strmv.f

*> \brief \b STRMV
*
*  =========== DOCUMENTATION ===========
*
* Online html documentation available at 
*            http://www.netlib.org/lapack/explore-html/ 
*
*  Definition:
*  ===========
*
*       SUBROUTINE STRMV(UPLO,TRANS,DIAG,N,A,LDA,X,INCX)
* 
*       .. Scalar Arguments ..
*       INTEGER INCX,LDA,N
*       CHARACTER DIAG,TRANS,UPLO
*       ..
*       .. Array Arguments ..
*       REAL A(LDA,*),X(*)
*       ..
*  
*
*> \par Purpose:
*  =============
*>
*> \verbatim
*>
*> STRMV  performs one of the matrix-vector operations
*>
*>    x := A*x,   or   x := A**T*x,
*>
*> where x is an n element vector and  A is an n by n unit, or non-unit,
*> upper or lower triangular matrix.
*> \endverbatim
*
*  Arguments:
*  ==========
*
*> \param[in] UPLO
*> \verbatim
*>          UPLO is CHARACTER*1
*>           On entry, UPLO specifies whether the matrix is an upper or
*>           lower triangular matrix as follows:
*>
*>              UPLO = 'U' or 'u'   A is an upper triangular matrix.
*>
*>              UPLO = 'L' or 'l'   A is a lower triangular matrix.
*> \endverbatim
*>
*> \param[in] TRANS
*> \verbatim
*>          TRANS is CHARACTER*1
*>           On entry, TRANS specifies the operation to be performed as
*>           follows:
*>
*>              TRANS = 'N' or 'n'   x := A*x.
*>
*>              TRANS = 'T' or 't'   x := A**T*x.
*>
*>              TRANS = 'C' or 'c'   x := A**T*x.
*> \endverbatim
*>
*> \param[in] DIAG
*> \verbatim
*>          DIAG is CHARACTER*1
*>           On entry, DIAG specifies whether or not A is unit
*>           triangular as follows:
*>
*>              DIAG = 'U' or 'u'   A is assumed to be unit triangular.
*>
*>              DIAG = 'N' or 'n'   A is not assumed to be unit
*>                                  triangular.
*> \endverbatim
*>
*> \param[in] N
*> \verbatim
*>          N is INTEGER
*>           On entry, N specifies the order of the matrix A.
*>           N must be at least zero.
*> \endverbatim
*>
*> \param[in] A
*> \verbatim
*>          A is REAL array of DIMENSION ( LDA, n ).
*>           Before entry with  UPLO = 'U' or 'u', the leading n by n
*>           upper triangular part of the array A must contain the upper
*>           triangular matrix and the strictly lower triangular part of
*>           A is not referenced.
*>           Before entry with UPLO = 'L' or 'l', the leading n by n
*>           lower triangular part of the array A must contain the lower
*>           triangular matrix and the strictly upper triangular part of
*>           A is not referenced.
*>           Note that when  DIAG = 'U' or 'u', the diagonal elements of
*>           A are not referenced either, but are assumed to be unity.
*> \endverbatim
*>
*> \param[in] LDA
*> \verbatim
*>          LDA is INTEGER
*>           On entry, LDA specifies the first dimension of A as declared
*>           in the calling (sub) program. LDA must be at least
*>           max( 1, n ).
*> \endverbatim
*>
*> \param[in,out] X
*> \verbatim
*>          X is REAL array of dimension at least
*>           ( 1 + ( n - 1 )*abs( INCX ) ).
*>           Before entry, the incremented array X must contain the n
*>           element vector x. On exit, X is overwritten with the
*>           transformed vector x.
*> \endverbatim
*>
*> \param[in] INCX
*> \verbatim
*>          INCX is INTEGER
*>           On entry, INCX specifies the increment for the elements of
*>           X. INCX must not be zero.
*> \endverbatim
*
*  Authors:
*  ========
*
*> \author Univ. of Tennessee 
*> \author Univ. of California Berkeley 
*> \author Univ. of Colorado Denver 
*> \author NAG Ltd. 
*
*> \date November 2011
*
*> \ingroup single_blas_level2
*
*> \par Further Details:
*  =====================
*>
*> \verbatim
*>
*>  Level 2 Blas routine.
*>  The vector and matrix arguments are not referenced when N = 0, or M = 0
*>
*>  -- Written on 22-October-1986.
*>     Jack Dongarra, Argonne National Lab.
*>     Jeremy Du Croz, Nag Central Office.
*>     Sven Hammarling, Nag Central Office.
*>     Richard Hanson, Sandia National Labs.
*> \endverbatim
*>
*  =====================================================================
      SUBROUTINE STRMV(UPLO,TRANS,DIAG,N,A,LDA,X,INCX)
*
*  -- Reference BLAS level2 routine (version 3.4.0) --
*  -- Reference BLAS is a software package provided by Univ. of Tennessee,    --
*  -- Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd..--
*     November 2011
*
*     .. Scalar Arguments ..
      INTEGER INCX,LDA,N
      CHARACTER DIAG,TRANS,UPLO
*     ..
*     .. Array Arguments ..
      REAL A(LDA,*),X(*)
*     ..
*
*  =====================================================================
*
*     .. Parameters ..
      REAL ZERO
      PARAMETER (ZERO=0.0E+0)
*     ..
*     .. Local Scalars ..
      REAL TEMP
      INTEGER I,INFO,IX,J,JX,KX
      LOGICAL NOUNIT
*     ..
*     .. External Functions ..
      LOGICAL LSAME
      EXTERNAL LSAME
*     ..
*     .. External Subroutines ..
      EXTERNAL XERBLA
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC MAX
*     ..
*
*     Test the input parameters.
*
      INFO = 0
      IF (.NOT.LSAME(UPLO,'U') .AND. .NOT.LSAME(UPLO,'L')) THEN
          INFO = 1
      ELSE IF (.NOT.LSAME(TRANS,'N') .AND. .NOT.LSAME(TRANS,'T') .AND.
     +         .NOT.LSAME(TRANS,'C')) THEN
          INFO = 2
      ELSE IF (.NOT.LSAME(DIAG,'U') .AND. .NOT.LSAME(DIAG,'N')) THEN
          INFO = 3
      ELSE IF (N.LT.0) THEN
          INFO = 4
      ELSE IF (LDA.LT.MAX(1,N)) THEN
          INFO = 6
      ELSE IF (INCX.EQ.0) THEN
          INFO = 8
      END IF
      IF (INFO.NE.0) THEN
          CALL XERBLA('STRMV ',INFO)
          RETURN
      END IF
*
*     Quick return if possible.
*
      IF (N.EQ.0) RETURN
*
      NOUNIT = LSAME(DIAG,'N')
*
*     Set up the start point in X if the increment is not unity. This
*     will be  ( N - 1 )*INCX  too small for descending loops.
*
      IF (INCX.LE.0) THEN
          KX = 1 - (N-1)*INCX
      ELSE IF (INCX.NE.1) THEN
          KX = 1
      END IF
*
*     Start the operations. In this version the elements of A are
*     accessed sequentially with one pass through A.
*
      IF (LSAME(TRANS,'N')) THEN
*
*        Form  x := A*x.
*
          IF (LSAME(UPLO,'U')) THEN
              IF (INCX.EQ.1) THEN
                  DO 20 J = 1,N
                      IF (X(J).NE.ZERO) THEN
                          TEMP = X(J)
                          DO 10 I = 1,J - 1
                              X(I) = X(I) + TEMP*A(I,J)
   10                     CONTINUE
                          IF (NOUNIT) X(J) = X(J)*A(J,J)
                      END IF
   20             CONTINUE
              ELSE
                  JX = KX
                  DO 40 J = 1,N
                      IF (X(JX).NE.ZERO) THEN
                          TEMP = X(JX)
                          IX = KX
                          DO 30 I = 1,J - 1
                              X(IX) = X(IX) + TEMP*A(I,J)
                              IX = IX + INCX
   30                     CONTINUE
                          IF (NOUNIT) X(JX) = X(JX)*A(J,J)
                      END IF
                      JX = JX + INCX
   40             CONTINUE
              END IF
          ELSE
              IF (INCX.EQ.1) THEN
                  DO 60 J = N,1,-1
                      IF (X(J).NE.ZERO) THEN
                          TEMP = X(J)
                          DO 50 I = N,J + 1,-1
                              X(I) = X(I) + TEMP*A(I,J)
   50                     CONTINUE
                          IF (NOUNIT) X(J) = X(J)*A(J,J)
                      END IF
   60             CONTINUE
              ELSE
                  KX = KX + (N-1)*INCX
                  JX = KX
                  DO 80 J = N,1,-1
                      IF (X(JX).NE.ZERO) THEN
                          TEMP = X(JX)
                          IX = KX
                          DO 70 I = N,J + 1,-1
                              X(IX) = X(IX) + TEMP*A(I,J)
                              IX = IX - INCX
   70                     CONTINUE
                          IF (NOUNIT) X(JX) = X(JX)*A(J,J)
                      END IF
                      JX = JX - INCX
   80             CONTINUE
              END IF
          END IF
      ELSE
*
*        Form  x := A**T*x.
*
          IF (LSAME(UPLO,'U')) THEN
              IF (INCX.EQ.1) THEN
                  DO 100 J = N,1,-1
                      TEMP = X(J)
                      IF (NOUNIT) TEMP = TEMP*A(J,J)
                      DO 90 I = J - 1,1,-1
                          TEMP = TEMP + A(I,J)*X(I)
   90                 CONTINUE
                      X(J) = TEMP
  100             CONTINUE
              ELSE
                  JX = KX + (N-1)*INCX
                  DO 120 J = N,1,-1
                      TEMP = X(JX)
                      IX = JX
                      IF (NOUNIT) TEMP = TEMP*A(J,J)
                      DO 110 I = J - 1,1,-1
                          IX = IX - INCX
                          TEMP = TEMP + A(I,J)*X(IX)
  110                 CONTINUE
                      X(JX) = TEMP
                      JX = JX - INCX
  120             CONTINUE
              END IF
          ELSE
              IF (INCX.EQ.1) THEN
                  DO 140 J = 1,N
                      TEMP = X(J)
                      IF (NOUNIT) TEMP = TEMP*A(J,J)
                      DO 130 I = J + 1,N
                          TEMP = TEMP + A(I,J)*X(I)
  130                 CONTINUE
                      X(J) = TEMP
  140             CONTINUE
              ELSE
                  JX = KX
                  DO 160 J = 1,N
                      TEMP = X(JX)
                      IX = JX
                      IF (NOUNIT) TEMP = TEMP*A(J,J)
                      DO 150 I = J + 1,N
                          IX = IX + INCX
                          TEMP = TEMP + A(I,J)*X(IX)
  150                 CONTINUE
                      X(JX) = TEMP
                      JX = JX + INCX
  160             CONTINUE
              END IF
          END IF
      END IF
*
      RETURN
*
*     End of STRMV .
*
      END