imx6qdl-hummingboard2.dtsi

/*
 * Device Tree file for SolidRun HummingBoard2
 * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License.
 *
 *     This file is distributed in the hope that it will be useful
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */
#include "imx6qdl-solidrun-microsom.dtsi"
#include "imx6qdl-solidrun-microsom-ar8035.dtsi"

/ {
	aliases {
		mmc0 = &usdhc2;
		mmc1 = &usdhc1;
		mxcfb0 = &mxcfb1;
		mxcfb2 = &mxcfb2;
	};

	chosen {
		bootargs = "quiet console=ttymxc0,115200 root=/dev/mmcblk0p2 rw";
		stdout-path = &uart1;
	};

	ir_recv: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio7 9 1>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
		linux,rc-map-name = "rc-rc6-mce";
	};

	mxcfb1: fb@0 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "hdmi";
		interface_pix_fmt = "RGB24";
		mode_str ="1920x1080M@60";
		default_bpp = <32>;
		int_clk = <0>;
		late_init = <0>;
		status = "okay";
	};

	mxcfb2: fb@1 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "ldb";
		interface_pix_fmt = "RGB666";
		default_bpp = <16>;
		int_clk = <0>;
		late_init = <0>;
		status = "disabled";
	};

	regulators {
		compatible = "simple-bus";

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_1p8v: 1p8v {
			compatible = "regulator-fixed";
			regulator-name = "1P8V";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		reg_usbh1_vbus: usb-h1-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio1 0 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbotg_vbus: usb-otg-vbus {
			compatible = "regulator-fixed";
			enable-active-high;
			gpio = <&gpio3 22 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
		};

		reg_usbh2_vbus: usb-h2-vbus {
			compatible = "regulator-gpio";
			enable-active-high;
			enable-gpio = <&gpio2 13 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
			regulator-name = "usb_h2_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-boot-on;
		};

		reg_usbh3_vbus: usb-h3-vbus {
			compatible = "regulator-gpio";
			enable-active-high;
			enable-gpio = <&gpio7 10 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
			regulator-name = "usb_h3_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-boot-on;
		};

		reg_usdhc2_vbus: usdhc-2-vbus {
			compatible = "regulator-fixed";
			regulator-name = "USDHC2-VBUS";
			gpio = <&gpio4 30 0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hummingboard2_usdhc2_pwr>;
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
                };
	};

	sound-sgtl5000 {
		audio-codec = <&sgtl5000>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		compatible = "fsl,imx-audio-sgtl5000";
		model = "On-board Codec";
		mux-ext-port = <5>;
		mux-int-port = <1>;
		cpu-dai = <&ssi1>;
	};

	sound-hdmi {
		compatible = "fsl,imx6q-audio-hdmi",
			     "fsl,imx-audio-hdmi";
		model = "imx-audio-hdmi";
		hdmi-controller = <&hdmi_audio>;
	};

	v4l2_cap_0 {
		compatible = "fsl,imx6q-v4l2-capture";
		ipu_id = <0>;
		csi_id = <1>;
		mclk_source = <0>;
		mipi_camera = <1>;
		default_input = <0>;
		status = "okay";
	};

	v4l2_out {
		compatible = "fsl,mxc_v4l2_output";
		status = "okay";
	};
};

&audmux {
	status = "okay";
};

&dcic1 {
	dcic_id = <0>;
	dcic_mux = "dcic-hdmi";
	status = "okay";
};

&dcic2 {
	dcic_id = <1>;
	dcic_mux = "dcic-lvds1";
	status = "okay";
};

&ecspi2 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio2 26 0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
	status = "okay";

	spidev0: spi@0 {
		compatible = "spidev";
		reg = <0>;
		spi-max-frequency = <20000000>;
	};
};

&gpc {
	fsl,cpu_pupscr_sw2iso = <0xf>;
	fsl,cpu_pupscr_sw = <0xf>;
	fsl,cpu_pdnscr_iso2sw = <0x1>;
	fsl,cpu_pdnscr_iso = <0x1>;
};

&hdmi_core {
	ipu_id = <0>;
	disp_id = <0>;
	status = "okay";
};

&hdmi_video {
	fsl,phy_reg_vlev = <0x0294>;
	fsl,phy_reg_cksymtx = <0x800d>;
	status = "okay";
};

&hdmi_audio {
	status = "okay";
};

&hdmi_cec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
	status = "okay";
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
	status = "okay";

	ov5640_mipi: ov5640_mipi@3c {
		compatible = "ovti,ov5640_mipi";
		reg = <0x3c>;
                clocks = <&clks IMX6QDL_CLK_CKO2>;
                clock-names = "csi_mclk";
/*
                DOVDD-supply = <&reg_3p3v>;
                AVDD-supply = <&reg_3p3v>;
                DVDD-supply = <&reg_3p3v>;
*/
                pwn-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
                rst-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
                ipu_id = <0>;
                csi_id = <1>;
                mclk = <24000000>;
                mclk_source = <0>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_mipi>;
                extended-buffer;
        };

	rtc: pcf8523@68 {
		compatible = "nxp,pcf8523";
		reg = <0x68>;
		nxp,12p5_pf;
	};

	sgtl5000: sgtl5000@0a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
		VDDA-supply = <&reg_3p3v>;
		VDDIO-supply = <&reg_3p3v>;
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
	status = "okay";

	ddc: imx6_hdmi_i2c@50 {
		compatible = "fsl,imx6-hdmi-i2c";
		reg = <0x50>;
	};
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;
	hummingboard2 {
		pinctrl_hog: hoggrp {
		fsl,pins = <
				/*
				 * 36 pin headers GPIO description. The pins 
				 * numbering as following -
				 *
				 * 	3.2v	5v	74	75
				 *	73	72	71	70
				 *	69	68	67	66
				 *
				 *	77	78	79	76
				 *	65	64	61	60
				 *	53	52	51	50
				 *	49	48	166	132
				 *	95	94	90	91
				 *	GND	54	24	204
				 *
				 * The GPIO numbers can be extracted using
				 * signal name from below.
				 * Example -
				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
				 *
				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
				 * number is : gpio number = (X-1) * 32 + Y
				 */
				/* DI1_PIN15 */
				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
				/* DI1_PIN02 */
				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
				/* DISP1_DATA00 */
				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
				/* DISP1_DATA01 */
				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
				/* DISP1_DATA02 */
				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
				/* DISP1_DATA03 */
				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
				/* DISP1_DATA04 */
				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
				/* DISP1_DATA05 */
				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
				/* DISP1_DATA06 */
				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
				/* DISP1_DATA07 */
				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
				/* DI1_D0_CS */
				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
				/* DI1_D1_CS */
				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
				/* DI1_PIN01 */
				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
				/* DI1_PIN03 */
				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
				/* DISP1_DATA08 */
				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
				/* DISP1_DATA09 */
				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
				/* DISP1_DATA10 */
				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
				/* DISP1_DATA11 */
				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
				/* DISP1_DATA12 */
				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
				/* DISP1_DATA13 */
				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
				/* DISP1_DATA14 */
				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
				/* DISP1_DATA15 */
				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
				/* DISP1_DATA16 */
				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
				/* DISP1_DATA17 */
				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
				/* DISP1_DATA18 */
				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
				/* DISP1_DATA19 */
				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
				/* DISP1_DATA20 */
				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
				/* DISP1_DATA21 */
				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
				/* DISP1_DATA22 */
				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
				/* DISP1_DATA23 */
				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
				/* DI1_DISP_CLK */
				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
				/* SPDIF_IN */
				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
				/* SPDIF_OUT */
				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1

				/* MikroBUS GPIO pin number 10 */
				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
			>;
		};

		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
			fsl,pins = <
				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
			>;
		};

		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
			>;
		};

		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
			fsl,pins = <
				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
			>;
		};

		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
			>;
		};

		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
			fsl,pins = <
				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
			>;
		};

                pinctrl_hummingboard2_mipi: hummingboard2_mipi {
                        fsl,pins = <
                                MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
                                MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
                                MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
                        >;
                };

		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
			fsl,pins = <
				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
			>;
		};

		pinctrl_hummingboard2_pwm1: pwm1grp {
			fsl,pins = <
				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
			>;
		};

		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
			fsl,pins = <
				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
			>;
		};

		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
		};

		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
		};

		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
		};

		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
			/*
			 * Similar to pinctrl_usbotg_2, but we want it
			 * pulled down for a fixed host connection.
			 */
			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
		};

		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
		};

		pinctrl_hummingboard2_usdhc2_pwr: hummingboard2-usdhc2-pwr {
			fsl,pins = <MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0>;
		};

		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
			fsl,pins = <
				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x13071
				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
			>;
		};

		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
			>;
		};

		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
			>;
		};

		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
			>;
		};

		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
			>;
		};
		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
			fsl,pins = <
				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
			>;
		};
		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
			>;
		};
	};
};

&ldb {
	status = "disabled";

	lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		crtc = "ipu2-di0";
		primary;

		display-timings {
			native-mode = <&timing0>;
			timing0: hsd100pxn1 {
				clock-frequency = <65000000>;
				hactive = <1024>;
				vactive = <768>;
				hback-porch = <220>;
				hfront-porch = <40>;
				vback-porch = <21>;
				vfront-porch = <7>;
				hsync-len = <60>;
				vsync-len = <10>;
			};
		};
	};
};

&mipi_csi {
	ipu_id = <0>;
	csi_id = <1>;
	v_channel = <0>;
	lanes = <2>; 
	mipi_dphy_clk = <0x14>;
	status = "okay";
};

&pcie {
	pinctrl-names = "default";
	pinctrl-0 = <
		&pinctrl_hummingboard2_pcie_reset
	>;
	reset-gpio = <&gpio2 11 0>;
	status = "okay";
	no-msi;
};

&pwm1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
        status = "okay";
};

&pwm3 {
	status = "disabled";
};

&pwm4 {
	status = "disabled";
};

&ssi1 {
	fsl,mode = "i2s-slave";
	status = "okay";
};

&usbh1 {
	disable-over-current;
	vbus-supply = <&reg_usbh1_vbus>;
	status = "okay";
};

&usbotg {
	disable-over-current;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
	vbus-supply = <&reg_usbotg_vbus>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <
		&pinctrl_hummingboard2_usdhc2_aux
		&pinctrl_hummingboard2_usdhc2
	>;
	pinctrl-1 = <
		&pinctrl_hummingboard2_usdhc2_aux
		&pinctrl_hummingboard2_usdhc2_100mhz
	>;
	pinctrl-2 = <
		&pinctrl_hummingboard2_usdhc2_aux
		&pinctrl_hummingboard2_usdhc2_200mhz
	>;

	card-external-vcc-supply = <&reg_usdhc2_vbus>;
	cd-gpios = <&gpio1 4 0>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <
		&pinctrl_hummingboard2_usdhc3
	>;
	vmmc-supply = <&reg_3p3v>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
	status = "okay";
};