Design a Notch filter

[yashsaini2727]

Use Eagle software to build a schematic of the Notch filter.
We will be using OTA notch filters (Gm-C filters) for continuous-time filtering.
[An alternative is an op-amp notch filter but it is mostly for digital signals; to deal with analogue signals to a high degree of accuracy, OTAs are used]
The file is to be submitted as notch_filter.sch

• the schematic should be of 2nd-Order Gm-C Notch Filter (the higher the order the better)
• The purpose of a notch filter is to exclude a single frequency from the EEG signal. (in our case it will be 50 Hz)
• Notch depth should be more than 50 dB.
• use operational transconductance amplifier (OTA) model OTA LM13700
• Here is a paper that can be used as a reference. further reading