NZBtoMedia

What is NZBtoMedia.?

NZBtoMedia is a collection of scripts for post-processing.
Normally SickRage scans the download folder for new files/downloads every 10 minutes. However that prevents the hard disks from going into sleep/hibernation. Scripts on the other hand let SickRage instantly know if a download was completed. Therefore the scanning of the tv download folder isn't necessary anymore. Another advantage is that other post-processing options can be done, before the file is sent to Sickrage. But most of those options are already included in SickRage, so you probably wont use them. Last and probably the MOST important reason, it supports failed downloads. Meaning that when your client fails to download the file a notification gets sent to SickRage and a new search gets started, with hopefully now a valid file.

• NOTE: Windows users will need to install the pywin32 extensions to run NZBtoMedia. There are 64-bit and 32-bit versions of the extensions available, and the installer will automatically detect the version you have only if you have downloaded the installer that corresponds to your python interpreter version.

With what client can i use NZBtoMedia.?

With every client that allows to run a script after the download. Most famous is probably SABnzbd, but also Synology's Download Station and Transmission support this. For more info see NZBtoMedia's Repo

In case you are still using SABnzbd than consider switching to NZBget, as it has the NZBtoMedia scripts already build-in.

How to setup NZBtoMedia with NZBget.?

The good news is that NZBget has the NZBtoMedia scripts build-in to the program. This allows for easy configuration.

• Note: Make sure you enable in SickRage Settings --> General --> Post-Processing --> Use Failed Downloads !

==

Go to CATEGORIES in the Settings. Push on Add another categorieat the bottom of the page to add a new categorie. (or re-use an already existing categorie)

• Under name add tv
• Under Postscript chose nzbToSickBeard

And save the settings.

==

Next we need to setup the settings for the nzbToSickBeard script itself.
Go to nzbToSickBeard in the Setting. Now change/add :

• sbcategory leave set to tv (or change if you changed it in SickRage.)
• sbhost leave to localhost (or enter IP if Sickrage runs on different machine)
• sbport Enter the port on witch SickRage is running.
• sbusername Enter the username if SickRage requires login.
• sbpassword Enter the password if SickRage requires login.
• sbprocess_method Use your preferred process method.

(more advanced settings can be set, but make sure you understand there functions.!)

And save the settings.

==

By default NZBget will create a sub-directory with the name of the category. And some users might not like that. To change this go to INCOMING NZBS under settings and set appendedcategorydir to NO

And save the settings.

How to setup NZBtoMedia with SABnzbd.?

If you are lucky you might already be familiar with the SABtoSickbeard script. The setup is almost identical to that.
But first we need to configure the autoProcessMedia.cfg to include your user-name/passwords/ip/port etc.

( SABtoSickbeard works but is outdated and doesn't support automated failed downloads.)

• Note1: Make sure you enable in SickRage Settings --> General --> Post-Processing --> Use Failed Downloads !
• Note2: Make sure Sickrage and Sabnzbd have access/correct permissions in the nzbtomedia folder.

==

Configure autoProcessMedia.cfg for SABnzbd

First locate your contrib folder where NZBtoMedia is located, or download/install it on a location you prefer. Included in the NZBtoMedia folder is a file called autoProcessMedia.cfg.spec.
Copy the autoProcessMedia.cfg.spec file and rename it to autoProcessMedia.cfg in the same folder. Now open the autoProcessMedia.cfg with your favorite editor.

Go to the [SickBeard] section and add/change the following settings. :

[SickBeard]

• enabled = 0 (Change the 0 to 1 to enable Sickrage)
• host = localhost (Change IP number if Sickrage runs on a different device)
• port = 8081 (Change the port to the one that your SickRage install uses)
• username = (Add your username if you have enabled login in Sickrage)
• password = (Add your password if you have enabled login in Sickrage)
• fork = (Only replace auto with sickrageif detection problems)

Go to the [Nzb] section and add/change the following settings. :

[Nzb]

• clientAgent = sabnzbd (Add sabnzbd)
• sabnzbd_host = localhost (Change/add the IP number if needed)
• sabnzbd_port = 8081 (Change the port if needed)
• sabnzbd_apikey = (Add the API key of sabnzbd)
• default_downloadDirectory = "/downloads" (add your tv download dir)

(Note: There are more advanced settings that you can modify, but they are not needed in most cases.)

Thats it. Now save the file.

Configure nzbtosickbeard.py with SABnzbd

First step is to let SABnzbd know where the NZBtoMedia scripts are located.
Do this by going to. : Config -> Folders -> User Folders -> Post-Processing Scripts Folder
Now browse to the location where they are located and save the new path.

==

The second step is to setup the categories. When SickRage sends an nzb to SABnzbd it adds a tag. the defealt is tv. The Categories allow to run a script when a certain tag is sent/found by SABnzbd.
In our case we want to do this with the tag tv that SickRage uses.
Go to : Config -> Categories

See if there is already a category called tv and if not create one.
Than select in the Script column "nzbToSickBeard.py" as the script needs to be executed after the file was downloaded by SABnzbd. (In case there are no scripts the select, than make sure you have sett the correct scripts folder mentioned in the previous step.)

The "Folder/Path" doesn't need to be set, but if you are having problems than set to the location where you want your movies extracted to (Usually just set this as tv to move files to a tv sub-directory in the download completed directory)

==

The next steps are not necessary but recommended.

Go to : Config -> Switches -> Post-Process Only Verified Jobs (off)
And deselect, in order to allow for snatching of the next best release. (mainly used with CouchPotatoServer if a download fails.)

==

With the release of SABnzbd version 0.7.5 a new special parameter named "empty_postproc" was introduced. This allows for better handling of failed downloads.
Go to : Config -> Special -> empty_postproc (on)
And change the setting to off.

==

A successful run of the script should look like this in SABnzbd. :