Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

MD2 VA3 USA board #22

Open
RigoHoward opened this issue May 10, 2021 · 8 comments
Open

MD2 VA3 USA board #22

RigoHoward opened this issue May 10, 2021 · 8 comments

Comments

@RigoHoward
Copy link

Hello, first of all this modification its awesome so many props for this!!

Im interested to modify my MD2 VA3 NTSC console with it, but i see there isnt an specific diagram for it.

Here are some.pictures of the board for reference

IMG_20210510_162717
IMG_20210510_162744

I see some coincidences with the MD2 diagram on the wiki, but the cutting points it seems there are not the same.

Thank you again in advance and im hoping that the mod would be possible on my console :)

@SukkoPera
Copy link
Owner

Well, there's not much I can say without having the boards in my hands. If you have a multimeter you can poke around a bit. Maybe @chulpanovich can help?

@chulpanovich
Copy link

Hello. I have had experience with successful installation in VA3. But I need a little time to find my notes.

@chulpanovich
Copy link

image

@SukkoPera
Copy link
Owner

That is great, thanks a lot!

@RigoHoward Please test and report!

@RigoHoward
Copy link
Author

All right guys that was fast, i will do the modification and write back about the results ;)

@RigoHoward
Copy link
Author

Okay, here is my installation (not tested yet)
IMG_20210513_172911
IMG_20210513_172830
IMG_20210513_172804
IMG_20210513_172738
IMG_20210513_172655

@RigoHoward
Copy link
Author

RigoHoward commented May 13, 2021

@chulpanovich do i need to desolder the reset button and lift the legs still?

@chulpanovich
Copy link

@chulpanovich do i need to desolder the reset button and lift the legs still?
In your case, you do not need to unsolder the button and raise your legs if you cut off the track.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

3 participants