Skip to content

Latest commit

 

History

History
576 lines (398 loc) · 25.5 KB

README.md

File metadata and controls

576 lines (398 loc) · 25.5 KB

Node Serialport

npm Gitter chat Dependency Status Build Status Build status Coverage Status

For support you can open a github issue, for discussions, designs, and clarifications, we recommend you join our Gitter Chat room. We have two related projects Browser Serialport "just like Node Serialport but for browser apps", and Serialport Test Piliot which helps us test serialport.

If you'd like to contribute please take a look at contribution guide and code of conduct. You also might want to see the road map. We also have issues tagged "good first PR" if you'd like to start somewhere specific. We'll do our best to support you until your PR is merged.


Which version of Serialport would you like documentation for?

You're reading the README for the master branch of serialport. You probably want to be looking at the README of our latest release. See our change log for what's new and our upgrade guide for a walk through on what to look out for between major versions.


Imagine a world where you can write JavaScript to control blenders, lights, security systems, or even robots. Yes, I said robots. That world is here and now with node serialport. It provides a very simple interface to the low level serial port code necessary to program Arduino chipsets, X10 wireless communications, or even the rising Z-Wave and Zigbee standards. The physical world is your oyster with this goodie. For a full break down of why we made this, please read NodeBots - The Rise of JS Robotics.


For getting started with node-serialport, we recommend you begin with the following articles:



Platform Support

serialport supports and tests against the following platforms, architectures and node versions.

Platform / Arch Node v0.10.x Node v0.12.x Node v4.x Node v5.x Node v6.x
Linux / ia32
Linux / x64
Linux / ARM v6¹
Linux / ARM v7¹
Linux / ARM v8¹
Linux / MIPSel¹
Linux / PPC64¹
Windows² / x86
Windows² / x64
OSX³ / x64

¹ ARM, MIPSel and PPC64¹ platforms are known to work but are not currently part of our test or build matrix. #846 ARM v4 and v5 was dropped from NodeJS after Node v0.10.

² Windows 7, 8, 10, and 10 IoT are supported but only Windows Server 2012 R2 is tested by our CI.

³ OSX 10.4 Tiger and above are supported but only 10.9.5 Mavericks with Xcode 6.1 is tested in our CI.

Installation Instructions

For most "standard" use cases (node v4.x on mac, linux, windows on a x86 or x64 processor), node-serialport will install nice and easy with a simple

npm install serialport

Installation Special Cases

We are using node-pre-gyp to compile and post binaries of the library for most common use cases (linux, mac, windows on standard processor platforms). If you are on a special case, node-serialport will work, but it will compile the binary when you install.

This assumes you have everything on your system necessary to compile ANY native module for Node.js. This may not be the case, though, so please ensure the following are true for your system before filing an issue about "Does not install". For all operatings systems, please ensure you have Python 2.x installed AND not 3.0, node-gyp (what we use to compile) requires Python 2.x.

Windows

  • Windows 7, Windows 8.1, and Windows 10 are supported.
  • Might just download and install with no extra steps. If the downloaded binary fails you'll have to build it with the following steps.
  • Install Visual Studio Express 2013 for Windows Desktop.
  • If you are hacking on an Arduino, be sure to install the drivers.
  • Install node.js matching the bitness (32 or 64) of your operating system.
  • Install Python 2.7.6 matching the bitness of your operating system. For any questions, please refer to their FAQ. Default settings are perfect.
  • Open the 'Visual Studio Command Prompt' and add Python to the path.

Mac OS X

Ensure that you have at a minimum the xCode Command Line Tools installed appropriate for your system configuration. If you recently upgraded the OS, it probably removed your installation of Command Line Tools, please verify before submitting a ticket. To compile node-serialport with Node.js 4.x+, you will need to use g++ v4.8 or higher.

Ubuntu/Debian Linux

The best way to install any version of NodeJS is to use the NodeSource Node.js Binary Distributions. Older versions of Ubuntu install nodejs with the wrong version and binary name. If you node binary is nodejs not node or if your node version is v0.10.29 then you should follow these instructions.

The package build-essential is necessary to compile serialport. If there's a binary for your platform you won't need it. Keep rocking!

# Using Ubuntu and node 6
curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
sudo apt-get install -y nodejs

# Using Debian and node 6, as root
curl -sL https://deb.nodesource.com/setup_6.x | bash -
apt-get install -y nodejs

Alpine Linux

Alpine is a (very) small distro, but it uses the musl standard library instead of glibc (that most other Linux distros use), so it requires compilation.

# If you don't have node/npm already, add that first
sudo apk add --no-cache nodejs

# Add the necessary build and runtime dependencies
sudo apk add --no-cache make gcc g++ python linux-headers udev

# Then we can install serialport, forcing it to compile
npm install serialport --build-from-source=serialport

Raspberry Pi Linux

Follow the instructions for setting up a Raspberry pi for use with Johnny-Five and Raspi IO. These projects use Node Serialport under the hood.

Revision CPU Arm Version
A, A+, B, B+ 32-bit ARM1176JZF-S ARMv6
Compute Module 32-bit ARM1176JZF-S ARMv6
Zero 32-bit ARM1176JZF-S ARMv6
B2 32-bit ARM Cortex-A7 ARMv7
B3 32-bit ARM Cortex-A53 ARMv8

Illegal Instruction

The pre-compiled binaries assume a fully capable chip. The Galileo 2 for example lacks a few instruction sets from the ia32 architecture. A few other platforms have similar issues. So if you get Illegal Instruction when trying to run serialport you'll need to rebuild the serialport binary by asking npm to rebuild it.

# Will ask npm to build serialport during install time
npm install serialport --build-from-source

# If you have a package that depends on serialport you can ask npm to rebuild it specifically.
npm rebuild serialport --build-from-source

# Or leave out the package name to rebuild everything.
npm rebuild --build-from-source

Usage

Opening a serial port:

var SerialPort = require("serialport");
var port = new SerialPort("/dev/tty-usbserial1", {
  baudRate: 57600
});

When opening a serial port, you can specify (in this order).

  1. Path to Serial Port - required.
  2. Options - optional and described below.

Opening a Port

Constructing a SerialPort object will open a port on nextTick. You can bind events while the port is opening but you must wait until it is open to write() to it. (Most port functions require an open port.) You can call code when a port is opened in three ways.

  • The open event is always emitted when the port is opened
  • The constructor's openCallback is passed to .open() when the autoOpen option hasn't been disabled, if you have disabled it the callback is ignored.
  • The .open() function takes a callback that is called after the port is opened. This can be used if you disabled the autoOpen option or have previously closed an open port.
var SerialPort = require('serialport');
var port = new SerialPort('/dev/tty-usbserial1');

port.on('open', function() {
  port.write('main screen turn on', function(err) {
    if (err) {
      return console.log('Error on write: ', err.message);
    }
    console.log('message written');
  });
});

// open errors will be emitted as an error event
port.on('error', function(err) {
  console.log('Error: ', err.message);
})

This could be moved to the constructor's callback.

var SerialPort = require('serialport');
var port = new SerialPort('/dev/tty-usbserial1', function (err) {
  if (err) {
    return console.log('Error: ', err.message);
  }
  port.write('main screen turn on', function(err) {
    if (err) {
      return console.log('Error on write: ', err.message);
    }
    console.log('message written');
  });
});

When disabling the autoOpen option you'll need to open the port on your own.

var SerialPort = require('serialport');
var port = new SerialPort('/dev/tty-usbserial1', { autoOpen: false });

port.open(function (err) {
  if (err) {
    return console.log('Error opening port: ', err.message);
  }

  // write errors will be emitted on the port since there is no callback to write
  port.write('main screen turn on');
});

// the open event will always be emitted
port.on('open', function() {
  // open logic
});

Listing Ports

.list(callback)

Retrieves a list of available serial ports with metadata.

  • callback is a required function that looks should look like: function (err, ports) { ... }. ports will be an array of objects with port info. Only the comName is guaranteed, all the other fields undefined if unavailable. The comName is either the path or identifier (eg COM1) used to open the serialport.
// example port information
{
  comName: '/dev/cu.usbmodem1421',
  manufacturer: 'Arduino (www.arduino.cc)',
  serialNumber: '757533138333964011C1',
  pnpId: undefined,
  locationId: '0x14200000',
  vendorId: '0x2341',
  productId: '0x0043'
}
var SerialPort = require('serialport');
SerialPort.list(function (err, ports) {
  ports.forEach(function(port) {
    console.log(port.comName);
    console.log(port.pnpId);
    console.log(port.manufacturer);
  });
});

Parsers

Out of the box, node-serialport provides four parsers: one that simply emits the raw buffer as a data event, one that emits a data event when a specfic byte sequence is received, one that emits a data event every 'length' bytes, and one which provides familiar "readline" style parsing.

To use the readline parser, you must provide a delimiter as such:

var SerialPort = require('serialport');

var port = new SerialPort('/dev/tty-usbserial1', {
  parser: SerialPort.parsers.readline('\n')
});

To use the raw parser don't specify any parser, however if you really want to you can:

var SerialPort = require('serialport');

var port = new SerialPort('/dev/tty-usbserial1', {
  parser: SerialPort.parsers.raw
});

Note that the raw parser does not guarantee that all data it receives will come in a single event.

To use the byte sequence parser, you must provide a delimiter as an array of bytes:

var SerialPort = require('serialport');

var port = new SerialPort('/dev/tty-usbserial1', {
  parser: SerialPort.parsers.byteDelimiter([10,13])
});

To use the byte length parser, you must provide a delimiter as a length in bytes:

var SerialPort = require('serialport');

var port = new SerialPort('/dev/tty-usbserial1', {
  parser: SerialPort.parsers.byteLength(5)
});

You can get updates of new data from the Serial Port as follows:

port.on('data', function (data) {
  console.log('Data: ' + data);
});

You can write to the serial port by sending a string or buffer to the write method as follows:

port.write('Hi Mom!');
port.write(new Buffer('Hi Mom!'));

Enjoy and do cool things with this code.

Methods

SerialPort (path, options, openCallback)

Create a new serial port object for the path. In the case of invalid arguments or invalid options when constructing a new SerialPort it will throw an error. The port will open automatically by default which is the equivalent of calling port.open(openCallback) in the next tick. This can be disabled by setting the option autoOpen to false.

path

The system path of the serial port to open. For example, /dev/tty on Mac/Linux or COM1 on Windows.

options (optional)

Port configuration options.

  • autoOpen Automatically opens the port on nextTick, defaults to true.
  • lock Prevent other processes from opening the port, defaults to true. false is not currently supported on windows.
  • baudRate Baud Rate, defaults to 9600. Should be one of: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1800, 1200, 600, 300, 200, 150, 134, 110, 75, or 50. Custom rates as allowed by hardware is supported. Windows doesn't support custom baud rates.
  • dataBits Data Bits, defaults to 8. Must be one of: 8, 7, 6, or 5.
  • stopBits Stop Bits, defaults to 1. Must be one of: 1 or 2.
  • parity Parity, defaults to 'none'. Must be one of: 'none', 'even', 'mark', 'odd', 'space'
  • rtscts flow control, defaults to false
  • xon flow control, defaults to false
  • xoff flow control, defaults to false
  • xany flow control, defaults to false
  • bufferSize Size of read buffer, defaults to 65536. Must be an integer value.
  • parser The parser engine to use with read data, defaults to rawPacket strategy which just emits the raw buffer as a "data" event. Can be any function that accepts EventEmitter as first parameter and the raw buffer as the second parameter.
  • platformOptions - sets platform specific options, see below.

Unix Platform Options

These properties are ignored for windows. An object with the following properties:

openCallback (optional)

This function is passed to .open() and called when a connection has been opened. The callback should be a function that looks like: function (error) { ... }

Note: The callback will NOT be called if autoOpen is set to false as the open will not be performed.

.open (callback)

Opens a connection to the given serial port.

callback (optional)

Called when a connection has been opened. The callback should be a function that looks like: function (error) { ... }

.isOpen()

Returns true if the port is open.

.write (buffer, callback)

Writes data to the given serial port.

buffer

The buffer parameter accepts a Buffer object, or a type that is accepted by the Buffer constructor (ex. an array of bytes or a string).

callback (optional)

Called once the write operation returns. The callback should be a function that looks like: function (error) { ... }

Note: The write operation is non-blocking. When it returns, data may still have not actually been written to the serial port. See drain().

Note: Some devices like the Arduino reset when you open a connection to them. In these cases if you immediately write to the device they wont be ready to receive the data. This is often worked around by having the Arduino send a "ready" byte that your node program waits for before writing. You can also often get away with waiting around 400ms.

.pause ()

Pauses an open connection.

.resume ()

Resumes a paused connection.

.flush (callback)

Flushes data received but not read. See tcflush() for Mac/Linux and FlushFileBuffers for Windows.

callback (optional)

Called once the flush operation returns. The callback should be a function that looks like: function (error) { ... }

.drain (callback)

Waits until all output data has been transmitted to the serial port. See tcdrain() or FlushFileBuffers() for more information.

callback (optional)

Called once the drain operation returns. The callback should be a function that looks like: function (error) { ... }

Example

Writes data and waits until it has finish transmitting to the target serial port before calling the callback.

function writeAndDrain (data, callback) {
  sp.write(data, function () {
    sp.drain(callback);
  });
}

.close (callback)

Closes an open connection.

callback (optional)

Called once a connection is closed. The callback should be a function that looks like: function (error) { ... } If called without an callback and there is an error, an error event will be emitted.

.set (options, callback)

Sets flags on an open port. Uses SetCommMask for windows and ioctl for mac and linux.

options (optional)

All options are operating system default when the port is opened. Every flag is set on each call to the provided or default values. If options isn't provided default options will be used.

  • brk optional boolean, defaults to false
  • cts optional boolean, defaults to false
  • dsr optional boolean, defaults to false
  • dtr optional boolean, defaults to true
  • rts optional boolean, defaults to true

callback (optional)

function(err) {}

Called once the port's flags have been set. If .set is called without an callback and there is an error, an error event will be emitted.

.update (options, callback)

Changes the baudrate for an open port. Throws if you provide a bad argument. Emits an error or calls the callback if the baud rate isn't supported.

options

  • baudRate Baud Rate should be one of: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1800, 1200, 600, 300, 200, 150, 134, 110, 75, or 50. Custom rates as allowed by hardware is supported.

callback (optional)

callback: function(err)

Called once the port's baud rate has been changed. If .update is called without an callback and there is an error, an error event will be emitted.

Events

.on('open', callback)

Callback is called with no arguments when the port is opened and ready for writing. This happens if you have the constructor open immediately (which opens in the next tick) or if you open the port manually with open(). See Useage/Open Event for more information.

.on('data', callback)

Callback is called with data depending on your chosen parser. The default raw parser will have a Buffer object with a varying amount of data in it. The readLine parser will provide a string of your line. See the parsers section for more information

.on('close', callback)

Callback is called with no arguments when the port is closed. In the event of an error, an error event will be triggered

.on('error', callback)

Callback is called with an error object whenever there is an error.

.on('disconnect', callback)

Callback is called with an error object. This will always happen before a close event if a disconnection is detected.

Command Line Tools

If you install serialport globally. (eg, npm install -g serialport) you'll receive two command line tools.

Serial Port List

serialport-list will list all available serial ports in different formats.

$ serialport-list -h

  Usage: serialport-list [options]

  List available serial ports

  Options:

    -h, --help           output usage information
    -V, --version        output the version number
    -f, --format <type>  Format the output as text, json, or jsonline. default: text


$ serialport-list
/dev/cu.Bluetooth-Incoming-Port
/dev/cu.usbmodem1421    Arduino (www.arduino.cc)

$ serialport-list -f json
[{"comName":"/dev/cu.Bluetooth-Incoming-Port"},{"comName":"/dev/cu.usbmodem1421","manufacturer":"Arduino (www.arduino.cc)","serialNumber":"752303138333518011C1","locationId":"0x14200000","vendorId":"0x2341","productId":"0x0043"}]

$ serialport-list -f jsonline
{"comName":"/dev/cu.Bluetooth-Incoming-Port"}
{"comName":"/dev/cu.usbmodem1421","manufacturer":"Arduino (www.arduino.cc)","serialNumber":"752303138333518011C1","locationId":"0x14200000","vendorId":"0x2341","productId":"0x0043"}

Serial Port Terminal

serialport-term provides a basic terminal interface for communicating over a serial port. ctrl+c` will exit.

$ serialport-term -h

  Usage: serialport-term -p <port> [options]

  A basic terminal interface for communicating over a serial port. Pressing ctrl+c exits.

  Options:

    -h, --help                     output usage information
    -V, --version                  output the version number
    -l --list                      List available ports then exit
    -p, --port, --portname <port>  Path or Name of serial port
    -b, --baud <baudrate>          Baud rate default: 9600
    --databits <databits>          Data bits default: 8
    --parity <parity>              Parity default: none
    --stopbits <bits>              Stop bits default: 1
    --echo --localecho             Print characters as you type them.

$ serialport-term -l
/dev/cu.Bluetooth-Incoming-Port
/dev/cu.usbmodem1421    Arduino (www.arduino.cc)