CISCO-ATM-QOS-MIB.mib

-- *****************************************************************
-- CISCO-ATM-QOS-MIB.my:  Cisco ATM QoS MIB file
--
-- June 2002, Danny Lee
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************

CISCO-ATM-QOS-MIB DEFINITIONS ::= BEGIN

IMPORTS
      MODULE-IDENTITY,
      OBJECT-TYPE,
      Unsigned32,
      Integer32                 FROM SNMPv2-SMI
      MODULE-COMPLIANCE,
      OBJECT-GROUP              FROM SNMPv2-CONF
      TEXTUAL-CONVENTION        FROM SNMPv2-TC
      ifIndex                   FROM IF-MIB
      atmVplVpi,
      atmVclVpi,
      atmVclVci                 FROM ATM-MIB
      AtmServiceCategory        FROM ATM-FORUM-TC-MIB
      ciscoMgmt                 FROM CISCO-SMI;
      
ciscoAtmQosMIB MODULE-IDENTITY
      LAST-UPDATED      "200206100000Z"
      ORGANIZATION      "Cisco Systems, Inc."
      CONTACT-INFO
            "Cisco Systems
             Customer Service

             Postal: 170 W. Tasman Drive
                   San Jose, CA  95134
                   SA

             Tel: +1 800 553-NETS

             Email: cs-atm@cisco.com"
             
      DESCRIPTION
            "The MIB is created to provide ATM QoS information in
             these areas:
             
             1. Traffic shaping on a per-VC basis
             2. Traffic shaping on a per-VP basis 
             3. Per-VC queuing/buffering
             
             Although the initial requirements of the MIB are
             driven to support the GSR TAZ line card,
             CISCO-ATM-QOS-MIB is designed as a generic MIB to
             support ATM interfaces across all platforms.
             
             Here are the tables defined in this MIB:
             ciscoAtmQosVccTable 
                  - to provide information on traffic shaping on 
                    a per-VC basis.
                                   
             ciscoAtmQosVpcTable 
                  - to provide information on traffic shaping on
                    a per-VP basis.
                 
             ciscoAtmQosVcQueuingTable
             ciscoAtmQosVcQueuingClassTable
                  - to provide information on per-VC
                    queuing/buffering."

      REVISION      "200206100000Z"
      DESCRIPTION
            "Initial version of this MIB module."
      ::= { ciscoMgmt 279 }




ciscoAtmQosMIBNotifs  OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 0 }
ciscoAtmQosMIBObjects OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 1 }
ciscoAtmQosMIBConform OBJECT IDENTIFIER ::= { ciscoAtmQosMIB 2 }


caqVccParams          OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 1 }
caqVpcParams          OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 2 }
caqQueuingParams      OBJECT IDENTIFIER ::= { ciscoAtmQosMIBObjects 3 }


--
--
-- Beginning Textual Convention Definitions

VcParamConfigLocation ::= TEXTUAL-CONVENTION
      STATUS            current
      DESCRIPTION
        "The configuration source of a vc parameter:
         1 - Not configured - using default
         2 - Configured on vc directly
         3 - VC-class configured on vc
         4 - VC-class configured on sub-interface
         5 - VC-class configured on main-interface.
        "
      SYNTAX            INTEGER { configDefault(1),
                                  configVcDirect(2),
                                  configVcClass(3),
                                  configVcClassSubInterface(4),
                                  configVcClassInterface(5)
                                }
                                  
VpState ::= TEXTUAL-CONVENTION
      STATUS            current
      DESCRIPTION
        "States of virtual path:
         1 - Inactive
         2 - Active
        "
      SYNTAX            INTEGER { vpStateInactive(1),
                                  vpStateActive(2)
                                }

-- Ending Textual Convention Definitions
--
--


--
--
-- Per-VC Traffic shaping parameters
-- (Beginning of caqVccTable)

caqVccParamsTable       OBJECT-TYPE
      SYNTAX            SEQUENCE OF CaqVccParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This table is defined to provide QoS information for
         each active ATM VC existing on the interface."
      ::= { caqVccParams 1 }

caqVccParamsEntry       OBJECT-TYPE
      SYNTAX            CaqVccParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This list contains the ATM QoS parameters provided by
         ciscoAtmQosVccEntry."
      INDEX { ifIndex, atmVclVpi, atmVclVci }
      ::= { caqVccParamsTable 1 }

CaqVccParamsEntry ::= SEQUENCE {
      caqVccParamsType              AtmServiceCategory,
      caqVccParamsPcrIn0            Unsigned32,
      caqVccParamsPcrIn01           Unsigned32,
      caqVccParamsPcrOut0           Unsigned32,
      caqVccParamsPcrOut01          Unsigned32,
      caqVccParamsScrIn0            Unsigned32,
      caqVccParamsScrIn01           Unsigned32,
      caqVccParamsScrOut0           Unsigned32,
      caqVccParamsScrOut01          Unsigned32,
      caqVccParamsBcsIn0            Unsigned32,
      caqVccParamsBcsIn01           Unsigned32,
      caqVccParamsBcsOut0           Unsigned32,
      caqVccParamsBcsOut01          Unsigned32,
      caqVccParamsInheritLevel      VcParamConfigLocation,
      caqVccParamsMcrIn             Unsigned32,
      caqVccParamsMcrOut            Unsigned32,
      caqVccParamsInvRdf            Unsigned32,
      caqVccParamsInvRif            Unsigned32,
      caqVccParamsRfl               VcParamConfigLocation,
      caqVccParamsCdv               Unsigned32,
      caqVccParamsCdvt              Unsigned32,
      caqVccParamsIcr               Unsigned32,
      caqVccParamsTbe               Unsigned32,
      caqVccParamsFrtt              Unsigned32,
      caqVccParamsNrm               Unsigned32,
      caqVccParamsInvTrm            Unsigned32,
      caqVccParamsInvCdf            Unsigned32,
      caqVccParamsAdtf              Unsigned32
      }

caqVccParamsType        OBJECT-TYPE
        SYNTAX          AtmServiceCategory
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "The service category of this virtual circuit connection."
        ::= { caqVccParamsEntry 1 }

caqVccParamsPcrIn0      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Peak Cell Rate (PCR) in kbps with 
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 2 } 

caqVccParamsPcrIn01     OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Number of OAM F5 end to end loopback cells sent through
           the VCC."
        ::= { caqVccParamsEntry 3 }

caqVccParamsPcrOut0     OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Peak Cell Rate (PCR) in kbps with
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 4 }

caqVccParamsPcrOut01    OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Peak Cell Rate (PCR) in kbps with
           Cell Loss Priority bit set to 1 (clp01)."
        ::= { caqVccParamsEntry 5 }

caqVccParamsScrIn0      OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Sustained Cell Rate (SCR) in kbps
           for connection with VBR type of QoS and
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 6 }

caqVccParamsScrIn01     OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Sustained Cell Rate (SCR) in kbps
           for connection with VBR type of QoS and
           Cell Loss Priority bit set to 1 (clp01)."
        ::= { caqVccParamsEntry 7 }

caqVccParamsScrOut0     OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Sustained Cell Rate (SCR) in kbps
           for connection with VBR type of QoS and
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 8 }

caqVccParamsScrOut01    OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Sustained Cell Rate (SCR) in kbps
           for connection with VBR type of QoS and
           Cell Loss Priority bit set to 1 (clp01)."
        ::= { caqVccParamsEntry 9 }

caqVccParamsBcsIn0      OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Burst Cell Size (BCS) for connection
           with VBR type of QoS and
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 10 }

caqVccParamsBcsIn01     OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Burst Cell Size (BCS) for connection
           with VBR type of QoS and
           Cell Loss Priority bit set to 1 (clp01)."
        ::= { caqVccParamsEntry 11 }

caqVccParamsBcsOut0     OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Burst Cell Size (BCS) for connection
           with VBR type of QoS and 
           Cell Loss Priority bit set to 0 (clp0)."
        ::= { caqVccParamsEntry 12 }

caqVccParamsBcsOut01    OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Burst Cell Size (BCS) for connection
           with VBR type of QoS and
           Cell Loss Priority bit set to 1 (clp01)."
        ::= { caqVccParamsEntry 13 }

caqVccParamsInheritLevel      OBJECT-TYPE
        SYNTAX          VcParamConfigLocation
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "The source of configuration for peak cell rate."
        ::= { caqVccParamsEntry 14 }

caqVccParamsMcrIn       OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Input Minimum Cell Rate (MCR) in kbps for
           connection with VBR-nrt or ABR type of QoS."
        ::= { caqVccParamsEntry 15 } 

caqVccParamsMcrOut      OBJECT-TYPE
        SYNTAX          Unsigned32  
        MAX-ACCESS      read-write 
        STATUS          current
        DESCRIPTION
          "Output Minimum Cell Rate (MCR) in kbps for
           connection with VBR-nrt or ABR type of QoS."
        ::= { caqVccParamsEntry 16 }

caqVccParamsInvRdf      OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Inverse of rate decrease factor."
        ::= { caqVccParamsEntry 17 }
  
caqVccParamsInvRif      OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Inverse of rate increase factor."
        ::= { caqVccParamsEntry 18 }
  
caqVccParamsRfl         OBJECT-TYPE
        SYNTAX          VcParamConfigLocation
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "The source of configuration for rate factor."
        ::= { caqVccParamsEntry 19 }
      
caqVccParamsCdv         OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
          "Cell delay variation."
        ::= { caqVccParamsEntry 20 }
      
caqVccParamsCdvt        OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Cell delay variation tolerance."
        ::= { caqVccParamsEntry 21 }
      
caqVccParamsIcr         OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Initial cell rate."
        ::= { caqVccParamsEntry 22 }
      
caqVccParamsTbe         OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Transient buffer exposure."
        ::= { caqVccParamsEntry 23 }

caqVccParamsFrtt        OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Fixed round-trip time."
        ::= { caqVccParamsEntry 24 }
      
caqVccParamsNrm         OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Maximum number of tx cells for each forward rm cell."
        ::= { caqVccParamsEntry 25 }
      
caqVccParamsInvTrm      OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Maximum time between forward rm cells."
        ::= { caqVccParamsEntry 26 }
      
caqVccParamsInvCdf      OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Inverse of cutoff decrease factor."
        ::= { caqVccParamsEntry 27 }
      
caqVccParamsAdtf        OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
          "Allowed cell rate decrease time factor."
        ::= { caqVccParamsEntry 28 }

-- (End of caqVccParamsTable)
--
--

        
--
--
-- Per-VP traffic shaping parameters.
-- (Beginning of caqVpcParamsTable)

caqVpcParamsTable       OBJECT-TYPE
      SYNTAX            SEQUENCE OF CaqVpcParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This table is defined to provide QoS information for
         each active ATM VP existing on the interface."
      ::= { caqVpcParams 1 }

caqVpcParamsEntry       OBJECT-TYPE
      SYNTAX            CaqVpcParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This list contains the ATM QoS parameters provided by
         ciscoAtmQosVpcEntry."
      INDEX { ifIndex, atmVplVpi }
      ::= { caqVpcParamsTable 1 }

CaqVpcParamsEntry ::= SEQUENCE {
      caqVpcParamsVpState           VpState,
      caqVpcParamsPeakRate          Unsigned32,
      caqVpcParamsCesRate           Unsigned32,
      caqVpcParamsDataVcCount       Integer32,
      caqVpcParamsCesVcCount        Integer32,
      caqVpcParamsVcdF4Seg          Integer32,
      caqVpcParamsVcdF4Ete          Integer32,
      caqVpcParamsScr               Unsigned32,
      caqVpcParamsMbs               Unsigned32,
      caqVpcParamsAvailBw           Unsigned32
      }

caqVpcParamsVpState     OBJECT-TYPE
        SYNTAX          VpState 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "VP state of the current permanent virtual path."
        ::= { caqVpcParamsEntry 1 } 

caqVpcParamsPeakRate    OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Maximum rate in kbps at which the associated
               permanent virtual path can transmit data."
        ::= { caqVpcParamsEntry 2 } 

caqVpcParamsCesRate     OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Maximum rate in kbps at which CES VCs can transmit
               data with the associated permanent virtual path."
        ::= { caqVpcParamsEntry 3 } 

caqVpcParamsDataVcCount OBJECT-TYPE
        SYNTAX          Integer32 (0..65535)
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Number of data VCs currently associated with
               the permanent virtual path."
        ::= { caqVpcParamsEntry 4 } 

caqVpcParamsCesVcCount  OBJECT-TYPE
        SYNTAX          Integer32 (0..65535)
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Number of CES VCs currently associated with
               the permanent virtual path."
        ::= { caqVpcParamsEntry 5 } 

caqVpcParamsVcdF4Seg    OBJECT-TYPE
        SYNTAX          Integer32 (0..65535)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
              "Vcd for F4 OAM segment processing."
        ::= { caqVpcParamsEntry 6 } 

caqVpcParamsVcdF4Ete    OBJECT-TYPE
        SYNTAX          Integer32 (0..65535)
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
              "Vcd for F4 OAM end to end processing."
        ::= { caqVpcParamsEntry 7 } 

caqVpcParamsScr         OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
              "Sustained cell rate associated with the PVP."
        ::= { caqVpcParamsEntry 8 } 

caqVpcParamsMbs         OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Maximum burst size associated with the PVP."
        ::= { caqVpcParamsEntry 9 } 

caqVpcParamsAvailBw     OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Bandwidth in Kbps currently currently available
               on this PVP."
        ::= { caqVpcParamsEntry 10 } 

-- End of caqVpcParamsTable
--
--


        
--
--
-- Per-VC queuing parameters
-- Beginning of caqQueuingParamsTable

caqQueuingParamsTable   OBJECT-TYPE
      SYNTAX            SEQUENCE OF CaqQueuingParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This table provides queuing related information
         for a VC existing on an ATM interface."
      ::= { caqQueuingParams 1 }

caqQueuingParamsEntry   OBJECT-TYPE
      SYNTAX            CaqQueuingParamsEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This is defined as an entry in caqQueuingParamsTable."
      INDEX { ifIndex, atmVclVpi, atmVclVci }
      ::= { caqQueuingParamsTable 1 }

CaqQueuingParamsEntry ::= SEQUENCE {
        caqQueuingParamsMeanQDepth  Unsigned32
      }

caqQueuingParamsMeanQDepth      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Mean Queue Depth associated with the vc.  This value
               is calculated based on the actual queue depth on the
               interface and the exponential weighting constant."
        ::= { caqQueuingParamsEntry 1 } 


-- (End of caqQueuingParamsTable)
--
--



--
--
-- (Beginning of caqQueuingParamsClassTable)

caqQueuingParamsClassTable     OBJECT-TYPE
      SYNTAX            SEQUENCE OF CaqQueuingParamsClassEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This table provides queuing information for all 
         queuing classes associating with a VC."
      ::= { caqQueuingParams 2 }

caqQueuingParamsClassEntry     OBJECT-TYPE
      SYNTAX            CaqQueuingParamsClassEntry
      MAX-ACCESS        not-accessible
      STATUS            current
      DESCRIPTION
        "This is defined as an entry in ciscoAtmQosVcQueuingClassTable
         to provide queuing information of a specific class."
      INDEX { ifIndex, atmVclVpi, atmVclVci, 
              caqQueuingParamsClassIndex }
      ::= { caqQueuingParamsClassTable 1 }

CaqQueuingParamsClassEntry ::= SEQUENCE {
      caqQueuingParamsClassIndex      Integer32,
      caqQueuingParamsClassRandDrp    Unsigned32,
      caqQueuingParamsClassTailDrp    Unsigned32,
      caqQueuingParamsClassMinThre    Unsigned32,
      caqQueuingParamsClassMaxThre    Unsigned32,
      caqQueuingParamsClassMrkProb    Unsigned32
      }

caqQueuingParamsClassIndex      OBJECT-TYPE
        SYNTAX          Integer32 (0..8) 
        MAX-ACCESS      not-accessible 
        STATUS          current
        DESCRIPTION
              "A class index, which associates with an IP precedence
               (0 to 8), is defined to reference individual
               caqQueuingParamsClassEntry."
        ::= { caqQueuingParamsClassEntry 1 } 

caqQueuingParamsClassRandDrp      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Number of packets dropped when Mean Queue
               Length is between Minimum Threshold and
               Maximum Threshold range."
        ::= { caqQueuingParamsClassEntry 2 } 

caqQueuingParamsClassTailDrp      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Number of packets dropped because the Mean
               Queue Depth exceeds the Maximum Threshold value."
        ::= { caqQueuingParamsClassEntry 3 } 

caqQueuingParamsClassMinThre      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Minimum Threshold value in kbps."
        ::= { caqQueuingParamsClassEntry 4 } 

caqQueuingParamsClassMaxThre      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Maximum Threshold value in kbps."
        ::= { caqQueuingParamsClassEntry 5 } 

caqQueuingParamsClassMrkProb      OBJECT-TYPE
        SYNTAX          Unsigned32 
        MAX-ACCESS      read-only 
        STATUS          current
        DESCRIPTION
              "Mark probability denominator.  This is the value used
               in the calculation of a packet being dropped when
               the average queue size is between the minimum
               threshold and the maximum threshold."
        ::= { caqQueuingParamsClassEntry 6 } 


-- (End of caqQueuingParamsClassTable)
--
--

      
-- Conformance Information
 
ciscoAtmQosMIBCompliances OBJECT IDENTIFIER 
                                 ::= { ciscoAtmQosMIBConform 1 }
ciscoAtmQosMIBGroups      OBJECT IDENTIFIER
                                 ::= { ciscoAtmQosMIBConform 2 }

-- Compliance Statement 
ciscoAtmQosMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for entities which implement
                this Cisco ATM QoS MIB."
        MODULE  -- this module
        MANDATORY-GROUPS { ciscoAtmQosVccGroup,
                           ciscoAtmQosVpcGroup,
                           ciscoAtmQosVcQueuingGroup
                         }
                         
        OBJECT  caqVccParamsType
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsPcrIn0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsPcrIn01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsPcrOut0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsPcrOut01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsScrIn0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsScrIn01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsScrOut0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsScrOut01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsBcsIn0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsBcsIn01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsBcsOut0
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsBcsOut01
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsMcrIn
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsMcrOut
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsInvRdf
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsInvRif
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsCdvt
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsIcr
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsTbe
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsFrtt
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsNrm
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."

        OBJECT  caqVccParamsInvTrm
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access is not required."
            
        GROUP   ciscoAtmQosVccAddon1Group
        DESCRIPTION
            "This group is optional."

        GROUP   ciscoAtmQosVpcAddon1Group
        DESCRIPTION
            "This group is optional."

        ::= { ciscoAtmQosMIBCompliances 1 }
 
-- units of conformance:
 
ciscoAtmQosVccGroup OBJECT-GROUP
        OBJECTS {
            caqVccParamsType,
            caqVccParamsPcrIn0,
            caqVccParamsPcrIn01,
            caqVccParamsPcrOut0,
            caqVccParamsPcrOut01,
            caqVccParamsScrIn0,
            caqVccParamsScrIn01,
            caqVccParamsScrOut0,
            caqVccParamsScrOut01,
            caqVccParamsBcsIn0,
            caqVccParamsBcsIn01,
            caqVccParamsBcsOut0,
            caqVccParamsBcsOut01,
            caqVccParamsInheritLevel,
            caqVccParamsMcrIn,
            caqVccParamsMcrOut,
            caqVccParamsInvRdf,
            caqVccParamsInvRif,
            caqVccParamsRfl
        }
        STATUS  current
        DESCRIPTION
                "A collection of objects providing per-VC 
                 ATM QoS related info."
        ::= { ciscoAtmQosMIBGroups 1 }
        
ciscoAtmQosVccAddon1Group OBJECT-GROUP
        OBJECTS {
            caqVccParamsCdv,
            caqVccParamsCdvt,
            caqVccParamsIcr,
            caqVccParamsTbe,
            caqVccParamsFrtt,
            caqVccParamsNrm,
            caqVccParamsInvTrm,
            caqVccParamsInvCdf,
            caqVccParamsAdtf
        }
        STATUS  current
        DESCRIPTION
                "Add-on objects providing per-VC 
                 ATM QoS related info."
        ::= { ciscoAtmQosMIBGroups 2 }

ciscoAtmQosVpcGroup OBJECT-GROUP
        OBJECTS {
            caqVpcParamsVpState,
            caqVpcParamsPeakRate,
            caqVpcParamsCesRate,
            caqVpcParamsDataVcCount,
            caqVpcParamsCesVcCount,
            caqVpcParamsVcdF4Seg,
            caqVpcParamsVcdF4Ete,
            caqVpcParamsScr,
            caqVpcParamsMbs
        }
        STATUS  current
        DESCRIPTION
                "A collection of objects providing per-VP 
                 ATM QoS related info."
        ::= { ciscoAtmQosMIBGroups 3 }
        
ciscoAtmQosVpcAddon1Group OBJECT-GROUP
        OBJECTS {
            caqVpcParamsAvailBw
        }
        STATUS  current
        DESCRIPTION
                "Add-on objects providing per-VP 
                 ATM QoS related info."
        ::= { ciscoAtmQosMIBGroups 4 }
        
ciscoAtmQosVcQueuingGroup OBJECT-GROUP
        OBJECTS {
            caqQueuingParamsMeanQDepth,
            caqQueuingParamsClassRandDrp,
            caqQueuingParamsClassTailDrp,
            caqQueuingParamsClassMinThre,
            caqQueuingParamsClassMaxThre,
            caqQueuingParamsClassMrkProb
        }
        STATUS  current
        DESCRIPTION
                "A collection of objects providing per-VC 
                 queuing/buffering related info."
        ::= { ciscoAtmQosMIBGroups 5 }
        

END