/
mesh.c
2076 lines (1881 loc) · 52.6 KB
/
mesh.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* SCSI low-level driver for the MESH (Macintosh Enhanced SCSI Hardware)
* bus adaptor found on Power Macintosh computers.
* We assume the MESH is connected to a DBDMA (descriptor-based DMA)
* controller.
*
* Paul Mackerras, August 1996.
* Copyright (C) 1996 Paul Mackerras.
*
* Apr. 21 2002 - BenH Rework bus reset code for new error handler
* Add delay after initial bus reset
* Add module parameters
*
* Sep. 27 2003 - BenH Move to new driver model, fix some write posting
* issues
* To do:
* - handle aborts correctly
* - retry arbitration if lost (unless higher levels do this for us)
* - power down the chip when no device is detected
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/hydra.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
#include <asm/macio.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include "mesh.h"
#if 1
#undef KERN_DEBUG
#define KERN_DEBUG KERN_WARNING
#endif
MODULE_AUTHOR("Paul Mackerras (paulus@samba.org)");
MODULE_DESCRIPTION("PowerMac MESH SCSI driver");
MODULE_LICENSE("GPL");
static int sync_rate = CONFIG_SCSI_MESH_SYNC_RATE;
static int sync_targets = 0xff;
static int resel_targets = 0xff;
static int debug_targets = 0; /* print debug for these targets */
static int init_reset_delay = CONFIG_SCSI_MESH_RESET_DELAY_MS;
module_param(sync_rate, int, 0);
MODULE_PARM_DESC(sync_rate, "Synchronous rate (0..10, 0=async)");
module_param(sync_targets, int, 0);
MODULE_PARM_DESC(sync_targets, "Bitmask of targets allowed to set synchronous");
module_param(resel_targets, int, 0);
MODULE_PARM_DESC(resel_targets, "Bitmask of targets allowed to set disconnect");
module_param(debug_targets, int, 0644);
MODULE_PARM_DESC(debug_targets, "Bitmask of debugged targets");
module_param(init_reset_delay, int, 0);
MODULE_PARM_DESC(init_reset_delay, "Initial bus reset delay (0=no reset)");
static int mesh_sync_period = 100;
static int mesh_sync_offset = 0;
static unsigned char use_active_neg = 0; /* bit mask for SEQ_ACTIVE_NEG if used */
#define ALLOW_SYNC(tgt) ((sync_targets >> (tgt)) & 1)
#define ALLOW_RESEL(tgt) ((resel_targets >> (tgt)) & 1)
#define ALLOW_DEBUG(tgt) ((debug_targets >> (tgt)) & 1)
#define DEBUG_TARGET(cmd) ((cmd) && ALLOW_DEBUG((cmd)->device->id))
#undef MESH_DBG
#define N_DBG_LOG 50
#define N_DBG_SLOG 20
#define NUM_DBG_EVENTS 13
#undef DBG_USE_TB /* bombs on 601 */
struct dbglog {
char *fmt;
u32 tb;
u8 phase;
u8 bs0;
u8 bs1;
u8 tgt;
int d;
};
enum mesh_phase {
idle,
arbitrating,
selecting,
commanding,
dataing,
statusing,
busfreeing,
disconnecting,
reselecting,
sleeping
};
enum msg_phase {
msg_none,
msg_out,
msg_out_xxx,
msg_out_last,
msg_in,
msg_in_bad,
};
enum sdtr_phase {
do_sdtr,
sdtr_sent,
sdtr_done
};
struct mesh_target {
enum sdtr_phase sdtr_state;
int sync_params;
int data_goes_out; /* guess as to data direction */
struct scsi_cmnd *current_req;
u32 saved_ptr;
#ifdef MESH_DBG
int log_ix;
int n_log;
struct dbglog log[N_DBG_LOG];
#endif
};
struct mesh_state {
volatile struct mesh_regs __iomem *mesh;
int meshintr;
volatile struct dbdma_regs __iomem *dma;
int dmaintr;
struct Scsi_Host *host;
struct mesh_state *next;
struct scsi_cmnd *request_q;
struct scsi_cmnd *request_qtail;
enum mesh_phase phase; /* what we're currently trying to do */
enum msg_phase msgphase;
int conn_tgt; /* target we're connected to */
struct scsi_cmnd *current_req; /* req we're currently working on */
int data_ptr;
int dma_started;
int dma_count;
int stat;
int aborting;
int expect_reply;
int n_msgin;
u8 msgin[16];
int n_msgout;
int last_n_msgout;
u8 msgout[16];
struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */
dma_addr_t dma_cmd_bus;
void *dma_cmd_space;
int dma_cmd_size;
int clk_freq;
struct mesh_target tgts[8];
struct macio_dev *mdev;
struct pci_dev* pdev;
#ifdef MESH_DBG
int log_ix;
int n_log;
struct dbglog log[N_DBG_SLOG];
#endif
};
/*
* Driver is too messy, we need a few prototypes...
*/
static void mesh_done(struct mesh_state *ms, int start_next);
static void mesh_interrupt(struct mesh_state *ms);
static void cmd_complete(struct mesh_state *ms);
static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd);
static void halt_dma(struct mesh_state *ms);
static void phase_mismatch(struct mesh_state *ms);
/*
* Some debugging & logging routines
*/
#ifdef MESH_DBG
static inline u32 readtb(void)
{
u32 tb;
#ifdef DBG_USE_TB
/* Beware: if you enable this, it will crash on 601s. */
asm ("mftb %0" : "=r" (tb) : );
#else
tb = 0;
#endif
return tb;
}
static void dlog(struct mesh_state *ms, char *fmt, int a)
{
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
struct dbglog *tlp, *slp;
tlp = &tp->log[tp->log_ix];
slp = &ms->log[ms->log_ix];
tlp->fmt = fmt;
tlp->tb = readtb();
tlp->phase = (ms->msgphase << 4) + ms->phase;
tlp->bs0 = ms->mesh->bus_status0;
tlp->bs1 = ms->mesh->bus_status1;
tlp->tgt = ms->conn_tgt;
tlp->d = a;
*slp = *tlp;
if (++tp->log_ix >= N_DBG_LOG)
tp->log_ix = 0;
if (tp->n_log < N_DBG_LOG)
++tp->n_log;
if (++ms->log_ix >= N_DBG_SLOG)
ms->log_ix = 0;
if (ms->n_log < N_DBG_SLOG)
++ms->n_log;
}
static void dumplog(struct mesh_state *ms, int t)
{
struct mesh_target *tp = &ms->tgts[t];
struct dbglog *lp;
int i;
if (tp->n_log == 0)
return;
i = tp->log_ix - tp->n_log;
if (i < 0)
i += N_DBG_LOG;
tp->n_log = 0;
do {
lp = &tp->log[i];
printk(KERN_DEBUG "mesh log %d: bs=%.2x%.2x ph=%.2x ",
t, lp->bs1, lp->bs0, lp->phase);
#ifdef DBG_USE_TB
printk("tb=%10u ", lp->tb);
#endif
printk(lp->fmt, lp->d);
printk("\n");
if (++i >= N_DBG_LOG)
i = 0;
} while (i != tp->log_ix);
}
static void dumpslog(struct mesh_state *ms)
{
struct dbglog *lp;
int i;
if (ms->n_log == 0)
return;
i = ms->log_ix - ms->n_log;
if (i < 0)
i += N_DBG_SLOG;
ms->n_log = 0;
do {
lp = &ms->log[i];
printk(KERN_DEBUG "mesh log: bs=%.2x%.2x ph=%.2x t%d ",
lp->bs1, lp->bs0, lp->phase, lp->tgt);
#ifdef DBG_USE_TB
printk("tb=%10u ", lp->tb);
#endif
printk(lp->fmt, lp->d);
printk("\n");
if (++i >= N_DBG_SLOG)
i = 0;
} while (i != ms->log_ix);
}
#else
static inline void dlog(struct mesh_state *ms, char *fmt, int a)
{}
static inline void dumplog(struct mesh_state *ms, int tgt)
{}
static inline void dumpslog(struct mesh_state *ms)
{}
#endif /* MESH_DBG */
#define MKWORD(a, b, c, d) (((a) << 24) + ((b) << 16) + ((c) << 8) + (d))
static void
mesh_dump_regs(struct mesh_state *ms)
{
volatile struct mesh_regs __iomem *mr = ms->mesh;
volatile struct dbdma_regs __iomem *md = ms->dma;
int t;
struct mesh_target *tp;
printk(KERN_DEBUG "mesh: state at %p, regs at %p, dma at %p\n",
ms, mr, md);
printk(KERN_DEBUG " ct=%4x seq=%2x bs=%4x fc=%2x "
"exc=%2x err=%2x im=%2x int=%2x sp=%2x\n",
(mr->count_hi << 8) + mr->count_lo, mr->sequence,
(mr->bus_status1 << 8) + mr->bus_status0, mr->fifo_count,
mr->exception, mr->error, mr->intr_mask, mr->interrupt,
mr->sync_params);
while(in_8(&mr->fifo_count))
printk(KERN_DEBUG " fifo data=%.2x\n",in_8(&mr->fifo));
printk(KERN_DEBUG " dma stat=%x cmdptr=%x\n",
in_le32(&md->status), in_le32(&md->cmdptr));
printk(KERN_DEBUG " phase=%d msgphase=%d conn_tgt=%d data_ptr=%d\n",
ms->phase, ms->msgphase, ms->conn_tgt, ms->data_ptr);
printk(KERN_DEBUG " dma_st=%d dma_ct=%d n_msgout=%d\n",
ms->dma_started, ms->dma_count, ms->n_msgout);
for (t = 0; t < 8; ++t) {
tp = &ms->tgts[t];
if (tp->current_req == NULL)
continue;
printk(KERN_DEBUG " target %d: req=%p goes_out=%d saved_ptr=%d\n",
t, tp->current_req, tp->data_goes_out, tp->saved_ptr);
}
}
/*
* Flush write buffers on the bus path to the mesh
*/
static inline void mesh_flush_io(volatile struct mesh_regs __iomem *mr)
{
(void)in_8(&mr->mesh_id);
}
/*
* Complete a SCSI command
*/
static void mesh_completed(struct mesh_state *ms, struct scsi_cmnd *cmd)
{
(*cmd->scsi_done)(cmd);
}
/* Called with meshinterrupt disabled, initialize the chipset
* and eventually do the initial bus reset. The lock must not be
* held since we can schedule.
*/
static void mesh_init(struct mesh_state *ms)
{
volatile struct mesh_regs __iomem *mr = ms->mesh;
volatile struct dbdma_regs __iomem *md = ms->dma;
mesh_flush_io(mr);
udelay(100);
/* Reset controller */
out_le32(&md->control, (RUN|PAUSE|FLUSH|WAKE) << 16); /* stop dma */
out_8(&mr->exception, 0xff); /* clear all exception bits */
out_8(&mr->error, 0xff); /* clear all error bits */
out_8(&mr->sequence, SEQ_RESETMESH);
mesh_flush_io(mr);
udelay(10);
out_8(&mr->intr_mask, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
out_8(&mr->source_id, ms->host->this_id);
out_8(&mr->sel_timeout, 25); /* 250ms */
out_8(&mr->sync_params, ASYNC_PARAMS);
if (init_reset_delay) {
printk(KERN_INFO "mesh: performing initial bus reset...\n");
/* Reset bus */
out_8(&mr->bus_status1, BS1_RST); /* assert RST */
mesh_flush_io(mr);
udelay(30); /* leave it on for >= 25us */
out_8(&mr->bus_status1, 0); /* negate RST */
mesh_flush_io(mr);
/* Wait for bus to come back */
msleep(init_reset_delay);
}
/* Reconfigure controller */
out_8(&mr->interrupt, 0xff); /* clear all interrupt bits */
out_8(&mr->sequence, SEQ_FLUSHFIFO);
mesh_flush_io(mr);
udelay(1);
out_8(&mr->sync_params, ASYNC_PARAMS);
out_8(&mr->sequence, SEQ_ENBRESEL);
ms->phase = idle;
ms->msgphase = msg_none;
}
static void mesh_start_cmd(struct mesh_state *ms, struct scsi_cmnd *cmd)
{
volatile struct mesh_regs __iomem *mr = ms->mesh;
int t, id;
id = cmd->device->id;
ms->current_req = cmd;
ms->tgts[id].data_goes_out = cmd->sc_data_direction == DMA_TO_DEVICE;
ms->tgts[id].current_req = cmd;
#if 1
if (DEBUG_TARGET(cmd)) {
int i;
printk(KERN_DEBUG "mesh_start: %p tgt=%d cmd=", cmd, id);
for (i = 0; i < cmd->cmd_len; ++i)
printk(" %x", cmd->cmnd[i]);
printk(" use_sg=%d buffer=%p bufflen=%u\n",
scsi_sg_count(cmd), scsi_sglist(cmd), scsi_bufflen(cmd));
}
#endif
if (ms->dma_started)
panic("mesh: double DMA start !\n");
ms->phase = arbitrating;
ms->msgphase = msg_none;
ms->data_ptr = 0;
ms->dma_started = 0;
ms->n_msgout = 0;
ms->last_n_msgout = 0;
ms->expect_reply = 0;
ms->conn_tgt = id;
ms->tgts[id].saved_ptr = 0;
ms->stat = DID_OK;
ms->aborting = 0;
#ifdef MESH_DBG
ms->tgts[id].n_log = 0;
dlog(ms, "start cmd=%x", (int) cmd);
#endif
/* Off we go */
dlog(ms, "about to arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception, mr->error, mr->fifo_count));
out_8(&mr->interrupt, INT_CMDDONE);
out_8(&mr->sequence, SEQ_ENBRESEL);
mesh_flush_io(mr);
udelay(1);
if (in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) {
/*
* Some other device has the bus or is arbitrating for it -
* probably a target which is about to reselect us.
*/
dlog(ms, "busy b4 arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception,
mr->error, mr->fifo_count));
for (t = 100; t > 0; --t) {
if ((in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) == 0)
break;
if (in_8(&mr->interrupt) != 0) {
dlog(ms, "intr b4 arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception,
mr->error, mr->fifo_count));
mesh_interrupt(ms);
if (ms->phase != arbitrating)
return;
}
udelay(1);
}
if (in_8(&mr->bus_status1) & (BS1_BSY | BS1_SEL)) {
/* XXX should try again in a little while */
ms->stat = DID_BUS_BUSY;
ms->phase = idle;
mesh_done(ms, 0);
return;
}
}
/*
* Apparently the mesh has a bug where it will assert both its
* own bit and the target's bit on the bus during arbitration.
*/
out_8(&mr->dest_id, mr->source_id);
/*
* There appears to be a race with reselection sometimes,
* where a target reselects us just as we issue the
* arbitrate command. It seems that then the arbitrate
* command just hangs waiting for the bus to be free
* without giving us a reselection exception.
* The only way I have found to get it to respond correctly
* is this: disable reselection before issuing the arbitrate
* command, then after issuing it, if it looks like a target
* is trying to reselect us, reset the mesh and then enable
* reselection.
*/
out_8(&mr->sequence, SEQ_DISRESEL);
if (in_8(&mr->interrupt) != 0) {
dlog(ms, "intr after disresel, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception,
mr->error, mr->fifo_count));
mesh_interrupt(ms);
if (ms->phase != arbitrating)
return;
dlog(ms, "after intr after disresel, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception,
mr->error, mr->fifo_count));
}
out_8(&mr->sequence, SEQ_ARBITRATE);
for (t = 230; t > 0; --t) {
if (in_8(&mr->interrupt) != 0)
break;
udelay(1);
}
dlog(ms, "after arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception, mr->error, mr->fifo_count));
if (in_8(&mr->interrupt) == 0 && (in_8(&mr->bus_status1) & BS1_SEL)
&& (in_8(&mr->bus_status0) & BS0_IO)) {
/* looks like a reselection - try resetting the mesh */
dlog(ms, "resel? after arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception, mr->error, mr->fifo_count));
out_8(&mr->sequence, SEQ_RESETMESH);
mesh_flush_io(mr);
udelay(10);
out_8(&mr->interrupt, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
out_8(&mr->intr_mask, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
out_8(&mr->sequence, SEQ_ENBRESEL);
mesh_flush_io(mr);
for (t = 10; t > 0 && in_8(&mr->interrupt) == 0; --t)
udelay(1);
dlog(ms, "tried reset after arb, intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception, mr->error, mr->fifo_count));
#ifndef MESH_MULTIPLE_HOSTS
if (in_8(&mr->interrupt) == 0 && (in_8(&mr->bus_status1) & BS1_SEL)
&& (in_8(&mr->bus_status0) & BS0_IO)) {
printk(KERN_ERR "mesh: controller not responding"
" to reselection!\n");
/*
* If this is a target reselecting us, and the
* mesh isn't responding, the higher levels of
* the scsi code will eventually time out and
* reset the bus.
*/
}
#endif
}
}
/*
* Start the next command for a MESH.
* Should be called with interrupts disabled.
*/
static void mesh_start(struct mesh_state *ms)
{
struct scsi_cmnd *cmd, *prev, *next;
if (ms->phase != idle || ms->current_req != NULL) {
printk(KERN_ERR "inappropriate mesh_start (phase=%d, ms=%p)",
ms->phase, ms);
return;
}
while (ms->phase == idle) {
prev = NULL;
for (cmd = ms->request_q; ; cmd = (struct scsi_cmnd *) cmd->host_scribble) {
if (cmd == NULL)
return;
if (ms->tgts[cmd->device->id].current_req == NULL)
break;
prev = cmd;
}
next = (struct scsi_cmnd *) cmd->host_scribble;
if (prev == NULL)
ms->request_q = next;
else
prev->host_scribble = (void *) next;
if (next == NULL)
ms->request_qtail = prev;
mesh_start_cmd(ms, cmd);
}
}
static void mesh_done(struct mesh_state *ms, int start_next)
{
struct scsi_cmnd *cmd;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
cmd = ms->current_req;
ms->current_req = NULL;
tp->current_req = NULL;
if (cmd) {
cmd->result = (ms->stat << 16) + cmd->SCp.Status;
if (ms->stat == DID_OK)
cmd->result += (cmd->SCp.Message << 8);
if (DEBUG_TARGET(cmd)) {
printk(KERN_DEBUG "mesh_done: result = %x, data_ptr=%d, buflen=%d\n",
cmd->result, ms->data_ptr, scsi_bufflen(cmd));
#if 0
/* needs to use sg? */
if ((cmd->cmnd[0] == 0 || cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 3)
&& cmd->request_buffer != 0) {
unsigned char *b = cmd->request_buffer;
printk(KERN_DEBUG "buffer = %x %x %x %x %x %x %x %x\n",
b[0], b[1], b[2], b[3], b[4], b[5], b[6], b[7]);
}
#endif
}
cmd->SCp.this_residual -= ms->data_ptr;
mesh_completed(ms, cmd);
}
if (start_next) {
out_8(&ms->mesh->sequence, SEQ_ENBRESEL);
mesh_flush_io(ms->mesh);
udelay(1);
ms->phase = idle;
mesh_start(ms);
}
}
static inline void add_sdtr_msg(struct mesh_state *ms)
{
int i = ms->n_msgout;
ms->msgout[i] = EXTENDED_MESSAGE;
ms->msgout[i+1] = 3;
ms->msgout[i+2] = EXTENDED_SDTR;
ms->msgout[i+3] = mesh_sync_period/4;
ms->msgout[i+4] = (ALLOW_SYNC(ms->conn_tgt)? mesh_sync_offset: 0);
ms->n_msgout = i + 5;
}
static void set_sdtr(struct mesh_state *ms, int period, int offset)
{
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
volatile struct mesh_regs __iomem *mr = ms->mesh;
int v, tr;
tp->sdtr_state = sdtr_done;
if (offset == 0) {
/* asynchronous */
if (SYNC_OFF(tp->sync_params))
printk(KERN_INFO "mesh: target %d now asynchronous\n",
ms->conn_tgt);
tp->sync_params = ASYNC_PARAMS;
out_8(&mr->sync_params, ASYNC_PARAMS);
return;
}
/*
* We need to compute ceil(clk_freq * period / 500e6) - 2
* without incurring overflow.
*/
v = (ms->clk_freq / 5000) * period;
if (v <= 250000) {
/* special case: sync_period == 5 * clk_period */
v = 0;
/* units of tr are 100kB/s */
tr = (ms->clk_freq + 250000) / 500000;
} else {
/* sync_period == (v + 2) * 2 * clk_period */
v = (v + 99999) / 100000 - 2;
if (v > 15)
v = 15; /* oops */
tr = ((ms->clk_freq / (v + 2)) + 199999) / 200000;
}
if (offset > 15)
offset = 15; /* can't happen */
tp->sync_params = SYNC_PARAMS(offset, v);
out_8(&mr->sync_params, tp->sync_params);
printk(KERN_INFO "mesh: target %d synchronous at %d.%d MB/s\n",
ms->conn_tgt, tr/10, tr%10);
}
static void start_phase(struct mesh_state *ms)
{
int i, seq, nb;
volatile struct mesh_regs __iomem *mr = ms->mesh;
volatile struct dbdma_regs __iomem *md = ms->dma;
struct scsi_cmnd *cmd = ms->current_req;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
dlog(ms, "start_phase nmo/exc/fc/seq = %.8x",
MKWORD(ms->n_msgout, mr->exception, mr->fifo_count, mr->sequence));
out_8(&mr->interrupt, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
seq = use_active_neg + (ms->n_msgout? SEQ_ATN: 0);
switch (ms->msgphase) {
case msg_none:
break;
case msg_in:
out_8(&mr->count_hi, 0);
out_8(&mr->count_lo, 1);
out_8(&mr->sequence, SEQ_MSGIN + seq);
ms->n_msgin = 0;
return;
case msg_out:
/*
* To make sure ATN drops before we assert ACK for
* the last byte of the message, we have to do the
* last byte specially.
*/
if (ms->n_msgout <= 0) {
printk(KERN_ERR "mesh: msg_out but n_msgout=%d\n",
ms->n_msgout);
mesh_dump_regs(ms);
ms->msgphase = msg_none;
break;
}
if (ALLOW_DEBUG(ms->conn_tgt)) {
printk(KERN_DEBUG "mesh: sending %d msg bytes:",
ms->n_msgout);
for (i = 0; i < ms->n_msgout; ++i)
printk(" %x", ms->msgout[i]);
printk("\n");
}
dlog(ms, "msgout msg=%.8x", MKWORD(ms->n_msgout, ms->msgout[0],
ms->msgout[1], ms->msgout[2]));
out_8(&mr->count_hi, 0);
out_8(&mr->sequence, SEQ_FLUSHFIFO);
mesh_flush_io(mr);
udelay(1);
/*
* If ATN is not already asserted, we assert it, then
* issue a SEQ_MSGOUT to get the mesh to drop ACK.
*/
if ((in_8(&mr->bus_status0) & BS0_ATN) == 0) {
dlog(ms, "bus0 was %.2x explicitly asserting ATN", mr->bus_status0);
out_8(&mr->bus_status0, BS0_ATN); /* explicit ATN */
mesh_flush_io(mr);
udelay(1);
out_8(&mr->count_lo, 1);
out_8(&mr->sequence, SEQ_MSGOUT + seq);
out_8(&mr->bus_status0, 0); /* release explicit ATN */
dlog(ms,"hace: after explicit ATN bus0=%.2x",mr->bus_status0);
}
if (ms->n_msgout == 1) {
/*
* We can't issue the SEQ_MSGOUT without ATN
* until the target has asserted REQ. The logic
* in cmd_complete handles both situations:
* REQ already asserted or not.
*/
cmd_complete(ms);
} else {
out_8(&mr->count_lo, ms->n_msgout - 1);
out_8(&mr->sequence, SEQ_MSGOUT + seq);
for (i = 0; i < ms->n_msgout - 1; ++i)
out_8(&mr->fifo, ms->msgout[i]);
}
return;
default:
printk(KERN_ERR "mesh bug: start_phase msgphase=%d\n",
ms->msgphase);
}
switch (ms->phase) {
case selecting:
out_8(&mr->dest_id, ms->conn_tgt);
out_8(&mr->sequence, SEQ_SELECT + SEQ_ATN);
break;
case commanding:
out_8(&mr->sync_params, tp->sync_params);
out_8(&mr->count_hi, 0);
if (cmd) {
out_8(&mr->count_lo, cmd->cmd_len);
out_8(&mr->sequence, SEQ_COMMAND + seq);
for (i = 0; i < cmd->cmd_len; ++i)
out_8(&mr->fifo, cmd->cmnd[i]);
} else {
out_8(&mr->count_lo, 6);
out_8(&mr->sequence, SEQ_COMMAND + seq);
for (i = 0; i < 6; ++i)
out_8(&mr->fifo, 0);
}
break;
case dataing:
/* transfer data, if any */
if (!ms->dma_started) {
set_dma_cmds(ms, cmd);
out_le32(&md->cmdptr, virt_to_phys(ms->dma_cmds));
out_le32(&md->control, (RUN << 16) | RUN);
ms->dma_started = 1;
}
nb = ms->dma_count;
if (nb > 0xfff0)
nb = 0xfff0;
ms->dma_count -= nb;
ms->data_ptr += nb;
out_8(&mr->count_lo, nb);
out_8(&mr->count_hi, nb >> 8);
out_8(&mr->sequence, (tp->data_goes_out?
SEQ_DATAOUT: SEQ_DATAIN) + SEQ_DMA_MODE + seq);
break;
case statusing:
out_8(&mr->count_hi, 0);
out_8(&mr->count_lo, 1);
out_8(&mr->sequence, SEQ_STATUS + seq);
break;
case busfreeing:
case disconnecting:
out_8(&mr->sequence, SEQ_ENBRESEL);
mesh_flush_io(mr);
udelay(1);
dlog(ms, "enbresel intr/exc/err/fc=%.8x",
MKWORD(mr->interrupt, mr->exception, mr->error,
mr->fifo_count));
out_8(&mr->sequence, SEQ_BUSFREE);
break;
default:
printk(KERN_ERR "mesh: start_phase called with phase=%d\n",
ms->phase);
dumpslog(ms);
}
}
static inline void get_msgin(struct mesh_state *ms)
{
volatile struct mesh_regs __iomem *mr = ms->mesh;
int i, n;
n = mr->fifo_count;
if (n != 0) {
i = ms->n_msgin;
ms->n_msgin = i + n;
for (; n > 0; --n)
ms->msgin[i++] = in_8(&mr->fifo);
}
}
static inline int msgin_length(struct mesh_state *ms)
{
int b, n;
n = 1;
if (ms->n_msgin > 0) {
b = ms->msgin[0];
if (b == 1) {
/* extended message */
n = ms->n_msgin < 2? 2: ms->msgin[1] + 2;
} else if (0x20 <= b && b <= 0x2f) {
/* 2-byte message */
n = 2;
}
}
return n;
}
static void reselected(struct mesh_state *ms)
{
volatile struct mesh_regs __iomem *mr = ms->mesh;
struct scsi_cmnd *cmd;
struct mesh_target *tp;
int b, t, prev;
switch (ms->phase) {
case idle:
break;
case arbitrating:
if ((cmd = ms->current_req) != NULL) {
/* put the command back on the queue */
cmd->host_scribble = (void *) ms->request_q;
if (ms->request_q == NULL)
ms->request_qtail = cmd;
ms->request_q = cmd;
tp = &ms->tgts[cmd->device->id];
tp->current_req = NULL;
}
break;
case busfreeing:
ms->phase = reselecting;
mesh_done(ms, 0);
break;
case disconnecting:
break;
default:
printk(KERN_ERR "mesh: reselected in phase %d/%d tgt %d\n",
ms->msgphase, ms->phase, ms->conn_tgt);
dumplog(ms, ms->conn_tgt);
dumpslog(ms);
}
if (ms->dma_started) {
printk(KERN_ERR "mesh: reselected with DMA started !\n");
halt_dma(ms);
}
ms->current_req = NULL;
ms->phase = dataing;
ms->msgphase = msg_in;
ms->n_msgout = 0;
ms->last_n_msgout = 0;
prev = ms->conn_tgt;
/*
* We seem to get abortive reselections sometimes.
*/
while ((in_8(&mr->bus_status1) & BS1_BSY) == 0) {
static int mesh_aborted_resels;
mesh_aborted_resels++;
out_8(&mr->interrupt, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
mesh_flush_io(mr);
udelay(1);
out_8(&mr->sequence, SEQ_ENBRESEL);
mesh_flush_io(mr);
udelay(5);
dlog(ms, "extra resel err/exc/fc = %.6x",
MKWORD(0, mr->error, mr->exception, mr->fifo_count));
}
out_8(&mr->interrupt, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
mesh_flush_io(mr);
udelay(1);
out_8(&mr->sequence, SEQ_ENBRESEL);
mesh_flush_io(mr);
udelay(1);
out_8(&mr->sync_params, ASYNC_PARAMS);
/*
* Find out who reselected us.
*/
if (in_8(&mr->fifo_count) == 0) {
printk(KERN_ERR "mesh: reselection but nothing in fifo?\n");
ms->conn_tgt = ms->host->this_id;
goto bogus;
}
/* get the last byte in the fifo */
do {
b = in_8(&mr->fifo);
dlog(ms, "reseldata %x", b);
} while (in_8(&mr->fifo_count));
for (t = 0; t < 8; ++t)
if ((b & (1 << t)) != 0 && t != ms->host->this_id)
break;
if (b != (1 << t) + (1 << ms->host->this_id)) {
printk(KERN_ERR "mesh: bad reselection data %x\n", b);
ms->conn_tgt = ms->host->this_id;
goto bogus;
}
/*
* Set up to continue with that target's transfer.
*/
ms->conn_tgt = t;
tp = &ms->tgts[t];
out_8(&mr->sync_params, tp->sync_params);
if (ALLOW_DEBUG(t)) {
printk(KERN_DEBUG "mesh: reselected by target %d\n", t);
printk(KERN_DEBUG "mesh: saved_ptr=%x goes_out=%d cmd=%p\n",
tp->saved_ptr, tp->data_goes_out, tp->current_req);
}
ms->current_req = tp->current_req;
if (tp->current_req == NULL) {
printk(KERN_ERR "mesh: reselected by tgt %d but no cmd!\n", t);
goto bogus;
}
ms->data_ptr = tp->saved_ptr;
dlog(ms, "resel prev tgt=%d", prev);
dlog(ms, "resel err/exc=%.4x", MKWORD(0, 0, mr->error, mr->exception));
start_phase(ms);
return;
bogus:
dumplog(ms, ms->conn_tgt);
dumpslog(ms);
ms->data_ptr = 0;
ms->aborting = 1;
start_phase(ms);
}
static void do_abort(struct mesh_state *ms)
{
ms->msgout[0] = ABORT;
ms->n_msgout = 1;
ms->aborting = 1;
ms->stat = DID_ABORT;
dlog(ms, "abort", 0);
}
static void handle_reset(struct mesh_state *ms)
{
int tgt;
struct mesh_target *tp;
struct scsi_cmnd *cmd;
volatile struct mesh_regs __iomem *mr = ms->mesh;
for (tgt = 0; tgt < 8; ++tgt) {
tp = &ms->tgts[tgt];
if ((cmd = tp->current_req) != NULL) {
cmd->result = DID_RESET << 16;
tp->current_req = NULL;
mesh_completed(ms, cmd);
}
ms->tgts[tgt].sdtr_state = do_sdtr;
ms->tgts[tgt].sync_params = ASYNC_PARAMS;