packages.sh

#!/usr/bin/env bash

# This file is part of The RetroPie Project
#
# The RetroPie Project is the legal property of its developers, whose names are
# too numerous to list here. Please refer to the COPYRIGHT.md file distributed with this source.
#
# See the LICENSE.md file at the top-level directory of this distribution and
# at https://raw.githubusercontent.com/RetroPie/RetroPie-Setup/master/LICENSE.md
#

declare -A __sections=(
    [core]="core"
    [main]="main"
    [opt]="optional"
    [exp]="experimental"
    [driver]="driver"
    [config]="configuration"
    [depends]="dependency"
)

__NET_ERRMSG=""

function rp_listFunctions() {
    local id
    local desc
    local mode
    local func
    local enabled

    echo -e "ID:                 Description:                                 List of available functions"
    echo "-----------------------------------------------------------------------------------------------------------------------------------"
    for id in ${__mod_id[@]}; do
        if rp_isEnabled "$id"; then
            printf "%-20s: %-42s :" "$id" "${__mod_info[$id/desc]}"
        else
            printf "*%-20s: %-42s : %s\n" "$id" "${__mod_info[$id/desc]}" "This module is not available for your platform"
            continue
        fi
        while read mode; do
            # skip private module functions (start with an underscore)
            [[ "$mode" = _* ]] && continue
            mode=${mode//_$id/}
            echo -n " $mode"
        done < <(compgen -A function -X \!*_$id)
        fnExists "sources_${id}" && echo -n " clean"
        fnExists "install_${id}" || fnExists "install_bin_${id}" && ! fnExists "remove_${id}" && echo -n " remove"
        echo ""
    done
    echo "==================================================================================================================================="
}

function rp_printUsageinfo() {
    echo -e "Usage:\n$0 <ID>\nThis will run the functions depends, sources, build, install, configure and clean automatically.\n"
    echo -e "Alternatively, $0 can be called as\n$0 <ID> [function] where function is a supported module functions as listed below\n"
    echo    "Details of some common functions:"
    echo    "depends:    install the dependencies for the module."
    echo    "sources:    install the sources for the module"
    echo    "build:      build/compile the module"
    echo    "install:    install the compiled module"
    echo    "configure:  configure the installed module (es_systems.cfg / launch parameters etc)"
    echo    "clean:      remove the sources/build folder for the module"
    echo    "remove:     remove/uninstall the module"
    echo    "help:       get additional help on the module (available for all modules)"
    echo -e "\nThis is a list of valid modules/packages and supported functions:\n"
    rp_listFunctions
}

function rp_moduleVars() {
    local id="$1"

    # create variables that can be used in modules
    local code
    read -d "" -r code <<_EOF_
        local md_desc="${__mod_info[$id/desc]}"
        local md_help="${__mod_info[$id/help]}"
        local md_type="${__mod_info[$id/type]}"
        local md_flags="${__mod_info[$id/flags]}"
        local md_path="${__mod_info[$id/path]}"

        local md_licence="${__mod_info[$id/licence]}"

        local md_repo_type="${__mod_info[$id/repo_type]}"
        local md_repo_url="${__mod_info[$id/repo_url]}"
        local md_repo_branch="${__mod_info[$id/repo_branch]}"
        local md_repo_commit="${__mod_info[$id/repo_commit]}"

        local md_build="$__builddir/$id"
        local md_inst="$(rp_getInstallPath $id)"
        # get module path folder + md_id for $md_data
        local md_data="${__mod_info[$id/path]%/*}/$id"
_EOF_

    echo "$code"
}

function rp_callModule() {
    local md_id="$1"
    local mode="$2"
    # shift the function parameters left so $@ will contain any additional parameters which we can use in modules
    shift 2

    # check if module exists
    if ! rp_hasModule "$md_id"; then
        printMsgs "console" "No module '$md_id' found."
        return 2
    fi

    # check if module is enabled for platform
    if ! rp_isEnabled "$md_id"; then
        printMsgs "console" "Module '$md_id' is not available for your system ($__platform)"
        return 3
    fi

    # parameters _auto_ _binary or _source_ (_source_ is used if no parameters are given for a module)
    case "$mode" in
        # install the module if not installed, and update if it is
        _autoupdate_)
            if rp_isInstalled "$md_id"; then
                rp_callModule "$md_id" "_update_" || return 1
            else
                rp_callModule "$md_id" "_auto_" || return 1
            fi
            return 0
            ;;
        # automatic modes used by rp_installModule to choose between binary/source based on pkg info
        _auto_|_update_)
            # if updating and a package isn't installed, return an error
            if [[ "$mode" == "_update_" ]] && ! rp_isInstalled "$md_id"; then
                __ERRMSGS+=("$md_id is not installed, so can't update")
                return 1
            fi

            rp_loadPackageInfo "$md_id" "pkg_origin"
            local pkg_origin="${__mod_info[$md_id/pkg_origin]}"

            local has_binary=0
            local has_net=0

            isConnected && has_net=1

            # for modules with nonet flag that don't need to download data, we force has_net to 1
            hasFlag "${__mod_info[$id/flags]}" "nonet" && has_net=1

            if [[ "$has_net" -eq 1 ]]; then
                rp_hasBinary "$md_id"
                local ret="$?"
                [[ "$ret" -eq 0 ]] && has_binary=1
                [[ "$ret" -eq 2 ]] && has_net=0
            fi

            # fail if we don't seem to be connected
            if [[ "$has_net" -eq 0 ]]; then
                __ERRMSGS+=("Can't install/update $md_id - $__NET_ERRMSG")
                return 1
            fi

            local do_update=0

            # if we are in _update_ mode we only update if there is a newer version of the binary or source
            if [[ "$mode" == "_update_" ]]; then
                printMsgs "heading" "Checking for updates for $md_id"
                rp_hasNewerModule "$md_id" "$pkg_origin"
                [[ "$?" -eq 0 || "$?" == 2 ]] && do_update=1
                # if rp_hasNewerModule returns 3, then there was an error and we should abort
                [[ "$?" -eq 3 ]] && return 1
            else
                do_update=1
            fi

            if [[ "$do_update" -eq 1 ]]; then
                printMsgs "console" "Update is available - updating ..."
            else
                printMsgs "console" "No update was found."
            fi

            if [[ "$do_update" -eq 1 ]]; then
                if [[ "$pkg_origin" != "source" && "$has_binary" -eq 1 ]]; then
                    rp_callModule "$md_id" _binary_ || return 1
                else
                    rp_callModule "$md_id" _source_ || return 1
                fi
            fi
            return 0
            ;;
        _binary_)
            for mode in depends install_bin configure; do
                rp_callModule "$md_id" "$mode" || return 1
            done
            return 0
            ;;
        # automatically build/install module from source if no _source_ or no parameters are given
        ""|_source_)
            for mode in depends sources build install configure clean; do
                rp_callModule "$md_id" "$mode" || return 1
            done
            return 0
            ;;
    esac

    # load our md_* variables
    eval "$(rp_moduleVars $md_id)"

    local md_mode="install"

    # set md_conf_root to $configdir and to $configdir/ports for ports
    # ports in libretrocores or systems (as ES sees them) in ports will need to change it manually with setConfigRoot
    local md_conf_root
    if [[ "$md_type" == "ports" ]]; then
        setConfigRoot "ports"
    else
        setConfigRoot ""
    fi

    case "$mode" in
        # remove sources
        clean)
            if [[ "$__persistent_repos" -eq 1 ]]; then
                if [[ -d "$md_build/.git" ]]; then
                    git -C "$md_build" reset --hard
                    git -C "$md_build" clean -f -d
                fi
            else
                rmDirExists "$md_build"
            fi
            return 0
            ;;
        # create binary archive
        create_bin)
            rp_createBin || return 1
            return 0
            ;;
        # echo module help to console
        help)
            printMsgs "console" "$md_desc\n\n$md_help"
            return 0;
            ;;
    esac

    # create function name
    function="${mode}_${md_id}"

    # automatically switch to install_bin if present while install is not, and handle cases where we have
    # fallback functions when not present in modules - currently install_bin and remove
    if ! fnExists "$function"; then
        if [[ "$mode" == "install" ]] && fnExists "install_bin_${md_id}"; then
            function="install_bin_${md_id}"
            mode="install_bin"
        elif [[ "$mode" != "install_bin" && "$mode" != "remove" ]]; then
            return 0
        fi
    fi

    # these can be returned by a module
    local md_ret_require=()
    local md_ret_files=()
    local md_ret_errors=()
    local md_ret_info=()

    local action
    local pushed=1
    case "$mode" in
        depends)
            if [[ "$1" == "remove" ]]; then
                md_mode="remove"
                action="Removing"
            else
                action="Installing"
            fi
            action+=" dependencies for"
            ;;
        sources)
            action="Getting sources for"
            mkdir -p "$md_build"
            pushd "$md_build"
            pushed=$?
            ;;
        build)
            action="Building"
            pushd "$md_build" 2>/dev/null
            pushed=$?
            ;;
        install)
            pushd "$md_build" 2>/dev/null
            pushed=$?
            ;;
        install_bin)
            action="Installing (binary)"
            ;;
        configure)
            action="Configuring"
            pushd "$md_inst" 2>/dev/null
            pushed=$?
            ;;
        remove)
            action="Removing"
            ;;
        _update_hook)
            ;;
        *)
            action="Running action '$mode' for"
            ;;
    esac

    # print an action and a description
    if [[ -n "$action" ]]; then
        printHeading "$action '$md_id' : $md_desc"
    fi

    case "$mode" in
        remove)
            fnExists "$function" && "$function" "$@"
            md_mode="remove"
            if fnExists "configure_${md_id}"; then
                pushd "$md_inst" 2>/dev/null
                pushed=$?
                "configure_${md_id}"
            fi
            rm -rf "$md_inst"
            rp_clearCachedInfo "$md_id"
            printMsgs "console" "Removed directory $md_inst"
            ;;
        install)
            action="Installing"
            # remove any previous install folder unless noinstclean flag is set
            if ! hasFlag "${__mod_info[$md_id/flags]}" "noinstclean"; then
                rmDirExists "$md_inst"
            fi
            mkdir -p "$md_inst"
            "$function" "$@"
            ;;
        install_bin)
            if fnExists "install_bin_${md_id}"; then
                mkdir -p "$md_inst"
                if ! "$function" "$@"; then
                    md_ret_errors+=("Unable to install binary for $md_id")
                fi
            else
                if rp_hasBinary "$md_id"; then
                    rp_installBin
                else
                    md_ret_errors+=("Could not find a binary for $md_id")
                fi
            fi
            ;;
        *)
            # call the function with parameters
            "$function" "$@"
            ;;
    esac

    # check if any required files are found
    if [[ -n "$md_ret_require" ]]; then
        for file in "${md_ret_require[@]}"; do
            if [[ ! -e "$file" ]]; then
                md_ret_errors+=("Could not successfully $mode $md_id - $md_desc ($file not found).")
                break
            fi
        done
    fi

    if [[ "${#md_ret_errors}" -eq 0 && -n "$md_ret_files" ]]; then
        # check for existence and copy any files/directories returned
        local file
        for file in "${md_ret_files[@]}"; do
            if [[ ! -e "$md_build/$file" ]]; then
                md_ret_errors+=("Could not successfully install $md_desc ($md_build/$file not found).")
                break
            fi
            cp -Rvf "$md_build/$file" "$md_inst"
        done
    fi

    # remove build folder if empty
    [[ -d "$md_build" ]] && find "$md_build" -maxdepth 0 -empty -exec rmdir {} \;

    local ret=0
    # some errors were returned.
    if [[ "${#md_ret_errors[@]}" -gt 0 ]]; then
        __ERRMSGS+=("${md_ret_errors[@]}")
        printMsgs "console" "${md_ret_errors[@]}" >&2
        # if sources fails and we were called from the setup gui module clean sources
        if [[ "$mode" == "sources" && "$__setup" -eq 1 ]]; then
            rp_callModule "$md_id" clean
        fi
        # remove install folder if there is an error (and it is empty)
        [[ -d "$md_inst" ]] && find "$md_inst" -maxdepth 0 -empty -exec rmdir {} \;
        ret=1
    else
        [[ "$mode" == "install_bin" ]] && rp_setPackageInfo "$md_id" "binary"
        [[ "$mode" == "install" ]] && rp_setPackageInfo "$md_id" "source"
        # handle the case of a few drivers that don't have an install function and set the package info at build stage
        if ! fnExists "install_${md_id}" && [[ "$mode" == "build" ]]; then
            rp_setPackageInfo "$md_id" "source"
        fi
    fi

    # some information messages were returned
    if [[ "${#md_ret_info[@]}" -gt 0 ]]; then
        __INFMSGS+=("${md_ret_info[@]}")
    fi

    [[ "$pushed" -eq 0 ]] && popd

    return "$ret"
}

function rp_hasBinaries() {
    [[ "$__has_binaries" -eq 1 ]] && return 0
    return 1
}

function rp_getBinaryUrl() {
    local id="$1"
    local url=""
    rp_hasBinaries && url="$__binary_url/${__mod_info[$id/type]}/$id.tar.gz"
    if fnExists "install_bin_${id}"; then
        if fnExists "__binary_url_${id}"; then
            url="$(__binary_url_${id})"
        else
            url="notest"
        fi
    fi
    echo "$url"
}

# returns 0 if file exists, 1 if it doesn't and 2 on other error
function rp_remoteFileExists() {
    local url="$1"
    local ret
    # runCurl will cause stderr to be copied to output so we redirect both stdout/stderr to /dev/null.
    # any errors will have been captured by runCurl
    runCurl --location --max-time 10 --silent --show-error --fail --head "$url" &>/dev/null
    ret="$?"
    if [[ "$ret" -eq 0 ]]; then
        return 0
    elif [[ "$ret" -eq 22 ]]; then
        return 1
    else
        return 2
    fi
}

function rp_hasBinary() {
    local id="$1"

    # binary blacklist for armv7 Debian/OSMC due to GCC ABI incompatibility with
    # threaded C++ apps on Raspbian (armv6 userland)
    if [[ "$__os_id" != "Raspbian" ]] && ! isPlatform "armv6"; then
        case "$id" in
            emulationstation|lzdoom|lr-dinothawr|lr-ppsspp|ppsspp)
                return 1
                ;;
        esac
    fi

    local url="$(rp_getBinaryUrl $id)"
    [[ "$url" == "notest" ]] && return 0
    [[ -z "$url" ]] && return 1

    [[ -n "${__mod_info[$id/has_binary]}" ]] && return "${__mod_info[$id/has_binary]}"

    local ret=1
    rp_remoteFileExists "$url"
    ret="$?"

    # if there wasn't an error, cache the result
    [[ "$ret" -ne 2 ]] && __mod_info[$id/has_binary]="$ret"
    return "$ret"
}

function rp_getFileDate() {
    local url="$1"
    [[ -z "$url" ]] && return 1

    # get last-modified date stripping any CR in the output
    local file_date=$(runCurl --location --silent --fail --head --no-styled-output "$url" | tr -d "\r" | grep -ioP "last-modified: \K.+")
    # if there is a date set in last-modified header, then convert to iso-8601 format
    if [[ -n "$file_date" ]]; then
        file_date="$(date -Iseconds --date="$file_date")"
        echo "$file_date"
        return 0
    fi
    return 1
}

function rp_getBinaryDate() {
    local id="$1"
    local url="$(rp_getBinaryUrl $id)"
    [[ -z "$url" || "$url" == "notest" ]] && return 1
    local bin_date
    if bin_date="$(rp_getFileDate "$url")"; then
        echo "$bin_date"
        return 0
    fi
    return 1
}

function rp_dateIsNewer() {
    local date_a="$1"
    local date_b="$2"
    [[ -z "$date_a" || -z "$date_b" ]] && return 0
    if date_a="$(date -d "$date_a" +%s 2>/dev/null)" && date_b="$(date -d "$date_b" +%s 2>/dev/null)"; then
        [[ "$date_b" -gt "$date_a" ]] && return 0
    else
        return 0
    fi
    return 1
}

# resolve repository parameters - any parameters with a : will get the data from the following function name
function rp_resolveRepoParam() {
    local param="$1"
    if [[ "$param" == :* ]]; then
        param="${param:1}"
        if fnExists "$param"; then
            echo "$($param)"
            return
        fi
    fi
    echo "$param"
}

# gets remote repository hash/revision - echos hash of remote repo and returns 0, or
# echos an error and returns 1 on failure
function rp_getRemoteRepoHash() {
    local type="$1"
    local url="$2"
    local branch="$3"
    local commit="$4"
    local hash
    local ret
    local cmd=()
    set -o pipefail
    case "$type" in
        git)
            # when the remote repository uses an annotated git tag, the real commit is found by looking for the
            # "tag^{}" reference, since the tag ref will point to the tag object itself, instead of the tagged
            # commit. See gitrevisions(7).
            cmd=(git ls-remote "$url" "$branch" "$branch^{}")
            # grep to make sure we only return refs/heads/BRANCH and refs/tags/BRANCH in case there are additional
            # references to the branch/tag eg refs/heads/SOMETHINGELSE/master which can be the case.
            # we grab the last match reported by grep, as tags that also have a tag^{} reference
            # will be displayed after.
            hash=$("${cmd[@]}" 2>/dev/null | grep -P "\trefs/(heads|tags)/$branch" | tail -n1 | cut -f1)
            ;;
        svn)
            cmd=(svn info -r"$commit" "$url")
            hash=$("${cmd[@]}" 2>/dev/null | grep -oP "Last Changed Rev: \K.*")
            ;;
    esac
    ret="$?"
    set +o pipefail
    if [[ "$ret" -ne 0 ]]; then
        echo "${cmd[*]} failed with return code $ret - please check your network connection"
        return 1
    fi
    echo "$hash"
    return 0
}

# returns 0 if a module has a newer version, 1 if it doesn't, 2 if unknown (always update), or 3 if there is an error
function rp_hasNewerModule() {
    local id="$1"
    local type="$2"

    [[ -n "${__mod_info[$id/has_newer]}" ]] && return "${__mod_info[$id/has_newer]}"

    rp_loadPackageInfo "$id"
    local pkg_origin="${__mod_info[$id/pkg_origin]}"
    local pkg_date="${__mod_info[$id/pkg_date]}"
    local pkg_repo_date="${__mod_info[$id/pkg_repo_date]}"
    local pkg_repo_commit="${__mod_info[$id/pkg_repo_commit]}"

    local ret=1
    case "$type" in
        binary)
            ret=""
            if [[ -n "$pkg_date" ]]; then
                local bin_date="$(rp_getBinaryDate $id)"
                if [[ -n "$bin_date" ]]; then
                    rp_dateIsNewer "$pkg_date" "$bin_date"
                    ret="$?"
                fi
            fi
            [[ -z "$ret" ]] && ret=2
            ;;
        source)
            local repo_type="${__mod_info[$id/repo_type]}"
            local repo_url="$(rp_resolveRepoParam "${__mod_info[$id/repo_url]}")"
            case "$repo_type" in
                file)
                    if [[ -n "$pkg_repo_date" ]]; then
                        local file_date="$(rp_getFileDate "$repo_url")"
                        rp_dateIsNewer "$pkg_repo_date" "$file_date"
                        ret="$?"
                    fi
                    ;;
                git|svn)
                    local repo_branch="$(rp_resolveRepoParam "${__mod_info[$id/repo_branch]}")"
                    local repo_commit="$(rp_resolveRepoParam "${__mod_info[$id/repo_commit]}")"
                    # if we are locked to a single commit, then we compare against the current module commit only
                    if [[ -n "$repo_commit" && "$repo_commit" != "HEAD" ]]; then
                        # if we are using git and the module has a commit hash, then adjust
                        # the package commit length for the comparison
                        if [[ "$repo_type" == "git" && "${#repo_commit}" -ge 4 ]]; then
                            pkg_repo_commit="${pkg_repo_commit::${#repo_commit}}"
                        fi
                        if [[ "$pkg_repo_commit" != "$repo_commit" ]]; then
                            ret=0
                        fi
                    else
                        local remote_commit
                        if remote_commit="$(rp_getRemoteRepoHash "$repo_type" "$repo_url" "$repo_branch" "$repo_commit")"; then
                            if [[ -n "$remote_commit" && "$pkg_repo_commit" != "$remote_commit" ]]; then
                                ret=0
                            fi
                        else
                            __ERRMSGS+=("$remote_commit")
                            ret=3
                        fi
                    fi
                    ;;
                :*)
                    local pkg_repo_extra="${__mod_info[$id/pkg_repo_extra]}"
                    # handle checking via module function - function should return 0 if there is a newer version
                    local function="${repo_type:1}"
                    if fnExists "$function"; then
                        "$function" newer
                        ret="$?"
                    fi
                    ;;
                *)
                    # fallback on forcing an update
                    ret=2
                    ;;
            esac

            # if we are currently not going to update - check the last commit date of the module code
            # if it's newer than the install date of the module we force an update, in case patches or build
            # related options have been changed
            if [[ "$ret" -eq 1 && "$__ignore_module_date" -ne 1 ]]; then
                local vendor="${__mod_info[$id/vendor]}"
                local repo_dir="$scriptdir"
                [[ "$vendor" != "RetroPie" ]] && repo_dir+="/ext/$vendor"
                local module_date="$(sudo -u "$user" git -C "$repo_dir" log -1 --format=%cI -- "${__mod_info[$id/path]}")"
                # just in case the module is not known to git, get the file last modified date
                [[ -z "$module_date" ]] && module_date="$(date -Iseconds -r "${__mod_info[$id/path]}")"
                if rp_dateIsNewer "$pkg_date" "$module_date"; then
                    ret=0
                fi
            fi
            ;;
        *)
            # for unknown or in the case of a blank pkg_origin assume there is an update
            ret=2
            ;;
    esac

    # cache our return value
    __mod_info[$id/has_newer]="$ret"

    return "$ret"
}

function rp_getInstallPath() {
    local id="$1"
    echo "$rootdir/${__mod_info[$id/type]}/$id"
}

function rp_installBin() {
    rp_hasBinaries || fatalError "There are no binary archives for platform $__platform"
    local archive="$md_id.tar.gz";
    local dest="$rootdir/$md_type"

    local cmd_out

    # create temporary folder
    local tmp=$(mktemp -d)

    if downloadAndVerify "$__binary_url/$md_type/$archive" "$tmp/$archive"; then
        mkdir -p "$dest"
        rm -rf "$dest/$md_id"
        if tar -xvf "$tmp/$archive" -C "$dest"; then
            rm -rf "$tmp"
            return 0
        else
            md_ret_errors+=("Archive $archive failed to unpack correctly to $dest")
        fi
    fi

    rm -rf "$tmp"
    return 1
}

function rp_createBin() {
    printHeading "Creating binary archive for $md_desc"

    if [[ ! -d "$md_inst" ]]; then
        printMsgs "console" "No install directory $md_inst - no archive created"
        return 1
    fi

    if dirIsEmpty "$md_inst"; then
        printMsgs "console" "Empty install directory $md_inst - no archive created"
        return 1
    fi

    local archive="$md_id.tar.gz"
    local dest="$__tmpdir/archives/$__binary_path/$md_type"
    mkdir -p "$dest"
    rm -f "$dest/$archive" "$dest/$archive.asc"
    local ret=1
    if tar cvzf "$dest/$archive" -C "$rootdir/$md_type" "$md_id"; then
        if [[ -n "$__gpg_signing_key" ]]; then
            if signFile "$dest/$archive"; then
                chown $user:$user "$dest/$archive" "$dest/$archive.asc"
                ret=0
            fi
        else
            ret=0
        fi
    fi
    if [[ "$ret" -eq 0 ]]; then
        cp "$md_inst/retropie.pkg" "$dest/$md_id.pkg"
    else
        rm -f "$dest/$archive"
    fi
    return "$ret"
}

function rp_hasModule() {
    local id="$1"
    [[ -n "${__mod_idx[$id]}" ]] && return 0
    return 1
}

function rp_installModule() {
    local id="$1"
    local mode="$2"
    [[ -z "$mode" ]] && mode="_auto_"
    rp_callModule "$id" "$mode" || return 1
    return 0
}

function rp_clearCachedInfo() {
    local id="$1"
    # clear cached data
    # set pkg_info to 0 to force a reload when needed
    __mod_info[$id/pkg_info]=0
    __mod_info[$id/has_binary]=""
    __mod_info[$id/has_newer]=""
}

# this is run after the install_ID function for a module - which by default would be from the
# folder set by md_build. However some modules install directly to md_inst which would mean unless
# they change directory also to md_inst in the install stage (which is common), it's possible this
# function could be run and not find the source. Therefore, we currently record the first directory used
# by gitPullOrClone and record it in __mod_info to be used here - but this needs further work to handle
# other cases.
function rp_setPackageInfo() {
    local id="$1"
    local install_path="$(rp_getInstallPath $id)"
    [[ ! -d "$install_path" ]] && return 1
    local pkg="$install_path/retropie.pkg"
    local origin="$2"

    rp_clearCachedInfo "$id"

    iniConfig "=" '"' "$pkg"
    iniSet "pkg_origin" "$origin"
    local pkg_date
    local pkg_repo_type
    local pkg_repo_url
    local pkg_repo_branch
    local pkg_repo_commit
    local pkg_repo_date
    local pkg_repo_extra

    if [[ "$origin" == "binary" ]]; then
        pkg_date="$(rp_getBinaryDate $id)"
        iniSet "pkg_date" "$pkg_date"
    else
        pkg_date="$(date -Iseconds)"
        pkg_repo_type="${__mod_info[$id/repo_type]}"
        pkg_repo_url="$(rp_resolveRepoParam "${__mod_info[$id/repo_url]}")"
        pkg_repo_branch="$(rp_resolveRepoParam "${__mod_info[$id/repo_branch]}")"
        case "$pkg_repo_type" in
            git|svn)
                if [[ "$pkg_repo_type" == "git" ]]; then
                    # if we have recorded a source install dir during gitPullOrClone use it, or default to md_build
                    local repo_dir="${__mod_info[$id/repo_dir]}"
                    [[ -z "$repo_dir" ]] && repo_dir="$md_build"
                    # date cannot understand the default date format of git
                    pkg_repo_date="$(git -C "$repo_dir" log -1 --format=%cI)"
                    pkg_repo_commit="$(git -C "$repo_dir" log -1 --format=%H)"
                else
                    pkg_repo_date="$(svn info . | grep -oP "Last Changed Date: \K.*")"
                    pkg_repo_date="$(date -Iseconds -d "$pkg_repo_date")"
                    pkg_repo_commit="$(svn info . | grep -oP "Last Changed Rev: \K.*")"
                fi
                ;;
            file)
                pkg_repo_date="$(rp_getFileDate "$pkg_repo_url")"
                ;;
            :*)
                # set data based on function hook - function should return code to define any pkg_* vars
                # eg. local pkg_repo_date="something"
                local function="${pkg_repo_type:1}"
                fnExists "$function" && eval $("$function" get)
                ;;
        esac

        iniSet "pkg_date" "$pkg_date"
        iniSet "pkg_repo_type" "$pkg_repo_type"
        iniSet "pkg_repo_url" "$pkg_repo_url"
        iniSet "pkg_repo_branch" "$pkg_repo_branch"
        iniSet "pkg_repo_commit" "$pkg_repo_commit"
        iniSet "pkg_repo_date" "$pkg_repo_date"
        iniSet "pkg_repo_extra" "$pkg_repo_extra"
    fi
}

# loads installed package information into __mod_info/pkg_* fields
# additional parameters are optional keys to load, but the data won't be cached if this is provided
function rp_loadPackageInfo() {
    local id="$1"

    # if we have cached the package information already, return
    [[ "${__mod_info[$id/pkg_info]}" -eq 1 ]] && return

    local keys
    local cache=1
    if [[ -z "$2" ]]; then
        keys=(
            pkg_origin
            pkg_date
            pkg_repo_type
            pkg_repo_url
            pkg_repo_branch
            pkg_repo_commit
            pkg_repo_date
            pkg_repo_extra
        )
    else
        # get user supplied keys but don't cache
        shift
        keys=("$@")
        cache=0
    fi

    local load=0
    local pkg_file="$(rp_getInstallPath $id)/retropie.pkg"

    local builder_pkg_file="$__tmpdir/archives/$__binary_path/${__mod_info[$id/type]}/$id.pkg"
    # fallback to using package info for built binaries so the binary builder code can update only changed modules
    if [[ ! -f "$pkg_file" && -f "$builder_pkg_file" ]]; then
        pkg_file="$builder_pkg_file"
    fi

    # if the pkg file is available, we will load the data in the next loop
    [[ -f "$pkg_file" ]] && load=1

    local key
    local data
    for key in "${keys[@]}"; do
        # clear any previous data we have stored, but default "pkg_origin" to "unknown"
        data=""
        [[ "$key" == "pkg_origin" ]] && data="unknown"
        __mod_info[$id/$key]="$data"

        # if the package file is available and the field is set, override the default values
        if [[ "$load" -eq 1 ]]; then
            data="$(grep -oP "$key=\"\K[^\"]+" "$pkg_file")"
            [[ -n "$data" ]] && __mod_info[$id/$key]="$data"
        fi
    done
    # if loading all data set pkg_info to 1 so we avoid loading when not needed
    [[ "$cache" -eq 1 ]] && __mod_info[$id/pkg_info]=1
}

function rp_registerModule() {
    local path="$1"
    local type="$2"
    local vendor="$3"
    # type is the last folder in the path as we now send a full path to rp_registerModule
    type="${type##*/}"
    local rp_module_id=""
    local rp_module_desc=""
    local rp_module_help=""
    local rp_module_licence=""
    local rp_module_section=""
    local rp_module_flags=""
    local rp_module_repo=""

    local error=0

    # for 3rd party modules, extract the module id and make sure it is unique
    # as we don't want 3rd party repos overriding our built-in modules
    if [[ "$vendor" != "RetroPie" ]]; then
        rp_module_id=$(grep -oP "rp_module_id=\"\K([^\"]+)" "$path")
        if [[ -n "${__mod_idx[$rp_module_id]}" ]]; then
            __INFMSGS+=("Module $path was skipped as $rp_module_id is already used by ${__mod_info[$rp_module_id/path]}")
            return
        fi
    fi

    source "$path"

    local var
    for var in rp_module_id rp_module_desc; do
        if [[ -z "${!var}" ]]; then
            echo "Module $module_path is missing valid $var"
            error=1
        fi
    done
    [[ $error -eq 1 ]] && exit 1

    local flags=($rp_module_flags)
    local flag
    local enabled=1

    # flags are parsed in the order provided in the module - so the !all flag only makes sense first
    # by default modules are enabled for all platforms
    if [[ "$__ignore_flags" -ne 1 ]]; then
        for flag in "${flags[@]}"; do
            # !all excludes the module from all platforms
            if [[ "$flag" == "!all" ]]; then
                enabled=0
                continue
            fi
            # flags without ! make the module valid for the platform
            if isPlatform "$flag"; then
                enabled=1
                continue
            fi
            # flags with !flag will exclude the module for the platform
            if [[ "$flag" =~ ^\!(.+) ]] && isPlatform "${BASH_REMATCH[1]}"; then
                enabled=0
                continue
            fi
        done
    fi

    local sections=($rp_module_section)
    # get default section
    rp_module_section="${sections[0]}"

    # loop through any additional flag=section parameters
    local flag section
    for section in "${sections[@]:1}"; do
        section=(${section/=/ })
        flag="${section[0]}"
        section="${section[1]}"
        isPlatform "$flag" && rp_module_section="$section"
    done

    # create numerical index for each module id from nunber of added modules
    __mod_idx["$rp_module_id"]="${#__mod_id[@]}"
    __mod_id+=("$rp_module_id")
    __mod_info["$rp_module_id/enabled"]="$enabled"
    __mod_info["$rp_module_id/path"]="$path"
    __mod_info["$rp_module_id/vendor"]="$vendor"
    __mod_info["$rp_module_id/type"]="$type"
    __mod_info["$rp_module_id/desc"]="$rp_module_desc"
    __mod_info["$rp_module_id/help"]="$rp_module_help"
    __mod_info["$rp_module_id/licence"]="$rp_module_licence"
    __mod_info["$rp_module_id/section"]="$rp_module_section"
    __mod_info["$rp_module_id/flags"]="$rp_module_flags"

    # split module repo into type, url, branch and commit
    if [[ -n "$rp_module_repo" ]]; then
        local repo=($rp_module_repo)
        __mod_info["$rp_module_id/repo_type"]="${repo[0]}"
        __mod_info["$rp_module_id/repo_url"]="${repo[1]}"
        __mod_info["$rp_module_id/repo_branch"]="${repo[2]}"
        __mod_info["$rp_module_id/repo_commit"]="${repo[3]}"
    fi
}

function rp_registerModuleDir() {
    local dir="$1"
    [[ ! -d "$dir" ]] && return 1
    local vendor="$2"
    [[ -z "$vendor" ]] && return 1
    local module
    while read module; do
        rp_registerModule "$module" "$dir" "$vendor"
    done < <(find "$dir" -mindepth 1 -maxdepth 1 -type f -name "*.sh" | sort)
    return 0
}

function rp_registerAllModules() {
    __mod_id=()
    declare -Ag __mod_idx=()
    declare -Ag __mod_info=()

    local dir
    local type
    local vendor
    while read dir; do
        # get parent folder
        vendor="${dir%/*}"
        # if the folder isn't RetroPie-Setup then get the repo name which will be used for module vendor
        if [[ "$vendor" != "$scriptdir" ]]; then
            vendor="${vendor##*/}"
        else
            vendor="RetroPie"
        fi

        for type in emulators libretrocores ports supplementary admin; do
            rp_registerModuleDir "$dir/$type" "$vendor"
        done
    done < <(find "$scriptdir"/scriptmodules "$scriptdir"/ext/*/scriptmodules -maxdepth 0 2>/dev/null)
}

function rp_getSectionIds() {
    local section
    local id
    local ids=()
    for id in "${__mod_id[@]}"; do
        for section in "$@"; do
            [[ "${__mod_info[$id/section]}" == "$section" ]] && ids+=("$id")
        done
    done
    echo "${ids[@]}"
}

function rp_isInstalled() {
    local id="$1"
    local md_inst="$rootdir/${__mod_info[$id/type]}/$id"
    [[ -d "$md_inst" ]] && return 0
    return 1
}

function rp_isEnabled() {
    local id="$1"
    [[ "${__mod_info[$id/enabled]}" -eq 0 ]] && return 1
    return 0
}

function rp_updateHooks() {
    local function
    local id
    for function in $(compgen -A function _update_hook_); do
        id="${function/_update_hook_/}"
        [[ -n "$id" && "${__mod_info[$id/enabled]}" -eq 1 ]] && rp_callModule "$id" _update_hook
    done
}