Uniform print speed - SAME speed for the whole print = better 3d print.

[Calzune]

Sometimes when you print stuff you just want the print as fast as possible and dont really care about the outer finish. But often you want the print to look as good as possible, and with the default speed settings you can often get different outerwall finish.

Here is the default settings. outerwall speed is at 200mm/s and as you can see the print have different speeds which you can see on a finished print very clearly.

Here i have manually lowered the outerwall speed so it is the (almost) same on the whole print and this makes the finished print much better looking at the cost of only a 7 minutes.

MY IDEA: Create a checkbox in the speeds menu that makes the outerwall speed the same on the whole print for a uniform speed = Better looking 3d print.

This will of course slow down the whole print time, but if you want to print toys, figures etc for maximum quality , this uniform speed will be a very used button.

Many users dont know about this, and I see very often posts on social media about why their print have different outerwall finish. This checkbox will fix that.