SlicerConfig.cmake.in

#
# This file has been primarly designed for the purpose of Slicer extension development.
#
# This file is configured by Slicer and used by UseSlicer.cmake module
# to load Slicer's settings for an external project. External projects
# can use these setting to build new modules against a Slicer build tree.
#
#

#
# When manually building extension on MacOSX, in addition to the usual configure
# option (CMAKE_BUILD_TYPE, ...), the developer is also expected to
# configure it passing the variables:
#   CMAKE_OSX_ARCHITECTURES
#   CMAKE_OSX_DEPLOYMENT_TARGET
#   CMAKE_OSX_SYSROOT
# The value of these variables should match the one used to
# configure the associated Slicer build tree. These values can be
# retrieved looking at the CMakeCache.txt file located in the Slicer
# build tree.
#
# To simplify the task of manually building out-of-source modules or extensions,
# the developer could include the following statement at the top of both the main
# CMakeLists.txt of the extension and also at the top of each module CMakeLists.txt
# bundled within the extension.
# Doing so will ensure that either the extension or each bundled module could be
# built in a standalone fashion very easily without passing extra option
# at configure time:
#
#  find_package(Slicer COMPONENTS ConfigurePrerequisites REQUIRED)
#
#  project(Foo)
#
#  [...]
#
#  find_package(Slicer REQUIRED)
#  include(${Slicer_USE_FILE})
#  [...]


# Extension support can be disabled by either
#  (1) setting Slicer_DONT_USE_EXTENSION to TRUE or
#  (2) calling find_package(Slicer COMPONENTS NoExtensionSupport [...] REQUIRED)


# --------------------------------------------------------------------------
#  COMPONENTS                | CMAKE VARIABLE(S)
# --------------------------------------------------------------------------
#  NoExtensionSupport        | Slicer_USE_NOEXTENSIONSUPPORT
#                            | Slicer_DONT_USE_EXTENSION
# --------------------------------------------------------------------------
#  ConfigurePrerequisites    | Slicer_USE_CONFIGUREPREREQUISITES
# --------------------------------------------------------------------------

foreach(component NoExtensionSupport ConfigurePrerequisites)
  string(TOUPPER ${component} _COMPONENT)
  set(Slicer_USE_${_COMPONENT} 0)
endforeach()

if(Slicer_FIND_COMPONENTS)
  foreach(component ${Slicer_FIND_COMPONENTS})
    string(TOUPPER ${component} _COMPONENT)
    set(Slicer_USE_${_COMPONENT} 1)
  endforeach()

  set(Slicer_DONT_USE_EXTENSION ${Slicer_USE_NOEXTENSIONSUPPORT})
endif()

if(NOT DEFINED Slicer_DONT_USE_EXTENSION)
  set(Slicer_DONT_USE_EXTENSION FALSE)
endif()

if(NOT DEFINED Slicer_USE_CONFIGUREPREREQUISITES)
  set(Slicer_USE_CONFIGUREPREREQUISITES FALSE)
endif()

if(Slicer_SOURCE_DIR)
  return()
endif()

# --------------------------------------------------------------------------
set(Slicer_CMAKE_DIR "@Slicer_CMAKE_DIR@")
set(Slicer_EXTENSIONS_CMAKE_DIR "@Slicer_EXTENSIONS_CMAKE_DIR@")

# Update CMAKE_MODULE_PATH
set(CMAKE_MODULE_PATH
  ${Slicer_CMAKE_DIR}
  ${Slicer_EXTENSIONS_CMAKE_DIR}
  ${CMAKE_MODULE_PATH}
  )

# --------------------------------------------------------------------------
if(Slicer_USE_CONFIGUREPREREQUISITES)
  if(NOT Slicer_PREREQUISITES_CONFIGURED)
    if(DEFINED CMAKE_PROJECT_NAME)
      message(FATAL_ERROR
        "To be effective, 'find_package(Slicer COMPONENTS ConfigurePrerequisites)' should "
        "be placed before any calls to 'project()' or 'enable_language()'."
        "Before re-configuring, make sure to clean the build directory: ${CMAKE_CURRENT_BINARY_DIR}"
        )
    endif()
    # Note: By setting CMAKE_OSX_* variables before any enable_language() or project() calls,
    #       we ensure that the bitness will be properly detected.
    include(SlicerBlockSetCMakeOSXVariables)
    set(Slicer_PREREQUISITES_CONFIGURED 1 CACHE INTERNAL "True if component 'ConfigurePrerequisites' has already been included")
  endif()
  return()
endif()

# --------------------------------------------------------------------------
# Slicer options
# --------------------------------------------------------------------------
set(Slicer_USE_NUMPY "@Slicer_USE_NUMPY@")
set(Slicer_USE_OpenIGTLink "@Slicer_USE_OpenIGTLink@")
set(Slicer_USE_PYTHONQT "@Slicer_USE_PYTHONQT@")
set(Slicer_USE_PYTHONQT_WITH_TCL "@Slicer_USE_PYTHONQT_WITH_TCL@")
set(Slicer_USE_QtTesting "@Slicer_USE_QtTesting@")
set(Slicer_USE_SimpleITK "@Slicer_USE_SimpleITK@")
set(Slicer_BUILD_CLI_SUPPORT "@Slicer_BUILD_CLI_SUPPORT@")
set(Slicer_BUILD_DICOM_SUPPORT "@Slicer_BUILD_DICOM_SUPPORT@")
set(Slicer_BUILD_DIFFUSION_SUPPORT "@Slicer_BUILD_DIFFUSION_SUPPORT@")
set(Slicer_BUILD_EXTENSIONMANAGER_SUPPORT "@Slicer_BUILD_EXTENSIONMANAGER_SUPPORT@")
set(Slicer_BUILD_TESTING "@BUILD_TESTING@")

set(Slicer_REQUIRED_QT_VERSION "@Slicer_REQUIRED_QT_VERSION@")
set(Slicer_REQUIRED_QT_MODULES "@Slicer_REQUIRED_QT_MODULES@")

# Launcher command
set(Slicer_LAUNCHER_EXECUTABLE "@Slicer_LAUNCHER_EXECUTABLE_CONFIG@")
set(Slicer_LAUNCH_COMMAND "@Slicer_LAUNCH_COMMAND_CONFIG@")
set(SEM_LAUNCH_COMMAND "@Slicer_LAUNCH_COMMAND_CONFIG@")

# Slicer working copy Revision, URL and Root
set(Slicer_WC_REVISION "@Slicer_WC_REVISION@")
set(Slicer_WC_URL "@Slicer_WC_URL@")
set(Slicer_WC_ROOT "@Slicer_WC_ROOT@")

# Slicer os and architecture
set(Slicer_OS "@Slicer_OS@")
set(Slicer_ARCHITECTURE "@Slicer_ARCHITECTURE@")

# Slicer main application
set(Slicer_MAIN_PROJECT "@Slicer_MAIN_PROJECT@")
set(Slicer_MAIN_PROJECT_APPLICATION_NAME "@Slicer_MAIN_PROJECT_APPLICATION_NAME@")

# License and Readme file
set(Slicer_LICENSE_FILE "@Slicer_LICENSE_FILE_CONFIG@")
set(Slicer_README_FILE "@Slicer_README_FILE_CONFIG@")

# Test templates directory
set(Slicer_CXX_MODULE_TEST_TEMPLATES_DIR "@Slicer_CXX_MODULE_TEST_TEMPLATES_DIR_CONFIG@")
set(Slicer_PYTHON_MODULE_TEST_TEMPLATES_DIR "@Slicer_PYTHON_MODULE_TEST_TEMPLATES_DIR_CONFIG@")

# Path to extension CPack script
set(Slicer_EXTENSION_CPACK "@Slicer_EXTENSION_CPACK_CONFIG@")
set(Slicer_EXTENSION_CPACK_BUNDLE_FIXUP "@Slicer_EXTENSION_CPACK_BUNDLE_FIXUP_CONFIG@")
set(Slicer_EXTENSIONS_DIRNAME "@Slicer_EXTENSIONS_DIRNAME@")

# Whether Slicer was built with modules and CLI support.
set(Slicer_BUILD_CLI "@Slicer_BUILD_CLI@")
set(Slicer_BUILD_QTLOADABLEMODULES "@Slicer_BUILD_QTLOADABLEMODULES@")
set(Slicer_BUILD_QTSCRIPTEDMODULES "@Slicer_BUILD_QTSCRIPTEDMODULES@")

# Whether Slicer was built with shared libraries.
set(Slicer_BUILD_SHARED "@BUILD_SHARED_LIBS@")
set(Slicer_LIBRARY_PROPERTIES "@Slicer_LIBRARY_PROPERTIES@")

# Export header for BuildModuleLogic and BuildQTModule
set(Slicer_EXPORT_HEADER_TEMPLATE "@Slicer_EXPORT_HEADER_TEMPLATE@")
set(Slicer_LOGOS_RESOURCE "@Slicer_LOGOS_RESOURCE@")

# Slicer home (top of the tree)
set(Slicer_HOME "@Slicer_HOME@")

# Slicer Core library
set(Slicer_CORE_LIBRARY @Slicer_CORE_LIBRARY_CONFIG@)

# Slicer GUI library
set(Slicer_GUI_LIBRARY @Slicer_GUI_LIBRARY_CONFIG@)

# MRML libraries - This variable regroup all related MRML libraries
set(MRML_LIBRARIES @MRML_LIBRARIES@)

# Slicer Libs VTK wrapped libraries
set(Slicer_Libs_VTK_WRAPPED_LIBRARIES "@Slicer_Libs_VTK_WRAPPED_LIBRARIES@")

# Slicer include directories for module
@Slicer_INCLUDE_MODULE_DIRS_CONFIG@

# Slicer include directories for module logic
@Slicer_INCLUDE_MODULE_LOGIC_DIRS_CONFIG@

# Slicer include directories for module mrml
@Slicer_INCLUDE_MODULE_MRML_DIRS_CONFIG@

# Slicer include directories for module Widget
@Slicer_INCLUDE_MODULE_WIDGET_DIRS_CONFIG@

# Slicer Libs include file directories.
set(Slicer_Libs_INCLUDE_DIRS "@Slicer_Libs_INCLUDE_DIRS_CONFIG@")

# Slicer Base include file directories.
set(Slicer_Base_INCLUDE_DIRS "@Slicer_BINARY_DIR@" "@Slicer_Base_INCLUDE_DIRS_CONFIG@")

# Slicer Module logic include file directories.
set(Slicer_ModuleLogic_INCLUDE_DIRS "@Slicer_ModuleLogic_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "Slicer Module logic includes" FORCE)

# Slicer Module MRML include file directories.
set(Slicer_ModuleMRML_INCLUDE_DIRS "@Slicer_ModuleMRML_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "Slicer Module MRML includes" FORCE)

# Slicer Module Widgets include file directories.
set(Slicer_ModuleWidgets_INCLUDE_DIRS "@Slicer_ModuleWidgets_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "Slicer Module widgets includes" FORCE)

set(FreeSurfer_INCLUDE_DIRS "@FreeSurfer_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "FreeSurfer includes" FORCE)

set(ITKFactoryRegistration_INCLUDE_DIRS "@ITKFactoryRegistration_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "ITKFactoryRegistration includes" FORCE)

set(MRMLCore_INCLUDE_DIRS "@MRMLCore_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "MRMLCore includes" FORCE)

set(MRMLLogic_INCLUDE_DIRS "@MRMLLogic_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "MRMLLogic includes" FORCE)

set(MRMLCLI_INCLUDE_DIRS "@MRMLCLI_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "MRMLCLI includes" FORCE)

set(qMRMLWidgets_INCLUDE_DIRS "@qMRMLWidgets_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "qMRMLWidgets includes" FORCE)

set(RemoteIO_INCLUDE_DIRS "@RemoteIO_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "RemoteIO includes" FORCE)

set(vtkAddon_INCLUDE_DIRS "@vtkAddon_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "vtkAddon includes" FORCE)
  
set(vtkITK_INCLUDE_DIRS "@vtkITK_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "vtkITK includes" FORCE)

set(vtkTeem_INCLUDE_DIRS "@vtkTeem_INCLUDE_DIRS_CONFIG@"
  CACHE INTERNAL "vtkTeem includes" FORCE)

# The location of the UseSlicer.cmake file.
set(Slicer_USE_FILE "@Slicer_USE_FILE_CONFIG@")

set(Slicer_BINARY_INNER_SUBDIR "@Slicer_BINARY_INNER_SUBDIR@")

# Slicer relative build directories.
set(Slicer_BIN_DIR "@Slicer_BIN_DIR@")
set(Slicer_LIB_DIR "@Slicer_LIB_DIR@")
set(Slicer_INCLUDE_DIR "@Slicer_INCLUDE_DIR@")
set(Slicer_SHARE_DIR "@Slicer_SHARE_DIR@")
set(Slicer_ITKFACTORIES_DIR "@Slicer_ITKFACTORIES_DIR@")

set(Slicer_CLIMODULES_SUBDIR "@Slicer_CLIMODULES_SUBDIR@")
set(Slicer_CLIMODULES_BIN_DIR "@Slicer_CLIMODULES_BIN_DIR@")
set(Slicer_CLIMODULES_LIB_DIR "@Slicer_CLIMODULES_LIB_DIR@")
set(Slicer_CLIMODULES_SHARE_DIR "@Slicer_CLIMODULES_SHARE_DIR@")

set(Slicer_QTLOADABLEMODULES_SUBDIR "@Slicer_QTLOADABLEMODULES_SUBDIR@")
set(Slicer_QTLOADABLEMODULES_BIN_DIR "@Slicer_QTLOADABLEMODULES_BIN_DIR@")
set(Slicer_QTLOADABLEMODULES_LIB_DIR "@Slicer_QTLOADABLEMODULES_LIB_DIR@")
set(Slicer_QTLOADABLEMODULES_INCLUDE_DIR "@Slicer_QTLOADABLEMODULES_INCLUDE_DIR@")
set(Slicer_QTLOADABLEMODULES_SHARE_DIR "@Slicer_QTLOADABLEMODULES_SHARE_DIR@")
set(Slicer_QTLOADABLEMODULES_PYTHON_LIB_DIR "@Slicer_QTLOADABLEMODULES_PYTHON_LIB_DIR@")

if(Slicer_USE_PYTHONQT)
  set(Slicer_QTSCRIPTEDMODULES_SUBDIR "@Slicer_QTSCRIPTEDMODULES_SUBDIR@")
  set(Slicer_QTSCRIPTEDMODULES_BIN_DIR "@Slicer_QTSCRIPTEDMODULES_BIN_DIR@")
  set(Slicer_QTSCRIPTEDMODULES_LIB_DIR "@Slicer_QTSCRIPTEDMODULES_LIB_DIR@")
  set(Slicer_QTSCRIPTEDMODULES_INCLUDE_DIR "@Slicer_QTSCRIPTEDMODULES_INCLUDE_DIR@")
  set(Slicer_QTSCRIPTEDMODULES_SHARE_DIR "@Slicer_QTSCRIPTEDMODULES_SHARE_DIR@")
endif()

# Slicer install root
set(Slicer_INSTALL_ROOT "@Slicer_INSTALL_ROOT@")

# Slicer relative install directories.
set(Slicer_INSTALL_BIN_DIR "@Slicer_INSTALL_BIN_DIR@")
set(Slicer_INSTALL_LIB_DIR "@Slicer_INSTALL_LIB_DIR@")
set(Slicer_INSTALL_INCLUDE_DIR "@Slicer_INSTALL_INCLUDE_DIR@")
set(Slicer_INSTALL_SHARE_DIR "@Slicer_INSTALL_SHARE_DIR@")
set(Slicer_INSTALL_ITKFACTORIES_DIR "@Slicer_INSTALL_ITKFACTORIES_DIR@")

set(Slicer_INSTALL_CLIMODULES_BIN_DIR "@Slicer_INSTALL_CLIMODULES_BIN_DIR@")
set(Slicer_INSTALL_CLIMODULES_LIB_DIR "@Slicer_INSTALL_CLIMODULES_LIB_DIR@")
set(Slicer_INSTALL_CLIMODULES_SHARE_DIR "@Slicer_INSTALL_CLIMODULES_SHARE_DIR@")

set(Slicer_INSTALL_QTLOADABLEMODULES_BIN_DIR "@Slicer_INSTALL_QTLOADABLEMODULES_BIN_DIR@")
set(Slicer_INSTALL_QTLOADABLEMODULES_LIB_DIR "@Slicer_INSTALL_QTLOADABLEMODULES_LIB_DIR@")
set(Slicer_INSTALL_QTLOADABLEMODULES_PYTHON_LIB_DIR "@Slicer_INSTALL_QTLOADABLEMODULES_PYTHON_LIB_DIR@")
set(Slicer_INSTALL_QTLOADABLEMODULES_INCLUDE_DIR "@Slicer_INSTALL_QTLOADABLEMODULES_INCLUDE_DIR@")
set(Slicer_INSTALL_QTLOADABLEMODULES_SHARE_DIR "@Slicer_INSTALL_QTLOADABLEMODULES_SHARE_DIR@")

if(Slicer_USE_PYTHONQT)
  set(Slicer_INSTALL_QTSCRIPTEDMODULES_BIN_DIR "@Slicer_INSTALL_QTSCRIPTEDMODULES_BIN_DIR@")
  set(Slicer_INSTALL_QTSCRIPTEDMODULES_LIB_DIR "@Slicer_INSTALL_QTSCRIPTEDMODULES_LIB_DIR@")
  set(Slicer_INSTALL_QTSCRIPTEDMODULES_INCLUDE_DIR "@Slicer_INSTALL_QTSCRIPTEDMODULES_INCLUDE_DIR@")
  set(Slicer_INSTALL_QTSCRIPTEDMODULES_SHARE_DIR "@Slicer_INSTALL_QTSCRIPTEDMODULES_SHARE_DIR@")
endif()

# The Slicer install prefix (*not* defined in the install tree)
set(Slicer_INSTALL_PREFIX  "@CMAKE_INSTALL_PREFIX@")

# --------------------------------------------------------------------------
# External data
# --------------------------------------------------------------------------
if(NOT DEFINED Slicer_ExternalData_DATA_MANAGEMENT_TARGET)
  set(Slicer_ExternalData_DATA_MANAGEMENT_TARGET "@Slicer_ExternalData_DATA_MANAGEMENT_TARGET@")
endif()
set(Slicer_ExternalData_OBJECT_STORES "@Slicer_ExternalData_OBJECT_STORES@")
set(Slicer_ExternalData_URL_TEMPLATES "@Slicer_ExternalData_URL_TEMPLATES@")

# --------------------------------------------------------------------------
# External projects
# --------------------------------------------------------------------------

# With the help of SuperBuild, Slicer has been configured and built against a collection
# of external projects.
#
# Considering that, by default, Slicer and most of its dependent external projects are
# built as shared library, it's important to make sure that the project including
# SlicerConfig.cmake (this file) is built against the same set of external projects if it applies.
#
# Let's consider the example of a project dependending on both VTK and Slicer. With the help of
# the macro 'slicer_config_set_ep', the build system will check that the path of the already
# defined VTK_DIR matches the VTK_DIR used to build Slicer.
#
# A typical use of this macro is illustrated below:
#
#    slicer_config_set_ep("VTK_DIR", "@VTK_DIR_CONFIG@")
#
#
macro(slicer_config_set_ep var value)
  if(NOT "${value}" STREQUAL "")
    if(DEFINED ${var})
      get_filename_component(var_realpath "${${var}}" REALPATH)
      get_filename_component(value_realpath ${value} REALPATH)
      if(NOT ${var_realpath} STREQUAL ${value_realpath})
        message(FATAL_ERROR "Variable ${var} defined prior calling 'find_package(Slicer)' does NOT "
                            "match value used to configure Slicer. It probably means that a different "
                            "${var} has been used to configure this project and Slicer.\n"
                            "${var}=${${var}}\n"
                            "Slicer_${var}=${value}")
      endif()
    endif()
    set(${var} "${value}" ${ARGN})
  endif()
endmacro()

# SlicerExecutionModel settings
set(SlicerExecutionModel_CLI_LIBRARY_WRAPPER_CXX "@SlicerExecutionModel_CLI_LIBRARY_WRAPPER_CXX_CONFIG@")
set(SlicerExecutionModel_EXTRA_INCLUDE_DIRECTORIES "@SlicerExecutionModel_EXTRA_INCLUDE_DIRECTORIES_CONFIG@")
set(SlicerExecutionModel_EXTRA_EXECUTABLE_TARGET_LIBRARIES "@SlicerExecutionModel_EXTRA_EXECUTABLE_TARGET_LIBRARIES_CONFIG@")

# Slicer external projects variables
@Slicer_SUPERBUILD_EP_VARS_CONFIG@

# --------------------------------------------------------------------------
# Consistent Compiler Selections
# --------------------------------------------------------------------------
# Compilation Commands
set(Slicer_CMAKE_CXX_COMPILER "@Slicer_CMAKE_CXX_COMPILER_CONFIG@")
set(Slicer_CMAKE_C_COMPILER   "@Slicer_CMAKE_C_COMPILER_CONFIG@")
set(Slicer_CMAKE_CXX_FLAGS    "@Slicer_CMAKE_CXX_FLAGS_CONFIG@")
set(Slicer_CMAKE_C_FLAGS      "@Slicer_CMAKE_C_FLAGS_CONFIG@")

# With the help of SuperBuild, Slicer has been configured with specific compiler
#
# Considering that, by default, Slicer and most of its dependent external projects are
# built with a particular compiler, it's important to make sure that the project including
# SlicerConfig.cmake (this file) is built against the same compliant compiler
#
# A typical use of this macro is illustrated below:
#    slicer_config_set_compiler_ep("CMAKE_C_COMPILER", "@Slicer_CMAKE_C_COMPILER@")
#    slicer_config_set_compiler_ep("CMAKE_CXX_COMPILER", "@Slicer_CMAKE_CXX_COMPILER@")
#
macro(slicer_config_set_compiler_ep var value)
  if(NOT "${value}" STREQUAL "")
    if(DEFINED ${var})
      get_filename_component(var_realpath "${${var}}" REALPATH)
      get_filename_component(value_realpath ${value} REALPATH)
      if(NOT MSVC AND NOT ${var_realpath} STREQUAL ${value_realpath})
        message(FATAL_ERROR "Variable ${var} defined prior calling 'find_package(Slicer)' does NOT "
                            "match value used to configure Slicer. It probably means that a different "
                            "${var} has been used to configure this project and Slicer.\n"
                            "${var}=${${var}}\n"
                            "Slicer_${var}=${value}")
      endif()
    endif()
    set(${var} "${value}" ${ARGN})
  endif()
endmacro()
slicer_config_set_compiler_ep( CMAKE_C_COMPILER   "@Slicer_CMAKE_C_COMPILER_CONFIG@"
   CACHE PATH "Path to C compiler used in Slicer build" FORCE )
slicer_config_set_compiler_ep( CMAKE_CXX_COMPILER "@Slicer_CMAKE_CXX_COMPILER_CONFIG@"
   CACHE PATH "Path to CXX compiler used in Slicer build" FORCE )

set(CMAKE_CXX_FLAGS    "@Slicer_CMAKE_CXX_FLAGS_CONFIG@")
set(CMAKE_C_FLAGS      "@Slicer_CMAKE_C_FLAGS_CONFIG@")

# On platform (i.e. Windows with Visual Studio) where it is possible to use
# either a 32 or 64 bits generator, it is important to compare bitness of Slicer
# project against project depending on Slicer (i.e. extension) to ensure there
# are no mismatch.
set(Slicer_CMAKE_SIZEOF_VOID_P "@CMAKE_SIZEOF_VOID_P@")
set(Slicer_CMAKE_GENERATOR "@CMAKE_GENERATOR@")
if(NOT DEFINED Slicer_SKIP_CMAKE_SIZEOF_VOID_P_CHECK)
  set(Slicer_SKIP_CMAKE_SIZEOF_VOID_P_CHECK FALSE)
endif()
if(NOT ${Slicer_SKIP_CMAKE_SIZEOF_VOID_P_CHECK})
  if(NOT Slicer_CMAKE_SIZEOF_VOID_P EQUAL CMAKE_SIZEOF_VOID_P)
    message(FATAL_ERROR
      "Mismatch between bitness of '${CMAKE_PROJECT_NAME}' and 'Slicer' project !\n"
      "\tSlicer_CMAKE_SIZEOF_VOID_P:${Slicer_CMAKE_SIZEOF_VOID_P}\n"
      "\tCMAKE_SIZEOF_VOID_P:${CMAKE_SIZEOF_VOID_P}\n"
      "Reconfigure '${CMAKE_PROJECT_NAME}' project using a compatible Generator.\n"
      "Generator used to configure Slicer was: ${Slicer_CMAKE_GENERATOR}\n"
      "See http://www.cmake.org/cmake/help/v2.8.11/cmake.html#opt:-Ggenerator-name")
  endif()
endif()

# List all required external project
set(Slicer_EXTERNAL_PROJECTS @Slicer_EXTERNAL_PROJECTS_CONFIG@)
set(Slicer_EXTERNAL_PROJECTS_NO_USEFILE @Slicer_EXTERNAL_PROJECTS_NO_USEFILE_CONFIG@)

@Slicer_EP_COMPONENT_VARS_CONFIG@

# Include external projects
foreach(proj ${Slicer_EXTERNAL_PROJECTS})
  set(_component_args)
  if(DEFINED Slicer_${proj}_COMPONENTS)
    set(_component_args COMPONENTS ${Slicer_${proj}_COMPONENTS})
  endif()
  find_package(${proj} ${_component_args} REQUIRED)
  # Add project CMake dir to module path
  if(DEFINED ${proj}_CMAKE_DIR)
    set(CMAKE_MODULE_PATH
      ${${proj}_CMAKE_DIR}
      ${CMAKE_MODULE_PATH}
      )
  endif()
  # Add project Utilities/CMake dir to module path
  if(DEFINED ${proj}_CMAKE_UTILITIES_DIR)
    set(CMAKE_MODULE_PATH
      ${${proj}_CMAKE_UTILITIES_DIR}
      ${CMAKE_MODULE_PATH}
      )
  endif()
endforeach()

# This block should be added after VTK and CTK are found.
# Indeed, it will check if both VTK_QT_QMAKE_EXECUTABLE and CTK_QT_QMAKE_EXECUTABLE are valid.
include(${Slicer_CMAKE_DIR}/SlicerBlockFindQtAndCheckVersion.cmake)

# --------------------------------------------------------------------------
if(EXISTS "@Slicer_TARGETS_FILE@" AND NOT TARGET SlicerBaseLogic)
  include("@Slicer_TARGETS_FILE@")
endif()