mk20dx128.h

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2013 PJRC.COM, LLC.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be 
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows 
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef _mk20dx128_h_
#define _mk20dx128_h_

//#define F_CPU 96000000
//#define F_CPU 48000000
//#define F_CPU 24000000
//#define F_BUS 48000000
//#define F_BUS 24000000
//#define F_MEM 24000000

#if (F_CPU == 96000000)
 #define F_BUS 48000000
 #define F_MEM 24000000
#elif (F_CPU == 48000000)
 #define F_BUS 48000000
 #define F_MEM 24000000
#elif (F_CPU == 24000000)
 #define F_BUS 24000000
 #define F_MEM 24000000
#endif


#ifndef NULL
#define NULL ((void *)0)
#endif

#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif

// chapter 11: Port control and interrupts (PORT)
#define PORTA_PCR0		*(volatile uint32_t *)0x40049000 // Pin Control Register n
#define PORT_PCR_ISF			(uint32_t)0x01000000		// Interrupt Status Flag
#define PORT_PCR_IRQC(n)		(uint32_t)(((n) & 15) << 16)	// Interrupt Configuration
#define PORT_PCR_IRQC_MASK		(uint32_t)0x000F0000
#define PORT_PCR_LK			(uint32_t)0x00008000		// Lock Register
#define PORT_PCR_MUX(n)			(uint32_t)(((n) & 7) << 8)	// Pin Mux Control
#define PORT_PCR_MUX_MASK		(uint32_t)0x00000700
#define PORT_PCR_DSE			(uint32_t)0x00000040		// Drive Strength Enable
#define PORT_PCR_ODE			(uint32_t)0x00000020		// Open Drain Enable
#define PORT_PCR_PFE			(uint32_t)0x00000010		// Passive Filter Enable
#define PORT_PCR_SRE			(uint32_t)0x00000004		// Slew Rate Enable
#define PORT_PCR_PE			(uint32_t)0x00000002		// Pull Enable
#define PORT_PCR_PS			(uint32_t)0x00000001		// Pull Select
#define PORTA_PCR1		*(volatile uint32_t *)0x40049004 // Pin Control Register n
#define PORTA_PCR2		*(volatile uint32_t *)0x40049008 // Pin Control Register n
#define PORTA_PCR3		*(volatile uint32_t *)0x4004900C // Pin Control Register n
#define PORTA_PCR4		*(volatile uint32_t *)0x40049010 // Pin Control Register n
#define PORTA_PCR5		*(volatile uint32_t *)0x40049014 // Pin Control Register n
#define PORTA_PCR6		*(volatile uint32_t *)0x40049018 // Pin Control Register n
#define PORTA_PCR7		*(volatile uint32_t *)0x4004901C // Pin Control Register n
#define PORTA_PCR8		*(volatile uint32_t *)0x40049020 // Pin Control Register n
#define PORTA_PCR9		*(volatile uint32_t *)0x40049024 // Pin Control Register n
#define PORTA_PCR10		*(volatile uint32_t *)0x40049028 // Pin Control Register n
#define PORTA_PCR11		*(volatile uint32_t *)0x4004902C // Pin Control Register n
#define PORTA_PCR12		*(volatile uint32_t *)0x40049030 // Pin Control Register n
#define PORTA_PCR13		*(volatile uint32_t *)0x40049034 // Pin Control Register n
#define PORTA_PCR14		*(volatile uint32_t *)0x40049038 // Pin Control Register n
#define PORTA_PCR15		*(volatile uint32_t *)0x4004903C // Pin Control Register n
#define PORTA_PCR16		*(volatile uint32_t *)0x40049040 // Pin Control Register n
#define PORTA_PCR17		*(volatile uint32_t *)0x40049044 // Pin Control Register n
#define PORTA_PCR18		*(volatile uint32_t *)0x40049048 // Pin Control Register n
#define PORTA_PCR19		*(volatile uint32_t *)0x4004904C // Pin Control Register n
#define PORTA_PCR20		*(volatile uint32_t *)0x40049050 // Pin Control Register n
#define PORTA_PCR21		*(volatile uint32_t *)0x40049054 // Pin Control Register n
#define PORTA_PCR22		*(volatile uint32_t *)0x40049058 // Pin Control Register n
#define PORTA_PCR23		*(volatile uint32_t *)0x4004905C // Pin Control Register n
#define PORTA_PCR24		*(volatile uint32_t *)0x40049060 // Pin Control Register n
#define PORTA_PCR25		*(volatile uint32_t *)0x40049064 // Pin Control Register n
#define PORTA_PCR26		*(volatile uint32_t *)0x40049068 // Pin Control Register n
#define PORTA_PCR27		*(volatile uint32_t *)0x4004906C // Pin Control Register n
#define PORTA_PCR28		*(volatile uint32_t *)0x40049070 // Pin Control Register n
#define PORTA_PCR29		*(volatile uint32_t *)0x40049074 // Pin Control Register n
#define PORTA_PCR30		*(volatile uint32_t *)0x40049078 // Pin Control Register n
#define PORTA_PCR31		*(volatile uint32_t *)0x4004907C // Pin Control Register n
#define PORTA_GPCLR		*(volatile uint32_t *)0x40049080 // Global Pin Control Low Register
#define PORTA_GPCHR		*(volatile uint32_t *)0x40049084 // Global Pin Control High Register
#define PORTA_ISFR		*(volatile uint32_t *)0x400490A0 // Interrupt Status Flag Register
#define PORTB_PCR0		*(volatile uint32_t *)0x4004A000 // Pin Control Register n
#define PORTB_PCR1		*(volatile uint32_t *)0x4004A004 // Pin Control Register n
#define PORTB_PCR2		*(volatile uint32_t *)0x4004A008 // Pin Control Register n
#define PORTB_PCR3		*(volatile uint32_t *)0x4004A00C // Pin Control Register n
#define PORTB_PCR4		*(volatile uint32_t *)0x4004A010 // Pin Control Register n
#define PORTB_PCR5		*(volatile uint32_t *)0x4004A014 // Pin Control Register n
#define PORTB_PCR6		*(volatile uint32_t *)0x4004A018 // Pin Control Register n
#define PORTB_PCR7		*(volatile uint32_t *)0x4004A01C // Pin Control Register n
#define PORTB_PCR8		*(volatile uint32_t *)0x4004A020 // Pin Control Register n
#define PORTB_PCR9		*(volatile uint32_t *)0x4004A024 // Pin Control Register n
#define PORTB_PCR10		*(volatile uint32_t *)0x4004A028 // Pin Control Register n
#define PORTB_PCR11		*(volatile uint32_t *)0x4004A02C // Pin Control Register n
#define PORTB_PCR12		*(volatile uint32_t *)0x4004A030 // Pin Control Register n
#define PORTB_PCR13		*(volatile uint32_t *)0x4004A034 // Pin Control Register n
#define PORTB_PCR14		*(volatile uint32_t *)0x4004A038 // Pin Control Register n
#define PORTB_PCR15		*(volatile uint32_t *)0x4004A03C // Pin Control Register n
#define PORTB_PCR16		*(volatile uint32_t *)0x4004A040 // Pin Control Register n
#define PORTB_PCR17		*(volatile uint32_t *)0x4004A044 // Pin Control Register n
#define PORTB_PCR18		*(volatile uint32_t *)0x4004A048 // Pin Control Register n
#define PORTB_PCR19		*(volatile uint32_t *)0x4004A04C // Pin Control Register n
#define PORTB_PCR20		*(volatile uint32_t *)0x4004A050 // Pin Control Register n
#define PORTB_PCR21		*(volatile uint32_t *)0x4004A054 // Pin Control Register n
#define PORTB_PCR22		*(volatile uint32_t *)0x4004A058 // Pin Control Register n
#define PORTB_PCR23		*(volatile uint32_t *)0x4004A05C // Pin Control Register n
#define PORTB_PCR24		*(volatile uint32_t *)0x4004A060 // Pin Control Register n
#define PORTB_PCR25		*(volatile uint32_t *)0x4004A064 // Pin Control Register n
#define PORTB_PCR26		*(volatile uint32_t *)0x4004A068 // Pin Control Register n
#define PORTB_PCR27		*(volatile uint32_t *)0x4004A06C // Pin Control Register n
#define PORTB_PCR28		*(volatile uint32_t *)0x4004A070 // Pin Control Register n
#define PORTB_PCR29		*(volatile uint32_t *)0x4004A074 // Pin Control Register n
#define PORTB_PCR30		*(volatile uint32_t *)0x4004A078 // Pin Control Register n
#define PORTB_PCR31		*(volatile uint32_t *)0x4004A07C // Pin Control Register n
#define PORTB_GPCLR		*(volatile uint32_t *)0x4004A080 // Global Pin Control Low Register
#define PORTB_GPCHR		*(volatile uint32_t *)0x4004A084 // Global Pin Control High Register
#define PORTB_ISFR		*(volatile uint32_t *)0x4004A0A0 // Interrupt Status Flag Register
#define PORTC_PCR0		*(volatile uint32_t *)0x4004B000 // Pin Control Register n
#define PORTC_PCR1		*(volatile uint32_t *)0x4004B004 // Pin Control Register n
#define PORTC_PCR2		*(volatile uint32_t *)0x4004B008 // Pin Control Register n
#define PORTC_PCR3		*(volatile uint32_t *)0x4004B00C // Pin Control Register n
#define PORTC_PCR4		*(volatile uint32_t *)0x4004B010 // Pin Control Register n
#define PORTC_PCR5		*(volatile uint32_t *)0x4004B014 // Pin Control Register n
#define PORTC_PCR6		*(volatile uint32_t *)0x4004B018 // Pin Control Register n
#define PORTC_PCR7		*(volatile uint32_t *)0x4004B01C // Pin Control Register n
#define PORTC_PCR8		*(volatile uint32_t *)0x4004B020 // Pin Control Register n
#define PORTC_PCR9		*(volatile uint32_t *)0x4004B024 // Pin Control Register n
#define PORTC_PCR10		*(volatile uint32_t *)0x4004B028 // Pin Control Register n
#define PORTC_PCR11		*(volatile uint32_t *)0x4004B02C // Pin Control Register n
#define PORTC_PCR12		*(volatile uint32_t *)0x4004B030 // Pin Control Register n
#define PORTC_PCR13		*(volatile uint32_t *)0x4004B034 // Pin Control Register n
#define PORTC_PCR14		*(volatile uint32_t *)0x4004B038 // Pin Control Register n
#define PORTC_PCR15		*(volatile uint32_t *)0x4004B03C // Pin Control Register n
#define PORTC_PCR16		*(volatile uint32_t *)0x4004B040 // Pin Control Register n
#define PORTC_PCR17		*(volatile uint32_t *)0x4004B044 // Pin Control Register n
#define PORTC_PCR18		*(volatile uint32_t *)0x4004B048 // Pin Control Register n
#define PORTC_PCR19		*(volatile uint32_t *)0x4004B04C // Pin Control Register n
#define PORTC_PCR20		*(volatile uint32_t *)0x4004B050 // Pin Control Register n
#define PORTC_PCR21		*(volatile uint32_t *)0x4004B054 // Pin Control Register n
#define PORTC_PCR22		*(volatile uint32_t *)0x4004B058 // Pin Control Register n
#define PORTC_PCR23		*(volatile uint32_t *)0x4004B05C // Pin Control Register n
#define PORTC_PCR24		*(volatile uint32_t *)0x4004B060 // Pin Control Register n
#define PORTC_PCR25		*(volatile uint32_t *)0x4004B064 // Pin Control Register n
#define PORTC_PCR26		*(volatile uint32_t *)0x4004B068 // Pin Control Register n
#define PORTC_PCR27		*(volatile uint32_t *)0x4004B06C // Pin Control Register n
#define PORTC_PCR28		*(volatile uint32_t *)0x4004B070 // Pin Control Register n
#define PORTC_PCR29		*(volatile uint32_t *)0x4004B074 // Pin Control Register n
#define PORTC_PCR30		*(volatile uint32_t *)0x4004B078 // Pin Control Register n
#define PORTC_PCR31		*(volatile uint32_t *)0x4004B07C // Pin Control Register n
#define PORTC_GPCLR		*(volatile uint32_t *)0x4004B080 // Global Pin Control Low Register
#define PORTC_GPCHR		*(volatile uint32_t *)0x4004B084 // Global Pin Control High Register
#define PORTC_ISFR		*(volatile uint32_t *)0x4004B0A0 // Interrupt Status Flag Register
#define PORTD_PCR0		*(volatile uint32_t *)0x4004C000 // Pin Control Register n
#define PORTD_PCR1		*(volatile uint32_t *)0x4004C004 // Pin Control Register n
#define PORTD_PCR2		*(volatile uint32_t *)0x4004C008 // Pin Control Register n
#define PORTD_PCR3		*(volatile uint32_t *)0x4004C00C // Pin Control Register n
#define PORTD_PCR4		*(volatile uint32_t *)0x4004C010 // Pin Control Register n
#define PORTD_PCR5		*(volatile uint32_t *)0x4004C014 // Pin Control Register n
#define PORTD_PCR6		*(volatile uint32_t *)0x4004C018 // Pin Control Register n
#define PORTD_PCR7		*(volatile uint32_t *)0x4004C01C // Pin Control Register n
#define PORTD_PCR8		*(volatile uint32_t *)0x4004C020 // Pin Control Register n
#define PORTD_PCR9		*(volatile uint32_t *)0x4004C024 // Pin Control Register n
#define PORTD_PCR10		*(volatile uint32_t *)0x4004C028 // Pin Control Register n
#define PORTD_PCR11		*(volatile uint32_t *)0x4004C02C // Pin Control Register n
#define PORTD_PCR12		*(volatile uint32_t *)0x4004C030 // Pin Control Register n
#define PORTD_PCR13		*(volatile uint32_t *)0x4004C034 // Pin Control Register n
#define PORTD_PCR14		*(volatile uint32_t *)0x4004C038 // Pin Control Register n
#define PORTD_PCR15		*(volatile uint32_t *)0x4004C03C // Pin Control Register n
#define PORTD_PCR16		*(volatile uint32_t *)0x4004C040 // Pin Control Register n
#define PORTD_PCR17		*(volatile uint32_t *)0x4004C044 // Pin Control Register n
#define PORTD_PCR18		*(volatile uint32_t *)0x4004C048 // Pin Control Register n
#define PORTD_PCR19		*(volatile uint32_t *)0x4004C04C // Pin Control Register n
#define PORTD_PCR20		*(volatile uint32_t *)0x4004C050 // Pin Control Register n
#define PORTD_PCR21		*(volatile uint32_t *)0x4004C054 // Pin Control Register n
#define PORTD_PCR22		*(volatile uint32_t *)0x4004C058 // Pin Control Register n
#define PORTD_PCR23		*(volatile uint32_t *)0x4004C05C // Pin Control Register n
#define PORTD_PCR24		*(volatile uint32_t *)0x4004C060 // Pin Control Register n
#define PORTD_PCR25		*(volatile uint32_t *)0x4004C064 // Pin Control Register n
#define PORTD_PCR26		*(volatile uint32_t *)0x4004C068 // Pin Control Register n
#define PORTD_PCR27		*(volatile uint32_t *)0x4004C06C // Pin Control Register n
#define PORTD_PCR28		*(volatile uint32_t *)0x4004C070 // Pin Control Register n
#define PORTD_PCR29		*(volatile uint32_t *)0x4004C074 // Pin Control Register n
#define PORTD_PCR30		*(volatile uint32_t *)0x4004C078 // Pin Control Register n
#define PORTD_PCR31		*(volatile uint32_t *)0x4004C07C // Pin Control Register n
#define PORTD_GPCLR		*(volatile uint32_t *)0x4004C080 // Global Pin Control Low Register
#define PORTD_GPCHR		*(volatile uint32_t *)0x4004C084 // Global Pin Control High Register
#define PORTD_ISFR		*(volatile uint32_t *)0x4004C0A0 // Interrupt Status Flag Register
#define PORTE_PCR0		*(volatile uint32_t *)0x4004D000 // Pin Control Register n
#define PORTE_PCR1		*(volatile uint32_t *)0x4004D004 // Pin Control Register n
#define PORTE_PCR2		*(volatile uint32_t *)0x4004D008 // Pin Control Register n
#define PORTE_PCR3		*(volatile uint32_t *)0x4004D00C // Pin Control Register n
#define PORTE_PCR4		*(volatile uint32_t *)0x4004D010 // Pin Control Register n
#define PORTE_PCR5		*(volatile uint32_t *)0x4004D014 // Pin Control Register n
#define PORTE_PCR6		*(volatile uint32_t *)0x4004D018 // Pin Control Register n
#define PORTE_PCR7		*(volatile uint32_t *)0x4004D01C // Pin Control Register n
#define PORTE_PCR8		*(volatile uint32_t *)0x4004D020 // Pin Control Register n
#define PORTE_PCR9		*(volatile uint32_t *)0x4004D024 // Pin Control Register n
#define PORTE_PCR10		*(volatile uint32_t *)0x4004D028 // Pin Control Register n
#define PORTE_PCR11		*(volatile uint32_t *)0x4004D02C // Pin Control Register n
#define PORTE_PCR12		*(volatile uint32_t *)0x4004D030 // Pin Control Register n
#define PORTE_PCR13		*(volatile uint32_t *)0x4004D034 // Pin Control Register n
#define PORTE_PCR14		*(volatile uint32_t *)0x4004D038 // Pin Control Register n
#define PORTE_PCR15		*(volatile uint32_t *)0x4004D03C // Pin Control Register n
#define PORTE_PCR16		*(volatile uint32_t *)0x4004D040 // Pin Control Register n
#define PORTE_PCR17		*(volatile uint32_t *)0x4004D044 // Pin Control Register n
#define PORTE_PCR18		*(volatile uint32_t *)0x4004D048 // Pin Control Register n
#define PORTE_PCR19		*(volatile uint32_t *)0x4004D04C // Pin Control Register n
#define PORTE_PCR20		*(volatile uint32_t *)0x4004D050 // Pin Control Register n
#define PORTE_PCR21		*(volatile uint32_t *)0x4004D054 // Pin Control Register n
#define PORTE_PCR22		*(volatile uint32_t *)0x4004D058 // Pin Control Register n
#define PORTE_PCR23		*(volatile uint32_t *)0x4004D05C // Pin Control Register n
#define PORTE_PCR24		*(volatile uint32_t *)0x4004D060 // Pin Control Register n
#define PORTE_PCR25		*(volatile uint32_t *)0x4004D064 // Pin Control Register n
#define PORTE_PCR26		*(volatile uint32_t *)0x4004D068 // Pin Control Register n
#define PORTE_PCR27		*(volatile uint32_t *)0x4004D06C // Pin Control Register n
#define PORTE_PCR28		*(volatile uint32_t *)0x4004D070 // Pin Control Register n
#define PORTE_PCR29		*(volatile uint32_t *)0x4004D074 // Pin Control Register n
#define PORTE_PCR30		*(volatile uint32_t *)0x4004D078 // Pin Control Register n
#define PORTE_PCR31		*(volatile uint32_t *)0x4004D07C // Pin Control Register n
#define PORTE_GPCLR		*(volatile uint32_t *)0x4004D080 // Global Pin Control Low Register
#define PORTE_GPCHR		*(volatile uint32_t *)0x4004D084 // Global Pin Control High Register
#define PORTE_ISFR		*(volatile uint32_t *)0x4004D0A0 // Interrupt Status Flag Register

// Chapter 12: System Integration Module (SIM)
#define SIM_SOPT1		*(volatile uint32_t *)0x40047000 // System Options Register 1
#define SIM_SOPT1CFG		*(volatile uint32_t *)0x40047004 // SOPT1 Configuration Register
#define SIM_SOPT2		*(volatile uint32_t *)0x40048004 // System Options Register 2
#define SIM_SOPT2_USBSRC		(uint32_t)0x00040000		// 0=USB_CLKIN, 1=FFL/PLL 
#define SIM_SOPT2_PLLFLLSEL		(uint32_t)0x00010000		// 0=FLL, 1=PLL
#define SIM_SOPT2_TRACECLKSEL		(uint32_t)0x00001000		// 0=MCGOUTCLK, 1=CPU
#define SIM_SOPT2_PTD7PAD		(uint32_t)0x00000800		// 0=normal, 1=double drive PTD7
#define SIM_SOPT2_CLKOUTSEL(n)		(uint32_t)(((n) & 7) << 5)	// Selects the clock to output on the CLKOUT pin.
#define SIM_SOPT2_RTCCLKOUTSEL		(uint32_t)0x00000010		// RTC clock out select
#define SIM_SOPT4		*(volatile uint32_t *)0x4004800C // System Options Register 4
#define SIM_SOPT5		*(volatile uint32_t *)0x40048010 // System Options Register 5
#define SIM_SOPT7		*(volatile uint32_t *)0x40048018 // System Options Register 7
#define SIM_SDID		*(const	   uint32_t *)0x40048024 // System Device Identification Register
#define SIM_SCGC2		*(volatile uint32_t *)0x4004802C // System Clock Gating Control Register 2
#define SIM_SCGC2_DAC0			(uint32_t)0x00001000		// DAC0 Clock Gate Control
#define SIM_SCGC3		*(volatile uint32_t *)0x40048030 // System Clock Gating Control Register 3
#define SIM_SCGC3_ADC1			(uint32_t)0x08000000		// ADC1 Clock Gate Control
#define SIM_SCGC3_FTM2			(uint32_t)0x01000000		// FTM2 Clock Gate Control
#define SIM_SCGC4		*(volatile uint32_t *)0x40048034 // System Clock Gating Control Register 4
#define SIM_SCGC4_VREF			(uint32_t)0x00100000		// VREF Clock Gate Control
#define SIM_SCGC4_CMP			(uint32_t)0x00080000		// Comparator Clock Gate Control
#define SIM_SCGC4_USBOTG		(uint32_t)0x00040000		// USB Clock Gate Control
#define SIM_SCGC4_UART2			(uint32_t)0x00001000		// UART2 Clock Gate Control
#define SIM_SCGC4_UART1			(uint32_t)0x00000800		// UART1 Clock Gate Control
#define SIM_SCGC4_UART0			(uint32_t)0x00000400		// UART0 Clock Gate Control
#define SIM_SCGC4_I2C1			(uint32_t)0x00000080		// I2C1 Clock Gate Control
#define SIM_SCGC4_I2C0			(uint32_t)0x00000040		// I2C0 Clock Gate Control
#define SIM_SCGC4_CMT			(uint32_t)0x00000004		// CMT Clock Gate Control
#define SIM_SCGC4_EWM			(uint32_t)0x00000002		// EWM Clock Gate Control
#define SIM_SCGC5		*(volatile uint32_t *)0x40048038 // System Clock Gating Control Register 5
#define SIM_SCGC5_PORTE			(uint32_t)0x00002000		// Port E Clock Gate Control
#define SIM_SCGC5_PORTD			(uint32_t)0x00001000		// Port D Clock Gate Control
#define SIM_SCGC5_PORTC			(uint32_t)0x00000800		// Port C Clock Gate Control
#define SIM_SCGC5_PORTB			(uint32_t)0x00000400		// Port B Clock Gate Control
#define SIM_SCGC5_PORTA			(uint32_t)0x00000200		// Port A Clock Gate Control
#define SIM_SCGC5_TSI			(uint32_t)0x00000020		// Touch Sense Input TSI Clock Gate Control
#define SIM_SCGC5_LPTIMER		(uint32_t)0x00000001		// Low Power Timer Access Control
#define SIM_SCGC6		*(volatile uint32_t *)0x4004803C // System Clock Gating Control Register 6
#define SIM_SCGC6_RTC			(uint32_t)0x20000000		// RTC Access
#define SIM_SCGC6_ADC0			(uint32_t)0x08000000		// ADC0 Clock Gate Control
#define SIM_SCGC6_FTM1			(uint32_t)0x02000000		// FTM1 Clock Gate Control
#define SIM_SCGC6_FTM0			(uint32_t)0x01000000		// FTM0 Clock Gate Control
#define SIM_SCGC6_PIT			(uint32_t)0x00800000		// PIT Clock Gate Control
#define SIM_SCGC6_PDB			(uint32_t)0x00400000		// PDB Clock Gate Control
#define SIM_SCGC6_USBDCD		(uint32_t)0x00200000		// USB DCD Clock Gate Control
#define SIM_SCGC6_CRC			(uint32_t)0x00040000		// CRC Clock Gate Control
#define SIM_SCGC6_I2S			(uint32_t)0x00008000		// I2S Clock Gate Control
#define SIM_SCGC6_SPI1			(uint32_t)0x00002000		// SPI1 Clock Gate Control
#define SIM_SCGC6_SPI0			(uint32_t)0x00001000		// SPI0 Clock Gate Control
#define SIM_SCGC6_FLEXCAN0		(uint32_t)0x00000010		// FlexCAN0 Clock Gate Control
#define SIM_SCGC6_DMAMUX		(uint32_t)0x00000002		// DMA Mux Clock Gate Control
#define SIM_SCGC6_FTFL			(uint32_t)0x00000001		// Flash Memory Clock Gate Control
#define SIM_SCGC7		*(volatile uint32_t *)0x40048040 // System Clock Gating Control Register 7
#define SIM_SCGC7_DMA			(uint32_t)0x00000002		// DMA Clock Gate Control
#define SIM_CLKDIV1		*(volatile uint32_t *)0x40048044 // System Clock Divider Register 1
#define SIM_CLKDIV1_OUTDIV1(n)		(uint32_t)(((n) & 0x0F) << 28)	// divide value for the core/system clock
#define SIM_CLKDIV1_OUTDIV2(n)		(uint32_t)(((n) & 0x0F) << 24)	// divide value for the peripheral clock
#define SIM_CLKDIV1_OUTDIV4(n)		(uint32_t)(((n) & 0x0F) << 16)	// divide value for the flash clock
#define SIM_CLKDIV2		*(volatile uint32_t *)0x40048048 // System Clock Divider Register 2
#define SIM_CLKDIV2_USBDIV(n)		(uint32_t)(((n) & 0x07) << 1)
#define SIM_CLKDIV2_USBFRAC		(uint32_t)0x01
#define SIM_FCFG1		*(const	   uint32_t *)0x4004804C // Flash Configuration Register 1
#define SIM_FCFG2		*(const	   uint32_t *)0x40048050 // Flash Configuration Register 2
#define SIM_UIDH		*(const	   uint32_t *)0x40048054 // Unique Identification Register High
#define SIM_UIDMH		*(const	   uint32_t *)0x40048058 // Unique Identification Register Mid-High
#define SIM_UIDML		*(const	   uint32_t *)0x4004805C // Unique Identification Register Mid Low
#define SIM_UIDL		*(const	   uint32_t *)0x40048060 // Unique Identification Register Low

// Chapter 13: Reset Control Module (RCM)
#define RCM_SRS0		*(volatile uint8_t  *)0x4007F000 // System Reset Status Register 0
#define RCM_SRS1		*(volatile uint8_t  *)0x4007F001 // System Reset Status Register 1
#define RCM_RPFC		*(volatile uint8_t  *)0x4007F004 // Reset Pin Filter Control Register
#define RCM_RPFW		*(volatile uint8_t  *)0x4007F005 // Reset Pin Filter Width Register
#define RCM_MR			*(volatile uint8_t  *)0x4007F007 // Mode Register

// Chapter 14: System Mode Controller
#define SMC_PMPROT		*(volatile uint8_t  *)0x4007E000 // Power Mode Protection Register
#define SMC_PMPROT_AVLP			(uint8_t)0x20			// Allow very low power modes
#define SMC_PMPROT_ALLS			(uint8_t)0x08			// Allow low leakage stop mode
#define SMC_PMPROT_AVLLS		(uint8_t)0x02			// Allow very low leakage stop mode
#define SMC_PMCTRL		*(volatile uint8_t  *)0x4007E001 // Power Mode Control Register
#define SMC_PMCTRL_LPWUI		(uint8_t)0x80			// Low Power Wake Up on Interrupt
#define SMC_PMCTRL_RUNM(n)		(uint8_t)(((n) & 0x03) << 5)	// Run Mode Control
#define SMC_PMCTRL_STOPA		(uint8_t)0x08			// Stop Aborted
#define SMC_PMCTRL_STOPM(n)		(uint8_t)((n) & 0x07)		// Stop Mode Control
#define SMC_VLLSCTRL		*(volatile uint8_t  *)0x4007E002 // VLLS Control Register
#define SMC_VLLSCTRL_PORPO		(uint8_t)0x20			// POR Power Option
#define SMC_VLLSCTRL_VLLSM(n)		(uint8_t)((n) & 0x07)		// VLLS Mode Control
#define SMC_PMSTAT		*(volatile uint8_t  *)0x4007E003 // Power Mode Status Register
#define SMC_PMSTAT_RUN			(uint8_t)0x01			// Current power mode is RUN
#define SMC_PMSTAT_STOP			(uint8_t)0x02			// Current power mode is STOP
#define SMC_PMSTAT_VLPR			(uint8_t)0x04			// Current power mode is VLPR
#define SMC_PMSTAT_VLPW			(uint8_t)0x08			// Current power mode is VLPW
#define SMC_PMSTAT_VLPS			(uint8_t)0x10			// Current power mode is VLPS
#define SMC_PMSTAT_LLS			(uint8_t)0x20			// Current power mode is LLS
#define SMC_PMSTAT_VLLS			(uint8_t)0x40			// Current power mode is VLLS

// Chapter 15: Power Management Controller
#define PMC_LVDSC1		*(volatile uint8_t  *)0x4007D000 // Low Voltage Detect Status And Control 1 register
#define PMC_LVDSC1_LVDF			(uint8_t)0x80			// Low-Voltage Detect Flag
#define PMC_LVDSC1_LVDACK		(uint8_t)0x40			// Low-Voltage Detect Acknowledge
#define PMC_LVDSC1_LVDIE		(uint8_t)0x20			// Low-Voltage Detect Interrupt Enable
#define PMC_LVDSC1_LVDRE		(uint8_t)0x10			// Low-Voltage Detect Reset Enable
#define PMC_LVDSC1_LVDV(n)		(uint8_t)((n) & 0x03)		// Low-Voltage Detect Voltage Select
#define PMC_LVDSC2		*(volatile uint8_t  *)0x4007D001 // Low Voltage Detect Status And Control 2 register
#define PMC_LVDSC2_LVWF			(uint8_t)0x80			// Low-Voltage Warning Flag
#define PMC_LVDSC2_LVWACK		(uint8_t)0x40			// Low-Voltage Warning Acknowledge
#define PMC_LVDSC2_LVWIE		(uint8_t)0x20			// Low-Voltage Warning Interrupt Enable
#define PMC_LVDSC2_LVWV(n)		(uint8_t)((n) & 0x03)		// Low-Voltage Warning Voltage Select
#define PMC_REGSC		*(volatile uint8_t  *)0x4007D002 // Regulator Status And Control register
#define PMC_REGSC_BGEN			(uint8_t)0x10			// Bandgap Enable In VLPx Operation
#define PMC_REGSC_ACKISO		(uint8_t)0x08			// Acknowledge Isolation
#define PMC_REGSC_REGONS		(uint8_t)0x04			// Regulator In Run Regulation Status
#define PMC_REGSC_BGBE			(uint8_t)0x01			// Bandgap Buffer Enable

// Chapter 16: Low-Leakage Wakeup Unit (LLWU)
#define LLWU_PE1		*(volatile uint8_t  *)0x4007C000 // LLWU Pin Enable 1 register
#define LLWU_PE2		*(volatile uint8_t  *)0x4007C001 // LLWU Pin Enable 2 register
#define LLWU_PE3		*(volatile uint8_t  *)0x4007C002 // LLWU Pin Enable 3 register
#define LLWU_PE4		*(volatile uint8_t  *)0x4007C003 // LLWU Pin Enable 4 register
#define LLWU_ME			*(volatile uint8_t  *)0x4007C004 // LLWU Module Enable register
#define LLWU_F1			*(volatile uint8_t  *)0x4007C005 // LLWU Flag 1 register
#define LLWU_F2			*(volatile uint8_t  *)0x4007C006 // LLWU Flag 2 register
#define LLWU_F3			*(volatile uint8_t  *)0x4007C007 // LLWU Flag 3 register
#define LLWU_FILT1		*(volatile uint8_t  *)0x4007C008 // LLWU Pin Filter 1 register
#define LLWU_FILT2		*(volatile uint8_t  *)0x4007C009 // LLWU Pin Filter 2 register
#define LLWU_RST		*(volatile uint8_t  *)0x4007C00A // LLWU Reset Enable register

// Chapter 17: Miscellaneous Control Module (MCM)
#define MCM_PLASC		*(volatile uint16_t *)0xE0080008 // Crossbar Switch (AXBS) Slave Configuration
#define MCM_PLAMC		*(volatile uint16_t *)0xE008000A // Crossbar Switch (AXBS) Master Configuration
#define MCM_PLACR		*(volatile uint32_t *)0xE008000C // Crossbar Switch (AXBS) Control Register (MK20DX128)
#define MCM_PLACR_ARG			(uint32_t)0x00000200		// Arbitration select, 0=fixed, 1=round-robin
#define MCM_CR			*(volatile uint32_t *)0xE008000C // RAM arbitration control register (MK20DX256)
#define MCM_CR_SRAMLWP			(uint32_t)0x40000000		// SRAM_L write protect
#define MCM_CR_SRAMLAP(n)		(uint32_t)(((n) & 0x03) << 28)	// SRAM_L priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA
#define MCM_CR_SRAMUWP			(uint32_t)0x04000000		// SRAM_U write protect
#define MCM_CR_SRAMUAP(n)		(uint32_t)(((n) & 0x03) << 24)	// SRAM_U priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA

// Crossbar Switch (AXBS) - only programmable on MK20DX256
#define AXBS_PRS0		*(volatile uint32_t *)0x40004000 // Priority Registers Slave 0
#define AXBS_CRS0		*(volatile uint32_t *)0x40004010 // Control Register 0
#define AXBS_PRS1		*(volatile uint32_t *)0x40004100 // Priority Registers Slave 1
#define AXBS_CRS1		*(volatile uint32_t *)0x40004110 // Control Register 1
#define AXBS_PRS2		*(volatile uint32_t *)0x40004200 // Priority Registers Slave 2
#define AXBS_CRS2		*(volatile uint32_t *)0x40004210 // Control Register 2
#define AXBS_PRS3		*(volatile uint32_t *)0x40004300 // Priority Registers Slave 3
#define AXBS_CRS3		*(volatile uint32_t *)0x40004310 // Control Register 3
#define AXBS_PRS4		*(volatile uint32_t *)0x40004400 // Priority Registers Slave 4
#define AXBS_CRS4		*(volatile uint32_t *)0x40004410 // Control Register 4
#define AXBS_PRS5		*(volatile uint32_t *)0x40004500 // Priority Registers Slave 5
#define AXBS_CRS5		*(volatile uint32_t *)0x40004510 // Control Register 5
#define AXBS_PRS6		*(volatile uint32_t *)0x40004600 // Priority Registers Slave 6
#define AXBS_CRS6		*(volatile uint32_t *)0x40004610 // Control Register 6
#define AXBS_PRS7		*(volatile uint32_t *)0x40004700 // Priority Registers Slave 7
#define AXBS_CRS7		*(volatile uint32_t *)0x40004710 // Control Register 7
#define AXBS_MGPCR0		*(volatile uint32_t *)0x40004800 // Master 0 General Purpose Control Register
#define AXBS_MGPCR1		*(volatile uint32_t *)0x40004900 // Master 1 General Purpose Control Register
#define AXBS_MGPCR2		*(volatile uint32_t *)0x40004A00 // Master 2 General Purpose Control Register
#define AXBS_MGPCR3		*(volatile uint32_t *)0x40004B00 // Master 3 General Purpose Control Register
#define AXBS_MGPCR4		*(volatile uint32_t *)0x40004C00 // Master 4 General Purpose Control Register
#define AXBS_MGPCR5		*(volatile uint32_t *)0x40004D00 // Master 5 General Purpose Control Register
#define AXBS_MGPCR6		*(volatile uint32_t *)0x40004E00 // Master 6 General Purpose Control Register
#define AXBS_MGPCR7		*(volatile uint32_t *)0x40004F00 // Master 7 General Purpose Control Register
#define AXBS_CRS_READONLY		(uint32_t)0x80000000
#define AXBS_CRS_HALTLOWPRIORITY	(uint32_t)0x40000000
#define AXBS_CRS_ARB_FIXED		(uint32_t)0x00000000
#define AXBS_CRS_ARB_ROUNDROBIN		(uint32_t)0x00010000
#define AXBS_CRS_PARK_FIXED		(uint32_t)0x00000000
#define AXBS_CRS_PARK_PREVIOUS		(uint32_t)0x00000010
#define AXBS_CRS_PARK_NONE		(uint32_t)0x00000020
#define AXBS_CRS_PARK(n)		(uint32_t)(((n) & 7) << 0)



// Chapter 20: Direct Memory Access Multiplexer (DMAMUX)
#define DMAMUX0_CHCFG0		*(volatile uint8_t  *)0x40021000 // Channel Configuration register
#define DMAMUX0_CHCFG1		*(volatile uint8_t  *)0x40021001 // Channel Configuration register
#define DMAMUX0_CHCFG2		*(volatile uint8_t  *)0x40021002 // Channel Configuration register
#define DMAMUX0_CHCFG3		*(volatile uint8_t  *)0x40021003 // Channel Configuration register
#define DMAMUX0_CHCFG4		*(volatile uint8_t  *)0x40021004 // Channel Configuration register
#define DMAMUX0_CHCFG5		*(volatile uint8_t  *)0x40021005 // Channel Configuration register
#define DMAMUX0_CHCFG6		*(volatile uint8_t  *)0x40021006 // Channel Configuration register
#define DMAMUX0_CHCFG7		*(volatile uint8_t  *)0x40021007 // Channel Configuration register
#define DMAMUX0_CHCFG8		*(volatile uint8_t  *)0x40021008 // Channel Configuration register
#define DMAMUX0_CHCFG9		*(volatile uint8_t  *)0x40021009 // Channel Configuration register
#define DMAMUX0_CHCFG10		*(volatile uint8_t  *)0x4002100A // Channel Configuration register
#define DMAMUX0_CHCFG11		*(volatile uint8_t  *)0x4002100B // Channel Configuration register
#define DMAMUX0_CHCFG12		*(volatile uint8_t  *)0x4002100C // Channel Configuration register
#define DMAMUX0_CHCFG13		*(volatile uint8_t  *)0x4002100D // Channel Configuration register
#define DMAMUX0_CHCFG14		*(volatile uint8_t  *)0x4002100E // Channel Configuration register
#define DMAMUX0_CHCFG15		*(volatile uint8_t  *)0x4002100F // Channel Configuration register
#define DMAMUX_DISABLE			0
#define DMAMUX_TRIG			64
#define DMAMUX_ENABLE			128
#define DMAMUX_SOURCE_UART0_RX		2
#define DMAMUX_SOURCE_UART0_TX		3
#define DMAMUX_SOURCE_UART1_RX		4
#define DMAMUX_SOURCE_UART1_TX		5
#define DMAMUX_SOURCE_UART2_RX		6
#define DMAMUX_SOURCE_UART2_TX		7
#define DMAMUX_SOURCE_I2S0_RX		14
#define DMAMUX_SOURCE_I2S0_TX		15
#define DMAMUX_SOURCE_SPI0_RX		16
#define DMAMUX_SOURCE_SPI0_TX		17
#define DMAMUX_SOURCE_I2C0		22
#define DMAMUX_SOURCE_I2C1		23
#define DMAMUX_SOURCE_FTM0_CH0		24
#define DMAMUX_SOURCE_FTM0_CH1		25
#define DMAMUX_SOURCE_FTM0_CH2		26
#define DMAMUX_SOURCE_FTM0_CH3		27
#define DMAMUX_SOURCE_FTM0_CH4		28
#define DMAMUX_SOURCE_FTM0_CH5		29
#define DMAMUX_SOURCE_FTM0_CH6		30
#define DMAMUX_SOURCE_FTM0_CH7		31
#define DMAMUX_SOURCE_FTM1_CH0		32
#define DMAMUX_SOURCE_FTM1_CH1		33
#define DMAMUX_SOURCE_FTM2_CH0		34
#define DMAMUX_SOURCE_FTM2_CH1		35
#define DMAMUX_SOURCE_ADC0		40
#define DMAMUX_SOURCE_ADC1		41
#define DMAMUX_SOURCE_CMP0		42
#define DMAMUX_SOURCE_CMP1		43
#define DMAMUX_SOURCE_CMP2		44
#define DMAMUX_SOURCE_DAC0		45
#define DMAMUX_SOURCE_CMT		47
#define DMAMUX_SOURCE_PDB		48
#define DMAMUX_SOURCE_PORTA		49
#define DMAMUX_SOURCE_PORTB		50
#define DMAMUX_SOURCE_PORTC		51
#define DMAMUX_SOURCE_PORTD		52
#define DMAMUX_SOURCE_PORTE		53
#define DMAMUX_SOURCE_ALWAYS0		54
#define DMAMUX_SOURCE_ALWAYS1		55
#define DMAMUX_SOURCE_ALWAYS2		56
#define DMAMUX_SOURCE_ALWAYS3		57
#define DMAMUX_SOURCE_ALWAYS4		58
#define DMAMUX_SOURCE_ALWAYS5		59
#define DMAMUX_SOURCE_ALWAYS6		60
#define DMAMUX_SOURCE_ALWAYS7		61
#define DMAMUX_SOURCE_ALWAYS8		62
#define DMAMUX_SOURCE_ALWAYS9		63

// Chapter 21: Direct Memory Access Controller (eDMA)
#define DMA_CR			*(volatile uint32_t *)0x40008000 // Control Register
#define DMA_CR_CX			((uint32_t)(1<<17))	// Cancel Transfer
#define DMA_CR_ECX			((uint32_t)(1<<16))	// Error Cancel Transfer
#define DMA_CR_EMLM			((uint32_t)0x80)	// Enable Minor Loop Mapping
#define DMA_CR_CLM			((uint32_t)0x40)	// Continuous Link Mode
#define DMA_CR_HALT			((uint32_t)0x20)	// Halt DMA Operations
#define DMA_CR_HOE			((uint32_t)0x10)	// Halt On Error
#define DMA_CR_ERCA			((uint32_t)0x04)	// Enable Round Robin Channel Arbitration
#define DMA_CR_EDBG			((uint32_t)0x02)	// Enable Debug
#define DMA_ES			*(volatile uint32_t *)0x40008004 // Error Status Register
#define DMA_ERQ			*(volatile uint32_t *)0x4000800C // Enable Request Register
#define DMA_ERQ_ERQ0			((uint32_t)1<<0)	// Enable DMA Request 0
#define DMA_ERQ_ERQ1			((uint32_t)1<<1)	// Enable DMA Request 1
#define DMA_ERQ_ERQ2			((uint32_t)1<<2)	// Enable DMA Request 2
#define DMA_ERQ_ERQ3			((uint32_t)1<<3)	// Enable DMA Request 3
#define DMA_EEI			*(volatile uint32_t *)0x40008014 // Enable Error Interrupt Register
#define DMA_EEI_EEI0			((uint32_t)1<<0)	// Enable Error Interrupt 0
#define DMA_EEI_EEI1			((uint32_t)1<<1)	// Enable Error Interrupt 1
#define DMA_EEI_EEI2			((uint32_t)1<<2)	// Enable Error Interrupt 2
#define DMA_EEI_EEI3			((uint32_t)1<<3)	// Enable Error Interrupt 3
#define DMA_CEEI		*(volatile uint8_t  *)0x40008018 // Clear Enable Error Interrupt Register
#define DMA_CEEI_CEEI(n)		((uint8_t)(n & 3)<<0)	// Clear Enable Error Interrupt
#define DMA_CEEI_CAEE			((uint8_t)1<<6)		// Clear All Enable Error Interrupts
#define DMA_CEEI_NOP			((uint8_t)1<<7)		// NOP
#define DMA_SEEI		*(volatile uint8_t  *)0x40008019 // Set Enable Error Interrupt Register
#define DMA_SEEI_SEEI(n)		((uint8_t)(n & 3)<<0)	// Set Enable Error Interrupt
#define DMA_SEEI_SAEE			((uint8_t)1<<6)		// Set All Enable Error Interrupts
#define DMA_SEEI_NOP			((uint8_t)1<<7)		// NOP
#define DMA_CERQ		*(volatile uint8_t  *)0x4000801A // Clear Enable Request Register
#define DMA_CERQ_CERQ(n)		((uint8_t)(n & 3)<<0)	// Clear Enable Request
#define DMA_CERQ_CAER			((uint8_t)1<<6)		// Clear All Enable Requests
#define DMA_CERQ_NOP			((uint8_t)1<<7)		// NOP
#define DMA_SERQ		*(volatile uint8_t  *)0x4000801B // Set Enable Request Register
#define DMA_SERQ_SERQ(n)		((uint8_t)(n & 3)<<0)	// Set Enable Request
#define DMA_SERQ_SAER			((uint8_t)1<<6)		// Set All Enable Requests
#define DMA_SERQ_NOP			((uint8_t)1<<7)		// NOP
#define DMA_CDNE		*(volatile uint8_t  *)0x4000801C // Clear DONE Status Bit Register
#define DMA_CDNE_CDNE(n)		((uint8_t)(n & 3)<<0)	// Clear Done Bit
#define DMA_CDNE_CADN			((uint8_t)1<<6)		// Clear All Done Bits
#define DMA_CDNE_NOP			((uint8_t)1<<7)		// NOP
#define DMA_SSRT		*(volatile uint8_t  *)0x4000801D // Set START Bit Register
#define DMA_SSRT_SSRT(n)		((uint8_t)(n & 3)<<0)	// Set Start Bit
#define DMA_SSRT_SAST			((uint8_t)1<<6)		// Set All Start Bits
#define DMA_SSRT_NOP			((uint8_t)1<<7)		// NOP
#define DMA_CERR		*(volatile uint8_t  *)0x4000801E // Clear Error Register
#define DMA_CERR_CERR(n)		((uint8_t)(n & 3)<<0)	// Clear Error Indicator
#define DMA_CERR_CAEI			((uint8_t)1<<6)		// Clear All Error Indicators
#define DMA_CERR_NOP			((uint8_t)1<<7)		// NOP
#define DMA_CINT		*(volatile uint8_t  *)0x4000801F // Clear Interrupt Request Register
#define DMA_CINT_CINT(n)		((uint8_t)(n & 3)<<0)	// Clear Interrupt Request
#define DMA_CINT_CAIR			((uint8_t)1<<6)		// Clear All Interrupt Requests
#define DMA_CINT_NOP			((uint8_t)1<<7)		// NOP
#define DMA_INT			*(volatile uint32_t *)0x40008024 // Interrupt Request Register
#define DMA_INT_INT0			((uint32_t)1<<0)	// Interrupt Request 0
#define DMA_INT_INT1			((uint32_t)1<<1)	// Interrupt Request 1
#define DMA_INT_INT2			((uint32_t)1<<2)	// Interrupt Request 2
#define DMA_INT_INT3			((uint32_t)1<<3)	// Interrupt Request 3
#define DMA_ERR			*(volatile uint32_t *)0x4000802C // Error Register
#define DMA_ERR_ERR0			((uint32_t)1<<0)	// Error in Channel 0
#define DMA_ERR_ERR1			((uint32_t)1<<1)	// Error in Channel 1
#define DMA_ERR_ERR2			((uint32_t)1<<2)	// Error in Channel 2
#define DMA_ERR_ERR3			((uint32_t)1<<3)	// Error in Channel 3
#define DMA_HRS			*(volatile uint32_t *)0x40008034 // Hardware Request Status Register
#define DMA_HRS_HRS0			((uint32_t)1<<0)	// Hardware Request Status Channel 0
#define DMA_HRS_HRS1			((uint32_t)1<<1)	// Hardware Request Status Channel 1
#define DMA_HRS_HRS2			((uint32_t)1<<2)	// Hardware Request Status Channel 2
#define DMA_HRS_HRS3			((uint32_t)1<<3)	// Hardware Request Status Channel 3
#define DMA_DCHPRI3		*(volatile uint8_t  *)0x40008100 // Channel n Priority Register
#define DMA_DCHPRI2		*(volatile uint8_t  *)0x40008101 // Channel n Priority Register
#define DMA_DCHPRI1		*(volatile uint8_t  *)0x40008102 // Channel n Priority Register
#define DMA_DCHPRI0		*(volatile uint8_t  *)0x40008103 // Channel n Priority Register
#define DMA_DCHPRI_CHPRI(n)		((uint8_t)(n & 3)<<0)	// Channel Arbitration Priority
#define DMA_DCHPRI_DPA			((uint8_t)1<<6)		// Disable PreEmpt Ability
#define DMA_DCHPRI_ECP			((uint8_t)1<<7)		// Enable PreEmption


#define DMA_TCD_ATTR_SMOD(n)		(((n) & 0x1F) << 11)
#define DMA_TCD_ATTR_SSIZE(n)		(((n) & 0x7) << 8)
#define DMA_TCD_ATTR_DMOD(n)		(((n) & 0x1F) << 3)
#define DMA_TCD_ATTR_DSIZE(n)		(((n) & 0x7) << 0)
#define DMA_TCD_ATTR_SIZE_8BIT		0
#define DMA_TCD_ATTR_SIZE_16BIT		1
#define DMA_TCD_ATTR_SIZE_32BIT		2
#define DMA_TCD_ATTR_SIZE_16BYTE	4
#define DMA_TCD_ATTR_SIZE_32BYTE	5
#define DMA_TCD_CSR_BWC(n)		(((n) & 0x3) << 14)
#define DMA_TCD_CSR_MAJORLINKCH(n)	(((n) & 0x3) << 8)
#define DMA_TCD_CSR_DONE		0x0080
#define DMA_TCD_CSR_ACTIVE		0x0040
#define DMA_TCD_CSR_MAJORELINK		0x0020
#define DMA_TCD_CSR_ESG			0x0010
#define DMA_TCD_CSR_DREQ		0x0008
#define DMA_TCD_CSR_INTHALF		0x0004
#define DMA_TCD_CSR_INTMAJOR		0x0002
#define DMA_TCD_CSR_START		0x0001
#define DMA_TCD_CITER_MASK		    ((uint16_t)0x7FFF)	   // Loop count mask
#define DMA_TCD_CITER_ELINK		    ((uint16_t)1<<15)	   // Enable channel linking on minor-loop complete
#define DMA_TCD_BITER_MASK		    ((uint16_t)0x7FFF)	   // Loop count mask
#define DMA_TCD_BITER_ELINK		    ((uint16_t)1<<15)	   // Enable channel linking on minor-loop complete
#define DMA_TCD_NBYTES_SMLOE		    ((uint32_t)1<<31)		    // Source Minor Loop Offset Enable
#define DMA_TCD_NBYTES_DMLOE		    ((uint32_t)1<<30)		    // Destination Minor Loop Offset Enable
#define DMA_TCD_NBYTES_MLOFFNO_NBYTES(n)    ((uint32_t)(n))		    // NBytes transfer count when minor loop disabled
#define DMA_TCD_NBYTES_MLOFFYES_NBYTES(n)   ((uint32_t)(n & 0x1F))	    // NBytes transfer count when minor loop enabled
#define DMA_TCD_NBYTES_MLOFFYES_MLOFF(n)    ((uint32_t)(n & 0xFFFFF)<<10)   // Offset 

#define DMA_TCD0_SADDR		*(volatile const void * volatile *)0x40009000 // TCD Source Address
#define DMA_TCD0_SOFF		*(volatile int16_t *)0x40009004	 // TCD Signed Source Address Offset
#define DMA_TCD0_ATTR		*(volatile uint16_t *)0x40009006 // TCD Transfer Attributes
#define DMA_TCD0_NBYTES_MLNO	*(volatile uint32_t *)0x40009008 // TCD Minor Byte Count (Minor Loop Disabled)
#define DMA_TCD0_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
#define DMA_TCD0_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
#define DMA_TCD0_SLAST		*(volatile int32_t *)0x4000900C	 // TCD Last Source Address Adjustment
#define DMA_TCD0_DADDR		*(volatile void * volatile *)0x40009010 // TCD Destination Address
#define DMA_TCD0_DOFF		*(volatile int16_t *)0x40009014	 // TCD Signed Destination Address Offset
#define DMA_TCD0_CITER_ELINKYES *(volatile uint16_t *)0x40009016 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD0_CITER_ELINKNO	*(volatile uint16_t *)0x40009016 // ??
#define DMA_TCD0_DLASTSGA	*(volatile int32_t *)0x40009018	 // TCD Last Destination Address Adjustment/Scatter Gather Address
#define DMA_TCD0_CSR		*(volatile uint16_t *)0x4000901C // TCD Control and Status
#define DMA_TCD0_BITER_ELINKYES *(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD0_BITER_ELINKNO	*(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled

#define DMA_TCD1_SADDR		*(volatile const void * volatile *)0x40009020 // TCD Source Address
#define DMA_TCD1_SOFF		*(volatile int16_t *)0x40009024	 // TCD Signed Source Address Offset
#define DMA_TCD1_ATTR		*(volatile uint16_t *)0x40009026 // TCD Transfer Attributes
#define DMA_TCD1_NBYTES_MLNO	*(volatile uint32_t *)0x40009028 // TCD Minor Byte Count, Minor Loop Disabled
#define DMA_TCD1_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
#define DMA_TCD1_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
#define DMA_TCD1_SLAST		*(volatile int32_t *)0x4000902C	 // TCD Last Source Address Adjustment
#define DMA_TCD1_DADDR		*(volatile void * volatile *)0x40009030 // TCD Destination Address
#define DMA_TCD1_DOFF		*(volatile int16_t *)0x40009034	 // TCD Signed Destination Address Offset
#define DMA_TCD1_CITER_ELINKYES *(volatile uint16_t *)0x40009036 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD1_CITER_ELINKNO	*(volatile uint16_t *)0x40009036 // ??
#define DMA_TCD1_DLASTSGA	*(volatile int32_t *)0x40009038	 // TCD Last Destination Address Adjustment/Scatter Gather Address
#define DMA_TCD1_CSR		*(volatile uint16_t *)0x4000903C // TCD Control and Status
#define DMA_TCD1_BITER_ELINKYES *(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count Channel Linking Enabled
#define DMA_TCD1_BITER_ELINKNO	*(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled

#define DMA_TCD2_SADDR		*(volatile const void * volatile *)0x40009040 // TCD Source Address
#define DMA_TCD2_SOFF		*(volatile int16_t *)0x40009044	 // TCD Signed Source Address Offset
#define DMA_TCD2_ATTR		*(volatile uint16_t *)0x40009046 // TCD Transfer Attributes
#define DMA_TCD2_NBYTES_MLNO	*(volatile uint32_t *)0x40009048 // TCD Minor Byte Count, Minor Loop Disabled
#define DMA_TCD2_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
#define DMA_TCD2_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
#define DMA_TCD2_SLAST		*(volatile int32_t *)0x4000904C	 // TCD Last Source Address Adjustment
#define DMA_TCD2_DADDR		*(volatile void * volatile *)0x40009050 // TCD Destination Address
#define DMA_TCD2_DOFF		*(volatile int16_t *)0x40009054	 // TCD Signed Destination Address Offset
#define DMA_TCD2_CITER_ELINKYES *(volatile uint16_t *)0x40009056 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD2_CITER_ELINKNO	*(volatile uint16_t *)0x40009056 // ??
#define DMA_TCD2_DLASTSGA	*(volatile int32_t *)0x40009058	 // TCD Last Destination Address Adjustment/Scatter Gather Address
#define DMA_TCD2_CSR		*(volatile uint16_t *)0x4000905C // TCD Control and Status
#define DMA_TCD2_BITER_ELINKYES *(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD2_BITER_ELINKNO	*(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled

#define DMA_TCD3_SADDR		*(volatile const void * volatile *)0x40009060 // TCD Source Address
#define DMA_TCD3_SOFF		*(volatile int16_t *)0x40009064	 // TCD Signed Source Address Offset
#define DMA_TCD3_ATTR		*(volatile uint16_t *)0x40009066 // TCD Transfer Attributes
#define DMA_TCD3_NBYTES_MLNO	*(volatile uint32_t *)0x40009068 // TCD Minor Byte Count, Minor Loop Disabled
#define DMA_TCD3_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
#define DMA_TCD3_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
#define DMA_TCD3_SLAST		*(volatile int32_t *)0x4000906C	 // TCD Last Source Address Adjustment
#define DMA_TCD3_DADDR		*(volatile void * volatile *)0x40009070 // TCD Destination Address
#define DMA_TCD3_DOFF		*(volatile int16_t *)0x40009074	 // TCD Signed Destination Address Offset
#define DMA_TCD3_CITER_ELINKYES *(volatile uint16_t *)0x40009076 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
#define DMA_TCD3_CITER_ELINKNO	*(volatile uint16_t *)0x40009076 // ??
#define DMA_TCD3_DLASTSGA	*(volatile int32_t *)0x40009078	 // TCD Last Destination Address Adjustment/Scatter Gather Address
#define DMA_TCD3_CSR		*(volatile uint16_t *)0x4000907C // TCD Control and Status
#define DMA_TCD3_BITER_ELINKYES *(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Enabled
#define DMA_TCD3_BITER_ELINKNO	*(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Disabled

#define DMA_TCD4_SADDR		*(volatile const void * volatile *)0x40009080 // TCD Source Addr
#define DMA_TCD4_SOFF		*(volatile int16_t *)0x40009084	 // TCD Signed Source Address Offset
#define DMA_TCD4_ATTR		*(volatile uint16_t *)0x40009086 // TCD Transfer Attributes
#define DMA_TCD4_NBYTES_MLNO	*(volatile uint32_t *)0x40009088 // TCD Minor Byte Count
#define DMA_TCD4_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
#define DMA_TCD4_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
#define DMA_TCD4_SLAST		*(volatile int32_t *)0x4000908C	 // TCD Last Source Addr Adj.
#define DMA_TCD4_DADDR		*(volatile void * volatile *)0x40009090 // TCD Destination Address
#define DMA_TCD4_DOFF		*(volatile int16_t *)0x40009094	 // TCD Signed Dest Address Offset
#define DMA_TCD4_CITER_ELINKYES *(volatile uint16_t *)0x40009096 // TCD Current Minor Loop Link
#define DMA_TCD4_CITER_ELINKNO	*(volatile uint16_t *)0x40009096 // ??
#define DMA_TCD4_DLASTSGA	*(volatile int32_t *)0x40009098	 // TCD Last Destination Addr Adj
#define DMA_TCD4_CSR		*(volatile uint16_t *)0x4000909C // TCD Control and Status
#define DMA_TCD4_BITER_ELINKYES *(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link
#define DMA_TCD4_BITER_ELINKNO	*(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link

#define DMA_TCD5_SADDR		*(volatile const void * volatile *)0x400090A0 // TCD Source Addr
#define DMA_TCD5_SOFF		*(volatile int16_t *)0x400090A4	 // TCD Signed Source Address Offset
#define DMA_TCD5_ATTR		*(volatile uint16_t *)0x400090A6 // TCD Transfer Attributes
#define DMA_TCD5_NBYTES_MLNO	*(volatile uint32_t *)0x400090A8 // TCD Minor Byte Count
#define DMA_TCD5_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
#define DMA_TCD5_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
#define DMA_TCD5_SLAST		*(volatile int32_t *)0x400090AC	 // TCD Last Source Addr Adj.
#define DMA_TCD5_DADDR		*(volatile void * volatile *)0x400090B0 // TCD Destination Address
#define DMA_TCD5_DOFF		*(volatile int16_t *)0x400090B4	 // TCD Signed Dest Address Offset
#define DMA_TCD5_CITER_ELINKYES *(volatile uint16_t *)0x400090B6 // TCD Current Minor Loop Link
#define DMA_TCD5_CITER_ELINKNO	*(volatile uint16_t *)0x400090B6 // ??
#define DMA_TCD5_DLASTSGA	*(volatile int32_t *)0x400090B8	 // TCD Last Destination Addr Adj
#define DMA_TCD5_CSR		*(volatile uint16_t *)0x400090BC // TCD Control and Status
#define DMA_TCD5_BITER_ELINKYES *(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link
#define DMA_TCD5_BITER_ELINKNO	*(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link

#define DMA_TCD6_SADDR		*(volatile const void * volatile *)0x400090C0 // TCD Source Addr
#define DMA_TCD6_SOFF		*(volatile int16_t *)0x400090C4	 // TCD Signed Source Address Offset
#define DMA_TCD6_ATTR		*(volatile uint16_t *)0x400090C6 // TCD Transfer Attributes
#define DMA_TCD6_NBYTES_MLNO	*(volatile uint32_t *)0x400090C8 // TCD Minor Byte Count
#define DMA_TCD6_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
#define DMA_TCD6_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
#define DMA_TCD6_SLAST		*(volatile int32_t *)0x400090CC	 // TCD Last Source Addr Adj.
#define DMA_TCD6_DADDR		*(volatile void * volatile *)0x400090D0 // TCD Destination Address
#define DMA_TCD6_DOFF		*(volatile int16_t *)0x400090D4	 // TCD Signed Dest Address Offset
#define DMA_TCD6_CITER_ELINKYES *(volatile uint16_t *)0x400090D6 // TCD Current Minor Loop Link
#define DMA_TCD6_CITER_ELINKNO	*(volatile uint16_t *)0x400090D6 // ??
#define DMA_TCD6_DLASTSGA	*(volatile int32_t *)0x400090D8	 // TCD Last Destination Addr Adj
#define DMA_TCD6_CSR		*(volatile uint16_t *)0x400090DC // TCD Control and Status
#define DMA_TCD6_BITER_ELINKYES *(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link
#define DMA_TCD6_BITER_ELINKNO	*(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link

#define DMA_TCD7_SADDR		*(volatile const void * volatile *)0x400090E0 // TCD Source Addr
#define DMA_TCD7_SOFF		*(volatile int16_t *)0x400090E4	 // TCD Signed Source Address Offset
#define DMA_TCD7_ATTR		*(volatile uint16_t *)0x400090E6 // TCD Transfer Attributes
#define DMA_TCD7_NBYTES_MLNO	*(volatile uint32_t *)0x400090E8 // TCD Minor Byte Count
#define DMA_TCD7_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
#define DMA_TCD7_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
#define DMA_TCD7_SLAST		*(volatile int32_t *)0x400090EC	 // TCD Last Source Addr Adj.
#define DMA_TCD7_DADDR		*(volatile void * volatile *)0x400090F0 // TCD Destination Address
#define DMA_TCD7_DOFF		*(volatile int16_t *)0x400090F4	 // TCD Signed Dest Address Offset
#define DMA_TCD7_CITER_ELINKYES *(volatile uint16_t *)0x400090F6 // TCD Current Minor Loop Link
#define DMA_TCD7_CITER_ELINKNO	*(volatile uint16_t *)0x400090F6 // ??
#define DMA_TCD7_DLASTSGA	*(volatile int32_t *)0x400090F8	 // TCD Last Destination Addr Adj
#define DMA_TCD7_CSR		*(volatile uint16_t *)0x400090FC // TCD Control and Status
#define DMA_TCD7_BITER_ELINKYES *(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link
#define DMA_TCD7_BITER_ELINKNO	*(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link

#define DMA_TCD8_SADDR		*(volatile const void * volatile *)0x40009100 // TCD Source Addr
#define DMA_TCD8_SOFF		*(volatile int16_t *)0x40009104	 // TCD Signed Source Address Offset
#define DMA_TCD8_ATTR		*(volatile uint16_t *)0x40009106 // TCD Transfer Attributes
#define DMA_TCD8_NBYTES_MLNO	*(volatile uint32_t *)0x40009108 // TCD Minor Byte Count
#define DMA_TCD8_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
#define DMA_TCD8_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
#define DMA_TCD8_SLAST		*(volatile int32_t *)0x4000910C	 // TCD Last Source Addr Adj.
#define DMA_TCD8_DADDR		*(volatile void * volatile *)0x40009110 // TCD Destination Address
#define DMA_TCD8_DOFF		*(volatile int16_t *)0x40009114	 // TCD Signed Dest Address Offset
#define DMA_TCD8_CITER_ELINKYES *(volatile uint16_t *)0x40009116 // TCD Current Minor Loop Link
#define DMA_TCD8_CITER_ELINKNO	*(volatile uint16_t *)0x40009116 // ??
#define DMA_TCD8_DLASTSGA	*(volatile int32_t *)0x40009118	 // TCD Last Destination Addr Adj
#define DMA_TCD8_CSR		*(volatile uint16_t *)0x4000911C // TCD Control and Status
#define DMA_TCD8_BITER_ELINKYES *(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link
#define DMA_TCD8_BITER_ELINKNO	*(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link

#define DMA_TCD9_SADDR		*(volatile const void * volatile *)0x40009120 // TCD Source Addr
#define DMA_TCD9_SOFF		*(volatile int16_t *)0x40009124	 // TCD Signed Source Address Offset
#define DMA_TCD9_ATTR		*(volatile uint16_t *)0x40009126 // TCD Transfer Attributes
#define DMA_TCD9_NBYTES_MLNO	*(volatile uint32_t *)0x40009128 // TCD Minor Byte Count
#define DMA_TCD9_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
#define DMA_TCD9_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
#define DMA_TCD9_SLAST		*(volatile int32_t *)0x4000912C	 // TCD Last Source Addr Adj.
#define DMA_TCD9_DADDR		*(volatile void * volatile *)0x40009130 // TCD Destination Address
#define DMA_TCD9_DOFF		*(volatile int16_t *)0x40009134	 // TCD Signed Dest Address Offset
#define DMA_TCD9_CITER_ELINKYES *(volatile uint16_t *)0x40009136 // TCD Current Minor Loop Link
#define DMA_TCD9_CITER_ELINKNO	*(volatile uint16_t *)0x40009136 // ??
#define DMA_TCD9_DLASTSGA	*(volatile int32_t *)0x40009138	 // TCD Last Destination Addr Adj
#define DMA_TCD9_CSR		*(volatile uint16_t *)0x4000913C // TCD Control and Status
#define DMA_TCD9_BITER_ELINKYES *(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link
#define DMA_TCD9_BITER_ELINKNO	*(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link

#define DMA_TCD10_SADDR		*(volatile const void * volatile *)0x40009140 // TCD Source Addr
#define DMA_TCD10_SOFF		*(volatile int16_t *)0x40009144	 // TCD Signed Source Address Offset
#define DMA_TCD10_ATTR		*(volatile uint16_t *)0x40009146 // TCD Transfer Attributes
#define DMA_TCD10_NBYTES_MLNO	*(volatile uint32_t *)0x40009148 // TCD Minor Byte Count
#define DMA_TCD10_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
#define DMA_TCD10_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
#define DMA_TCD10_SLAST		*(volatile int32_t *)0x4000914C	 // TCD Last Source Addr Adj.
#define DMA_TCD10_DADDR		*(volatile void * volatile *)0x40009150 // TCD Destination Address
#define DMA_TCD10_DOFF		*(volatile int16_t *)0x40009154	 // TCD Signed Dest Address Offset
#define DMA_TCD10_CITER_ELINKYES *(volatile uint16_t *)0x40009156 // TCD Current Minor Loop Link
#define DMA_TCD10_CITER_ELINKNO	*(volatile uint16_t *)0x40009156 // ??
#define DMA_TCD10_DLASTSGA	*(volatile int32_t *)0x40009158	 // TCD Last Destination Addr Adj
#define DMA_TCD10_CSR		*(volatile uint16_t *)0x4000915C // TCD Control and Status
#define DMA_TCD10_BITER_ELINKYES *(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link
#define DMA_TCD10_BITER_ELINKNO	*(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link

#define DMA_TCD11_SADDR		*(volatile const void * volatile *)0x40009160 // TCD Source Addr
#define DMA_TCD11_SOFF		*(volatile int16_t *)0x40009164	 // TCD Signed Source Address Offset
#define DMA_TCD11_ATTR		*(volatile uint16_t *)0x40009166 // TCD Transfer Attributes
#define DMA_TCD11_NBYTES_MLNO	*(volatile uint32_t *)0x40009168 // TCD Minor Byte Count
#define DMA_TCD11_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
#define DMA_TCD11_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
#define DMA_TCD11_SLAST		*(volatile int32_t *)0x4000916C	 // TCD Last Source Addr Adj.
#define DMA_TCD11_DADDR		*(volatile void * volatile *)0x40009170 // TCD Destination Address
#define DMA_TCD11_DOFF		*(volatile int16_t *)0x40009174	 // TCD Signed Dest Address Offset
#define DMA_TCD11_CITER_ELINKYES *(volatile uint16_t *)0x40009176 // TCD Current Minor Loop Link
#define DMA_TCD11_CITER_ELINKNO	*(volatile uint16_t *)0x40009176 // ??
#define DMA_TCD11_DLASTSGA	*(volatile int32_t *)0x40009178	 // TCD Last Destination Addr Adj
#define DMA_TCD11_CSR		*(volatile uint16_t *)0x4000917C // TCD Control and Status
#define DMA_TCD11_BITER_ELINKYES *(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link
#define DMA_TCD11_BITER_ELINKNO	*(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link

#define DMA_TCD12_SADDR		*(volatile const void * volatile *)0x40009180 // TCD Source Addr
#define DMA_TCD12_SOFF		*(volatile int16_t *)0x40009184	 // TCD Signed Source Address Offset
#define DMA_TCD12_ATTR		*(volatile uint16_t *)0x40009186 // TCD Transfer Attributes
#define DMA_TCD12_NBYTES_MLNO	*(volatile uint32_t *)0x40009188 // TCD Minor Byte Count
#define DMA_TCD12_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
#define DMA_TCD12_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
#define DMA_TCD12_SLAST		*(volatile int32_t *)0x4000918C	 // TCD Last Source Addr Adj.
#define DMA_TCD12_DADDR		*(volatile void * volatile *)0x40009190 // TCD Destination Address
#define DMA_TCD12_DOFF		*(volatile int16_t *)0x40009194	 // TCD Signed Dest Address Offset
#define DMA_TCD12_CITER_ELINKYES *(volatile uint16_t *)0x40009196 // TCD Current Minor Loop Link
#define DMA_TCD12_CITER_ELINKNO	*(volatile uint16_t *)0x40009196 // ??
#define DMA_TCD12_DLASTSGA	*(volatile int32_t *)0x40009198	 // TCD Last Destination Addr Adj
#define DMA_TCD12_CSR		*(volatile uint16_t *)0x4000919C // TCD Control and Status
#define DMA_TCD12_BITER_ELINKYES *(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link
#define DMA_TCD12_BITER_ELINKNO	*(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link

#define DMA_TCD13_SADDR		*(volatile const void * volatile *)0x400091A0 // TCD Source Addr
#define DMA_TCD13_SOFF		*(volatile int16_t *)0x400091A4	 // TCD Signed Source Address Offset
#define DMA_TCD13_ATTR		*(volatile uint16_t *)0x400091A6 // TCD Transfer Attributes
#define DMA_TCD13_NBYTES_MLNO	*(volatile uint32_t *)0x400091A8 // TCD Minor Byte Count
#define DMA_TCD13_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
#define DMA_TCD13_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
#define DMA_TCD13_SLAST		*(volatile int32_t *)0x400091AC	 // TCD Last Source Addr Adj.
#define DMA_TCD13_DADDR		*(volatile void * volatile *)0x400091B0 // TCD Destination Address
#define DMA_TCD13_DOFF		*(volatile int16_t *)0x400091B4	 // TCD Signed Dest Address Offset
#define DMA_TCD13_CITER_ELINKYES *(volatile uint16_t *)0x400091B6 // TCD Current Minor Loop Link
#define DMA_TCD13_CITER_ELINKNO	*(volatile uint16_t *)0x400091B6 // ??
#define DMA_TCD13_DLASTSGA	*(volatile int32_t *)0x400091B8	 // TCD Last Destination Addr Adj
#define DMA_TCD13_CSR		*(volatile uint16_t *)0x400091BC // TCD Control and Status
#define DMA_TCD13_BITER_ELINKYES *(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link
#define DMA_TCD13_BITER_ELINKNO	*(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link

#define DMA_TCD14_SADDR		*(volatile const void * volatile *)0x400091C0 // TCD Source Addr
#define DMA_TCD14_SOFF		*(volatile int16_t *)0x400091C4	 // TCD Signed Source Address Offset
#define DMA_TCD14_ATTR		*(volatile uint16_t *)0x400091C6 // TCD Transfer Attributes
#define DMA_TCD14_NBYTES_MLNO	*(volatile uint32_t *)0x400091C8 // TCD Minor Byte Count
#define DMA_TCD14_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
#define DMA_TCD14_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
#define DMA_TCD14_SLAST		*(volatile int32_t *)0x400091CC	 // TCD Last Source Addr Adj.
#define DMA_TCD14_DADDR		*(volatile void * volatile *)0x400091D0 // TCD Destination Address
#define DMA_TCD14_DOFF		*(volatile int16_t *)0x400091D4	 // TCD Signed Dest Address Offset
#define DMA_TCD14_CITER_ELINKYES *(volatile uint16_t *)0x400091D6 // TCD Current Minor Loop Link
#define DMA_TCD14_CITER_ELINKNO	*(volatile uint16_t *)0x400091D6 // ??
#define DMA_TCD14_DLASTSGA	*(volatile int32_t *)0x400091D8	 // TCD Last Destination Addr Adj
#define DMA_TCD14_CSR		*(volatile uint16_t *)0x400091DC // TCD Control and Status
#define DMA_TCD14_BITER_ELINKYES *(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link
#define DMA_TCD14_BITER_ELINKNO	*(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link

#define DMA_TCD15_SADDR		*(volatile const void * volatile *)0x400091E0 // TCD Source Addr
#define DMA_TCD15_SOFF		*(volatile int16_t *)0x400091E4	 // TCD Signed Source Address Offset
#define DMA_TCD15_ATTR		*(volatile uint16_t *)0x400091E6 // TCD Transfer Attributes
#define DMA_TCD15_NBYTES_MLNO	*(volatile uint32_t *)0x400091E8 // TCD Minor Byte Count
#define DMA_TCD15_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
#define DMA_TCD15_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
#define DMA_TCD15_SLAST		*(volatile int32_t *)0x400091EC	 // TCD Last Source Addr Adj.
#define DMA_TCD15_DADDR		*(volatile void * volatile *)0x400091F0 // TCD Destination Address
#define DMA_TCD15_DOFF		*(volatile int16_t *)0x400091F4	 // TCD Signed Dest Address Offset
#define DMA_TCD15_CITER_ELINKYES *(volatile uint16_t *)0x400091F6 // TCD Current Minor Loop Link
#define DMA_TCD15_CITER_ELINKNO	*(volatile uint16_t *)0x400091F6 // ??
#define DMA_TCD15_DLASTSGA	*(volatile int32_t *)0x400091F8	 // TCD Last Destination Addr Adj
#define DMA_TCD15_CSR		*(volatile uint16_t *)0x400091FC // TCD Control and Status
#define DMA_TCD15_BITER_ELINKYES *(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link
#define DMA_TCD15_BITER_ELINKNO	*(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link


// Chapter 22: External Watchdog Monitor (EWM)
#define EWM_CTRL		*(volatile uint8_t  *)0x40061000 // Control Register
#define EWM_SERV		*(volatile uint8_t  *)0x40061001 // Service Register
#define EWM_CMPL		*(volatile uint8_t  *)0x40061002 // Compare Low Register
#define EWM_CMPH		*(volatile uint8_t  *)0x40061003 // Compare High Register

// Chapter 23: Watchdog Timer (WDOG)
#define WDOG_STCTRLH		*(volatile uint16_t *)0x40052000 // Watchdog Status and Control Register High
#define WDOG_STCTRLH_DISTESTWDOG	(uint16_t)0x4000		// Allows the WDOG's functional test mode to be disabled permanently.
#define WDOG_STCTRLH_BYTESEL(n)		(uint16_t)(((n) & 3) << 12)	// selects the byte to be tested when the watchdog is in the byte test mode.
#define WDOG_STCTRLH_TESTSEL		(uint16_t)0x0800
#define WDOG_STCTRLH_TESTWDOG		(uint16_t)0x0400
#define WDOG_STCTRLH_WAITEN		(uint16_t)0x0080
#define WDOG_STCTRLH_STOPEN		(uint16_t)0x0040
#define WDOG_STCTRLH_DBGEN		(uint16_t)0x0020
#define WDOG_STCTRLH_ALLOWUPDATE	(uint16_t)0x0010
#define WDOG_STCTRLH_WINEN		(uint16_t)0x0008
#define WDOG_STCTRLH_IRQRSTEN		(uint16_t)0x0004
#define WDOG_STCTRLH_CLKSRC		(uint16_t)0x0002
#define WDOG_STCTRLH_WDOGEN		(uint16_t)0x0001
#define WDOG_STCTRLL		*(volatile uint16_t *)0x40052002 // Watchdog Status and Control Register Low
#define WDOG_TOVALH		*(volatile uint16_t *)0x40052004 // Watchdog Time-out Value Register High
#define WDOG_TOVALL		*(volatile uint16_t *)0x40052006 // Watchdog Time-out Value Register Low
#define WDOG_WINH		*(volatile uint16_t *)0x40052008 // Watchdog Window Register High
#define WDOG_WINL		*(volatile uint16_t *)0x4005200A // Watchdog Window Register Low
#define WDOG_REFRESH		*(volatile uint16_t *)0x4005200C // Watchdog Refresh register
#define WDOG_UNLOCK		*(volatile uint16_t *)0x4005200E // Watchdog Unlock register
#define WDOG_UNLOCK_SEQ1		(uint16_t)0xC520
#define WDOG_UNLOCK_SEQ2		(uint16_t)0xD928
#define WDOG_TMROUTH		*(volatile uint16_t *)0x40052010 // Watchdog Timer Output Register High
#define WDOG_TMROUTL		*(volatile uint16_t *)0x40052012 // Watchdog Timer Output Register Low
#define WDOG_RSTCNT		*(volatile uint16_t *)0x40052014 // Watchdog Reset Count register
#define WDOG_PRESC		*(volatile uint16_t *)0x40052016 // Watchdog Prescaler register

// Chapter 24: Multipurpose Clock Generator (MCG)
#define MCG_C1			*(volatile uint8_t  *)0x40064000 // MCG Control 1 Register
#define MCG_C1_IREFSTEN			(uint8_t)0x01			// Internal Reference Stop Enable, Controls whether or not the internal reference clock remains enabled when the MCG enters Stop mode.
#define MCG_C1_IRCLKEN			(uint8_t)0x02			// Internal Reference Clock Enable, Enables the internal reference clock for use as MCGIRCLK.
#define MCG_C1_IREFS			(uint8_t)0x04			// Internal Reference Select, Selects the reference clock source for the FLL.
#define MCG_C1_FRDIV(n)			(uint8_t)(((n) & 0x07) << 3)	// FLL External Reference Divider, Selects the amount to divide down the external reference clock for the FLL
#define MCG_C1_CLKS(n)			(uint8_t)(((n) & 0x03) << 6)	// Clock Source Select, Selects the clock source for MCGOUTCLK
#define MCG_C2			*(volatile uint8_t  *)0x40064001 // MCG Control 2 Register
#define MCG_C2_IRCS			(uint8_t)0x01			// Internal Reference Clock Select, Selects between the fast or slow internal reference clock source.
#define MCG_C2_LP			(uint8_t)0x02			// Low Power Select, Controls whether the FLL or PLL is disabled in BLPI and BLPE modes.
#define MCG_C2_EREFS			(uint8_t)0x04			// External Reference Select, Selects the source for the external reference clock. 
#define MCG_C2_HGO0			(uint8_t)0x08			// High Gain Oscillator Select, Controls the crystal oscillator mode of operation
#define MCG_C2_RANGE0(n)		(uint8_t)(((n) & 0x03) << 4)	// Frequency Range Select, Selects the frequency range for the crystal oscillator
#define MCG_C2_LOCRE0			(uint8_t)0x80			// Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0 
#define MCG_C3			*(volatile uint8_t  *)0x40064002 // MCG Control 3 Register
#define MCG_C3_SCTRIM(n)		(uint8_t)(n)			// Slow Internal Reference Clock Trim Setting
#define MCG_C4			*(volatile uint8_t  *)0x40064003 // MCG Control 4 Register
#define MCG_C4_SCFTRIM			(uint8_t)0x01			// Slow Internal Reference Clock Fine Trim
#define MCG_C4_FCTRIM(n)		(uint8_t)(((n) & 0x0F) << 1)	// Fast Internal Reference Clock Trim Setting
#define MCG_C4_DRST_DRS(n)		(uint8_t)(((n) & 0x03) << 5)	// DCO Range Select
#define MCG_C4_DMX32			(uint8_t)0x80			// DCO Maximum Frequency with 32.768 kHz Reference, controls whether the DCO frequency range is narrowed
#define MCG_C5			*(volatile uint8_t  *)0x40064004 // MCG Control 5 Register
#define MCG_C5_PRDIV0(n)		(uint8_t)((n) & 0x1F)		// PLL External Reference Divider
#define MCG_C5_PLLSTEN0			(uint8_t)0x20			// PLL Stop Enable
#define MCG_C5_PLLCLKEN0		(uint8_t)0x40			// PLL Clock Enable
#define MCG_C6			*(volatile uint8_t  *)0x40064005 // MCG Control 6 Register
#define MCG_C6_VDIV0(n)			(uint8_t)((n) & 0x1F)		// VCO 0 Divider
#define MCG_C6_CME0			(uint8_t)0x20			// Clock Monitor Enable
#define MCG_C6_PLLS			(uint8_t)0x40			// PLL Select, Controls whether the PLL or FLL output is selected as the MCG source when CLKS[1:0]=00. 
#define MCG_C6_LOLIE0			(uint8_t)0x80			// Loss of Lock Interrrupt Enable
#define MCG_S			*(volatile uint8_t  *)0x40064006 // MCG Status Register
#define MCG_S_IRCST			(uint8_t)0x01			// Internal Reference Clock Status
#define MCG_S_OSCINIT0			(uint8_t)0x02			// OSC Initialization,	resets to 0, is set to 1 after the initialization cycles of the crystal oscillator
#define MCG_S_CLKST(n)			(uint8_t)(((n) & 0x03) << 2)	// Clock Mode Status, 0=FLL is selected, 1= Internal ref, 2=External ref, 3=PLL
#define MCG_S_CLKST_MASK		(uint8_t)0x0C
#define MCG_S_IREFST			(uint8_t)0x10			// Internal Reference Status
#define MCG_S_PLLST			(uint8_t)0x20			// PLL Select Status
#define MCG_S_LOCK0			(uint8_t)0x40			// Lock Status, 0=PLL Unlocked, 1=PLL Locked
#define MCG_S_LOLS0			(uint8_t)0x80			// Loss of Lock Status
#define MCG_SC			*(volatile uint8_t  *)0x40064008 // MCG Status and Control Register
#define MCG_SC_LOCS0			(uint8_t)0x01			// OSC0 Loss of Clock Status
#define MCG_SC_FCRDIV(n)		(uint8_t)(((n) & 0x07) << 1)	// Fast Clock Internal Reference Divider
#define MCG_SC_FLTPRSRV			(uint8_t)0x10			// FLL Filter Preserve Enable
#define MCG_SC_ATMF			(uint8_t)0x20			// Automatic Trim Machine Fail Flag
#define MCG_SC_ATMS			(uint8_t)0x40			// Automatic Trim Machine Select
#define MCG_SC_ATME			(uint8_t)0x80			// Automatic Trim Machine Enable
#define MCG_ATCVH		*(volatile uint8_t  *)0x4006400A // MCG Auto Trim Compare Value High Register
#define MCG_ATCVL		*(volatile uint8_t  *)0x4006400B // MCG Auto Trim Compare Value Low Register
#define MCG_C7			*(volatile uint8_t  *)0x4006400C // MCG Control 7 Register
#define MCG_C8			*(volatile uint8_t  *)0x4006400D // MCG Control 8 Register

// Chapter 25: Oscillator (OSC)
#define OSC0_CR			*(volatile uint8_t  *)0x40065000 // OSC Control Register
#define OSC_SC16P			(uint8_t)0x01			// Oscillator 16 pF Capacitor Load Configure
#define OSC_SC8P			(uint8_t)0x02			// Oscillator 8 pF Capacitor Load Configure
#define OSC_SC4P			(uint8_t)0x04			// Oscillator 4 pF Capacitor Load Configure
#define OSC_SC2P			(uint8_t)0x08			// Oscillator 2 pF Capacitor Load Configure
#define OSC_EREFSTEN			(uint8_t)0x20			// External Reference Stop Enable, Controls whether or not the external reference clock (OSCERCLK) remains enabled when MCU enters Stop mode.
#define OSC_ERCLKEN			(uint8_t)0x80			// External Reference Enable, Enables external reference clock (OSCERCLK).

// Chapter 27: Flash Memory Controller (FMC)
#define FMC_PFAPR		*(volatile uint32_t *)0x4001F000	// Flash Access Protection
#define FMC_PFB0CR		*(volatile uint32_t *)0x4001F004	// Flash Control
#define FMC_TAGVDW0S0		*(volatile uint32_t *)0x4001F100	// Cache Tag Storage
#define FMC_TAGVDW0S1		*(volatile uint32_t *)0x4001F104	// Cache Tag Storage
#define FMC_TAGVDW1S0		*(volatile uint32_t *)0x4001F108	// Cache Tag Storage
#define FMC_TAGVDW1S1		*(volatile uint32_t *)0x4001F10C	// Cache Tag Storage
#define FMC_TAGVDW2S0		*(volatile uint32_t *)0x4001F110	// Cache Tag Storage
#define FMC_TAGVDW2S1		*(volatile uint32_t *)0x4001F114	// Cache Tag Storage
#define FMC_TAGVDW3S0		*(volatile uint32_t *)0x4001F118	// Cache Tag Storage
#define FMC_TAGVDW3S1		*(volatile uint32_t *)0x4001F11C	// Cache Tag Storage
#define FMC_DATAW0S0		*(volatile uint32_t *)0x4001F200	// Cache Data Storage
#define FMC_DATAW0S1		*(volatile uint32_t *)0x4001F204	// Cache Data Storage
#define FMC_DATAW1S0		*(volatile uint32_t *)0x4001F208	// Cache Data Storage
#define FMC_DATAW1S1		*(volatile uint32_t *)0x4001F20C	// Cache Data Storage
#define FMC_DATAW2S0		*(volatile uint32_t *)0x4001F210	// Cache Data Storage
#define FMC_DATAW2S1		*(volatile uint32_t *)0x4001F214	// Cache Data Storage
#define FMC_DATAW3S0		*(volatile uint32_t *)0x4001F218	// Cache Data Storage
#define FMC_DATAW3S1		*(volatile uint32_t *)0x4001F21C	// Cache Data Storage

// Chapter 28: Flash Memory Module (FTFL)
#define FTFL_FSTAT		*(volatile uint8_t  *)0x40020000      // Flash Status Register
#define FTFL_FSTAT_CCIF			(uint8_t)0x80			// Command Complete Interrupt Flag
#define FTFL_FSTAT_RDCOLERR		(uint8_t)0x40			// Flash Read Collision Error Flag
#define FTFL_FSTAT_ACCERR		(uint8_t)0x20			// Flash Access Error Flag
#define FTFL_FSTAT_FPVIOL		(uint8_t)0x10			// Flash Protection Violation Flag
#define FTFL_FSTAT_MGSTAT0		(uint8_t)0x01			// Memory Controller Command Completion Status Flag
#define FTFL_FCNFG		*(volatile uint8_t  *)0x40020001      // Flash Configuration Register
#define FTFL_FCNFG_CCIE			(uint8_t)0x80			// Command Complete Interrupt Enable
#define FTFL_FCNFG_RDCOLLIE		(uint8_t)0x40			// Read Collision Error Interrupt Enable
#define FTFL_FCNFG_ERSAREQ		(uint8_t)0x20			// Erase All Request
#define FTFL_FCNFG_ERSSUSP		(uint8_t)0x10			// Erase Suspend
#define FTFL_FCNFG_PFLSH		(uint8_t)0x04			// Flash memory configuration
#define FTFL_FCNFG_RAMRDY		(uint8_t)0x02			// RAM Ready
#define FTFL_FCNFG_EEERDY		(uint8_t)0x01			// EEPROM Ready
#define FTFL_FSEC		*(const	   uint8_t  *)0x40020002      // Flash Security Register
#define FTFL_FOPT		*(const	   uint8_t  *)0x40020003      // Flash Option Register
#define FTFL_FCCOB3		*(volatile uint8_t  *)0x40020004      // Flash Common Command Object Registers
#define FTFL_FCCOB2		*(volatile uint8_t  *)0x40020005
#define FTFL_FCCOB1		*(volatile uint8_t  *)0x40020006
#define FTFL_FCCOB0		*(volatile uint8_t  *)0x40020007
#define FTFL_FCCOB7		*(volatile uint8_t  *)0x40020008
#define FTFL_FCCOB6		*(volatile uint8_t  *)0x40020009
#define FTFL_FCCOB5		*(volatile uint8_t  *)0x4002000A
#define FTFL_FCCOB4		*(volatile uint8_t  *)0x4002000B
#define FTFL_FCCOBB		*(volatile uint8_t  *)0x4002000C
#define FTFL_FCCOBA		*(volatile uint8_t  *)0x4002000D
#define FTFL_FCCOB9		*(volatile uint8_t  *)0x4002000E
#define FTFL_FCCOB8		*(volatile uint8_t  *)0x4002000F
#define FTFL_FPROT3		*(volatile uint8_t  *)0x40020010      // Program Flash Protection Registers
#define FTFL_FPROT2		*(volatile uint8_t  *)0x40020011      // Program Flash Protection Registers
#define FTFL_FPROT1		*(volatile uint8_t  *)0x40020012      // Program Flash Protection Registers
#define FTFL_FPROT0		*(volatile uint8_t  *)0x40020013      // Program Flash Protection Registers
#define FTFL_FEPROT		*(volatile uint8_t  *)0x40020016      // EEPROM Protection Register
#define FTFL_FDPROT		*(volatile uint8_t  *)0x40020017      // Data Flash Protection Register

// Chapter 30: Cyclic Redundancy Check (CRC)
#define CRC_CRC			*(volatile uint32_t *)0x40032000 // CRC Data register
#define CRC_GPOLY		*(volatile uint32_t *)0x40032004 // CRC Polynomial register
#define CRC_CTRL		*(volatile uint32_t *)0x40032008 // CRC Control register

// Chapter 31: Analog-to-Digital Converter (ADC)
#define ADC0_SC1A		*(volatile uint32_t *)0x4003B000 // ADC status and control registers 1
#define ADC0_SC1B		*(volatile uint32_t *)0x4003B004 // ADC status and control registers 1
#define ADC_SC1_COCO			(uint32_t)0x80			// Conversion complete flag
#define ADC_SC1_AIEN			(uint32_t)0x40			// Interrupt enable
#define ADC_SC1_DIFF			(uint32_t)0x20			// Differential mode enable
#define ADC_SC1_ADCH(n)			(uint32_t)((n) & 0x1F)		// Input channel select
#define ADC0_CFG1		*(volatile uint32_t *)0x4003B008 // ADC configuration register 1
#define ADC_CFG1_ADLPC			(uint32_t)0x80			// Low-power configuration
#define ADC_CFG1_ADIV(n)		(uint32_t)(((n) & 3) << 5)	// Clock divide select, 0=direct, 1=div2, 2=div4, 3=div8
#define ADC_CFG1_ADLSMP			(uint32_t)0x10			// Sample time configuration, 0=Short, 1=Long
#define ADC_CFG1_MODE(n)		(uint32_t)(((n) & 3) << 2)	// Conversion mode, 0=8 bit, 1=12 bit, 2=10 bit, 3=16 bit
#define ADC_CFG1_ADICLK(n)		(uint32_t)(((n) & 3) << 0)	// Input clock, 0=bus, 1=bus/2, 2=OSCERCLK, 3=async
#define ADC0_CFG2		*(volatile uint32_t *)0x4003B00C // Configuration register 2
#define ADC_CFG2_MUXSEL			(uint32_t)0x10			// 0=a channels, 1=b channels
#define ADC_CFG2_ADACKEN		(uint32_t)0x08			// async clock enable
#define ADC_CFG2_ADHSC			(uint32_t)0x04			// High speed configuration
#define ADC_CFG2_ADLSTS(n)		(uint32_t)(((n) & 3) << 0)	// Sample time, 0=24 cycles, 1=12 cycles, 2=6 cycles, 3=2 cycles
#define ADC0_RA			*(volatile uint32_t *)0x4003B010 // ADC data result register
#define ADC0_RB			*(volatile uint32_t *)0x4003B014 // ADC data result register
#define ADC0_CV1		*(volatile uint32_t *)0x4003B018 // Compare value registers
#define ADC0_CV2		*(volatile uint32_t *)0x4003B01C // Compare value registers
#define ADC0_SC2		*(volatile uint32_t *)0x4003B020 // Status and control register 2
#define ADC_SC2_ADACT			(uint32_t)0x80			// Conversion active
#define ADC_SC2_ADTRG			(uint32_t)0x40			// Conversion trigger select, 0=software, 1=hardware
#define ADC_SC2_ACFE			(uint32_t)0x20			// Compare function enable
#define ADC_SC2_ACFGT			(uint32_t)0x10			// Compare function greater than enable
#define ADC_SC2_ACREN			(uint32_t)0x08			// Compare function range enable
#define ADC_SC2_DMAEN			(uint32_t)0x04			// DMA enable
#define ADC_SC2_REFSEL(n)		(uint32_t)(((n) & 3) << 0)	// Voltage reference, 0=vcc/external, 1=1.2 volts
#define ADC0_SC3		*(volatile uint32_t *)0x4003B024 // Status and control register 3
#define ADC_SC3_CAL			(uint32_t)0x80			// Calibration, 1=begin, stays set while cal in progress
#define ADC_SC3_CALF			(uint32_t)0x40			// Calibration failed flag
#define ADC_SC3_ADCO			(uint32_t)0x08			// Continuous conversion enable
#define ADC_SC3_AVGE			(uint32_t)0x04			// Hardware average enable
#define ADC_SC3_AVGS(n)			(uint32_t)(((n) & 3) << 0)	// avg select, 0=4 samples, 1=8 samples, 2=16 samples, 3=32 samples
#define ADC0_OFS		*(volatile uint32_t *)0x4003B028 // ADC offset correction register
#define ADC0_PG			*(volatile uint32_t *)0x4003B02C // ADC plus-side gain register
#define ADC0_MG			*(volatile uint32_t *)0x4003B030 // ADC minus-side gain register
#define ADC0_CLPD		*(volatile uint32_t *)0x4003B034 // ADC plus-side general calibration value register
#define ADC0_CLPS		*(volatile uint32_t *)0x4003B038 // ADC plus-side general calibration value register
#define ADC0_CLP4		*(volatile uint32_t *)0x4003B03C // ADC plus-side general calibration value register
#define ADC0_CLP3		*(volatile uint32_t *)0x4003B040 // ADC plus-side general calibration value register
#define ADC0_CLP2		*(volatile uint32_t *)0x4003B044 // ADC plus-side general calibration value register
#define ADC0_CLP1		*(volatile uint32_t *)0x4003B048 // ADC plus-side general calibration value register
#define ADC0_CLP0		*(volatile uint32_t *)0x4003B04C // ADC plus-side general calibration value register
#define ADC0_PGA		*(volatile uint32_t *)0x4003B050 // ADC Programmable Gain Amplifier
#define ADC0_PGA_PGAEN			(uint32_t)0x00800000		// Enable
#define ADC0_PGA_PGALPB			(uint32_t)0x00100000		// Low-Power Mode Control, 0=low power, 1=normal
#define ADC0_PGA_PGAG(n)		(uint32_t)(((n) & 15) << 16)	// Gain, 0=1X, 1=2X, 2=4X, 3=8X, 4=16X, 5=32X, 6=64X
#define ADC0_CLMD		*(volatile uint32_t *)0x4003B054 // ADC minus-side general calibration value register
#define ADC0_CLMS		*(volatile uint32_t *)0x4003B058 // ADC minus-side general calibration value register
#define ADC0_CLM4		*(volatile uint32_t *)0x4003B05C // ADC minus-side general calibration value register
#define ADC0_CLM3		*(volatile uint32_t *)0x4003B060 // ADC minus-side general calibration value register
#define ADC0_CLM2		*(volatile uint32_t *)0x4003B064 // ADC minus-side general calibration value register
#define ADC0_CLM1		*(volatile uint32_t *)0x4003B068 // ADC minus-side general calibration value register
#define ADC0_CLM0		*(volatile uint32_t *)0x4003B06C // ADC minus-side general calibration value register

#define ADC1_SC1A		*(volatile uint32_t *)0x400BB000 // ADC status and control registers 1
#define ADC1_SC1B		*(volatile uint32_t *)0x400BB004 // ADC status and control registers 1
#define ADC1_CFG1		*(volatile uint32_t *)0x400BB008 // ADC configuration register 1
#define ADC1_CFG2		*(volatile uint32_t *)0x400BB00C // Configuration register 2
#define ADC1_RA			*(volatile uint32_t *)0x400BB010 // ADC data result register
#define ADC1_RB			*(volatile uint32_t *)0x400BB014 // ADC data result register
#define ADC1_CV1		*(volatile uint32_t *)0x400BB018 // Compare value registers
#define ADC1_CV2		*(volatile uint32_t *)0x400BB01C // Compare value registers
#define ADC1_SC2		*(volatile uint32_t *)0x400BB020 // Status and control register 2
#define ADC1_SC3		*(volatile uint32_t *)0x400BB024 // Status and control register 3
#define ADC1_OFS		*(volatile uint32_t *)0x400BB028 // ADC offset correction register
#define ADC1_PG			*(volatile uint32_t *)0x400BB02C // ADC plus-side gain register
#define ADC1_MG			*(volatile uint32_t *)0x400BB030 // ADC minus-side gain register
#define ADC1_CLPD		*(volatile uint32_t *)0x400BB034 // ADC plus-side general calibration value register
#define ADC1_CLPS		*(volatile uint32_t *)0x400BB038 // ADC plus-side general calibration value register
#define ADC1_CLP4		*(volatile uint32_t *)0x400BB03C // ADC plus-side general calibration value register
#define ADC1_CLP3		*(volatile uint32_t *)0x400BB040 // ADC plus-side general calibration value register
#define ADC1_CLP2		*(volatile uint32_t *)0x400BB044 // ADC plus-side general calibration value register
#define ADC1_CLP1		*(volatile uint32_t *)0x400BB048 // ADC plus-side general calibration value register
#define ADC1_CLP0		*(volatile uint32_t *)0x400BB04C // ADC plus-side general calibration value register
#define ADC1_PGA		*(volatile uint32_t *)0x400BB050 // ADC Programmable Gain Amplifier
#define ADC1_CLMD		*(volatile uint32_t *)0x400BB054 // ADC minus-side general calibration value register
#define ADC1_CLMS		*(volatile uint32_t *)0x400BB058 // ADC minus-side general calibration value register
#define ADC1_CLM4		*(volatile uint32_t *)0x400BB05C // ADC minus-side general calibration value register
#define ADC1_CLM3		*(volatile uint32_t *)0x400BB060 // ADC minus-side general calibration value register
#define ADC1_CLM2		*(volatile uint32_t *)0x400BB064 // ADC minus-side general calibration value register
#define ADC1_CLM1		*(volatile uint32_t *)0x400BB068 // ADC minus-side general calibration value register
#define ADC1_CLM0		*(volatile uint32_t *)0x400BB06C // ADC minus-side general calibration value register

#define DAC0_DAT0L		*(volatile uint8_t  *)0x400CC000 // DAC Data Low Register 
#define DAC0_DATH		*(volatile uint8_t  *)0x400CC001 // DAC Data High Register 
#define DAC0_DAT1L		*(volatile uint8_t  *)0x400CC002 // DAC Data Low Register 
#define DAC0_DAT2L		*(volatile uint8_t  *)0x400CC004 // DAC Data Low Register 
#define DAC0_DAT3L		*(volatile uint8_t  *)0x400CC006 // DAC Data Low Register 
#define DAC0_DAT4L		*(volatile uint8_t  *)0x400CC008 // DAC Data Low Register 
#define DAC0_DAT5L		*(volatile uint8_t  *)0x400CC00A // DAC Data Low Register 
#define DAC0_DAT6L		*(volatile uint8_t  *)0x400CC00C // DAC Data Low Register 
#define DAC0_DAT7L		*(volatile uint8_t  *)0x400CC00E // DAC Data Low Register 
#define DAC0_DAT8L		*(volatile uint8_t  *)0x400CC010 // DAC Data Low Register 
#define DAC0_DAT9L		*(volatile uint8_t  *)0x400CC012 // DAC Data Low Register 
#define DAC0_DAT10L		*(volatile uint8_t  *)0x400CC014 // DAC Data Low Register 
#define DAC0_DAT11L		*(volatile uint8_t  *)0x400CC016 // DAC Data Low Register 
#define DAC0_DAT12L		*(volatile uint8_t  *)0x400CC018 // DAC Data Low Register 
#define DAC0_DAT13L		*(volatile uint8_t  *)0x400CC01A // DAC Data Low Register 
#define DAC0_DAT14L		*(volatile uint8_t  *)0x400CC01C // DAC Data Low Register 
#define DAC0_DAT15L		*(volatile uint8_t  *)0x400CC01E // DAC Data Low Register 
#define DAC0_SR			*(volatile uint8_t  *)0x400CC020 // DAC Status Register 
#define DAC0_C0			*(volatile uint8_t  *)0x400CC021 // DAC Control Register 
#define DAC_C0_DACEN			0x80				// DAC Enable
#define DAC_C0_DACRFS			0x40				// DAC Reference Select
#define DAC_C0_DACTRGSEL		0x20				// DAC Trigger Select
#define DAC_C0_DACSWTRG			0x10				// DAC Software Trigger
#define DAC_C0_LPEN			0x08				// DAC Low Power Control
#define DAC_C0_DACBWIEN			0x04				// DAC Buffer Watermark Interrupt Enable
#define DAC_C0_DACBTIEN			0x02				// DAC Buffer Read Pointer Top Flag Interrupt Enable
#define DAC_C0_DACBBIEN			0x01				// DAC Buffer Read Pointer Bottom Flag Interrupt Enable
#define DAC0_C1			*(volatile uint8_t  *)0x400CC022 // DAC Control Register 1 
#define DAC_C1_DMAEN			0x80				// DMA Enable Select
#define DAC_C1_DACBFWM(n)		(((n) & 3) << 3)		// DAC Buffer Watermark Select
#define DAC_C1_DACBFMD(n)		(((n) & 3) << 0)		// DAC Buffer Work Mode Select
#define DAC_C1_DACBFEN			0x00				// DAC Buffer Enable

#define DAC0_C2			*(volatile uint8_t  *)0x400CC023 // DAC Control Register 2 
#define DAC_C2_DACBFRP(n)		(((n) & 15) << 4)		// DAC Buffer Read Pointer
#define DAC_C2_DACBFUP(n)		(((n) & 15) << 0)		// DAC Buffer Upper Limit


//#define MCG_C2_RANGE0(n)		(uint8_t)(((n) & 0x03) << 4)	// Frequency Range Select, Selects the frequency range for the crystal oscillator
//#define MCG_C2_LOCRE0			(uint8_t)0x80			// Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0 

// Chapter 32: Comparator (CMP)
#define CMP0_CR0		*(volatile uint8_t  *)0x40073000 // CMP Control Register 0
#define CMP0_CR1		*(volatile uint8_t  *)0x40073001 // CMP Control Register 1
#define CMP0_FPR		*(volatile uint8_t  *)0x40073002 // CMP Filter Period Register
#define CMP0_SCR		*(volatile uint8_t  *)0x40073003 // CMP Status and Control Register
#define CMP0_DACCR		*(volatile uint8_t  *)0x40073004 // DAC Control Register
#define CMP0_MUXCR		*(volatile uint8_t  *)0x40073005 // MUX Control Register
#define CMP1_CR0		*(volatile uint8_t  *)0x40073008 // CMP Control Register 0
#define CMP1_CR1		*(volatile uint8_t  *)0x40073009 // CMP Control Register 1
#define CMP1_FPR		*(volatile uint8_t  *)0x4007300A // CMP Filter Period Register
#define CMP1_SCR		*(volatile uint8_t  *)0x4007300B // CMP Status and Control Register
#define CMP1_DACCR		*(volatile uint8_t  *)0x4007300C // DAC Control Register
#define CMP1_MUXCR		*(volatile uint8_t  *)0x4007300D // MUX Control Register

// Chapter 33: Voltage Reference (VREFV1)
#define VREF_TRM		*(volatile uint8_t  *)0x40074000 // VREF Trim Register
#define VREF_SC			*(volatile uint8_t  *)0x40074001 // VREF Status and Control Register

// Chapter 34: Programmable Delay Block (PDB)
#define PDB0_SC			*(volatile uint32_t *)0x40036000 // Status and Control Register
#define PDB_SC_LDMOD(n)			(((n) & 3) << 18)	// Load Mode Select
#define PDB_SC_PDBEIE			0x00020000		// Sequence Error Interrupt Enable
#define PDB_SC_SWTRIG			0x00010000		// Software Trigger
#define PDB_SC_DMAEN			0x00008000		// DMA Enable
#define PDB_SC_PRESCALER(n)		(((n) & 7) << 12)	// Prescaler Divider Select
#define PDB_SC_TRGSEL(n)		(((n) & 15) << 8)	// Trigger Input Source Select
#define PDB_SC_PDBEN			0x00000080		// PDB Enable
#define PDB_SC_PDBIF			0x00000040		// PDB Interrupt Flag
#define PDB_SC_PDBIE			0x00000020		// PDB Interrupt Enable.
#define PDB_SC_MULT(n)			(((n) & 3) << 2)	// Multiplication Factor
#define PDB_SC_CONT			0x00000002		// Continuous Mode Enable
#define PDB_SC_LDOK			0x00000001		// Load OK
#define PDB0_MOD		*(volatile uint32_t *)0x40036004 // Modulus Register
#define PDB0_CNT		*(volatile uint32_t *)0x40036008 // Counter Register
#define PDB0_IDLY		*(volatile uint32_t *)0x4003600C // Interrupt Delay Register
#define PDB0_CH0C1		*(volatile uint32_t *)0x40036010 // Channel n Control Register 1
#define PDB0_CH0S		*(volatile uint32_t *)0x40036014 // Channel n Status Register
#define PDB0_CH0DLY0		*(volatile uint32_t *)0x40036018 // Channel n Delay 0 Register
#define PDB0_CH0DLY1		*(volatile uint32_t *)0x4003601C // Channel n Delay 1 Register
#define PDB0_POEN		*(volatile uint32_t *)0x40036190 // Pulse-Out n Enable Register
#define PDB0_PO0DLY		*(volatile uint32_t *)0x40036194 // Pulse-Out n Delay Register
#define PDB0_PO1DLY		*(volatile uint32_t *)0x40036198 // Pulse-Out n Delay Register

// Chapter 35: FlexTimer Module (FTM)
#define FTM0_SC			*(volatile uint32_t *)0x40038000 // Status And Control
#define FTM_SC_TOF			0x80				// Timer Overflow Flag
#define FTM_SC_TOIE			0x40				// Timer Overflow Interrupt Enable
#define FTM_SC_CPWMS			0x20				// Center-Aligned PWM Select
#define FTM_SC_CLKS(n)			(((n) & 3) << 3)		// Clock Source Selection
#define FTM_SC_PS(n)			(((n) & 7) << 0)		// Prescale Factor Selection
#define FTM0_CNT		*(volatile uint32_t *)0x40038004 // Counter
#define FTM0_MOD		*(volatile uint32_t *)0x40038008 // Modulo
#define FTM0_C0SC		*(volatile uint32_t *)0x4003800C // Channel 0 Status And Control
#define FTM0_C0V		*(volatile uint32_t *)0x40038010 // Channel 0 Value
#define FTM0_C1SC		*(volatile uint32_t *)0x40038014 // Channel 1 Status And Control
#define FTM0_C1V		*(volatile uint32_t *)0x40038018 // Channel 1 Value
#define FTM0_C2SC		*(volatile uint32_t *)0x4003801C // Channel 2 Status And Control
#define FTM0_C2V		*(volatile uint32_t *)0x40038020 // Channel 2 Value
#define FTM0_C3SC		*(volatile uint32_t *)0x40038024 // Channel 3 Status And Control
#define FTM0_C3V		*(volatile uint32_t *)0x40038028 // Channel 3 Value
#define FTM0_C4SC		*(volatile uint32_t *)0x4003802C // Channel 4 Status And Control
#define FTM0_C4V		*(volatile uint32_t *)0x40038030 // Channel 4 Value
#define FTM0_C5SC		*(volatile uint32_t *)0x40038034 // Channel 5 Status And Control
#define FTM0_C5V		*(volatile uint32_t *)0x40038038 // Channel 5 Value
#define FTM0_C6SC		*(volatile uint32_t *)0x4003803C // Channel 6 Status And Control
#define FTM0_C6V		*(volatile uint32_t *)0x40038040 // Channel 6 Value
#define FTM0_C7SC		*(volatile uint32_t *)0x40038044 // Channel 7 Status And Control
#define FTM0_C7V		*(volatile uint32_t *)0x40038048 // Channel 7 Value
#define FTM0_CNTIN		*(volatile uint32_t *)0x4003804C // Counter Initial Value
#define FTM0_STATUS		*(volatile uint32_t *)0x40038050 // Capture And Compare Status
#define FTM0_MODE		*(volatile uint32_t *)0x40038054 // Features Mode Selection
#define FTM_MODE_FAULTIE		0x80				// Fault Interrupt Enable
#define FTM_MODE_FAULTM(n)		(((n) & 3) << 5)		// Fault Control Mode
#define FTM_MODE_CAPTEST		0x10				// Capture Test Mode Enable
#define FTM_MODE_PWMSYNC		0x08				// PWM Synchronization Mode
#define FTM_MODE_WPDIS			0x04				// Write Protection Disable
#define FTM_MODE_INIT			0x02				// Initialize The Channels Output
#define FTM_MODE_FTMEN			0x01				// FTM Enable
#define FTM0_SYNC		*(volatile uint32_t *)0x40038058 // Synchronization
#define FTM_SYNC_SWSYNC			0x80				// 
#define FTM_SYNC_TRIG2			0x40				// 
#define FTM_SYNC_TRIG1			0x20				// 
#define FTM_SYNC_TRIG0			0x10				// 
#define FTM_SYNC_SYNCHOM		0x08				// 
#define FTM_SYNC_REINIT			0x04				// 
#define FTM_SYNC_CNTMAX			0x02				// 
#define FTM_SYNC_CNTMIN			0x01				// 
#define FTM0_OUTINIT		*(volatile uint32_t *)0x4003805C // Initial State For Channels Output
#define FTM0_OUTMASK		*(volatile uint32_t *)0x40038060 // Output Mask
#define FTM0_COMBINE		*(volatile uint32_t *)0x40038064 // Function For Linked Channels
#define FTM0_DEADTIME		*(volatile uint32_t *)0x40038068 // Deadtime Insertion Control
#define FTM0_EXTTRIG		*(volatile uint32_t *)0x4003806C // FTM External Trigger
#define FTM0_POL		*(volatile uint32_t *)0x40038070 // Channels Polarity
#define FTM0_FMS		*(volatile uint32_t *)0x40038074 // Fault Mode Status
#define FTM0_FILTER		*(volatile uint32_t *)0x40038078 // Input Capture Filter Control
#define FTM0_FLTCTRL		*(volatile uint32_t *)0x4003807C // Fault Control
#define FTM0_QDCTRL		*(volatile uint32_t *)0x40038080 // Quadrature Decoder Control And Status
#define FTM0_CONF		*(volatile uint32_t *)0x40038084 // Configuration
#define FTM0_FLTPOL		*(volatile uint32_t *)0x40038088 // FTM Fault Input Polarity
#define FTM0_SYNCONF		*(volatile uint32_t *)0x4003808C // Synchronization Configuration
#define FTM0_INVCTRL		*(volatile uint32_t *)0x40038090 // FTM Inverting Control
#define FTM0_SWOCTRL		*(volatile uint32_t *)0x40038094 // FTM Software Output Control
#define FTM0_PWMLOAD		*(volatile uint32_t *)0x40038098 // FTM PWM Load
#define FTM1_SC			*(volatile uint32_t *)0x40039000 // Status And Control
#define FTM1_CNT		*(volatile uint32_t *)0x40039004 // Counter
#define FTM1_MOD		*(volatile uint32_t *)0x40039008 // Modulo
#define FTM1_C0SC		*(volatile uint32_t *)0x4003900C // Channel 0 Status And Control
#define FTM1_C0V		*(volatile uint32_t *)0x40039010 // Channel 0 Value
#define FTM1_C1SC		*(volatile uint32_t *)0x40039014 // Channel 1 Status And Control
#define FTM1_C1V		*(volatile uint32_t *)0x40039018 // Channel 1 Value
#define FTM1_CNTIN		*(volatile uint32_t *)0x4003904C // Counter Initial Value
#define FTM1_STATUS		*(volatile uint32_t *)0x40039050 // Capture And Compare Status
#define FTM1_MODE		*(volatile uint32_t *)0x40039054 // Features Mode Selection
#define FTM1_SYNC		*(volatile uint32_t *)0x40039058 // Synchronization
#define FTM1_OUTINIT		*(volatile uint32_t *)0x4003905C // Initial State For Channels Output
#define FTM1_OUTMASK		*(volatile uint32_t *)0x40039060 // Output Mask
#define FTM1_COMBINE		*(volatile uint32_t *)0x40039064 // Function For Linked Channels
#define FTM1_DEADTIME		*(volatile uint32_t *)0x40039068 // Deadtime Insertion Control
#define FTM1_EXTTRIG		*(volatile uint32_t *)0x4003906C // FTM External Trigger
#define FTM1_POL		*(volatile uint32_t *)0x40039070 // Channels Polarity
#define FTM1_FMS		*(volatile uint32_t *)0x40039074 // Fault Mode Status
#define FTM1_FILTER		*(volatile uint32_t *)0x40039078 // Input Capture Filter Control
#define FTM1_FLTCTRL		*(volatile uint32_t *)0x4003907C // Fault Control
#define FTM1_QDCTRL		*(volatile uint32_t *)0x40039080 // Quadrature Decoder Control And Status
#define FTM1_CONF		*(volatile uint32_t *)0x40039084 // Configuration
#define FTM1_FLTPOL		*(volatile uint32_t *)0x40039088 // FTM Fault Input Polarity
#define FTM1_SYNCONF		*(volatile uint32_t *)0x4003908C // Synchronization Configuration
#define FTM1_INVCTRL		*(volatile uint32_t *)0x40039090 // FTM Inverting Control
#define FTM1_SWOCTRL		*(volatile uint32_t *)0x40039094 // FTM Software Output Control
#define FTM1_PWMLOAD		*(volatile uint32_t *)0x40039098 // FTM PWM Load
#define FTM2_SC			*(volatile uint32_t *)0x400B8000 // Status And Control
#define FTM2_CNT		*(volatile uint32_t *)0x400B8004 // Counter
#define FTM2_MOD		*(volatile uint32_t *)0x400B8008 // Modulo
#define FTM2_C0SC		*(volatile uint32_t *)0x400B800C // Channel 0 Status And Control
#define FTM2_C0V		*(volatile uint32_t *)0x400B8010 // Channel 0 Value
#define FTM2_C1SC		*(volatile uint32_t *)0x400B8014 // Channel 1 Status And Control
#define FTM2_C1V		*(volatile uint32_t *)0x400B8018 // Channel 1 Value
#define FTM2_CNTIN		*(volatile uint32_t *)0x400B804C // Counter Initial Value
#define FTM2_STATUS		*(volatile uint32_t *)0x400B8050 // Capture And Compare Status
#define FTM2_MODE		*(volatile uint32_t *)0x400B8054 // Features Mode Selection
#define FTM2_SYNC		*(volatile uint32_t *)0x400B8058 // Synchronization
#define FTM2_OUTINIT		*(volatile uint32_t *)0x400B805C // Initial State For Channels Output
#define FTM2_OUTMASK		*(volatile uint32_t *)0x400B8060 // Output Mask
#define FTM2_COMBINE		*(volatile uint32_t *)0x400B8064 // Function For Linked Channels
#define FTM2_DEADTIME		*(volatile uint32_t *)0x400B8068 // Deadtime Insertion Control
#define FTM2_EXTTRIG		*(volatile uint32_t *)0x400B806C // FTM External Trigger
#define FTM2_POL		*(volatile uint32_t *)0x400B8070 // Channels Polarity
#define FTM2_FMS		*(volatile uint32_t *)0x400B8074 // Fault Mode Status
#define FTM2_FILTER		*(volatile uint32_t *)0x400B8078 // Input Capture Filter Control
#define FTM2_FLTCTRL		*(volatile uint32_t *)0x400B807C // Fault Control
#define FTM2_QDCTRL		*(volatile uint32_t *)0x400B8080 // Quadrature Decoder Control And Status
#define FTM2_CONF		*(volatile uint32_t *)0x400B8084 // Configuration
#define FTM2_FLTPOL		*(volatile uint32_t *)0x400B8088 // FTM Fault Input Polarity
#define FTM2_SYNCONF		*(volatile uint32_t *)0x400B808C // Synchronization Configuration
#define FTM2_INVCTRL		*(volatile uint32_t *)0x400B8090 // FTM Inverting Control
#define FTM2_SWOCTRL		*(volatile uint32_t *)0x400B8094 // FTM Software Output Control
#define FTM2_PWMLOAD		*(volatile uint32_t *)0x400B8098 // FTM PWM Load

// Chapter 36: Periodic Interrupt Timer (PIT)
#define PIT_MCR			*(volatile uint32_t *)0x40037000 // PIT Module Control Register
#define PIT_LDVAL0		*(volatile uint32_t *)0x40037100 // Timer Load Value Register
#define PIT_CVAL0		*(volatile uint32_t *)0x40037104 // Current Timer Value Register
#define PIT_TCTRL0		*(volatile uint32_t *)0x40037108 // Timer Control Register
#define PIT_TFLG0		*(volatile uint32_t *)0x4003710C // Timer Flag Register
#define PIT_LDVAL1		*(volatile uint32_t *)0x40037110 // Timer Load Value Register
#define PIT_CVAL1		*(volatile uint32_t *)0x40037114 // Current Timer Value Register
#define PIT_TCTRL1		*(volatile uint32_t *)0x40037118 // Timer Control Register
#define PIT_TFLG1		*(volatile uint32_t *)0x4003711C // Timer Flag Register
#define PIT_LDVAL2		*(volatile uint32_t *)0x40037120 // Timer Load Value Register
#define PIT_CVAL2		*(volatile uint32_t *)0x40037124 // Current Timer Value Register
#define PIT_TCTRL2		*(volatile uint32_t *)0x40037128 // Timer Control Register
#define PIT_TFLG2		*(volatile uint32_t *)0x4003712C // Timer Flag Register
#define PIT_LDVAL3		*(volatile uint32_t *)0x40037130 // Timer Load Value Register
#define PIT_CVAL3		*(volatile uint32_t *)0x40037134 // Current Timer Value Register
#define PIT_TCTRL3		*(volatile uint32_t *)0x40037138 // Timer Control Register
#define PIT_TFLG3		*(volatile uint32_t *)0x4003713C // Timer Flag Register

// Chapter 37: Low-Power Timer (LPTMR)
#define LPTMR0_CSR		*(volatile uint32_t *)0x40040000 // Low Power Timer Control Status Register
#define LPTMR0_PSR		*(volatile uint32_t *)0x40040004 // Low Power Timer Prescale Register
#define LPTMR0_CMR		*(volatile uint32_t *)0x40040008 // Low Power Timer Compare Register
#define LPTMR0_CNR		*(volatile uint32_t *)0x4004000C // Low Power Timer Counter Register

// Chapter 38: Carrier Modulator Transmitter (CMT)
#define CMT_CGH1		*(volatile uint8_t  *)0x40062000 // CMT Carrier Generator High Data Register 1
#define CMT_CGL1		*(volatile uint8_t  *)0x40062001 // CMT Carrier Generator Low Data Register 1
#define CMT_CGH2		*(volatile uint8_t  *)0x40062002 // CMT Carrier Generator High Data Register 2
#define CMT_CGL2		*(volatile uint8_t  *)0x40062003 // CMT Carrier Generator Low Data Register 2
#define CMT_OC			*(volatile uint8_t  *)0x40062004 // CMT Output Control Register
#define CMT_MSC			*(volatile uint8_t  *)0x40062005 // CMT Modulator Status and Control Register
#define CMT_CMD1		*(volatile uint8_t  *)0x40062006 // CMT Modulator Data Register Mark High
#define CMT_CMD2		*(volatile uint8_t  *)0x40062007 // CMT Modulator Data Register Mark Low
#define CMT_CMD3		*(volatile uint8_t  *)0x40062008 // CMT Modulator Data Register Space High
#define CMT_CMD4		*(volatile uint8_t  *)0x40062009 // CMT Modulator Data Register Space Low
#define CMT_PPS			*(volatile uint8_t  *)0x4006200A // CMT Primary Prescaler Register
#define CMT_DMA			*(volatile uint8_t  *)0x4006200B // CMT Direct Memory Access Register

// Chapter 39: Real Time Clock (RTC)
#define RTC_TSR			*(volatile uint32_t *)0x4003D000 // RTC Time Seconds Register
#define RTC_TPR			*(volatile uint32_t *)0x4003D004 // RTC Time Prescaler Register
#define RTC_TAR			*(volatile uint32_t *)0x4003D008 // RTC Time Alarm Register
#define RTC_TCR			*(volatile uint32_t *)0x4003D00C // RTC Time Compensation Register
#define RTC_TCR_CIC(n)			(((n) & 255) << 24)		// Compensation Interval Counter
#define RTC_TCR_TCV(n)			(((n) & 255) << 16)		// Time Compensation Value
#define RTC_TCR_CIR(n)			(((n) & 255) << 8)		// Compensation Interval Register
#define RTC_TCR_TCR(n)			(((n) & 255) << 0)		// Time Compensation Register
#define RTC_CR			*(volatile uint32_t *)0x4003D010 // RTC Control Register
#define RTC_CR_SC2P			(uint32_t)0x00002000		// 
#define RTC_CR_SC4P			(uint32_t)0x00001000		// 
#define RTC_CR_SC8P			(uint32_t)0x00000800		// 
#define RTC_CR_SC16P			(uint32_t)0x00000400		// 
#define RTC_CR_CLKO			(uint32_t)0x00000200		// 
#define RTC_CR_OSCE			(uint32_t)0x00000100		// 
#define RTC_CR_UM			(uint32_t)0x00000008		// 
#define RTC_CR_SUP			(uint32_t)0x00000004		// 
#define RTC_CR_WPE			(uint32_t)0x00000002		// 
#define RTC_CR_SWR			(uint32_t)0x00000001		// 
#define RTC_SR			*(volatile uint32_t *)0x4003D014 // RTC Status Register
#define RTC_SR_TCE			(uint32_t)0x00000010		// 
#define RTC_SR_TAF			(uint32_t)0x00000004		// 
#define RTC_SR_TOF			(uint32_t)0x00000002		// 
#define RTC_SR_TIF			(uint32_t)0x00000001		// 
#define RTC_LR			*(volatile uint32_t *)0x4003D018 // RTC Lock Register
#define RTC_IER			*(volatile uint32_t *)0x4003D01C // RTC Interrupt Enable Register
#define RTC_WAR			*(volatile uint32_t *)0x4003D800 // RTC Write Access Register
#define RTC_RAR			*(volatile uint32_t *)0x4003D804 // RTC Read Access Register

// Chapter 40: Universal Serial Bus OTG Controller (USBOTG)
#define USB0_PERID		*(const	   uint8_t  *)0x40072000 // Peripheral ID register
#define USB0_IDCOMP		*(const	   uint8_t  *)0x40072004 // Peripheral ID Complement register
#define USB0_REV		*(const	   uint8_t  *)0x40072008 // Peripheral Revision register
#define USB0_ADDINFO		*(volatile uint8_t  *)0x4007200C // Peripheral Additional Info register
#define USB0_OTGISTAT		*(volatile uint8_t  *)0x40072010 // OTG Interrupt Status register
#define USB_OTGISTAT_IDCHG		(uint8_t)0x80			//
#define USB_OTGISTAT_ONEMSEC		(uint8_t)0x40			//
#define USB_OTGISTAT_LINE_STATE_CHG	(uint8_t)0x20			//
#define USB_OTGISTAT_SESSVLDCHG		(uint8_t)0x08			//
#define USB_OTGISTAT_B_SESS_CHG		(uint8_t)0x04			//
#define USB_OTGISTAT_AVBUSCHG		(uint8_t)0x01			//
#define USB0_OTGICR		*(volatile uint8_t  *)0x40072014 // OTG Interrupt Control Register
#define USB_OTGICR_IDEN			(uint8_t)0x80			// 
#define USB_OTGICR_ONEMSECEN		(uint8_t)0x40			// 
#define USB_OTGICR_LINESTATEEN		(uint8_t)0x20			// 
#define USB_OTGICR_SESSVLDEN		(uint8_t)0x08			// 
#define USB_OTGICR_BSESSEN		(uint8_t)0x04			// 
#define USB_OTGICR_AVBUSEN		(uint8_t)0x01			// 
#define USB0_OTGSTAT		*(volatile uint8_t  *)0x40072018 // OTG Status register
#define USB_OTGSTAT_ID			(uint8_t)0x80			// 
#define USB_OTGSTAT_ONEMSECEN		(uint8_t)0x40			// 
#define USB_OTGSTAT_LINESTATESTABLE	(uint8_t)0x20			// 
#define USB_OTGSTAT_SESS_VLD		(uint8_t)0x08			// 
#define USB_OTGSTAT_BSESSEND		(uint8_t)0x04			// 
#define USB_OTGSTAT_AVBUSVLD		(uint8_t)0x01			// 
#define USB0_OTGCTL		*(volatile uint8_t  *)0x4007201C // OTG Control Register
#define USB_OTGCTL_DPHIGH		(uint8_t)0x80			// 
#define USB_OTGCTL_DPLOW		(uint8_t)0x20			// 
#define USB_OTGCTL_DMLOW		(uint8_t)0x10			// 
#define USB_OTGCTL_OTGEN		(uint8_t)0x04			// 
#define USB0_ISTAT		*(volatile uint8_t  *)0x40072080 // Interrupt Status Register
#define USB_ISTAT_STALL			(uint8_t)0x80			// 
#define USB_ISTAT_ATTACH		(uint8_t)0x40			// 
#define USB_ISTAT_RESUME		(uint8_t)0x20			// 
#define USB_ISTAT_SLEEP			(uint8_t)0x10			// 
#define USB_ISTAT_TOKDNE		(uint8_t)0x08			// 
#define USB_ISTAT_SOFTOK		(uint8_t)0x04			// 
#define USB_ISTAT_ERROR			(uint8_t)0x02			// 
#define USB_ISTAT_USBRST		(uint8_t)0x01			// 
#define USB0_INTEN		*(volatile uint8_t  *)0x40072084 // Interrupt Enable Register
#define USB_INTEN_STALLEN		(uint8_t)0x80			// 
#define USB_INTEN_ATTACHEN		(uint8_t)0x40			// 
#define USB_INTEN_RESUMEEN		(uint8_t)0x20			// 
#define USB_INTEN_SLEEPEN		(uint8_t)0x10			// 
#define USB_INTEN_TOKDNEEN		(uint8_t)0x08			// 
#define USB_INTEN_SOFTOKEN		(uint8_t)0x04			// 
#define USB_INTEN_ERROREN		(uint8_t)0x02			// 
#define USB_INTEN_USBRSTEN		(uint8_t)0x01			// 
#define USB0_ERRSTAT		*(volatile uint8_t  *)0x40072088 // Error Interrupt Status Register
#define USB_ERRSTAT_BTSERR		(uint8_t)0x80			// 
#define USB_ERRSTAT_DMAERR		(uint8_t)0x20			// 
#define USB_ERRSTAT_BTOERR		(uint8_t)0x10			// 
#define USB_ERRSTAT_DFN8		(uint8_t)0x08			// 
#define USB_ERRSTAT_CRC16		(uint8_t)0x04			// 
#define USB_ERRSTAT_CRC5EOF		(uint8_t)0x02			// 
#define USB_ERRSTAT_PIDERR		(uint8_t)0x01			// 
#define USB0_ERREN		*(volatile uint8_t  *)0x4007208C // Error Interrupt Enable Register
#define USB_ERREN_BTSERREN		(uint8_t)0x80			// 
#define USB_ERREN_DMAERREN		(uint8_t)0x20			// 
#define USB_ERREN_BTOERREN		(uint8_t)0x10			// 
#define USB_ERREN_DFN8EN		(uint8_t)0x08			// 
#define USB_ERREN_CRC16EN		(uint8_t)0x04			// 
#define USB_ERREN_CRC5EOFEN		(uint8_t)0x02			// 
#define USB_ERREN_PIDERREN		(uint8_t)0x01			// 
#define USB0_STAT		*(volatile uint8_t  *)0x40072090 // Status Register
#define USB_STAT_TX			(uint8_t)0x08			// 
#define USB_STAT_ODD			(uint8_t)0x04			// 
#define USB_STAT_ENDP(n)		(uint8_t)((n) >> 4)		// 
#define USB0_CTL		*(volatile uint8_t  *)0x40072094 // Control Register
#define USB_CTL_JSTATE			(uint8_t)0x80			// 
#define USB_CTL_SE0			(uint8_t)0x40			// 
#define USB_CTL_TXSUSPENDTOKENBUSY	(uint8_t)0x20			// 
#define USB_CTL_RESET			(uint8_t)0x10			// 
#define USB_CTL_HOSTMODEEN		(uint8_t)0x08			// 
#define USB_CTL_RESUME			(uint8_t)0x04			// 
#define USB_CTL_ODDRST			(uint8_t)0x02			// 
#define USB_CTL_USBENSOFEN		(uint8_t)0x01			// 
#define USB0_ADDR		*(volatile uint8_t  *)0x40072098 // Address Register
#define USB0_BDTPAGE1		*(volatile uint8_t  *)0x4007209C // BDT Page Register 1
#define USB0_FRMNUML		*(volatile uint8_t  *)0x400720A0 // Frame Number Register Low
#define USB0_FRMNUMH		*(volatile uint8_t  *)0x400720A4 // Frame Number Register High
#define USB0_TOKEN		*(volatile uint8_t  *)0x400720A8 // Token Register
#define USB0_SOFTHLD		*(volatile uint8_t  *)0x400720AC // SOF Threshold Register
#define USB0_BDTPAGE2		*(volatile uint8_t  *)0x400720B0 // BDT Page Register 2
#define USB0_BDTPAGE3		*(volatile uint8_t  *)0x400720B4 // BDT Page Register 3
#define USB0_ENDPT0		*(volatile uint8_t  *)0x400720C0 // Endpoint Control Register
#define USB_ENDPT_HOSTWOHUB		(uint8_t)0x80			// host only, enable low speed
#define USB_ENDPT_RETRYDIS		(uint8_t)0x40			// host only, set to disable NAK retry
#define USB_ENDPT_EPCTLDIS		(uint8_t)0x10			// 0=control, 1=bulk, interrupt, isync
#define USB_ENDPT_EPRXEN		(uint8_t)0x08			// enables the endpoint for RX transfers.
#define USB_ENDPT_EPTXEN		(uint8_t)0x04			// enables the endpoint for TX transfers.
#define USB_ENDPT_EPSTALL		(uint8_t)0x02			// set to stall endpoint
#define USB_ENDPT_EPHSHK		(uint8_t)0x01			// enable handshaking during a transaction, generally set unless Isochronous
#define USB0_ENDPT1		*(volatile uint8_t  *)0x400720C4 // Endpoint Control Register
#define USB0_ENDPT2		*(volatile uint8_t  *)0x400720C8 // Endpoint Control Register
#define USB0_ENDPT3		*(volatile uint8_t  *)0x400720CC // Endpoint Control Register
#define USB0_ENDPT4		*(volatile uint8_t  *)0x400720D0 // Endpoint Control Register
#define USB0_ENDPT5		*(volatile uint8_t  *)0x400720D4 // Endpoint Control Register
#define USB0_ENDPT6		*(volatile uint8_t  *)0x400720D8 // Endpoint Control Register
#define USB0_ENDPT7		*(volatile uint8_t  *)0x400720DC // Endpoint Control Register
#define USB0_ENDPT8		*(volatile uint8_t  *)0x400720E0 // Endpoint Control Register
#define USB0_ENDPT9		*(volatile uint8_t  *)0x400720E4 // Endpoint Control Register
#define USB0_ENDPT10		*(volatile uint8_t  *)0x400720E8 // Endpoint Control Register
#define USB0_ENDPT11		*(volatile uint8_t  *)0x400720EC // Endpoint Control Register
#define USB0_ENDPT12		*(volatile uint8_t  *)0x400720F0 // Endpoint Control Register
#define USB0_ENDPT13		*(volatile uint8_t  *)0x400720F4 // Endpoint Control Register
#define USB0_ENDPT14		*(volatile uint8_t  *)0x400720F8 // Endpoint Control Register
#define USB0_ENDPT15		*(volatile uint8_t  *)0x400720FC // Endpoint Control Register
#define USB0_USBCTRL		*(volatile uint8_t  *)0x40072100 // USB Control Register
#define USB_USBCTRL_SUSP		(uint8_t)0x80			// Places the USB transceiver into the suspend state.
#define USB_USBCTRL_PDE			(uint8_t)0x40			// Enables the weak pulldowns on the USB transceiver.
#define USB0_OBSERVE		*(volatile uint8_t  *)0x40072104 // USB OTG Observe Register
#define USB_OBSERVE_DPPU		(uint8_t)0x80			// 
#define USB_OBSERVE_DPPD		(uint8_t)0x40			// 
#define USB_OBSERVE_DMPD		(uint8_t)0x10			// 
#define USB0_CONTROL		*(volatile uint8_t  *)0x40072108 // USB OTG Control Register
#define USB_CONTROL_DPPULLUPNONOTG	(uint8_t)0x10			//  Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG device mode.
#define USB0_USBTRC0		*(volatile uint8_t  *)0x4007210C // USB Transceiver Control Register 0
#define USB_USBTRC_USBRESET		(uint8_t)0x80			//
#define USB_USBTRC_USBRESMEN		(uint8_t)0x20			//
#define USB_USBTRC_SYNC_DET		(uint8_t)0x02			//
#define USB_USBTRC_USB_RESUME_INT	(uint8_t)0x01			//
#define USB0_USBFRMADJUST	*(volatile uint8_t  *)0x40072114 // Frame Adjust Register

// Chapter 41: USB Device Charger Detection Module (USBDCD)
#define USBDCD_CONTROL		*(volatile uint32_t *)0x40035000 // Control register
#define USBDCD_CLOCK		*(volatile uint32_t *)0x40035004 // Clock register
#define USBDCD_STATUS		*(volatile uint32_t *)0x40035008 // Status register
#define USBDCD_TIMER0		*(volatile uint32_t *)0x40035010 // TIMER0 register
#define USBDCD_TIMER1		*(volatile uint32_t *)0x40035014 // TIMER1 register
#define USBDCD_TIMER2		*(volatile uint32_t *)0x40035018 // TIMER2 register

// Chapter 43: SPI (DSPI)
#define SPI0_MCR		*(volatile uint32_t *)0x4002C000 // DSPI Module Configuration Register
#define SPI_MCR_MSTR			(uint32_t)0x80000000		// Master/Slave Mode Select
#define SPI_MCR_CONT_SCKE		(uint32_t)0x40000000		// 
#define SPI_MCR_DCONF(n)		(((n) & 3) << 28)		// 
#define SPI_MCR_FRZ			(uint32_t)0x08000000		// 
#define SPI_MCR_MTFE			(uint32_t)0x04000000		// 
#define SPI_MCR_ROOE			(uint32_t)0x01000000		// 
#define SPI_MCR_PCSIS(n)		(((n) & 0x1F) << 16)		//
#define SPI_MCR_DOZE			(uint32_t)0x00008000		// 
#define SPI_MCR_MDIS			(uint32_t)0x00004000		// 
#define SPI_MCR_DIS_TXF			(uint32_t)0x00002000		// 
#define SPI_MCR_DIS_RXF			(uint32_t)0x00001000		// 
#define SPI_MCR_CLR_TXF			(uint32_t)0x00000800		// 
#define SPI_MCR_CLR_RXF			(uint32_t)0x00000400		// 
#define SPI_MCR_SMPL_PT(n)		(((n) & 3) << 8)		//
#define SPI_MCR_HALT			(uint32_t)0x00000001		// 
#define SPI0_TCR		*(volatile uint32_t *)0x4002C008 // DSPI Transfer Count Register
#define SPI0_CTAR0		*(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Master Mode
#define SPI_CTAR_DBR			(uint32_t)0x80000000		// Double Baud Rate
#define SPI_CTAR_FMSZ(n)		(((n) & 15) << 27)		// Frame Size (+1)
#define SPI_CTAR_CPOL			(uint32_t)0x04000000		// Clock Polarity
#define SPI_CTAR_CPHA			(uint32_t)0x02000000		// Clock Phase
#define SPI_CTAR_LSBFE			(uint32_t)0x01000000		// LSB First
#define SPI_CTAR_PCSSCK(n)		(((n) & 3) << 22)		// PCS to SCK Delay Prescaler
#define SPI_CTAR_PASC(n)		(((n) & 3) << 20)		// After SCK Delay Prescaler
#define SPI_CTAR_PDT(n)			(((n) & 3) << 18)		// Delay after Transfer Prescaler
#define SPI_CTAR_PBR(n)			(((n) & 3) << 16)		// Baud Rate Prescaler
#define SPI_CTAR_CSSCK(n)		(((n) & 15) << 12)		// PCS to SCK Delay Scaler
#define SPI_CTAR_ASC(n)			(((n) & 15) << 8)		// After SCK Delay Scaler
#define SPI_CTAR_DT(n)			(((n) & 15) << 4)		// Delay After Transfer Scaler
#define SPI_CTAR_BR(n)			(((n) & 15) << 0)		// Baud Rate Scaler
#define SPI0_CTAR0_SLAVE	*(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Slave Mode
#define SPI0_CTAR1		*(volatile uint32_t *)0x4002C010 // DSPI Clock and Transfer Attributes Register, In Master Mode
#define SPI0_SR			*(volatile uint32_t *)0x4002C02C // DSPI Status Register
#define SPI_SR_TCF			(uint32_t)0x80000000		// Transfer Complete Flag
#define SPI_SR_TXRXS			(uint32_t)0x40000000		// TX and RX Status
#define SPI_SR_EOQF			(uint32_t)0x10000000		// End of Queue Flag
#define SPI_SR_TFUF			(uint32_t)0x08000000		// Transmit FIFO Underflow Flag
#define SPI_SR_TFFF			(uint32_t)0x02000000		// Transmit FIFO Fill Flag
#define SPI_SR_RFOF			(uint32_t)0x00080000		// Receive FIFO Overflow Flag
#define SPI_SR_RFDF			(uint32_t)0x00020000		// Receive FIFO Drain Flag
#define SPI0_RSER		*(volatile uint32_t *)0x4002C030 // DSPI DMA/Interrupt Request Select and Enable Register
#define SPI_RSER_TCF_RE			(uint32_t)0x80000000		// Transmission Complete Request Enable
#define SPI_RSER_EOQF_RE		(uint32_t)0x10000000		// DSPI Finished Request Request Enable
#define SPI_RSER_TFUF_RE		(uint32_t)0x08000000		// Transmit FIFO Underflow Request Enable
#define SPI_RSER_TFFF_RE		(uint32_t)0x02000000		// Transmit FIFO Fill Request Enable
#define SPI_RSER_TFFF_DIRS		(uint32_t)0x01000000		// Transmit FIFO FIll Dma or Interrupt Request Select
#define SPI_RSER_RFOF_RE		(uint32_t)0x00080000		// Receive FIFO Overflow Request Enable
#define SPI_RSER_RFDF_RE		(uint32_t)0x00020000		// Receive FIFO Drain Request Enable
#define SPI_RSER_RFDF_DIRS		(uint32_t)0x00010000		// Receive FIFO Drain DMA or Interrupt Request Select
#define SPI0_PUSHR		*(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Master Mode
#define SPI_PUSHR_CONT			(uint32_t)0x80000000		// 
#define SPI_PUSHR_CTAS(n)		(((n) & 7) << 28)		// 
#define SPI_PUSHR_EOQ			(uint32_t)0x08000000		// 
#define SPI_PUSHR_CTCNT			(uint32_t)0x04000000		// 
#define SPI_PUSHR_PCS(n)		(((n) & 31) << 16)		//
#define SPI0_PUSHR_SLAVE	*(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Slave Mode
#define SPI0_POPR		*(volatile uint32_t *)0x4002C038 // DSPI POP RX FIFO Register
#define SPI0_TXFR0		*(volatile uint32_t *)0x4002C03C // DSPI Transmit FIFO Registers
#define SPI0_TXFR1		*(volatile uint32_t *)0x4002C040 // DSPI Transmit FIFO Registers
#define SPI0_TXFR2		*(volatile uint32_t *)0x4002C044 // DSPI Transmit FIFO Registers
#define SPI0_TXFR3		*(volatile uint32_t *)0x4002C048 // DSPI Transmit FIFO Registers
#define SPI0_RXFR0		*(volatile uint32_t *)0x4002C07C // DSPI Receive FIFO Registers
#define SPI0_RXFR1		*(volatile uint32_t *)0x4002C080 // DSPI Receive FIFO Registers
#define SPI0_RXFR2		*(volatile uint32_t *)0x4002C084 // DSPI Receive FIFO Registers
#define SPI0_RXFR3		*(volatile uint32_t *)0x4002C088 // DSPI Receive FIFO Registers
typedef struct {
	volatile uint32_t	MCR;	// 0
	volatile uint32_t	unused1;// 4
	volatile uint32_t	TCR;	// 8
	volatile uint32_t	CTAR0;	// c
	volatile uint32_t	CTAR1;	// 10
	volatile uint32_t	CTAR2;	// 14
	volatile uint32_t	CTAR3;	// 18
	volatile uint32_t	CTAR4;	// 1c
	volatile uint32_t	CTAR5;	// 20
	volatile uint32_t	CTAR6;	// 24
	volatile uint32_t	CTAR7;	// 28
	volatile uint32_t	SR;	// 2c
	volatile uint32_t	RSER;	// 30
	volatile uint32_t	PUSHR;	// 34
	volatile uint32_t	POPR;	// 38
	volatile uint32_t	TXFR[16]; // 3c
	volatile uint32_t	RXFR[16]; // 7c
} SPI_t;
#define SPI0		(*(SPI_t *)0x4002C000)

// Chapter 44: Inter-Integrated Circuit (I2C)
#define I2C0_A1			*(volatile uint8_t  *)0x40066000 // I2C Address Register 1
#define I2C0_F			*(volatile uint8_t  *)0x40066001 // I2C Frequency Divider register
#define I2C0_C1			*(volatile uint8_t  *)0x40066002 // I2C Control Register 1
#define I2C_C1_IICEN			(uint8_t)0x80			// I2C Enable
#define I2C_C1_IICIE			(uint8_t)0x40			// I2C Interrupt Enable
#define I2C_C1_MST			(uint8_t)0x20			// Master Mode Select
#define I2C_C1_TX			(uint8_t)0x10			// Transmit Mode Select
#define I2C_C1_TXAK			(uint8_t)0x08			// Transmit Acknowledge Enable
#define I2C_C1_RSTA			(uint8_t)0x04			// Repeat START
#define I2C_C1_WUEN			(uint8_t)0x02			// Wakeup Enable
#define I2C_C1_DMAEN			(uint8_t)0x01			// DMA Enable
#define I2C0_S			*(volatile uint8_t  *)0x40066003 // I2C Status register
#define I2C_S_TCF			(uint8_t)0x80			// Transfer Complete Flag
#define I2C_S_IAAS			(uint8_t)0x40			// Addressed As A Slave
#define I2C_S_BUSY			(uint8_t)0x20			// Bus Busy
#define I2C_S_ARBL			(uint8_t)0x10			// Arbitration Lost
#define I2C_S_RAM			(uint8_t)0x08			// Range Address Match
#define I2C_S_SRW			(uint8_t)0x04			// Slave Read/Write
#define I2C_S_IICIF			(uint8_t)0x02			// Interrupt Flag
#define I2C_S_RXAK			(uint8_t)0x01			// Receive Acknowledge
#define I2C0_D			*(volatile uint8_t  *)0x40066004 // I2C Data I/O register
#define I2C0_C2			*(volatile uint8_t  *)0x40066005 // I2C Control Register 2
#define I2C_C2_GCAEN			(uint8_t)0x80			// General Call Address Enable
#define I2C_C2_ADEXT			(uint8_t)0x40			// Address Extension
#define I2C_C2_HDRS			(uint8_t)0x20			// High Drive Select
#define I2C_C2_SBRC			(uint8_t)0x10			// Slave Baud Rate Control
#define I2C_C2_RMEN			(uint8_t)0x08			// Range Address Matching Enable
#define I2C_C2_AD(n)			((n) & 7)			// Slave Address, upper 3 bits
#define I2C0_FLT		*(volatile uint8_t  *)0x40066006 // I2C Programmable Input Glitch Filter register
#define I2C0_RA			*(volatile uint8_t  *)0x40066007 // I2C Range Address register
#define I2C0_SMB		*(volatile uint8_t  *)0x40066008 // I2C SMBus Control and Status register
#define I2C0_A2			*(volatile uint8_t  *)0x40066009 // I2C Address Register 2
#define I2C0_SLTH		*(volatile uint8_t  *)0x4006600A // I2C SCL Low Timeout Register High
#define I2C0_SLTL		*(volatile uint8_t  *)0x4006600B // I2C SCL Low Timeout Register Low

#define I2C1_A1			*(volatile uint8_t  *)0x40067000 // I2C Address Register 1
#define I2C1_F			*(volatile uint8_t  *)0x40067001 // I2C Frequency Divider register
#define I2C1_C1			*(volatile uint8_t  *)0x40067002 // I2C Control Register 1
#define I2C1_S			*(volatile uint8_t  *)0x40067003 // I2C Status register
#define I2C1_D			*(volatile uint8_t  *)0x40067004 // I2C Data I/O register
#define I2C1_C2			*(volatile uint8_t  *)0x40067005 // I2C Control Register 2
#define I2C1_FLT		*(volatile uint8_t  *)0x40067006 // I2C Programmable Input Glitch Filter register
#define I2C1_RA			*(volatile uint8_t  *)0x40067007 // I2C Range Address register
#define I2C1_SMB		*(volatile uint8_t  *)0x40067008 // I2C SMBus Control and Status register
#define I2C1_A2			*(volatile uint8_t  *)0x40067009 // I2C Address Register 2
#define I2C1_SLTH		*(volatile uint8_t  *)0x4006700A // I2C SCL Low Timeout Register High
#define I2C1_SLTL		*(volatile uint8_t  *)0x4006700B // I2C SCL Low Timeout Register Low

// Chapter 45: Universal Asynchronous Receiver/Transmitter (UART)
#define UART0_BDH		*(volatile uint8_t  *)0x4006A000 // UART Baud Rate Registers: High
#define UART0_BDL		*(volatile uint8_t  *)0x4006A001 // UART Baud Rate Registers: Low
#define UART0_C1		*(volatile uint8_t  *)0x4006A002 // UART Control Register 1
#define UART_C1_LOOPS			(uint8_t)0x80			// When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input
#define UART_C1_UARTSWAI		(uint8_t)0x40			// UART Stops in Wait Mode
#define UART_C1_RSRC			(uint8_t)0x20			// When LOOPS is set, the RSRC field determines the source for the receiver shift register input
#define UART_C1_M			(uint8_t)0x10			// 9-bit or 8-bit Mode Select
#define UART_C1_WAKE			(uint8_t)0x08			// Determines which condition wakes the UART
#define UART_C1_ILT			(uint8_t)0x04			// Idle Line Type Select
#define UART_C1_PE			(uint8_t)0x02			// Parity Enable
#define UART_C1_PT			(uint8_t)0x01			// Parity Type, 0=even, 1=odd
#define UART0_C2		*(volatile uint8_t  *)0x4006A003 // UART Control Register 2
#define UART_C2_TIE			(uint8_t)0x80			// Transmitter Interrupt or DMA Transfer Enable.
#define UART_C2_TCIE			(uint8_t)0x40			// Transmission Complete Interrupt Enable
#define UART_C2_RIE			(uint8_t)0x20			// Receiver Full Interrupt or DMA Transfer Enable
#define UART_C2_ILIE			(uint8_t)0x10			// Idle Line Interrupt Enable
#define UART_C2_TE			(uint8_t)0x08			// Transmitter Enable
#define UART_C2_RE			(uint8_t)0x04			// Receiver Enable
#define UART_C2_RWU			(uint8_t)0x02			// Receiver Wakeup Control
#define UART_C2_SBK			(uint8_t)0x01			// Send Break
#define UART0_S1		*(volatile uint8_t  *)0x4006A004 // UART Status Register 1
#define UART_S1_TDRE			(uint8_t)0x80			// Transmit Data Register Empty Flag
#define UART_S1_TC			(uint8_t)0x40			// Transmit Complete Flag
#define UART_S1_RDRF			(uint8_t)0x20			// Receive Data Register Full Flag
#define UART_S1_IDLE			(uint8_t)0x10			// Idle Line Flag
#define UART_S1_OR			(uint8_t)0x08			// Receiver Overrun Flag
#define UART_S1_NF			(uint8_t)0x04			// Noise Flag
#define UART_S1_FE			(uint8_t)0x02			// Framing Error Flag
#define UART_S1_PF			(uint8_t)0x01			// Parity Error Flag
#define UART0_S2		*(volatile uint8_t  *)0x4006A005 // UART Status Register 2
#define UART0_C3		*(volatile uint8_t  *)0x4006A006 // UART Control Register 3
#define UART0_D			*(volatile uint8_t  *)0x4006A007 // UART Data Register
#define UART0_MA1		*(volatile uint8_t  *)0x4006A008 // UART Match Address Registers 1
#define UART0_MA2		*(volatile uint8_t  *)0x4006A009 // UART Match Address Registers 2
#define UART0_C4		*(volatile uint8_t  *)0x4006A00A // UART Control Register 4
#define UART0_C5		*(volatile uint8_t  *)0x4006A00B // UART Control Register 5
#define UART0_ED		*(volatile uint8_t  *)0x4006A00C // UART Extended Data Register
#define UART0_MODEM		*(volatile uint8_t  *)0x4006A00D // UART Modem Register
#define UART0_IR		*(volatile uint8_t  *)0x4006A00E // UART Infrared Register
#define UART0_PFIFO		*(volatile uint8_t  *)0x4006A010 // UART FIFO Parameters
#define UART_PFIFO_TXFE			(uint8_t)0x80
#define UART_PFIFO_RXFE			(uint8_t)0x08
#define UART0_CFIFO		*(volatile uint8_t  *)0x4006A011 // UART FIFO Control Register
#define UART_CFIFO_TXFLUSH		(uint8_t)0x80			// 
#define UART_CFIFO_RXFLUSH		(uint8_t)0x40			// 
#define UART_CFIFO_RXOFE		(uint8_t)0x04			// 
#define UART_CFIFO_TXOFE		(uint8_t)0x02			// 
#define UART_CFIFO_RXUFE		(uint8_t)0x01			// 
#define UART0_SFIFO		*(volatile uint8_t  *)0x4006A012 // UART FIFO Status Register
#define UART_SFIFO_TXEMPT		(uint8_t)0x80
#define UART_SFIFO_RXEMPT		(uint8_t)0x40
#define UART_SFIFO_RXOF			(uint8_t)0x04
#define UART_SFIFO_TXOF			(uint8_t)0x02
#define UART_SFIFO_RXUF			(uint8_t)0x01
#define UART0_TWFIFO		*(volatile uint8_t  *)0x4006A013 // UART FIFO Transmit Watermark
#define UART0_TCFIFO		*(volatile uint8_t  *)0x4006A014 // UART FIFO Transmit Count
#define UART0_RWFIFO		*(volatile uint8_t  *)0x4006A015 // UART FIFO Receive Watermark
#define UART0_RCFIFO		*(volatile uint8_t  *)0x4006A016 // UART FIFO Receive Count
#define UART0_C7816		*(volatile uint8_t  *)0x4006A018 // UART 7816 Control Register
#define UART0_IE7816		*(volatile uint8_t  *)0x4006A019 // UART 7816 Interrupt Enable Register
#define UART0_IS7816		*(volatile uint8_t  *)0x4006A01A // UART 7816 Interrupt Status Register
#define UART0_WP7816T0		*(volatile uint8_t  *)0x4006A01B // UART 7816 Wait Parameter Register
#define UART0_WP7816T1		*(volatile uint8_t  *)0x4006A01B // UART 7816 Wait Parameter Register
#define UART0_WN7816		*(volatile uint8_t  *)0x4006A01C // UART 7816 Wait N Register
#define UART0_WF7816		*(volatile uint8_t  *)0x4006A01D // UART 7816 Wait FD Register
#define UART0_ET7816		*(volatile uint8_t  *)0x4006A01E // UART 7816 Error Threshold Register
#define UART0_TL7816		*(volatile uint8_t  *)0x4006A01F // UART 7816 Transmit Length Register
#define UART0_C6		*(volatile uint8_t  *)0x4006A021 // UART CEA709.1-B Control Register 6
#define UART0_PCTH		*(volatile uint8_t  *)0x4006A022 // UART CEA709.1-B Packet Cycle Time Counter High
#define UART0_PCTL		*(volatile uint8_t  *)0x4006A023 // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART0_B1T		*(volatile uint8_t  *)0x4006A024 // UART CEA709.1-B Beta1 Timer
#define UART0_SDTH		*(volatile uint8_t  *)0x4006A025 // UART CEA709.1-B Secondary Delay Timer High
#define UART0_SDTL		*(volatile uint8_t  *)0x4006A026 // UART CEA709.1-B Secondary Delay Timer Low
#define UART0_PRE		*(volatile uint8_t  *)0x4006A027 // UART CEA709.1-B Preamble
#define UART0_TPL		*(volatile uint8_t  *)0x4006A028 // UART CEA709.1-B Transmit Packet Length
#define UART0_IE		*(volatile uint8_t  *)0x4006A029 // UART CEA709.1-B Interrupt Enable Register
#define UART0_WB		*(volatile uint8_t  *)0x4006A02A // UART CEA709.1-B WBASE
#define UART0_S3		*(volatile uint8_t  *)0x4006A02B // UART CEA709.1-B Status Register
#define UART0_S4		*(volatile uint8_t  *)0x4006A02C // UART CEA709.1-B Status Register
#define UART0_RPL		*(volatile uint8_t  *)0x4006A02D // UART CEA709.1-B Received Packet Length
#define UART0_RPREL		*(volatile uint8_t  *)0x4006A02E // UART CEA709.1-B Received Preamble Length
#define UART0_CPW		*(volatile uint8_t  *)0x4006A02F // UART CEA709.1-B Collision Pulse Width
#define UART0_RIDT		*(volatile uint8_t  *)0x4006A030 // UART CEA709.1-B Receive Indeterminate Time
#define UART0_TIDT		*(volatile uint8_t  *)0x4006A031 // UART CEA709.1-B Transmit Indeterminate Time
#define UART1_BDH		*(volatile uint8_t  *)0x4006B000 // UART Baud Rate Registers: High
#define UART1_BDL		*(volatile uint8_t  *)0x4006B001 // UART Baud Rate Registers: Low
#define UART1_C1		*(volatile uint8_t  *)0x4006B002 // UART Control Register 1
#define UART1_C2		*(volatile uint8_t  *)0x4006B003 // UART Control Register 2
#define UART1_S1		*(volatile uint8_t  *)0x4006B004 // UART Status Register 1
#define UART1_S2		*(volatile uint8_t  *)0x4006B005 // UART Status Register 2
#define UART1_C3		*(volatile uint8_t  *)0x4006B006 // UART Control Register 3
#define UART1_D			*(volatile uint8_t  *)0x4006B007 // UART Data Register
#define UART1_MA1		*(volatile uint8_t  *)0x4006B008 // UART Match Address Registers 1
#define UART1_MA2		*(volatile uint8_t  *)0x4006B009 // UART Match Address Registers 2
#define UART1_C4		*(volatile uint8_t  *)0x4006B00A // UART Control Register 4
#define UART1_C5		*(volatile uint8_t  *)0x4006B00B // UART Control Register 5
#define UART1_ED		*(volatile uint8_t  *)0x4006B00C // UART Extended Data Register
#define UART1_MODEM		*(volatile uint8_t  *)0x4006B00D // UART Modem Register
#define UART1_IR		*(volatile uint8_t  *)0x4006B00E // UART Infrared Register
#define UART1_PFIFO		*(volatile uint8_t  *)0x4006B010 // UART FIFO Parameters
#define UART1_CFIFO		*(volatile uint8_t  *)0x4006B011 // UART FIFO Control Register
#define UART1_SFIFO		*(volatile uint8_t  *)0x4006B012 // UART FIFO Status Register
#define UART1_TWFIFO		*(volatile uint8_t  *)0x4006B013 // UART FIFO Transmit Watermark
#define UART1_TCFIFO		*(volatile uint8_t  *)0x4006B014 // UART FIFO Transmit Count
#define UART1_RWFIFO		*(volatile uint8_t  *)0x4006B015 // UART FIFO Receive Watermark
#define UART1_RCFIFO		*(volatile uint8_t  *)0x4006B016 // UART FIFO Receive Count
#define UART1_C7816		*(volatile uint8_t  *)0x4006B018 // UART 7816 Control Register
#define UART1_IE7816		*(volatile uint8_t  *)0x4006B019 // UART 7816 Interrupt Enable Register
#define UART1_IS7816		*(volatile uint8_t  *)0x4006B01A // UART 7816 Interrupt Status Register
#define UART1_WP7816T0		*(volatile uint8_t  *)0x4006B01B // UART 7816 Wait Parameter Register
#define UART1_WP7816T1		*(volatile uint8_t  *)0x4006B01B // UART 7816 Wait Parameter Register
#define UART1_WN7816		*(volatile uint8_t  *)0x4006B01C // UART 7816 Wait N Register
#define UART1_WF7816		*(volatile uint8_t  *)0x4006B01D // UART 7816 Wait FD Register
#define UART1_ET7816		*(volatile uint8_t  *)0x4006B01E // UART 7816 Error Threshold Register
#define UART1_TL7816		*(volatile uint8_t  *)0x4006B01F // UART 7816 Transmit Length Register
#define UART1_C6		*(volatile uint8_t  *)0x4006B021 // UART CEA709.1-B Control Register 6
#define UART1_PCTH		*(volatile uint8_t  *)0x4006B022 // UART CEA709.1-B Packet Cycle Time Counter High
#define UART1_PCTL		*(volatile uint8_t  *)0x4006B023 // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART1_B1T		*(volatile uint8_t  *)0x4006B024 // UART CEA709.1-B Beta1 Timer
#define UART1_SDTH		*(volatile uint8_t  *)0x4006B025 // UART CEA709.1-B Secondary Delay Timer High
#define UART1_SDTL		*(volatile uint8_t  *)0x4006B026 // UART CEA709.1-B Secondary Delay Timer Low
#define UART1_PRE		*(volatile uint8_t  *)0x4006B027 // UART CEA709.1-B Preamble
#define UART1_TPL		*(volatile uint8_t  *)0x4006B028 // UART CEA709.1-B Transmit Packet Length
#define UART1_IE		*(volatile uint8_t  *)0x4006B029 // UART CEA709.1-B Interrupt Enable Register
#define UART1_WB		*(volatile uint8_t  *)0x4006B02A // UART CEA709.1-B WBASE
#define UART1_S3		*(volatile uint8_t  *)0x4006B02B // UART CEA709.1-B Status Register
#define UART1_S4		*(volatile uint8_t  *)0x4006B02C // UART CEA709.1-B Status Register
#define UART1_RPL		*(volatile uint8_t  *)0x4006B02D // UART CEA709.1-B Received Packet Length
#define UART1_RPREL		*(volatile uint8_t  *)0x4006B02E // UART CEA709.1-B Received Preamble Length
#define UART1_CPW		*(volatile uint8_t  *)0x4006B02F // UART CEA709.1-B Collision Pulse Width
#define UART1_RIDT		*(volatile uint8_t  *)0x4006B030 // UART CEA709.1-B Receive Indeterminate Time
#define UART1_TIDT		*(volatile uint8_t  *)0x4006B031 // UART CEA709.1-B Transmit Indeterminate Time
#define UART2_BDH		*(volatile uint8_t  *)0x4006C000 // UART Baud Rate Registers: High
#define UART2_BDL		*(volatile uint8_t  *)0x4006C001 // UART Baud Rate Registers: Low
#define UART2_C1		*(volatile uint8_t  *)0x4006C002 // UART Control Register 1
#define UART2_C2		*(volatile uint8_t  *)0x4006C003 // UART Control Register 2
#define UART2_S1		*(volatile uint8_t  *)0x4006C004 // UART Status Register 1
#define UART2_S2		*(volatile uint8_t  *)0x4006C005 // UART Status Register 2
#define UART2_C3		*(volatile uint8_t  *)0x4006C006 // UART Control Register 3
#define UART2_D			*(volatile uint8_t  *)0x4006C007 // UART Data Register
#define UART2_MA1		*(volatile uint8_t  *)0x4006C008 // UART Match Address Registers 1
#define UART2_MA2		*(volatile uint8_t  *)0x4006C009 // UART Match Address Registers 2
#define UART2_C4		*(volatile uint8_t  *)0x4006C00A // UART Control Register 4
#define UART2_C5		*(volatile uint8_t  *)0x4006C00B // UART Control Register 5
#define UART2_ED		*(volatile uint8_t  *)0x4006C00C // UART Extended Data Register
#define UART2_MODEM		*(volatile uint8_t  *)0x4006C00D // UART Modem Register
#define UART2_IR		*(volatile uint8_t  *)0x4006C00E // UART Infrared Register
#define UART2_PFIFO		*(volatile uint8_t  *)0x4006C010 // UART FIFO Parameters
#define UART2_CFIFO		*(volatile uint8_t  *)0x4006C011 // UART FIFO Control Register
#define UART2_SFIFO		*(volatile uint8_t  *)0x4006C012 // UART FIFO Status Register
#define UART2_TWFIFO		*(volatile uint8_t  *)0x4006C013 // UART FIFO Transmit Watermark
#define UART2_TCFIFO		*(volatile uint8_t  *)0x4006C014 // UART FIFO Transmit Count
#define UART2_RWFIFO		*(volatile uint8_t  *)0x4006C015 // UART FIFO Receive Watermark
#define UART2_RCFIFO		*(volatile uint8_t  *)0x4006C016 // UART FIFO Receive Count
#define UART2_C7816		*(volatile uint8_t  *)0x4006C018 // UART 7816 Control Register
#define UART2_IE7816		*(volatile uint8_t  *)0x4006C019 // UART 7816 Interrupt Enable Register
#define UART2_IS7816		*(volatile uint8_t  *)0x4006C01A // UART 7816 Interrupt Status Register
#define UART2_WP7816T0		*(volatile uint8_t  *)0x4006C01B // UART 7816 Wait Parameter Register
#define UART2_WP7816T1		*(volatile uint8_t  *)0x4006C01B // UART 7816 Wait Parameter Register
#define UART2_WN7816		*(volatile uint8_t  *)0x4006C01C // UART 7816 Wait N Register
#define UART2_WF7816		*(volatile uint8_t  *)0x4006C01D // UART 7816 Wait FD Register
#define UART2_ET7816		*(volatile uint8_t  *)0x4006C01E // UART 7816 Error Threshold Register
#define UART2_TL7816		*(volatile uint8_t  *)0x4006C01F // UART 7816 Transmit Length Register
#define UART2_C6		*(volatile uint8_t  *)0x4006C021 // UART CEA709.1-B Control Register 6
#define UART2_PCTH		*(volatile uint8_t  *)0x4006C022 // UART CEA709.1-B Packet Cycle Time Counter High
#define UART2_PCTL		*(volatile uint8_t  *)0x4006C023 // UART CEA709.1-B Packet Cycle Time Counter Low
#define UART2_B1T		*(volatile uint8_t  *)0x4006C024 // UART CEA709.1-B Beta1 Timer
#define UART2_SDTH		*(volatile uint8_t  *)0x4006C025 // UART CEA709.1-B Secondary Delay Timer High
#define UART2_SDTL		*(volatile uint8_t  *)0x4006C026 // UART CEA709.1-B Secondary Delay Timer Low
#define UART2_PRE		*(volatile uint8_t  *)0x4006C027 // UART CEA709.1-B Preamble
#define UART2_TPL		*(volatile uint8_t  *)0x4006C028 // UART CEA709.1-B Transmit Packet Length
#define UART2_IE		*(volatile uint8_t  *)0x4006C029 // UART CEA709.1-B Interrupt Enable Register
#define UART2_WB		*(volatile uint8_t  *)0x4006C02A // UART CEA709.1-B WBASE
#define UART2_S3		*(volatile uint8_t  *)0x4006C02B // UART CEA709.1-B Status Register
#define UART2_S4		*(volatile uint8_t  *)0x4006C02C // UART CEA709.1-B Status Register
#define UART2_RPL		*(volatile uint8_t  *)0x4006C02D // UART CEA709.1-B Received Packet Length
#define UART2_RPREL		*(volatile uint8_t  *)0x4006C02E // UART CEA709.1-B Received Preamble Length
#define UART2_CPW		*(volatile uint8_t  *)0x4006C02F // UART CEA709.1-B Collision Pulse Width
#define UART2_RIDT		*(volatile uint8_t  *)0x4006C030 // UART CEA709.1-B Receive Indeterminate Time
#define UART2_TIDT		*(volatile uint8_t  *)0x4006C031 // UART CEA709.1-B Transmit Indeterminate Time

// Chapter 46: Synchronous Audio Interface (SAI)
#define I2S0_TCSR		*(volatile uint32_t *)0x4002F000 // SAI Transmit Control Register
#define I2S_TCSR_TE			(uint32_t)0x80000000	// Transmitter Enable
#define I2S_TCSR_STOPE			(uint32_t)0x40000000	// Transmitter Enable in Stop mode
#define I2S_TCSR_DBGE			(uint32_t)0x20000000	// Transmitter Enable in Debug mode
#define I2S_TCSR_BCE			(uint32_t)0x10000000	// Bit Clock Enable
#define I2S_TCSR_FR			(uint32_t)0x02000000	// FIFO Reset
#define I2S_TCSR_SR			(uint32_t)0x01000000	// Software Reset
#define I2S_TCSR_WSF			(uint32_t)0x00100000	// Word Start Flag
#define I2S_TCSR_SEF			(uint32_t)0x00080000	// Sync Error Flag
#define I2S_TCSR_FEF			(uint32_t)0x00040000	// FIFO Error Flag (underrun)
#define I2S_TCSR_FWF			(uint32_t)0x00020000	// FIFO Warning Flag (empty)
#define I2S_TCSR_FRF			(uint32_t)0x00010000	// FIFO Request Flag (Data Ready)
#define I2S_TCSR_WSIE			(uint32_t)0x00001000	// Word Start Interrupt Enable
#define I2S_TCSR_SEIE			(uint32_t)0x00000800	// Sync Error Interrupt Enable
#define I2S_TCSR_FEIE			(uint32_t)0x00000400	// FIFO Error Interrupt Enable
#define I2S_TCSR_FWIE			(uint32_t)0x00000200	// FIFO Warning Interrupt Enable
#define I2S_TCSR_FRIE			(uint32_t)0x00000100	// FIFO Request Interrupt Enable
#define I2S_TCSR_FWDE			(uint32_t)0x00000002	// FIFO Warning DMA Enable
#define I2S_TCSR_FRDE			(uint32_t)0x00000001	// FIFO Request DMA Enable
#define I2S0_TCR1		*(volatile uint32_t *)0x4002F004 // SAI Transmit Configuration 1 Register
#define I2S_TCR1_TFW(n)			((uint32_t)n & 0x03)	      // Transmit FIFO watermark
#define I2S0_TCR2		*(volatile uint32_t *)0x4002F008 // SAI Transmit Configuration 2 Register
#define I2S_TCR2_DIV(n)			((uint32_t)n & 0xff)	      // Bit clock divide by (DIV+1)*2
#define I2S_TCR2_BCD			((uint32_t)1<<24)	      // Bit clock direction
#define I2S_TCR2_BCP			((uint32_t)1<<25)	      // Bit clock polarity
#define I2S_TCR2_MSEL(n)		((uint32_t)(n & 3)<<26)	      // MCLK select, 0=bus clock, 1=I2S0_MCLK
#define I2S_TCR2_BCI			((uint32_t)1<<28)	      // Bit clock input
#define I2S_TCR2_BCS			((uint32_t)1<<29)	      // Bit clock swap
#define I2S_TCR2_SYNC(n)		((uint32_t)(n & 3)<<30)	      // 0=async 1=sync with receiver
#define I2S0_TCR3		*(volatile uint32_t *)0x4002F00C // SAI Transmit Configuration 3 Register
#define I2S_TCR3_WDFL(n)		((uint32_t)n & 0x0f)	      // word flag configuration
#define I2S_TCR3_TCE			((uint32_t)0x10000)	      // transmit channel enable
#define I2S0_TCR4		*(volatile uint32_t *)0x4002F010 // SAI Transmit Configuration 4 Register
#define I2S_TCR4_FSD			((uint32_t)1)		      // Frame Sync Direction
#define I2S_TCR4_FSP			((uint32_t)2)		      // Frame Sync Polarity
#define I2S_TCR4_FSE			((uint32_t)8)		      // Frame Sync Early
#define I2S_TCR4_MF			((uint32_t)0x10)	      // MSB First
#define I2S_TCR4_SYWD(n)		((uint32_t)(n & 0x1f)<<8)     // Sync Width
#define I2S_TCR4_FRSZ(n)		((uint32_t)(n & 0x0f)<<16)    // Frame Size
#define I2S0_TCR5		*(volatile uint32_t *)0x4002F014 // SAI Transmit Configuration 5 Register
#define I2S_TCR5_FBT(n)			((uint32_t)(n & 0x1f)<<8)     // First Bit Shifted
#define I2S_TCR5_W0W(n)			((uint32_t)(n & 0x1f)<<16)    // Word 0 Width
#define I2S_TCR5_WNW(n)			((uint32_t)(n & 0x1f)<<24)    // Word N Width
#define I2S0_TDR0		*(volatile uint32_t *)0x4002F020 // SAI Transmit Data Register
#define I2S0_TDR1		*(volatile uint32_t *)0x4002F024 // SAI Transmit Data Register
#define I2S0_TFR0		*(volatile uint32_t *)0x4002F040 // SAI Transmit FIFO Register
#define I2S0_TFR1		*(volatile uint32_t *)0x4002F044 // SAI Transmit FIFO Register
#define I2S_TFR_RFP(n)			((uint32_t)n & 7)	      // read FIFO pointer
#define I2S_TFR_WFP(n)			((uint32_t)(n & 7)<<16)	      // write FIFO pointer
#define I2S0_TMR		*(volatile uint32_t *)0x4002F060 // SAI Transmit Mask Register
#define I2S_TMR_TWM(n)			((uint32_t)n & 0xFFFFFFFF)
#define I2S0_RCSR		*(volatile uint32_t *)0x4002F080 // SAI Receive Control Register
#define I2S_RCSR_RE			(uint32_t)0x80000000	// Receiver Enable
#define I2S_RCSR_STOPE			(uint32_t)0x40000000	// Receiver Enable in Stop mode
#define I2S_RCSR_DBGE			(uint32_t)0x20000000	// Receiver Enable in Debug mode
#define I2S_RCSR_BCE			(uint32_t)0x10000000	// Bit Clock Enable
#define I2S_RCSR_FR			(uint32_t)0x02000000	// FIFO Reset
#define I2S_RCSR_SR			(uint32_t)0x01000000	// Software Reset
#define I2S_RCSR_WSF			(uint32_t)0x00100000	// Word Start Flag
#define I2S_RCSR_SEF			(uint32_t)0x00080000	// Sync Error Flag
#define I2S_RCSR_FEF			(uint32_t)0x00040000	// FIFO Error Flag (underrun)
#define I2S_RCSR_FWF			(uint32_t)0x00020000	// FIFO Warning Flag (empty)
#define I2S_RCSR_FRF			(uint32_t)0x00010000	// FIFO Request Flag (Data Ready)
#define I2S_RCSR_WSIE			(uint32_t)0x00001000	// Word Start Interrupt Enable
#define I2S_RCSR_SEIE			(uint32_t)0x00000800	// Sync Error Interrupt Enable
#define I2S_RCSR_FEIE			(uint32_t)0x00000400	// FIFO Error Interrupt Enable
#define I2S_RCSR_FWIE			(uint32_t)0x00000200	// FIFO Warning Interrupt Enable
#define I2S_RCSR_FRIE			(uint32_t)0x00000100	// FIFO Request Interrupt Enable
#define I2S_RCSR_FWDE			(uint32_t)0x00000002	// FIFO Warning DMA Enable
#define I2S_RCSR_FRDE			(uint32_t)0x00000001	// FIFO Request DMA Enable
#define I2S0_RCR1		*(volatile uint32_t *)0x4002F084 // SAI Receive Configuration 1 Register
#define I2S_RCR1_RFW(n)			((uint32_t)n & 0x03)	      // Receive FIFO watermark
#define I2S0_RCR2		*(volatile uint32_t *)0x4002F088 // SAI Receive Configuration 2 Register
#define I2S_RCR2_DIV(n)			((uint32_t)n & 0xff)	      // Bit clock divide by (DIV+1)*2
#define I2S_RCR2_BCD			((uint32_t)1<<24)	      // Bit clock direction
#define I2S_RCR2_BCP			((uint32_t)1<<25)	      // Bit clock polarity
#define I2S_RCR2_MSEL(n)		((uint32_t)(n & 3)<<26)	      // MCLK select, 0=bus clock, 1=I2S0_MCLK
#define I2S_RCR2_BCI			((uint32_t)1<<28)	      // Bit clock input
#define I2S_RCR2_BCS			((uint32_t)1<<29)	      // Bit clock swap
#define I2S_RCR2_SYNC(n)		((uint32_t)(n & 3)<<30)	      // 0=async 1=sync with receiver
#define I2S0_RCR3		*(volatile uint32_t *)0x4002F08C // SAI Receive Configuration 3 Register
#define I2S_RCR3_WDFL(n)		((uint32_t)n & 0x0f)	      // word flag configuration
#define I2S_RCR3_RCE			((uint32_t)0x10000)	      // receive channel enable
#define I2S0_RCR4		*(volatile uint32_t *)0x4002F090 // SAI Receive Configuration 4 Register
#define I2S_RCR4_FSD			((uint32_t)1)		      // Frame Sync Direction
#define I2S_RCR4_FSP			((uint32_t)2)		      // Frame Sync Polarity
#define I2S_RCR4_FSE			((uint32_t)8)		      // Frame Sync Early
#define I2S_RCR4_MF			((uint32_t)0x10)	      // MSB First
#define I2S_RCR4_SYWD(n)		((uint32_t)(n & 0x1f)<<8)     // Sync Width
#define I2S_RCR4_FRSZ(n)		((uint32_t)(n & 0x0f)<<16)    // Frame Size
#define I2S0_RCR5		*(volatile uint32_t *)0x4002F094 // SAI Receive Configuration 5 Register
#define I2S_RCR5_FBT(n)			((uint32_t)(n & 0x1f)<<8)     // First Bit Shifted
#define I2S_RCR5_W0W(n)			((uint32_t)(n & 0x1f)<<16)    // Word 0 Width
#define I2S_RCR5_WNW(n)			((uint32_t)(n & 0x1f)<<24)    // Word N Width
#define I2S0_RDR0		*(volatile uint32_t *)0x4002F0A0 // SAI Receive Data Register
#define I2S0_RDR1		*(volatile uint32_t *)0x4002F0A4 // SAI Receive Data Register
#define I2S0_RFR0		*(volatile uint32_t *)0x4002F0C0 // SAI Receive FIFO Register
#define I2S0_RFR1		*(volatile uint32_t *)0x4002F0C4 // SAI Receive FIFO Register
#define I2S_RFR_RFP(n)			((uint32_t)n & 7)	      // read FIFO pointer
#define I2S_RFR_WFP(n)			((uint32_t)(n & 7)<<16)	      // write FIFO pointer
#define I2S0_RMR		*(volatile uint32_t *)0x4002F0E0 // SAI Receive Mask Register
#define I2S_RMR_RWM(n)			((uint32_t)n & 0xFFFFFFFF)
#define I2S0_MCR		*(volatile uint32_t *)0x4002F100 // SAI MCLK Control Register
#define I2S_MCR_DUF			((uint32_t)1<<31)	      // Divider Update Flag
#define I2S_MCR_MOE			((uint32_t)1<<30)	      // MCLK Output Enable
#define I2S_MCR_MICS(n)			((uint32_t)(n & 3)<<24)	      // MCLK Input Clock Select
#define I2S0_MDR		*(volatile uint32_t *)0x4002F104 // SAI MCLK Divide Register
#define I2S_MDR_FRACT(n)		((uint32_t)(n & 0xff)<<12)    // MCLK Fraction
#define I2S_MDR_DIVIDE(n)		((uint32_t)(n & 0xfff))	      // MCLK Divide

// Chapter 47: General-Purpose Input/Output (GPIO)
#define GPIOA_PDOR		*(volatile uint32_t *)0x400FF000 // Port Data Output Register
#define GPIOA_PSOR		*(volatile uint32_t *)0x400FF004 // Port Set Output Register
#define GPIOA_PCOR		*(volatile uint32_t *)0x400FF008 // Port Clear Output Register
#define GPIOA_PTOR		*(volatile uint32_t *)0x400FF00C // Port Toggle Output Register
#define GPIOA_PDIR		*(volatile uint32_t *)0x400FF010 // Port Data Input Register
#define GPIOA_PDDR		*(volatile uint32_t *)0x400FF014 // Port Data Direction Register
#define GPIOB_PDOR		*(volatile uint32_t *)0x400FF040 // Port Data Output Register
#define GPIOB_PSOR		*(volatile uint32_t *)0x400FF044 // Port Set Output Register
#define GPIOB_PCOR		*(volatile uint32_t *)0x400FF048 // Port Clear Output Register
#define GPIOB_PTOR		*(volatile uint32_t *)0x400FF04C // Port Toggle Output Register
#define GPIOB_PDIR		*(volatile uint32_t *)0x400FF050 // Port Data Input Register
#define GPIOB_PDDR		*(volatile uint32_t *)0x400FF054 // Port Data Direction Register
#define GPIOC_PDOR		*(volatile uint32_t *)0x400FF080 // Port Data Output Register
#define GPIOC_PSOR		*(volatile uint32_t *)0x400FF084 // Port Set Output Register
#define GPIOC_PCOR		*(volatile uint32_t *)0x400FF088 // Port Clear Output Register
#define GPIOC_PTOR		*(volatile uint32_t *)0x400FF08C // Port Toggle Output Register
#define GPIOC_PDIR		*(volatile uint32_t *)0x400FF090 // Port Data Input Register
#define GPIOC_PDDR		*(volatile uint32_t *)0x400FF094 // Port Data Direction Register
#define GPIOD_PDOR		*(volatile uint32_t *)0x400FF0C0 // Port Data Output Register
#define GPIOD_PSOR		*(volatile uint32_t *)0x400FF0C4 // Port Set Output Register
#define GPIOD_PCOR		*(volatile uint32_t *)0x400FF0C8 // Port Clear Output Register
#define GPIOD_PTOR		*(volatile uint32_t *)0x400FF0CC // Port Toggle Output Register
#define GPIOD_PDIR		*(volatile uint32_t *)0x400FF0D0 // Port Data Input Register
#define GPIOD_PDDR		*(volatile uint32_t *)0x400FF0D4 // Port Data Direction Register
#define GPIOE_PDOR		*(volatile uint32_t *)0x400FF100 // Port Data Output Register
#define GPIOE_PSOR		*(volatile uint32_t *)0x400FF104 // Port Set Output Register
#define GPIOE_PCOR		*(volatile uint32_t *)0x400FF108 // Port Clear Output Register
#define GPIOE_PTOR		*(volatile uint32_t *)0x400FF10C // Port Toggle Output Register
#define GPIOE_PDIR		*(volatile uint32_t *)0x400FF110 // Port Data Input Register
#define GPIOE_PDDR		*(volatile uint32_t *)0x400FF114 // Port Data Direction Register

// Chapter 48: Touch sense input (TSI)
#define TSI0_GENCS		*(volatile uint32_t *)0x40045000 // General Control and Status Register
#define TSI_GENCS_LPCLKS		(uint32_t)0x10000000		// 
#define TSI_GENCS_LPSCNITV(n)		(((n) & 15) << 24)		// 
#define TSI_GENCS_NSCN(n)		(((n) & 31) << 19)		// 
#define TSI_GENCS_PS(n)			(((n) & 7) << 16)		// 
#define TSI_GENCS_EOSF			(uint32_t)0x00008000		// 
#define TSI_GENCS_OUTRGF		(uint32_t)0x00004000		// 
#define TSI_GENCS_EXTERF		(uint32_t)0x00002000		// 
#define TSI_GENCS_OVRF			(uint32_t)0x00001000		// 
#define TSI_GENCS_SCNIP			(uint32_t)0x00000200		// 
#define TSI_GENCS_SWTS			(uint32_t)0x00000100		// 
#define TSI_GENCS_TSIEN			(uint32_t)0x00000080		// 
#define TSI_GENCS_TSIIE			(uint32_t)0x00000040		// 
#define TSI_GENCS_ERIE			(uint32_t)0x00000020		// 
#define TSI_GENCS_ESOR			(uint32_t)0x00000010		// 
#define TSI_GENCS_STM			(uint32_t)0x00000002		// 
#define TSI_GENCS_STPE			(uint32_t)0x00000001		// 
#define TSI0_SCANC		*(volatile uint32_t *)0x40045004 // SCAN Control Register
#define TSI_SCANC_REFCHRG(n)		(((n) & 15) << 24)		// 
#define TSI_SCANC_EXTCHRG(n)		(((n) & 7) << 16)		// 
#define TSI_SCANC_SMOD(n)		(((n) & 255) << 8)		// 
#define TSI_SCANC_AMCLKS(n)		(((n) & 3) << 3)		// 
#define TSI_SCANC_AMPSC(n)		(((n) & 7) << 0)		// 
#define TSI0_PEN		*(volatile uint32_t *)0x40045008 // Pin Enable Register
#define TSI0_WUCNTR		*(volatile uint32_t *)0x4004500C // Wake-Up Channel Counter Register
#define TSI0_CNTR1		*(volatile uint32_t *)0x40045100 // Counter Register
#define TSI0_CNTR3		*(volatile uint32_t *)0x40045104 // Counter Register
#define TSI0_CNTR5		*(volatile uint32_t *)0x40045108 // Counter Register
#define TSI0_CNTR7		*(volatile uint32_t *)0x4004510C // Counter Register
#define TSI0_CNTR9		*(volatile uint32_t *)0x40045110 // Counter Register
#define TSI0_CNTR11		*(volatile uint32_t *)0x40045114 // Counter Register
#define TSI0_CNTR13		*(volatile uint32_t *)0x40045118 // Counter Register
#define TSI0_CNTR15		*(volatile uint32_t *)0x4004511C // Counter Register
#define TSI0_THRESHOLD		*(volatile uint32_t *)0x40045120 // Low Power Channel Threshold Register

// Nested Vectored Interrupt Controller, Table 3-4 & ARMv7 ref, appendix B3.4 (page 750)
#define NVIC_ENABLE_IRQ(n)	(*((volatile uint32_t *)0xE000E100 + (n >> 5)) = (1 << (n & 31)))
#define NVIC_DISABLE_IRQ(n)	(*((volatile uint32_t *)0xE000E180 + (n >> 5)) = (1 << (n & 31)))
#define NVIC_SET_PENDING(n)	(*((volatile uint32_t *)0xE000E200 + (n >> 5)) = (1 << (n & 31)))
#define NVIC_CLEAR_PENDING(n)	(*((volatile uint32_t *)0xE000E280 + (n >> 5)) = (1 << (n & 31)))

#define NVIC_ISER0		*(volatile uint32_t *)0xE000E100
#define NVIC_ISER1		*(volatile uint32_t *)0xE000E104
#define NVIC_ICER0		*(volatile uint32_t *)0xE000E180
#define NVIC_ICER1		*(volatile uint32_t *)0xE000E184

// 0 = highest priority
// Cortex-M4: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240
// Cortex-M0: 0,64,128,192
#define NVIC_SET_PRIORITY(irqnum, priority)  (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority))
#define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum)))

#if defined(__MK20DX128__)
#define IRQ_DMA_CH0		0
#define IRQ_DMA_CH1		1
#define IRQ_DMA_CH2		2
#define IRQ_DMA_CH3		3
#define IRQ_DMA_ERROR		4
#define IRQ_FTFL_COMPLETE	6
#define IRQ_FTFL_COLLISION	7
#define IRQ_LOW_VOLTAGE		8
#define IRQ_LLWU		9
#define IRQ_WDOG		10
#define IRQ_I2C0		11
#define IRQ_SPI0		12
#define IRQ_I2S0_TX		13
#define IRQ_I2S0_RX		14
#define IRQ_UART0_LON		15
#define IRQ_UART0_STATUS	16
#define IRQ_UART0_ERROR		17
#define IRQ_UART1_STATUS	18
#define IRQ_UART1_ERROR		19
#define IRQ_UART2_STATUS	20
#define IRQ_UART2_ERROR		21
#define IRQ_ADC0		22
#define IRQ_CMP0		23
#define IRQ_CMP1		24
#define IRQ_FTM0		25
#define IRQ_FTM1		26
#define IRQ_CMT			27
#define IRQ_RTC_ALARM		28
#define IRQ_RTC_SECOND		29
#define IRQ_PIT_CH0		30
#define IRQ_PIT_CH1		31
#define IRQ_PIT_CH2		32
#define IRQ_PIT_CH3		33
#define IRQ_PDB			34
#define IRQ_USBOTG		35
#define IRQ_USBDCD		36
#define IRQ_TSI			37
#define IRQ_MCG			38
#define IRQ_LPTMR		39
#define IRQ_PORTA		40
#define IRQ_PORTB		41
#define IRQ_PORTC		42
#define IRQ_PORTD		43
#define IRQ_PORTE		44
#define IRQ_SOFTWARE		45
#define NVIC_NUM_INTERRUPTS	46

#elif defined(__MK20DX256__)
#define IRQ_DMA_CH0		0
#define IRQ_DMA_CH1		1
#define IRQ_DMA_CH2		2
#define IRQ_DMA_CH3		3
#define IRQ_DMA_CH4		4
#define IRQ_DMA_CH5		5
#define IRQ_DMA_CH6		6
#define IRQ_DMA_CH7		7
#define IRQ_DMA_CH8		8
#define IRQ_DMA_CH9		9
#define IRQ_DMA_CH10		10
#define IRQ_DMA_CH11		11
#define IRQ_DMA_CH12		12
#define IRQ_DMA_CH13		13
#define IRQ_DMA_CH14		14
#define IRQ_DMA_CH15		15
#define IRQ_DMA_ERROR		16
#define IRQ_FTFL_COMPLETE	18
#define IRQ_FTFL_COLLISION	19
#define IRQ_LOW_VOLTAGE		20
#define IRQ_LLWU		21
#define IRQ_WDOG		22
#define IRQ_I2C0		24
#define IRQ_I2C1		25
#define IRQ_SPI0		26
#define IRQ_SPI1		27
#define IRQ_CAN_MESSAGE		29
#define IRQ_CAN_BUS_OFF		30
#define IRQ_CAN_ERROR		31
#define IRQ_CAN_TX_WARN		32
#define IRQ_CAN_RX_WARN		33
#define IRQ_CAN_WAKEUP		34
#define IRQ_I2S0_TX		35
#define IRQ_I2S0_RX		36
#define IRQ_UART0_LON		44
#define IRQ_UART0_STATUS	45
#define IRQ_UART0_ERROR		46
#define IRQ_UART1_STATUS	47
#define IRQ_UART1_ERROR		48
#define IRQ_UART2_STATUS	49
#define IRQ_UART2_ERROR		50
#define IRQ_ADC0		57
#define IRQ_ADC1		58
#define IRQ_CMP0		59
#define IRQ_CMP1		60
#define IRQ_CMP2		61
#define IRQ_FTM0		62
#define IRQ_FTM1		63
#define IRQ_FTM2		64
#define IRQ_CMT			65
#define IRQ_RTC_ALARM		66
#define IRQ_RTC_SECOND		67
#define IRQ_PIT_CH0		68
#define IRQ_PIT_CH1		69
#define IRQ_PIT_CH2		70
#define IRQ_PIT_CH3		71
#define IRQ_PDB			72
#define IRQ_USBOTG		73
#define IRQ_USBDCD		74
#define IRQ_DAC0		81
#define IRQ_TSI			83
#define IRQ_MCG			84
#define IRQ_LPTMR		85
#define IRQ_PORTA		87
#define IRQ_PORTB		88
#define IRQ_PORTC		89
#define IRQ_PORTD		90
#define IRQ_PORTE		91
#define IRQ_SOFTWARE		94
#define NVIC_NUM_INTERRUPTS	95

#endif





#define __disable_irq() asm volatile("CPSID i");
#define __enable_irq()	asm volatile("CPSIE i");

// System Control Space (SCS), ARMv7 ref manual, B3.2, page 708
#define SCB_CPUID		*(const	   uint32_t *)0xE000ED00 // CPUID Base Register
#define SCB_ICSR		*(volatile uint32_t *)0xE000ED04 // Interrupt Control and State
#define SCB_ICSR_PENDSTSET		(uint32_t)0x04000000
#define SCB_VTOR		*(volatile uint32_t *)0xE000ED08 // Vector Table Offset
#define SCB_AIRCR		*(volatile uint32_t *)0xE000ED0C // Application Interrupt and Reset Control
#define SCB_SCR			*(volatile uint32_t *)0xE000ED10 // System Control Register
#define SCB_CCR			*(volatile uint32_t *)0xE000ED14 // Configuration and Control
#define SCB_SHPR1		*(volatile uint32_t *)0xE000ED18 // System Handler Priority Register 1
#define SCB_SHPR2		*(volatile uint32_t *)0xE000ED1C // System Handler Priority Register 2
#define SCB_SHPR3		*(volatile uint32_t *)0xE000ED20 // System Handler Priority Register 3
#define SCB_SHCSR		*(volatile uint32_t *)0xE000ED24 // System Handler Control and State
#define SCB_CFSR		*(volatile uint32_t *)0xE000ED28 // Configurable Fault Status Register
#define SCB_HFSR		*(volatile uint32_t *)0xE000ED2C // HardFault Status
#define SCB_DFSR		*(volatile uint32_t *)0xE000ED30 // Debug Fault Status
#define SCB_MMFAR		*(volatile uint32_t *)0xE000ED34 // MemManage Fault Address

#define SYST_CSR		*(volatile uint32_t *)0xE000E010 // SysTick Control and Status
#define SYST_CSR_COUNTFLAG		(uint32_t)0x00010000
#define SYST_CSR_CLKSOURCE		(uint32_t)0x00000004
#define SYST_CSR_TICKINT		(uint32_t)0x00000002
#define SYST_CSR_ENABLE			(uint32_t)0x00000001
#define SYST_RVR		*(volatile uint32_t *)0xE000E014 // SysTick Reload Value Register
#define SYST_CVR		*(volatile uint32_t *)0xE000E018 // SysTick Current Value Register
#define SYST_CALIB		*(const	   uint32_t *)0xE000E01C // SysTick Calibration Value


#define ARM_DEMCR		*(volatile uint32_t *)0xE000EDFC // Debug Exception and Monitor Control
#define ARM_DEMCR_TRCENA		(1 << 24)	 // Enable debugging & monitoring blocks
#define ARM_DWT_CTRL		*(volatile uint32_t *)0xE0001000 // DWT control register
#define ARM_DWT_CTRL_CYCCNTENA		(1 << 0)		// Enable cycle count
#define ARM_DWT_CYCCNT		*(volatile uint32_t *)0xE0001004 // Cycle count register

extern int nvic_execution_priority(void);

extern void nmi_isr(void);
extern void hard_fault_isr(void);
extern void memmanage_fault_isr(void);
extern void bus_fault_isr(void);
extern void usage_fault_isr(void);
extern void svcall_isr(void);
extern void debugmonitor_isr(void);
extern void pendablesrvreq_isr(void);
extern void systick_isr(void);
extern void dma_ch0_isr(void);
extern void dma_ch1_isr(void);
extern void dma_ch2_isr(void);
extern void dma_ch3_isr(void);
extern void dma_ch4_isr(void);
extern void dma_ch5_isr(void);
extern void dma_ch6_isr(void);
extern void dma_ch7_isr(void);
extern void dma_ch8_isr(void);
extern void dma_ch9_isr(void);
extern void dma_ch10_isr(void);
extern void dma_ch11_isr(void);
extern void dma_ch12_isr(void);
extern void dma_ch13_isr(void);
extern void dma_ch14_isr(void);
extern void dma_ch15_isr(void);
extern void dma_error_isr(void);
extern void mcm_isr(void);
extern void flash_cmd_isr(void);
extern void flash_error_isr(void);
extern void low_voltage_isr(void);
extern void wakeup_isr(void);
extern void watchdog_isr(void);
extern void i2c0_isr(void);
extern void i2c1_isr(void);
extern void i2c2_isr(void);
extern void spi0_isr(void);
extern void spi1_isr(void);
extern void spi2_isr(void);
extern void sdhc_isr(void);
extern void can0_message_isr(void);
extern void can0_bus_off_isr(void);
extern void can0_error_isr(void);
extern void can0_tx_warn_isr(void);
extern void can0_rx_warn_isr(void);
extern void can0_wakeup_isr(void);
extern void i2s0_tx_isr(void);
extern void i2s0_rx_isr(void);
extern void uart0_lon_isr(void);
extern void uart0_status_isr(void);
extern void uart0_error_isr(void);
extern void uart1_status_isr(void);
extern void uart1_error_isr(void);
extern void uart2_status_isr(void);
extern void uart2_error_isr(void);
extern void uart3_status_isr(void);
extern void uart3_error_isr(void);
extern void uart4_status_isr(void);
extern void uart4_error_isr(void);
extern void uart5_status_isr(void);
extern void uart5_error_isr(void);
extern void adc0_isr(void);
extern void adc1_isr(void);
extern void cmp0_isr(void);
extern void cmp1_isr(void);
extern void cmp2_isr(void);
extern void ftm0_isr(void);
extern void ftm1_isr(void);
extern void ftm2_isr(void);
extern void ftm3_isr(void);
extern void cmt_isr(void);
extern void rtc_alarm_isr(void);
extern void rtc_seconds_isr(void);
extern void pit0_isr(void);
extern void pit1_isr(void);
extern void pit2_isr(void);
extern void pit3_isr(void);
extern void pdb_isr(void);
extern void usb_isr(void);
extern void usb_charge_isr(void);
extern void dac0_isr(void);
extern void dac1_isr(void);
extern void tsi0_isr(void);
extern void mcg_isr(void);
extern void lptmr_isr(void);
extern void porta_isr(void);
extern void portb_isr(void);
extern void portc_isr(void);
extern void portd_isr(void);
extern void porte_isr(void);
extern void software_isr(void);



#ifdef __cplusplus
}
#endif
#endif