please help with configuration

[gregor3636]

how to change gpio4 to gpio5 in config
{"c":{"io":[[[0],6],[[4,5,12,13,14],7]],"pt":8,"w":10,"n ":"RGBW-CCT","b":[{"g":0,"t":5}]},"m":240,"a":[{"s":5,"t" :30,"g":[5],"b":[{"g":0}]}]}

[shadowgrapher]

As far as I can see there is only one mention of GPIO4 in second GPIO array and it's mode the same as GPIO5

{
  "c":{
    "io":[
      [
        [
          0   /*** First array with only GPIO0 ***/
        ],
        6   /*** MODE 6 (Input only with binary input (button/switch) support) ***/
      ],
      [
        [
          4,   /*** Second array with GPIO4, GPIO5, GPIO12, GPIO13, GPIO14 ***/
          5,
          12,
          13,
          14
        ],
        7  /*** MODE 7 [Software PWM, only output] for all GPIOs in second array ***/
      ]
    ],
    "pt":8,
    "w":10,
    "n ":"RGBW-CCT",
    "b":[
      {
        "g":0,
        "t":5
      }
    ]
  },
  "m":240,
  "a":[
    {
      "s":5,
      "t":30,
      "g":[
        5
      ],
      "b":[
        {
          "g":0
        }
      ]
    }
  ]
}

[shadowgrapher]

Yes, if you need GPIO3 acts like a button:

       [             
          0,         
          3,         
          10
        ],
        6            <----/ Mode 6 [Input only with binary input (button/switch) support]
      ]

[gregor3636]

{"c":{"io":[[[5,12,13],2],[[0,3,10],6]],"pt":8,"w":10,"n ":"Sonoff-Rolet","l":13,"b":[[10,5]]},"a":[{"t":45,"o":18,"c":14 ,"f":70,"0":{"r":[[12,1],[5]]},"1":{"r":[[12],[5,1]]} ,"2":{"r":[[12],[5]]},"3":{"r":[[12,0,0.2],[5]]},"4":{ "r":[[12],[5,0,0.2]]},"f3":[[0,0]],"f4":[[9,0]]}]}

ok??

[shadowgrapher]

...and state input f4 I think

{"c":{"io":[[[5,12,13],2],[[0,3,10],6]],"pt":8,"w":10,"n ":"Sonoff-Rolet","l":13,"b":[[10,5]]},"a":[{"t":45,"o":18,"c":14 ,"f":70,"0":{"r":[[12,1],[5]]},"1":{"r":[[12],[5,1]]} ,"2":{"r":[[12],[5]]},"3":{"r":[[12,0,0.2],[5]]},"4":{ "r":[[12],[5,0,0.2]]},"f3":[[0,0]],"f4":[[3,0]]}]}

[gregor3636]

Thank you very much for your help, everything works, best regards

[shadowgrapher]

Glad I was able to help :)