- PDS API version 4.1 is required for FW 3.5.0
- Added external PA configuration section (only in template and definition files)
- TEST_IND type defined as unsigned word - min value set to 50 (only in template and definition files)
- PDS API version 4.0 is required for FW 3.2.0
- HIF_PINS_CFG / SDIO_* / SLEEP_CFG : by default no pulls are set
- HIF_PINS_CFG / SDIO_* / PULL_UP_DOWN : by default no pulls are set.
- FEM matrix configuration simplified
- FRONT_END_LOSS_CORRECTION_QDB renamed as FRONT_END_LOSS_TX_QDB (value in 1/4dB)
- RSSI_CORRECTION renamed as FRONT_END_LOSS_RX_QDB (value in 1/4dB)
- PDS API version 3.0 is required for FW 3.0.0
- Removed PTA_CFG section (PTA is now controlled via FW API)
- PDS API version 2.4 is required for FW 2.2.3
- PTA API updates (new fields). NB: PTA section commented/disabled in pds.in files
- PDS API version 2.3 is required for FW 2.2.2
- MAX_TX_POWER_CFG section renamed to RF_POWER_CFG
- RSSI_CORRECTION field is added in RF_POWER_CFG section to take into account the loss on the RF path in RSSI estimation.
- REG_MODE (Regulatory modes) enumerates have been renamed for better clarity (TEST_FEATURE_CFG section)
- correction of a mistake in Version 2.2 where all PTA_TX_CONF were renamed to PTA_TX_CFG. The new name is PTA_TX_CONF (as in the data sheet).
- PDS version 2.2 is required for FW 2.2.0 and 2.2.1
- General: Cosmetic changes on names: 1) _ELT, removed, 2) _CONF suffixes renames to _CFG 3) sections re-ordered
- FEM: 1) merged FEM_CTRL_PINS_MATRIX and FEM_TIMINGS sections into a new FEM_CFG section, 2) bits FEM_5 & FEM_6 swapped for better clarity
- PTA: enable configuration into 1-wire and 2-wire PTA modes
- typos fixed
- PDS version 2.1 is required for FW 2.1.0
- General: top-level braces removed to allow PDS includes
- programmable pins: 1) SLEEP_CFG:
tri
enumerate changed tonone
, 2) the mode for all pins is set totri
- RF_ANTENNA_SEL_DIV_CONF: RF_PORTS
TX1&2_RX1&2
enumerate value is renamed toTX12_RX12
- REG_MODE added in TEST_FEATURE_CFG section to configure Tx power upon regulations.
- PTA: now disabled by default
- PDS version 2.0 is the initial delivery, to work with FW 2.0.0