/
DallasTemperature.ino
91 lines (73 loc) · 3.49 KB
/
DallasTemperature.ino
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
/*
Copyright (C) AC SOFTWARE SP. Z O.O.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <SuplaDevice.h>
/*
* This example requires Dallas Temperature Control library installed.
* https://github.com/milesburton/Arduino-Temperature-Control-Library
*/
// Add include to DS sensor
#include <supla/sensor/DS18B20.h>
// Choose proper network interface for your card:
#ifdef ARDUINO_ARCH_AVR
// Arduino Mega with EthernetShield W5100:
#include <supla/network/ethernet_shield.h>
// Ethernet MAC address
uint8_t mac[6] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05};
Supla::EthernetShield ethernet(mac);
// Arduino Mega with ENC28J60:
// #include <supla/network/ENC28J60.h>
// Supla::ENC28J60 ethernet(mac);
#elif defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
// ESP8266 and ESP32 based board:
#include <supla/network/esp_wifi.h>
Supla::ESPWifi wifi("your_wifi_ssid", "your_wifi_password");
#endif
void setup() {
Serial.begin(115200);
// Replace the falowing GUID with value that you can retrieve from https://www.supla.org/arduino/get-guid
char GUID[SUPLA_GUID_SIZE] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
// Replace the following AUTHKEY with value that you can retrieve from: https://www.supla.org/arduino/get-authkey
char AUTHKEY[SUPLA_AUTHKEY_SIZE] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
/*
* Having your device already registered at cloud.supla.org,
* you want to change CHANNEL sequence or remove any of them,
* then you must also remove the device itself from cloud.supla.org.
* Otherwise you will get "Channel conflict!" error.
*/
// CHANNEL0-3 - Thermometer DS18B20
// 4 DS18B20 thermometers at pin 23. DS address can be omitted when there is only one device at a pin
DeviceAddress ds1addr = {0x28, 0xFF, 0xC8, 0xAB, 0x6E, 0x18, 0x01, 0xFC};
DeviceAddress ds2addr = {0x28, 0xFF, 0x54, 0x73, 0x6E, 0x18, 0x01, 0x77};
DeviceAddress ds3addr = {0x28, 0xFF, 0x55, 0xCA, 0x6B, 0x18, 0x01, 0x8D};
DeviceAddress ds4addr = {0x28, 0xFF, 0x4F, 0xAB, 0x6E, 0x18, 0x01, 0x66};
new Supla::Sensor::DS18B20(23, ds1addr);
new Supla::Sensor::DS18B20(23, ds2addr);
new Supla::Sensor::DS18B20(23, ds3addr);
new Supla::Sensor::DS18B20(23, ds4addr);
/*
* SuplaDevice Initialization.
* Server address, LocationID and LocationPassword are available at https://cloud.supla.org
* If you do not have an account, you can create it at https://cloud.supla.org/account/create
* SUPLA and SUPLA CLOUD are free of charge
*
*/
SuplaDevice.begin(GUID, // Global Unique Identifier
"svr1.supla.org", // SUPLA server address
"email@address", // Email address used to login to Supla Cloud
AUTHKEY); // Authorization key
}
void loop() {
SuplaDevice.iterate();
}