string
 d |  a signed integer, in decimal
 u |  an unsigned integer, in decimal
 o |  an unsigned integer, in octal
 x |  an unsigned integer, in hexadecimal
 e |  a floating-point number, in scientific notation
 f |  a floating-point number, in fixed decimal notation
 g |  a floating-point number, in %e or %f notation
 X |  like x, but using uppercase letters
 E |  like e, but using an uppercase "E"
 G |  like g, but with an uppercase "E" (if applicable)
 b |  an unsigned integer, in binary

=end table

Compatibility:

=begin table

 i |  a synonym for %d
 D |  a synonym for %ld
 U |  a synonym for %lu
 O |  a synonym for %lo
 F |  a synonym for %f

=end table

Modifiers change the meaning of format directives, but are largely
no-ops (the semantics are still being determined).

=begin table

     | h  | interpret integer as native "short" (typically int16)
 NYI | l  | interpret integer as native "long" (typically int32 or int64)
 NYI | ll | interpret integer as native "long long" (typically int64)
 NYI | L  | interpret integer as native "long long" (typically uint64)
 NYI | q  | interpret integer as native "quads" (typically int64 or larger)

=end table

Between the C<%> and the format letter, you may specify several
additional attributes controlling the interpretation of the format. In
order, these are:

B<format parameter index>

An explicit format parameter index, such as C<2$>. By default,
C<sprintf> will format the next unused argument in the list, but this
allows you to take the arguments out of order:

  sprintf '%2$d %1$d', 12, 34;      # OUTPUT: «34 12␤»
  sprintf '%3$d %d %1$d', 1, 2, 3;  # OUTPUT: «3 1 1␤»

B<flags>

One or more of:

=begin table
   space |  prefix non-negative number with a space
   +     |  prefix non-negative number with a plus sign
   -     |  left-justify within the field
   0     |  use leading zeros, not spaces, for required padding
   #     |  ensure the leading "0" for any octal,
         |  prefix non-zero hexadecimal with "0x" or "0X",
         |  prefix non-zero binary with "0b" or "0B"
=end table

For example:

  sprintf '<% d>',  12;   # RESULT: «< 12>␤»
  sprintf '<% d>',   0;   # RESULT: «< 0>"»
  sprintf '<% d>', -12;   # RESULT: «<-12>␤»
  sprintf '<%+d>',  12;   # RESULT: «<+12>␤»
  sprintf '<%+d>',   0;   # RESULT: «<+0>"»
  sprintf '<%+d>', -12;   # RESULT: «<-12>␤»
  sprintf '<%6s>',  12;   # RESULT: «<    12>␤»
  sprintf '<%-6s>', 12;   # RESULT: «<12    >␤»
  sprintf '<%06s>', 12;   # RESULT: «<000012>␤»
  sprintf '<%#o>',  12;   # RESULT: «<014>␤»
  sprintf '<%#x>',  12;   # RESULT: «<0xc>␤»
  sprintf '<%#X>',  12;   # RESULT: «<0XC>␤»
  sprintf '<%#b>',  12;   # RESULT: «<0b1100>␤»
  sprintf '<%#B>',  12;   # RESULT: «<0B1100>␤»

When a space and a plus sign are given as the flags at once, the space
is ignored:

  sprintf '<%+ d>', 12;   # RESULT: «<+12>␤»
  sprintf '<% +d>', 12;   # RESULT: «<+12>␤»

When the C<#> flag and a precision are given in the C<%o> conversion, the necessary number of 0s is added at the beginning. If the value of the number is C<0> and the precision is 0, it will output nothing; precision 0 or smaller than the actual number of elements will return the number with 0 to the left:

  say sprintf '<%#.5o>', 0o12;     # OUTPUT: «<00012>␤»
  say sprintf '<%#.5o>', 0o12345;  # OUTPUT: «<012345>␤»
  say sprintf '<%#.0o>', 0;        # OUTPUT: «<>␤» zero precision and value 0 results in no output!
  say sprintf '<%#.0o>', 0o1       # OUTPUT: «<01>␤»

B<vector flag>

This flag tells Perl 6 to interpret the supplied string as a vector of
integers, one for each character in the string. Perl 6 applies the
format to each integer in turn, then joins the resulting strings with
a separator (a dot, C<'.'>, by default). This can be useful for
displaying ordinal values of characters in arbitrary strings:

=begin code :skip-test
  NYI sprintf "%vd", "AB\x{100}";           # "65.66.256"
=end code

You can also explicitly specify the argument number to use for the
join string using something like C<*2$v>; for example:

=begin code :skip-test
  NYI sprintf '%*4$vX %*4$vX %*4$vX',       # 3 IPv6 addresses
          @addr[1..3], ":";
=end code

B<(minimum) width>

Arguments are usually formatted to be only as wide as required to
display the given value. You can override the width by putting a
number here, or get the width from the next argument (with C<*> ) or
from a specified argument (e.g., with C<*2$>):

 sprintf "<%s>", "a";           # RESULT: «<a>␤»
 sprintf "<%6s>", "a";          # RESULT: «<     a>␤»
 sprintf "<%*s>", 6, "a";       # RESULT: «<     a>␤»
=begin code :skip-test
 NYI sprintf '<%*2$s>', "a", 6; # "<     a>"
=end code
 sprintf "<%2s>", "long";       # RESULT: «<long>␤» (does not truncate)

If a field width obtained through C<*> is negative, it has the same
effect as the C<-> flag: left-justification.

B<precision, or maximum width>

You can specify a precision (for numeric conversions) or a maximum
width (for string conversions) by specifying a C<.> followed by a
number. For floating-point formats, except C<g> and C<G>, this
specifies how many places right of the decimal point to show (the
default being 6). For example:

  # these examples are subject to system-specific variation
  sprintf '<%f>', 1;    # RESULT: «"<1.000000>"␤»
  sprintf '<%.1f>', 1;  # RESULT: «"<1.0>"␤»
  sprintf '<%.0f>', 1;  # RESULT: «"<1>"␤»
  sprintf '<%e>', 10;   # RESULT: «"<1.000000e+01>"␤»
  sprintf '<%.1e>', 10; # RESULT: «"<1.0e+01>"␤»

For "g" and "G", this specifies the maximum number of digits to show,
including those prior to the decimal point and those after it; for
example:

  # These examples are subject to system-specific variation.
  sprintf '<%g>', 1;        # RESULT: «<1>␤»
  sprintf '<%.10g>', 1;     # RESULT: «<1>␤»
  sprintf '<%g>', 100;      # RESULT: «<100>␤»
  sprintf '<%.1g>', 100;    # RESULT: «<1e+02>␤»
  sprintf '<%.2g>', 100.01; # RESULT: «<1e+02>␤»
  sprintf '<%.5g>', 100.01; # RESULT: «<100.01>␤»
  sprintf '<%.4g>', 100.01; # RESULT: «<100>␤»

For integer conversions, specifying a precision implies that the
output of the number itself should be zero-padded to this width, where
the C<0> flag is ignored:

(Note that this feature currently works for unsigned integer conversions, but not
for signed integer.)

  =begin code :skip-test
  sprintf '<%.6d>', 1;      # <000001>
  NYI sprintf '<%+.6d>', 1;     # <+000001>
  NYI sprintf '<%-10.6d>', 1;   # <000001    >
  sprintf '<%10.6d>', 1;    # <    000001>
  NYI sprintf '<%010.6d>', 1;   #     000001>
  NYI sprintf '<%+10.6d>', 1;   # <   +000001>
  sprintf '<%.6x>', 1;         # RESULT: «<000001>␤»
  sprintf '<%#.6x>', 1;        # RESULT: «<0x000001>␤»
  sprintf '<%-10.6x>', 1;      # RESULT: «<000001    >␤»
  sprintf '<%10.6x>', 1;       # RESULT: «<    000001>␤»
  sprintf '<%010.6x>', 1;      # RESULT: «<    000001>␤»
  sprintf '<%#10.6x>', 1;      # RESULT: «<  0x000001>␤»
  =end code

For string conversions, specifying a precision truncates the string to
fit the specified width:

  sprintf '<%.5s>', "truncated";   # RESULT: «<trunc>␤»
  sprintf '<%10.5s>', "truncated"; # RESULT: «<     trunc>␤»

You can also get the precision from the next argument using C<.*>, or
from a specified argument (e.g., with C<.*2$>):

  =begin code :skip-test
  sprintf '<%.6x>', 1;       # RESULT: «<000001>␤»
  sprintf '<%.*x>', 6, 1;    # RESULT: «<000001>␤»
  NYI sprintf '<%.*2$x>', 1, 6;  # "<000001>"
  NYI sprintf '<%6.*2$x>', 1, 4; # "<  0001>"
  =end code

If a precision obtained through C<*> is negative, it counts as having
no precision at all:

  sprintf '<%.*s>',  7, "string";   # RESULT: «<string>␤»
  sprintf '<%.*s>',  3, "string";   # RESULT: «<str>␤»
  sprintf '<%.*s>',  0, "string";   # RESULT: «<>␤»
  sprintf '<%.*s>', -1, "string";   # RESULT: «<string>␤»
  sprintf '<%.*d>',  1, 0;          # RESULT: «<0>␤»
  sprintf '<%.*d>',  0, 0;          # RESULT: «<>␤»
  sprintf '<%.*d>', -1, 0;          # RESULT: «<0>␤»

B<size>

For numeric conversions, you can specify the size to interpret the
number as using C<l>, C<h>, C<V>, C<q>, C<L>, or C<ll>. For integer
conversions (C<d> C<u> C<o> C<x> C<X> C<b> C<i> C<D> C<U> C<O>),
numbers are usually assumed to be whatever the default integer size is
on your platform (usually 32 or 64 bits), but you can override this to
use instead one of the standard C types, as supported by the compiler
used to build Perl 6:

(Note: None of the following have been implemented.)

=begin table

   hh          | interpret integer as C type "char" or "unsigned char"
   h           | interpret integer as C type "short" or "unsigned short"
   j           | interpret integer as C type "intmax_t", only with a C99 compiler (unportable)
   l           | interpret integer as C type "long" or "unsigned long"
   q, L, or ll | interpret integer as C type "long long", "unsigned long long", or "quad" (typically 64-bit integers)
   t           | interpret integer as C type "ptrdiff_t"
   z           | interpret integer as C type "size_t"
=end table

B<order of arguments>

Normally, C<sprintf> takes the next unused argument as the value to
format for each format specification. If the format specification uses
C<*> to require additional arguments, these are consumed from the
argument list in the order they appear in the format specification
before the value to format. Where an argument is specified by an
explicit index, this does not affect the normal order for the
arguments, even when the explicitly specified index would have been
the next argument.

So:

   my $a = 5; my $b = 2; my $c = 'net';
   sprintf "<%*.*s>", $a, $b, $c; # RESULT: «<   ne>␤»

uses C<$a> for the width, C<$b> for the precision, and C<$c> as the value to
format; while:

=for code :skip-test
  NYI sprintf '<%*1$.*s>', $a, $b;

would use C<$a> for the width and precision and C<$b> as the value to format.

Here are some more examples; be aware that when using an explicit
index, the C<$> may need escaping:

=for code :skip-test
 sprintf "%2\$d %d\n",      12, 34;     # RESULT: «34 12␤␤»
 sprintf "%2\$d %d %d\n",   12, 34;     # RESULT: «34 12 34␤␤»
 sprintf "%3\$d %d %d\n",   12, 34, 56; # RESULT: «56 12 34␤␤»
 NYI sprintf "%2\$*3\$d %d\n",  12, 34,  3; # " 34 12\n"
 NYI sprintf "%*1\$.*f\n",       4,  5, 10; # "5.0000\n"

=comment TODO: document effects of locale

Other examples:

=for code :skip-test
 NYI sprintf "%ld a big number", 4294967295;
 NYI sprintf "%%lld a bigger number", 4294967296;
 sprintf('%c', 97);                  # RESULT: «a␤»
 sprintf("%.2f", 1.969);             # RESULT: «1.97␤»
 sprintf("%+.3f", 3.141592);         # RESULT: «+3.142␤»
 sprintf('%2$d %1$d', 12, 34);       # RESULT: «34 12␤»
 sprintf("%x", 255);                 # RESULT: «ff␤»

Special case: C«sprintf("<b>%s</b>\n", "Perl 6")» will not work, but
one of the following will:

 sprintf Q:b "<b>%s</b>\n",  "Perl 6"; # RESULT: «<b>Perl 6</b>␤␤»
 sprintf     "<b>\%s</b>\n", "Perl 6"; # RESULT: «<b>Perl 6</b>␤␤»
 sprintf     "<b>%s\</b>\n", "Perl 6"; # RESULT: «<b>Perl 6</b>␤␤»

=head2 method starts-with

    multi method starts-with(Str:D: Str(Cool) $needle --> Bool:D)

Returns C<True> if the invocant is identical to or starts with C<$needle>.

    say "Hello, World".starts-with("Hello");     # OUTPUT: «True␤»
    say "https://perl6.org/".starts-with('ftp'); # OUTPUT: «False␤»

=head2 method ends-with

    multi method ends-with(Str:D: Str(Cool) $needle --> Bool:D)

Returns C<True> if the invocant is identical to or ends with C<$needle>.

    say "Hello, World".ends-with('Hello');      # OUTPUT: «False␤»
    say "Hello, World".ends-with('ld');         # OUTPUT: «True␤»

=head2 method subst

    multi method subst(Str:D: $matcher, $replacement, *%opts)

Returns the invocant string where C<$matcher> is replaced by C<$replacement>
(or the original string, if no match was found).

There is an in-place syntactic variant of C<subst> spelled
L«C<s/matcher/replacement/>|/syntax/s$SOLIDUS%20$SOLIDUS%20$SOLIDUS» and with
adverb following the C<s> or inside the matcher.

C<$matcher> can be a L<Regex>, or a literal C<Str>. Non-Str matcher arguments
of type L<Cool> are coerced to C<Str> for literal matching.
If a L<Regex> C<$matcher> is used, the
L«C<$/> special variable|/syntax/$$SOLIDUS» will be set to C<Nil> (if no
matches occurred), a L<Match> object, or a L<List> of L<Match> objects (if
multi-match options like C<:g> are used).

=head3 Literal replacement substitution

    my $some-string = "Some foo";
    my $another-string = $some-string.subst(/foo/, "string"); # gives 'Some string'
    $some-string.=subst(/foo/, "string"); # in-place substitution. $some-string is now 'Some string'

=head3 Callable

The replacement can be a L<Callable> in which the current L<Match> object will
be placed in the C<$/> variable, as well as the C<$_> topic variable. Using a
L<Callable> as replacement is how you can refer to any of the captures created
in the regex:

    # Using capture from $/ variable (the $0 is the first positional capture)
    say 'abc123defg'.subst(/(\d+)/, { " before $0 after " });
    # OUTPUT: «abc before 123 after defg␤»

    # Using capture from $/ variable (the $<foo> is a named capture)
    say 'abc123defg'.subst(/$<foo>=\d+/, { " before $<foo> after " });
    # OUTPUT: «abc before 123 after defg␤»

    # Using WhateverCode to operate on the Match given in $_:
    say 'abc123defg'.subst(/(\d+)/, "[ " ~ *.flip ~ " ]");
    # OUTPUT: «abc[ 321 ]defg␤»

    # Using a Callable to generate substitution without involving current Match:
    my $i = 41;
    my $str = "The answer is secret.";
    say $str.subst(/secret/, {++$i}); # The answer to everything
    # OUTPUT: «The answer is 42.␤»

=head3 Adverbs

The following adverbs are supported

=begin table

    short                       | long        | meaning
    ============================+=============+================
    :g                          | :global     | tries to match as often as possible
    :nth(Int|Callable|Whatever) |             | only substitute the nth match; aliases: :st, :nd, :rd, and :th
    :ss                         | :samespace  | preserves whitespace on substitution
    :ii                         | :samecase   | preserves case on substitution
    :mm                         | :samemark   | preserves character marks (e.g. 'ü' replaced with 'o' will result in 'ö')
    :x(Int|Range|Whatever)      |             | substitute exactly $x matches

=end table

Note that only in the C<s///> form C<:ii> implies C<:i> and C<:ss> implies
C<:s>. In the method form, the C<:s> and C<:i> modifiers must be added to the
regex, not the C<subst> method call.


=head3 More Examples

Here are other examples of usage:

    my $str = "Hey foo foo foo";
    $str.subst(/foo/, "bar", :g); # global substitution - returns Hey bar bar bar

    $str.subst(/foo/, "no subst", :x(0)); # targeted substitution. Number of times to substitute. Returns back unmodified.
    $str.subst(/foo/, "bar", :x(1)); #replace just the first occurrence.

    $str.subst(/foo/, "bar", :nth(3)); # replace nth match alone. Replaces the third foo. Returns Hey foo foo bar

The C<:nth> adverb has readable English-looking variants:

    say 'ooooo'.subst: 'o', 'x', :1st; # OUTPUT: «xoooo␤»
    say 'ooooo'.subst: 'o', 'x', :2nd; # OUTPUT: «oxooo␤»
    say 'ooooo'.subst: 'o', 'x', :3rd; # OUTPUT: «ooxoo␤»
    say 'ooooo'.subst: 'o', 'x', :4th; # OUTPUT: «oooxo␤»


=head2 method subst-mutate

B<NOTE:> I<<< C<.subst-mutate> will be deprecated in future language
versions. You can use L<subst> with
L«C<.=> method call assignment operator|/routine/.=.html» or
L«C<s///> substitution operator|/syntax/s$SOLIDUS$SOLIDUS$SOLIDUS» instead. >>>

Where L<subst> returns the modified string and leaves the original
unchanged, it is possible to mutate the original string by using
C<subst-mutate>. If the match is successful, the method returns a L<Match>
object representing the successful match, otherwise returns L<Nil>. If C<:nth>
(or one of its aliases) with L<Iterable> value, C<:g>, C<:global>, or C<:x>
arguments are used, returns a L<List> of L<Match> objects, or an empty L<List>
if no matches occurred.

    my $some-string = "Some foo";
    my $match = $some-string.subst-mutate(/foo/, "string");
    say $some-string;  # OUTPUT: «Some string␤»
    say $match;        # OUTPUT: «｢foo｣␤»
    $some-string.subst-mutate(/<[oe]>/, '', :g); # remove every o and e, notice the :g named argument from .subst

If a L<Regex> C<$matcher> is used, the
L«C<$/> special variable|/syntax/$$SOLIDUS» will be set to C<Nil> (if no
matches occurred), a L<Match> object, or a L<List> of L<Match> objects (if
multi-match options like C<:g> are used).

=head2 routine substr

    multi sub    substr(Str:D $s, $from, $chars?  --> Str:D)
    multi sub    substr(Str:D $s, Range  $from-to --> Str:D)
    multi method substr(Str:D $s: $from, $chars?  --> Str:D)
    multi method substr(Str:D $s: Range $from-to  --> Str:D)

Returns a substring of the original string, between the indices specified by
C<$from-to>'s endpoints (coerced to L<Int>) or from index C<$from> and of
length C<$chars>.

Both C<$from> and C<$chars> can be specified as L<Callable>, which will be
invoked with the L<length|/routine/chars> of the original string and the
returned value will be used as the value for the argument. If C<$from> or
C<$chars> are not L<Callable>, they'll be coerced to L<Int>.

If C<$chars> is omitted or is larger than the available characters,
the string from C<$from> until the end of the string is returned.
If C<$from-to>'s starting index or C<$from> is less than
zero, C<X::OutOfRange> exception is thrown. The C<$from-to>'s ending index is
permitted to extend past the end of string, in which case it will be equivalent
to the index of the last character.

    say substr("Long string", 3..6);     # RESULT: «g st␤»
    say substr("Long string", 6, 3);     # RESULT: «tri␤»
    say substr("Long string", 6);        # RESULT: «tring␤»
    say substr("Long string", 6, *-1);   # RESULT: «trin␤»
    say substr("Long string", *-3, *-1); # RESULT: «in␤»

=head2 method substr-eq

    multi method substr-eq(Str:D:  Str(Cool) $test-string, Int(Cool) $from --> Bool)
    multi method substr-eq(Cool:D: Str(Cool) $test-string, Int(Cool) $from --> Bool)

Returns C<True> if the C<$test-string> exactly matches the C<String> object,
starting from the given initial index C<$from>.  For example, beginning with
the string C<"foobar">, the substring C<"bar"> will match from index 3:

    my $string = "foobar";
    say $string.substr-eq("bar", 3);    # OUTPUT: «True␤»

However, the substring C<"barz"> starting from index 3 won't match even
though the first three letters of the substring do match:

    my $string = "foobar";
    say $string.substr-eq("barz", 3);   # OUTPUT: «False␤»

Naturally, to match the entire string, one merely matches from index 0:

    my $string = "foobar";
    say $string.substr-eq("foobar", 0); # OUTPUT: «True␤»

Since this method is inherited from the C<Cool> type, it also works on
integers.  Thus the integer C<42> will match the value C<342> starting from
index 1:

    my $integer = 342;
    say $integer.substr-eq(42, 1);      # OUTPUT: «True␤»

As expected, one can match the entire value by starting at index 0:

    my $integer = 342;
    say $integer.substr-eq(342, 0);     # OUTPUT: «True␤»

Also using a different value or an incorrect starting index won't match:

    my $integer = 342;
    say $integer.substr-eq(42, 3);      # OUTPUT: «False␤»
    say $integer.substr-eq(7342, 0);    # OUTPUT: «False␤»

=head2 method substr-rw

    method substr-rw($from, $length = *)

A version of C<substr> that returns a L<Proxy|/type/Proxy> functioning as a
writable reference to a part of a string variable. Its first argument, C<$from>
specifies the index in the string from which a substitution should occur, and
its last argument, C<$length> specifies how many characters are to be replaced.
If not specified, C<$length> defaults to the length of the string.

For example, in its method form, if one wants to take the string C<"abc">
and replace the second character (at index 1) with the letter C<"z">, then
one does this:

    my $string = "abc";
    $string.substr-rw(1, 1) = "z";
    $string.say;                         # OUTPUT: «azc␤»

Note that new characters can be inserted as well:

    my $string = 'azc';
    $string.substr-rw(2, 0) = "-Zorro-"; # insert new characters BEFORE the character at index 2
    $string.say;                         # OUTPUT: «az-Zorro-c␤»

C<substr-rw> also has a function form, so the above examples can also be
written like so:

    my $string = "abc";
    substr-rw($string, 1, 1) = "z";
    $string.say;                          # OUTPUT: «azc␤»
    substr-rw($string, 2, 0) = "-Zorro-";
    $string.say;                          # OUTPUT: «az-Zorro-c␤»

It is also possible to alias the writable reference returned by C<substr-rw>
for repeated operations:

    my $string = "A character in the 'Flintstones' is: barney";
    $string ~~ /(barney)/;
    my $ref := substr-rw($string, $0.from, $0.to-$0.from);
    $string.say;
    # OUTPUT: «A character in the 'Flintstones' is: barney␤»
    $ref = "fred";
    $string.say;
    # OUTPUT: «A character in the 'Flintstones' is: fred␤»
    $ref = "wilma";
    $string.say;
    # OUTPUT: «A character in the 'Flintstones' is: wilma␤»

=head2 routine samemark

    multi sub samemark(Str:D $string, Str:D $pattern --> Str:D)
    method    samemark(Str:D: Str:D $pattern --> Str:D)

Returns a copy of C<$string> with the mark/accent information for each
character changed such that it matches the mark/accent of the corresponding
character in C<$pattern>. If C<$string> is longer than C<$pattern>, the
remaining characters in C<$string> receive the same mark/accent as the last
character in C<$pattern>. If C<$pattern> is empty no changes will be made.

Examples:

    say 'åäö'.samemark('aäo');                        # OUTPUT: «aäo␤»
    say 'åäö'.samemark('a');                          # OUTPUT: «aao␤»

    say samemark('Pêrl', 'a');                        # OUTPUT: «Perl␤»
    say samemark('aöä', '');                          # OUTPUT: «aöä␤»

=head2 method succ

    method succ(Str:D --> Str:D)

Returns the string incremented by one.

String increment is "magical". It searches for the last alphanumeric
sequence that is not preceded by a dot, and increments it.

    '12.34'.succ;      # RESULT: «13.34»
    'img001.png'.succ; # RESULT: «img002.png»

The actual increment step works by mapping the last alphanumeric
character to a character range it belongs to, and choosing the next
character in that range, carrying to the previous letter on overflow.

    'aa'.succ;   # RESULT: «ab»
    'az'.succ;   # RESULT: «ba»
    '109'.succ;  # RESULT: «110»
    'α'.succ;    # RESULT: «β»
    'a9'.succ;   # RESULT: «b0»

String increment is Unicode-aware, and generally works for scripts where a
character can be uniquely classified as belonging to one range of characters.

=head2 method pred

    method pred(Str:D: --> Str:D)

Returns the string decremented by one.

String decrementing is "magical" just like string increment (see
L<succ>). It fails on underflow

=for code
'b0'.pred;           # RESULT: «a9»
'a0'.pred;           # Failure
'img002.png'.pred;   # RESULT: «img001.png»

=head2 routine ord

    multi sub    ord(Str:D  --> Int:D)
    multi method ord(Str:D: --> Int:D)

Returns the codepoint number of the base characters of the first grapheme
in the string.

Example:

    ord("A"); # 65
    "«".ord;  # 171

=head2 method ords

    multi method ords(Str:D: --> Positional)

Returns a list of Unicode codepoint numbers that describe the codepoints making up the string.

Example:

    "aå«".ords; # (97 229 171)

Strings are represented as graphemes. If a character in the string is represented by multiple
codepoints, then all of those codepoints will appear in the result of C<ords>. Therefore, the
number of elements in the result may not always be equal to L<chars>, but will be equal to
L<codes>; L<codes> computes the codepoints in a different way, so the result might be faster.

The codepoints returned will represent the string in L<NFC>. See the L<NFD>, L<NFKC>, and
L<NFKD> methods if other forms are required.

=head2 method trans

    multi method trans(Str:D: Pair:D \what, *%n --> Str)
    multi method trans(Str:D: *@changes, :complement(:$c), :squash(:$s), :delete(:$d) --> Str)

Replaces one or many characters with one or many characters. Ranges are
supported, both for keys and values. Regexes work as keys. In case a list of
keys and values is used, substrings can be replaced as well. When called with
C<:complement> anything but the matched value or range is replaced with a
single value. With C<:delete> the matched characters are without corresponding
replacement are removed. Combining C<:complement> and C<:delete> will remove
anything but the matched values, I<unless replacement characters have been
specified>, in which case, C<:delete> would be ignored. The adverb C<:squash>
will reduce repeated matched characters to a single character.

Example:

    my $str = 'say $x<b> && $y<a>';
    $str.=trans( '<' => '«' );
    $str.=trans( '<' => '«', '>' => '»' );

    $str.=trans( [ '<'   , '>'   , '&' ] =>
                 [ '&lt;', '&gt;', '&amp;' ]);

    $str.=trans( ['a'..'y'] => ['A'..'z'] );

    "abcdefghij".trans(/<[aeiou]> \w/ => '');                     # RESULT: «cdgh»

    "a123b123c".trans(['a'..'z'] => 'x', :complement);            # RESULT: «axxxbxxxc»
    "a123b123c".trans('23' => '', :delete);                       # RESULT: «a1b1c»
    "aaa1123bb123c".trans('a'..'z' => 'A'..'Z', :squash);         # RESULT: «A1123B123C»
    "aaa1123bb123c".trans('a'..'z' => 'x', :complement, :squash); # RESULT: «aaaxbbxc»

=head2 method indent

    multi method indent(Int $steps where { $_ == 0 } )
    multi method indent(Int $steps where { $_ > 0  } )
    multi method indent($steps where { .isa(Whatever) || .isa(Int) && $_ < 0 } )

Indents each line of the string by C<$steps>. If C<$steps> is negative,
it outdents instead. If C<$steps> is L<C<*>|*>, then the string is
outdented to the margin:

    "  indented by 2 spaces\n    indented even more".indent(*)
        eq "indented by 2 spaces\n  indented even more"

=head2 method trim

    method trim(Str:D: --> Str)

Remove leading and trailing whitespace. It can be used both as a method
on strings and as a function. When used as a method it will return
the trimmed string. In order to do in-place trimming, one needs to write
C<.=trim>


    my $line = '   hello world    ';
    say '<' ~ $line.trim ~ '>';        # OUTPUT: «<hello world>␤»
    say '<' ~ trim($line) ~ '>';       # OUTPUT: «<hello world>␤»
    $line.trim;
    say '<' ~ $line ~ '>';             # OUTPUT: «<   hello world    >␤»
    $line.=trim;
    say '<' ~ $line ~ '>';             # OUTPUT: «<hello world>␤»

See also L<trim-trailing> and L<trim-leading>

=head2 method trim-trailing

    method trim-trailing(Str:D: --> Str)

Removes the whitespace characters from the end of a string. See also L<trim>.

=head2 method trim-leading

    method trim-leading(Str:D: --> Str)

Removes the whitespace characters from the beginning of a string. See also L<trim>.

=head2 method NFC

    method NFC(Str:D: --> NFC:D)

Returns a codepoint string in L<NFC|/type/NFC> format (Unicode
Normalization Form C / Composed).

=head2 method NFD

    method NFD(Str:D: --> NFD:D)

Returns a codepoint string in L<NFD|/type/NFD> format (Unicode
Normalization Form D / Decomposed).

=head2 method NFKC

    method NFKC(Str:D: --> NFKC:D)

Returns a codepoint string in L<NFKC|/type/NFKC> format (Unicode Normalization
Form KC / Compatibility Composed).

=head2 method NFKD

    method NFKD(Str:D: --> NFKD:D)

Returns a codepoint string in L<NFKD|/type/NFKD> format (Unicode Normalization
Form KD / Compatibility Decomposed).

=head2 method ACCEPTS

    multi method ACCEPTS(Str:D: $other)

Returns C<True> if the string is L<the same as|eq> C<$other>.

=head2 method Capture

Defined as:

    method Capture()

Throws C<X::Cannot::Capture>.

=head2 routine val

    multi sub val(Str:D $MAYBEVAL, :$val-or-fail)

Given a C<Str> that may be parsable as a numeric value, it will
attempt to construct the appropriate L<allomorph|/language/glossary#Allomorph>,
returning one of L<IntStr|/type/IntStr>, L<NumStr|/type/NumStr>, L<RatStr|/type/RatStr>
or L<ComplexStr|/type/ComplexStr> or a plain C<Str> if a numeric value cannot
be parsed.  If the C<:val-or-fail> adverb is provided it will return an
L<X::Str::Numeric|/type/X::Str::Numeric> rather than the original string if it
cannot parse the string as a number.

    say val("42").^name;    # OUTPUT: «IntStr␤»
    say val("42e0").^name;  # OUTPUT: «NumStr␤»
    say val("42.0").^name;  # OUTPUT: «RatStr␤»
    say val("42+0i").^name; # OUTPUT: «ComplexStr␤»

=end pod

# vim: expandtab softtabstop=4 shiftwidth=4 ft=perl6